--- libxext-1.3.3.orig/autogen.sh +++ libxext-1.3.3/autogen.sh @@ -0,0 +1,14 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +if test -z "$NOCONFIGURE"; then + $srcdir/configure "$@" +fi --- libxext-1.3.3.orig/debian/README.source +++ libxext-1.3.3/debian/README.source @@ -0,0 +1,73 @@ +------------------------------------------------------ +Quick Guide To Patching This Package For The Impatient +------------------------------------------------------ + +1. Make sure you have quilt installed +2. Unpack the package as usual with "dpkg-source -x" +3. Run the "patch" target in debian/rules +4. Create a new patch with "quilt new" (see quilt(1)) +5. Edit all the files you want to include in the patch with "quilt edit" + (see quilt(1)). +6. Write the patch with "quilt refresh" (see quilt(1)) +7. Run the "clean" target in debian/rules + +Alternatively, instead of using quilt directly, you can drop the patch in to +debian/patches and add the name of the patch to debian/patches/series. + +------------------------------------ +Guide To The X Strike Force Packages +------------------------------------ + +The X Strike Force team maintains X packages in git repositories on +git.debian.org in the pkg-xorg subdirectory. Most upstream packages +are actually maintained in git repositories as well, so they often +just need to be pulled into git.debian.org in a "upstream-*" branch. +Otherwise, the upstream sources are manually installed in the Debian +git repository. + +The .orig.tar.gz upstream source file could be generated using this +"upstream-*" branch in the Debian git repository but it is actually +copied from upstream tarballs directly. + +Due to X.org being highly modular, packaging all X.org applications +as their own independent packages would have created too many Debian +packages. For this reason, some X.org applications have been grouped +into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils, +x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils. +Most packages, including the X.org server itself and all libraries +and drivers are, however maintained independently. + +The Debian packaging is added by creating the "debian-*" git branch +which contains the aforementioned "upstream-*" branch plus the debian/ +repository files. +When a patch has to be applied to the Debian package, two solutions +are involved: +* If the patch is available in one of the upstream branches, it + may be git'cherry-picked into the Debian repository. In this + case, it appears directly in the .diff.gz. +* Otherwise, the patch is added to debian/patches/ which is managed + with quilt as documented in /usr/share/doc/quilt/README.source. + +quilt is actually invoked by the Debian X packaging through a larger +set of scripts called XSFBS. XSFBS brings some other X specific +features such as managing dependencies and conflicts due to the video +and input driver ABIs. +XSFBS itself is maintained in a separate repository at + git://git.debian.org/pkg-xorg/xsfbs.git +and it is pulled inside the other Debian X repositories when needed. + +The XSFBS patching system requires a build dependency on quilt. Also +a dependency on $(STAMP_DIR)/patch has to be added to debian/rules +so that the XSFBS patching occurs before the actual build. So the +very first target of the build (likely the one running autoreconf) +should depend on $(STAMP_DIR)/patch. It should also not depend on +anything so that parallel builds are correctly supported (nothing +should probably run while patching is being done). And finally, the +clean target should depend on the xsfclean target so that patches +are unapplied on clean. + +When the upstream sources contain some DFSG-nonfree files, they are +listed in text files in debian/prune/ in the "debian-*" branch of +the Debian repository. XSFBS' scripts then take care of removing +these listed files during the build so as to generate a modified +DFSG-free .orig.tar.gz tarball. --- libxext-1.3.3.orig/debian/changelog +++ libxext-1.3.3/debian/changelog @@ -0,0 +1,294 @@ +libxext (2:1.3.3-1.1) unstable; urgency=medium + + * Non maintainer upload by the Reproducible Builds team. + * No source change upload to rebuild on buildd with .buildinfo files. + + -- Holger Levsen Fri, 18 Dec 2020 18:58:31 +0100 + +libxext (2:1.3.3-1) unstable; urgency=medium + + * Let uscan verify tarball signatures. + * New upstream release. + * Bump libx11-dev build-dep to 1.6. + * Remove Cyril from Uploaders. + + -- Julien Cristau Sun, 05 Oct 2014 17:34:09 +0200 + +libxext (2:1.3.2-1) unstable; urgency=low + + * New upstream release. + * Bump debhelper compat level to 7. + * Use dpkg-buildflags. + * Disable silent rules. + * Use dh_prep instead of dh_clean -k. + + -- Julien Cristau Mon, 24 Jun 2013 16:14:00 +0200 + +libxext (2:1.3.1-2+deb7u1) wheezy-security; urgency=high + + * integer overflows calculating memory needs for replies [CVE-2013-1982] + + -- Julien Cristau Tue, 14 May 2013 00:46:19 +0200 + +libxext (2:1.3.1-2) unstable; urgency=low + + * Split docs out to a separate libxext-doc package. libxext-dev is now + Multi-Arch: same, and libxext-doc Multi-Arch: foreign. + * Adjust debian/rules so buildds don't have to build the specs. + + -- Julien Cristau Sun, 15 Apr 2012 21:07:20 +0200 + +libxext (2:1.3.1-1) unstable; urgency=low + + * New upstream release. + * Bump xorg-sgml-doctools build-dep per configure.ac. + * Adjust rules for new location of .db files, and set docdir in configure + call. + * Don't require (fake)root for debian/rules clean. + + -- Julien Cristau Sun, 15 Apr 2012 20:46:06 +0200 + +libxext (2:1.3.0-3) unstable; urgency=low + + * Team upload. + * Don't put debug symbols for the udeb in libxdmcp6-dbg. + * Add build-indep and build-arch debian/rules targets. + + -- Julien Cristau Sun, 12 Jun 2011 00:10:43 +0200 + +libxext (2:1.3.0-2) unstable; urgency=low + + * Team upload. + + [ Steve Langasek ] + * Build for multiarch. + + [ Julien Cristau ] + * Bump Standards-Version to 3.9.2. + + -- Julien Cristau Sat, 11 Jun 2011 15:47:31 +0200 + +libxext (2:1.3.0-1) unstable; urgency=low + + * New upstream release. + * Update debian/copyright from upstream COPYING. + * Bump x11proto-xext-dev build-dep. + * Bump xorg-sgml-doctools build-dep, add xsltproc. + * Bump xutils-dev build-dep. + * Use xorg-sgml-doctool's copy of xorg.css. + * Don't install *.db yet, keep that for later. + * Update symbols file for new *Fence symbols. + * Bump shlibs accordingly. + * Wrap Depends. + * Get rid of the Replaces on x11proto-xext-dev, that was long ago. + + -- Cyril Brulebois Sun, 08 May 2011 21:15:49 +0200 + +libxext (2:1.2.0-2) unstable; urgency=low + + * Remove Brice Goglin and David Nusinow from Uploaders. Thanks for your + work! + * Bump Standards-Version to 3.9.1 (no changes). + * Upload to unstable. + + -- Julien Cristau Mon, 07 Feb 2011 22:19:09 +0100 + +libxext (2:1.2.0-1) experimental; urgency=low + + * New upstream release: + - include/X11/extensions/lbx{buf,bufstr,image}.h disappeared, + functions are found in liblbxutil. + * Update debian/copyright from upstream COPYING. + * Bump xutils-dev build-dep for new macros. + * Pass --with-xmlto and --without-fop to configure. + * Add xmlto, xorg-sgml-doctools, and w3m build-dep. + * Switch dh_install from --list-missing to --fail-missing for added + safety. + * Get rid of *.xml files before running dh_install. + * Exclude libXext.la in dh_install call. + * Ship *.html, *.txt, *.css in libxext-dev. + + -- Cyril Brulebois Fri, 14 Jan 2011 05:39:31 +0100 + +libxext (2:1.1.2-1) unstable; urgency=low + + * New upstream release. + * Update debian/copyright from upstream COPYING. + * Bump xutils-dev build-dep for xorg-macros 1.4. + * Drop patch included upstream, disable patch system. + * Bump Standards-Version to 3.9.0. + + -- Julien Cristau Sun, 11 Jul 2010 14:15:51 +0100 + +libxext (2:1.1.1-3) unstable; urgency=low + + [ Julien Cristau ] + * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no + good reason. Thanks, Colin Watson! + + [ Cyril Brulebois ] + * Add udeb needed for the graphical installer: libxext6-udeb. + * Bump the B-D on libx11-dev to ensure libxext6-udeb gets a dependency + on libx11-6-udeb. + * Bump Standards-Version from 3.8.3 to 3.8.4 (no changes needed). + * Add myself to Uploaders. + + -- Cyril Brulebois Thu, 11 Mar 2010 03:54:58 +0100 + +libxext (2:1.1.1-2) unstable; urgency=low + + * Upload to unstable. + + -- Julien Cristau Wed, 06 Jan 2010 13:03:11 +0000 + +libxext (2:1.1.1-1) experimental; urgency=low + + [ Timo Aaltonen ] + * New upstream release (closes: #555999). + * Bump the build-dep on xutils-dev (>= 1:7.5~1). + + [ Julien Cristau ] + * Add a symbols file for libxext6. + * Don't export xgeExtRegister. + + -- Julien Cristau Sat, 28 Nov 2009 15:46:39 +0100 + +libxext (2:1.0.99.4-1) experimental; urgency=low + + [ Julien Cristau ] + * Drop the -1 debian revisions from build-deps. + * Drop the XS- prefix from Vcs-* control fields. + * libxext6{,-dbg} don't need to depend on x11-common. + * Use ${binary:Version} instead of the deprecated ${Source-Version}. + * Run autoreconf at build time. + * Parse space-separated DEB_BUILD_OPTIONS, handle parallel=N. + * Drop Pre-Depends on x11-common. This was needed for upgrades from sarge. + * Bump Standards-Version to 3.8.3 + * New upstream release. + * Bump build-dependencies following configure.ac, and drop libxau-dev + (unneeded). + * Update libxext-dev.install to install headers. + * libxext-dev Depends on new x11proto-xext-dev, and Replaces old one. + + [ Brice Goglin ] + * Add a link to www.X.org and a reference to the upstream module + in the long description. + * Add upstream URL to debian/copyright. + * Use updated xsfbs, closes: #538585. + * Move -dbg package to section debug. + + [ Timo Aaltonen ] + * Add README.source from xsfbs. + + -- Julien Cristau Tue, 29 Sep 2009 11:52:49 +0200 + +libxext (2:1.0.4-1) unstable; urgency=low + + [ Timo Aaltonen ] + * Bump the epoch so that this can be synced to Ubuntu in the future. + + [ Brice Goglin ] + * New upstream release. + * Update debian/copyright to the new upstream COPYING. + * Add myself to Uploaders, remove Fabio and Branden with their permission. + + -- Brice Goglin Sun, 02 Mar 2008 16:25:56 +0100 + +libxext (1:1.0.3-2) unstable; urgency=low + + * Put binary packages in the correct sections. + * Add XS-Vcs-Browser. + * Upload to unstable. + + -- Julien Cristau Wed, 11 Apr 2007 14:45:45 +0200 + +libxext (1:1.0.3-1) experimental; urgency=low + + * New upstream release. + + includes XShm(3) manpage (closes: #128929). + + drop manpage sections patch, applied upstream. + * Fix typo in package description, thanks to Rakesh 'arky' Ambati + (closes: #398487). + * Drop obsolete CVS info from the descriptions, and add XS-Vcs-Git. + * Install the upstream ChangeLog + * Use dh_installman to replace ".so" links with symlinks. + + -- Julien Cristau Fri, 9 Feb 2007 12:14:36 +0100 + +libxext (1:1.0.1-2) unstable; urgency=low + + [ Andres Salomon ] + * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build; + idempotency fix. + + [ Drew Parsons ] + * dbg package has priority extra. + + [ David Nusinow ] + * Make a new manpage section patch to dynamically generate the manpage + sections using the libmandir variable that other manpages in the package + use + * Autoreconf for manpage sections + + -- David Nusinow Sat, 26 Aug 2006 18:16:06 +0000 + +libxext (1:1.0.1-1) experimental; urgency=low + + * New upstream release + * Run dh_install with --list-missing + * Bump debhelper compat to 5 + * Update manpage location patch to be a lot simpler + * Don't try to install headers, as they aren't included + * Remove extra dependency on x11-common in libxext-dev + * Version libxext-dev's pre-dep on x11-common to be >= 1:7.0.0 to match the + rest of Debian and shut up lintian + * Re-wrap description of libxext-dev so that it's not too long on any one + line + * Update standards version to 3.7.2.0 + + -- David Nusinow Mon, 3 Jul 2006 15:41:05 -0400 + +libxext (1:1.0.0-4) unstable; urgency=low + + * Reorder makeshlib command in rules file so that ldconfig is run + properly. Thanks Drew Parsons and Steve Langasek. + * Add quilt to build-depends + + -- David Nusinow Tue, 18 Apr 2006 23:40:53 -0400 + +libxext (1:1.0.0-3) unstable; urgency=low + + * Upload to unstable + + -- David Nusinow Thu, 23 Mar 2006 22:44:36 -0500 + +libxext (1:1.0.0-2) experimental; urgency=low + + * Backport manpage location fix from upstream + + -- David Nusinow Thu, 9 Mar 2006 23:16:00 -0500 + +libxext (1:1.0.0-1) experimental; urgency=low + + * First upload to Debian + + -- David Nusinow Thu, 29 Dec 2005 20:51:38 -0500 + +libxext (1:6.4.3-3) breezy; urgency=low + + * Bump Build-Depends on x11proto-core-dev and libx11-dev to today's CVS + versions, to stop _XOPEN_SOURCE leakage. + + -- Daniel Stone Fri, 22 Jul 2005 23:33:51 +1000 + +libxext (1:6.4.3-2) breezy; urgency=low + + * Add missing build-dep on libxau-dev. + + -- Adam Conrad Fri, 17 Jun 2005 08:42:42 +0000 + +libxext (1:6.4.3-1) breezy; urgency=low + + * First libxext release. + + -- Daniel Stone Mon, 16 May 2005 22:10:17 +1000 --- libxext-1.3.3.orig/debian/compat +++ libxext-1.3.3/debian/compat @@ -0,0 +1 @@ +7 --- libxext-1.3.3.orig/debian/control +++ libxext-1.3.3/debian/control @@ -0,0 +1,211 @@ +Source: libxext +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Build-Depends: +# dpkg-buildflags --export=configure + dpkg-dev (>= 1.16.1), +# misc:Pre-Depends + debhelper (>= 8.1.3), + libx11-dev (>= 2:1.6), + x11proto-core-dev (>= 7.0.13), + x11proto-xext-dev (>= 7.1.99), + pkg-config, + automake, + libtool, + xutils-dev (>= 1:7.6+2), +# specs + xmlto (>= 0.0.22), + xorg-sgml-doctools (>= 1:1.8), + w3m, + xsltproc, +Standards-Version: 3.9.2 +Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxext +Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxext.git + +Package: libxext6 +Section: libs +Architecture: any +Depends: + ${shlibs:Depends}, + ${misc:Depends}, +Pre-Depends: ${misc:Pre-Depends} +Multi-Arch: same +Description: X11 miscellaneous extension library + libXext provides an X Window System client interface to several extensions to + the X protocol. + . + The supported protocol extensions are: + - DOUBLE-BUFFER (DBE), the Double Buffer extension; + - DPMS, the VESA Display Power Management System extension; + - Extended-Visual-Information (EVI), an extension for gathering extra + information about the X server's visuals; + - LBX, the Low Bandwidth X extension; + - MIT-SHM, the MIT X client/server shared memory extension; + - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; + - Multi-Buffering, the multi-buffering and stereo display extension; + - SECURITY, the X security extension; + - SHAPE, the non-rectangular shaped window extension; + - SYNC, the X synchronization extension; + - TOG-CUP, the Open Group's Colormap Utilization extension; + - XC-APPGROUP, the X Consortium's Application Group extension; + - XC-MISC, the X Consortium's resource ID querying extension; + - XTEST, the X test extension (this is one of two client-side + implementations; the other is in the libXtst library, provided by the + libxtst6 package); + . + libXext also provides a small set of utility functions to aid authors of + client APIs for X protocol extensions. + . + More information about X.Org can be found at: + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXext + +Package: libxext6-udeb +XC-Package-Type: udeb +Section: debian-installer +Architecture: any +Depends: + ${shlibs:Depends}, + ${misc:Depends}, +Description: X11 miscellaneous extension library + This is a udeb, or a microdeb, for the debian-installer. + +Package: libxext6-dbg +Section: debug +Architecture: any +Priority: extra +Depends: + ${shlibs:Depends}, + ${misc:Depends}, + libxext6 (= ${binary:Version}), +Multi-Arch: same +Description: X11 miscellaneous extensions library (debug package) + libXext provides an X Window System client interface to several extensions to + the X protocol. + . + The supported protocol extensions are: + - DOUBLE-BUFFER (DBE), the Double Buffer extension; + - DPMS, the VESA Display Power Management System extension; + - Extended-Visual-Information (EVI), an extension for gathering extra + information about the X server's visuals; + - LBX, the Low Bandwidth X extension; + - MIT-SHM, the MIT X client/server shared memory extension; + - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; + - Multi-Buffering, the multi-buffering and stereo display extension; + - SECURITY, the X security extension; + - SHAPE, the non-rectangular shaped window extension; + - SYNC, the X synchronization extension; + - TOG-CUP, the Open Group's Colormap Utilization extension; + - XC-APPGROUP, the X Consortium's Application Group extension; + - XC-MISC, the X Consortium's resource ID querying extension; + - XTEST, the X test extension (this is one of two client-side + implementations; the other is in the libXtst library, provided by the + libxtst6 package); + . + libXext also provides a small set of utility functions to aid authors of + client APIs for X protocol extensions. + . + This package contains the debug versions of the library found in libxext6. + Non-developers likely have little use for this package. + . + More information about X.Org can be found at: + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXext + +Package: libxext-dev +Section: libdevel +Architecture: any +Multi-Arch: same +Depends: + ${shlibs:Depends}, + ${misc:Depends}, + libxext6 (= ${binary:Version}), + x11proto-core-dev, + x11proto-xext-dev (>= 7.0.99.2), + libx11-dev, +Suggests: + libxext-doc, +Description: X11 miscellaneous extensions library (development headers) + libXext provides an X Window System client interface to several extensions to + the X protocol. + . + The supported protocol extensions are: + - DOUBLE-BUFFER (DBE), the Double Buffer extension; + - DPMS, the VESA Display Power Management System extension; + - Extended-Visual-Information (EVI), an extension for gathering extra + information about the X server's visuals; + - LBX, the Low Bandwidth X extension; + - MIT-SHM, the MIT X client/server shared memory extension; + - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; + - Multi-Buffering, the multi-buffering and stereo display extension; + - SECURITY, the X security extension; + - SHAPE, the non-rectangular shaped window extension; + - SYNC, the X synchronization extension; + - TOG-CUP, the Open Group's Colormap Utilization extension; + - XC-APPGROUP, the X Consortium's Application Group extension; + - XC-MISC, the X Consortium's resource ID querying extension; + - XTEST, the X test extension (this is one of two client-side + implementations; the other is in the libXtst library, provided by the + libxtst6 package); + . + libXext also provides a small set of utility functions to aid authors of + client APIs for X protocol extensions. + . + This package contains the development headers for the library found in + libxext6. Non-developers likely have little use for this package. + . + More information about X.Org can be found at: + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXext + +Package: libxext-doc +Section: doc +Architecture: all +Multi-Arch: foreign +Depends: + ${misc:Depends}, +Breaks: + libxext-dev (<< 2:1.3.1-2), +Replaces: + libxext-dev (<< 2:1.3.1-2), +Description: X11 miscellaneous extensions library (documentation) + libXext provides an X Window System client interface to several extensions to + the X protocol. + . + The supported protocol extensions are: + - DOUBLE-BUFFER (DBE), the Double Buffer extension; + - DPMS, the VESA Display Power Management System extension; + - Extended-Visual-Information (EVI), an extension for gathering extra + information about the X server's visuals; + - LBX, the Low Bandwidth X extension; + - MIT-SHM, the MIT X client/server shared memory extension; + - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; + - Multi-Buffering, the multi-buffering and stereo display extension; + - SECURITY, the X security extension; + - SHAPE, the non-rectangular shaped window extension; + - SYNC, the X synchronization extension; + - TOG-CUP, the Open Group's Colormap Utilization extension; + - XC-APPGROUP, the X Consortium's Application Group extension; + - XC-MISC, the X Consortium's resource ID querying extension; + - XTEST, the X test extension (this is one of two client-side + implementations; the other is in the libXtst library, provided by the + libxtst6 package); + . + libXext also provides a small set of utility functions to aid authors of + client APIs for X protocol extensions. + . + This package contains the documentation for the included protocol extension + libraries. Non-developers likely have little use for this package. + . + More information about X.Org can be found at: + + . + This module can be found at + git://anongit.freedesktop.org/git/xorg/lib/libXext --- libxext-1.3.3.orig/debian/copyright +++ libxext-1.3.3/debian/copyright @@ -0,0 +1,199 @@ +This package was downloaded from +http://xorg.freedesktop.org/releases/individual/lib/ + +Copyright 1986, 1987, 1988, 1989, 1994, 1998 The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation. + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from The Open Group. + +Copyright (c) 1996 Digital Equipment Corporation, Maynard, Massachusetts. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software. + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +DIGITAL EQUIPMENT CORPORATION BE LIABLE FOR ANY CLAIM, DAMAGES, INCLUDING, +BUT NOT LIMITED TO CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR OTHER LIABILITY, +WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR +IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of Digital Equipment Corporation +shall not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from Digital +Equipment Corporation. + +Copyright (c) 1997 by Silicon Graphics Computer Systems, Inc. +Permission to use, copy, modify, and distribute this +software and its documentation for any purpose and without +fee is hereby granted, provided that the above copyright +notice appear in all copies and that both that copyright +notice and this permission notice appear in supporting +documentation, and that the name of Silicon Graphics not be +used in advertising or publicity pertaining to distribution +of the software without specific prior written permission. +Silicon Graphics makes no representation about the suitability +of this software for any purpose. It is provided "as is" +without any express or implied warranty. +SILICON GRAPHICS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS +SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY +AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SILICON +GRAPHICS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL +DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE +OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH +THE USE OR PERFORMANCE OF THIS SOFTWARE. + +Copyright 1992 Network Computing Devices + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of NCD. not be used in advertising or +publicity pertaining to distribution of the software without specific, +written prior permission. NCD. makes no representations about the +suitability of this software for any purpose. It is provided "as is" +without express or implied warranty. + +NCD. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL NCD. +BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + +Copyright 1991,1993 by Digital Equipment Corporation, Maynard, Massachusetts, +and Olivetti Research Limited, Cambridge, England. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the names of Digital or Olivetti +not be used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL AND OLIVETTI DISCLAIM ALL WARRANTIES WITH REGARD TO THIS +SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS, IN NO EVENT SHALL THEY BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF +USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR +OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +Copyright 1986, 1987, 1988 by Hewlett-Packard Corporation + +Permission to use, copy, modify, and distribute this +software and its documentation for any purpose and without +fee is hereby granted, provided that the above copyright +notice appear in all copies and that both that copyright +notice and this permission notice appear in supporting +documentation, and that the name of Hewlett-Packard not be used in +advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +Hewlett-Packard makes no representations about the +suitability of this software for any purpose. It is provided +"as is" without express or implied warranty. + +This software is not subject to any license of the American +Telephone and Telegraph Company or of the Regents of the +University of California. + +Copyright (c) 1994, 1995 Hewlett-Packard Company + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be included +in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL HEWLETT-PACKARD COMPANY BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR +THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the Hewlett-Packard +Company shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the Hewlett-Packard Company. + +Copyright Digital Equipment Corporation, 1996 + +Permission to use, copy, modify, distribute, and sell this +documentation for any purpose is hereby granted without fee, +provided that the above copyright notice and this permission +notice appear in all copies. Digital Equipment Corporation +makes no representations about the suitability for any purpose +of the information in this document. This documentation is +provided ``as is'' without express or implied warranty. + +Copyright (c) 1999, 2005, 2006, Oracle and/or its affiliates. All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. + +Copyright (c) 1989 X Consortium, Inc. and Digital Equipment Corporation. +Copyright (c) 1992 X Consortium, Inc. and Intergraph Corporation. +Copyright (c) 1993 X Consortium, Inc. and Silicon Graphics, Inc. +Copyright (c) 1994, 1995 X Consortium, Inc. and Hewlett-Packard Company. + +Permission to use, copy, modify, and distribute this documentation for +any purpose and without fee is hereby granted, provided that the above +copyright notice and this permission notice appear in all copies. +Digital Equipment Corporation, Intergraph Corporation, Silicon +Graphics, Hewlett-Packard, and the X Consortium make no +representations about the suitability for any purpose of the +information in this document. This documentation is provided ``as is'' +without express or implied warranty. --- libxext-1.3.3.orig/debian/libxext-dev.install +++ libxext-1.3.3/debian/libxext-dev.install @@ -0,0 +1,5 @@ +usr/share/man/man3/* +usr/lib/*/libXext.a +usr/lib/*/libXext.so +usr/lib/*/pkgconfig/xext.pc +usr/include/X11/extensions/ --- libxext-1.3.3.orig/debian/libxext-doc.install +++ libxext-1.3.3/debian/libxext-doc.install @@ -0,0 +1 @@ +usr/share/doc/libxext-dev --- libxext-1.3.3.orig/debian/libxext6-udeb.install +++ libxext-1.3.3/debian/libxext6-udeb.install @@ -0,0 +1 @@ +usr/lib/*/libXext.so.6* usr/lib --- libxext-1.3.3.orig/debian/libxext6.install +++ libxext-1.3.3/debian/libxext6.install @@ -0,0 +1 @@ +usr/lib/*/libXext.so.6* --- libxext-1.3.3.orig/debian/libxext6.symbols +++ libxext-1.3.3/debian/libxext6.symbols @@ -0,0 +1,136 @@ +libXext.so.6 libxext6 #MINVER# + DPMSCapable@Base 0 + DPMSDisable@Base 0 + DPMSEnable@Base 0 + DPMSForceLevel@Base 0 + DPMSGetTimeouts@Base 0 + DPMSGetVersion@Base 0 + DPMSInfo@Base 0 + DPMSQueryExtension@Base 0 + DPMSSetTimeouts@Base 0 + XGEQueryExtension@Base 2:1.1 + XGEQueryVersion@Base 2:1.1 + XLbxGetEventBase@Base 0 + XLbxQueryExtension@Base 0 + XLbxQueryVersion@Base 0 + XMITMiscGetBugMode@Base 0 + XMITMiscQueryExtension@Base 0 + XMITMiscSetBugMode@Base 0 + XMissingExtension@Base 0 + XSecurityAllocXauth@Base 0 + XSecurityFreeXauth@Base 0 + XSecurityGenerateAuthorization@Base 0 + XSecurityQueryExtension@Base 0 + XSecurityRevokeAuthorization@Base 0 + XSetExtensionErrorHandler@Base 0 + XShapeCombineMask@Base 0 + XShapeCombineRectangles@Base 0 + XShapeCombineRegion@Base 0 + XShapeCombineShape@Base 0 + XShapeGetRectangles@Base 0 + XShapeInputSelected@Base 0 + XShapeOffsetShape@Base 0 + XShapeQueryExtension@Base 0 + XShapeQueryExtents@Base 0 + XShapeQueryVersion@Base 0 + XShapeSelectInput@Base 0 + XShmAttach@Base 0 + XShmCreateImage@Base 0 + XShmCreatePixmap@Base 0 + XShmDetach@Base 0 + XShmGetEventBase@Base 0 + XShmGetImage@Base 0 + XShmPixmapFormat@Base 0 + XShmPutImage@Base 0 + XShmQueryExtension@Base 0 + XShmQueryVersion@Base 0 + XSyncAwait@Base 0 + XSyncAwaitFence@Base 2:1.3.0 + XSyncChangeAlarm@Base 0 + XSyncChangeCounter@Base 0 + XSyncCreateAlarm@Base 0 + XSyncCreateCounter@Base 0 + XSyncCreateFence@Base 2:1.3.0 + XSyncDestroyAlarm@Base 0 + XSyncDestroyCounter@Base 0 + XSyncDestroyFence@Base 2:1.3.0 + XSyncFreeSystemCounterList@Base 0 + XSyncGetPriority@Base 0 + XSyncInitialize@Base 0 + XSyncIntToValue@Base 0 + XSyncIntsToValue@Base 0 + XSyncListSystemCounters@Base 0 + XSyncMaxValue@Base 0 + XSyncMinValue@Base 0 + XSyncQueryAlarm@Base 0 + XSyncQueryCounter@Base 0 + XSyncQueryExtension@Base 0 + XSyncQueryFence@Base 2:1.3.0 + XSyncResetFence@Base 2:1.3.0 + XSyncSetCounter@Base 0 + XSyncSetPriority@Base 0 + XSyncTriggerFence@Base 2:1.3.0 + XSyncValueAdd@Base 0 + XSyncValueEqual@Base 0 + XSyncValueGreaterOrEqual@Base 0 + XSyncValueGreaterThan@Base 0 + XSyncValueHigh32@Base 0 + XSyncValueIsNegative@Base 0 + XSyncValueIsPositive@Base 0 + XSyncValueIsZero@Base 0 + XSyncValueLessOrEqual@Base 0 + XSyncValueLessThan@Base 0 + XSyncValueLow32@Base 0 + XSyncValueSubtract@Base 0 + XTestFakeAckType@Base 0 + XTestFakeInput@Base 0 + XTestFlush@Base 0 + XTestGetInput@Base 0 + XTestInputActionType@Base 0 + XTestMovePointer@Base 0 + XTestPressButton@Base 0 + XTestPressKey@Base 0 + XTestQueryInputSize@Base 0 + XTestReset@Base 0 + XTestStopInput@Base 0 + XagCreateAssociation@Base 0 + XagCreateEmbeddedApplicationGroup@Base 0 + XagCreateNonembeddedApplicationGroup@Base 0 + XagDestroyApplicationGroup@Base 0 + XagDestroyAssociation@Base 0 + XagGetApplicationGroupAttributes@Base 0 + XagQueryApplicationGroup@Base 0 + XagQueryVersion@Base 0 + XcupGetReservedColormapEntries@Base 0 + XcupQueryVersion@Base 0 + XcupStoreColors@Base 0 + XdbeAllocateBackBufferName@Base 0 + XdbeBeginIdiom@Base 0 + XdbeDeallocateBackBufferName@Base 0 + XdbeEndIdiom@Base 0 + XdbeFreeVisualInfo@Base 0 + XdbeGetBackBufferAttributes@Base 0 + XdbeGetVisualInfo@Base 0 + XdbeQueryExtension@Base 0 + XdbeSwapBuffers@Base 0 + XeviGetVisualInfo@Base 0 + XeviQueryExtension@Base 0 + XeviQueryVersion@Base 0 + XextAddDisplay@Base 0 + XextCreateExtension@Base 0 + XextDestroyExtension@Base 0 + XextFindDisplay@Base 0 + XextRemoveDisplay@Base 0 + XmbufChangeBufferAttributes@Base 0 + XmbufChangeWindowAttributes@Base 0 + XmbufClearBufferArea@Base 0 + XmbufCreateBuffers@Base 0 + XmbufCreateStereoWindow@Base 0 + XmbufDestroyBuffers@Base 0 + XmbufDisplayBuffers@Base 0 + XmbufGetBufferAttributes@Base 0 + XmbufGetScreenInfo@Base 0 + XmbufGetVersion@Base 0 + XmbufGetWindowAttributes@Base 0 + XmbufQueryExtension@Base 0 + _XExtensionErrorFunction@Base 0 --- libxext-1.3.3.orig/debian/rules +++ libxext-1.3.3/debian/rules @@ -0,0 +1,117 @@ +#!/usr/bin/make -f +# debian/rules for the Debian libxext package. +# Copyright © 2004 Scott James Remnant +# Copyright © 2005 Daniel Stone +# Copyright © 2005 David Nusinow + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# set this to the name of the main shlib's binary package +PACKAGE = libxext6 + +include debian/xsfbs/xsfbs.mk + +ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) + MAKEFLAGS += -j$(NUMJOBS) +endif + +DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH) +DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + confflags += --build=$(DEB_HOST_GNU_TYPE) +else + confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) +endif +confflags += $(shell DEB_CFLAGS_MAINT_APPEND=-Wall dpkg-buildflags --export=configure) + + +build: build-indep +build-indep: docflags = --enable-specs --with-xmlto --without-fop +build-indep: build-stamp +build-arch: docflags = --disable-specs +build-arch: build-stamp +.PHONY: build build-indep build-arch + +build-stamp: + dh_testdir + autoreconf -vfi + mkdir -p build + cd build && \ + ../configure --prefix=/usr --mandir=\$${prefix}/share/man \ + --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ + --docdir=\$${datadir}/doc/libxext-dev \ + --infodir=\$${prefix}/share/info \ + --disable-silent-rules \ + $(docflags) \ + $(confflags) + cd build && $(MAKE) + >$@ + +clean: xsfclean + dh_testdir + rm -f build-stamp + rm -f config.cache config.log config.status + rm -f */config.cache */config.log */config.status + rm -f conftest* */conftest* + rm -rf autom4te.cache */autom4te.cache + rm -rf build + rm -f INSTALL aclocal.m4 config.guess config.h.in config.sub configure + rm -f depcomp install-sh ltmain.sh missing mkinstalldirs + find -name Makefile.in -delete + dh_clean + +install: build-stamp + dh_testdir + dh_testroot + dh_prep + dh_installdirs + + cd build && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install + # Kill *.xml, we don't need them: + -find debian/tmp/usr/share/doc/libxext-dev -name '*.xml' -delete + -find debian/tmp/usr/share/doc/libxext-dev -name '*.db' -delete + +# Build architecture-dependent files here. +binary-arch: build-arch install + dh_testdir + dh_testroot + + dh_installdocs -s + dh_install -s --fail-missing -XlibXext.la + dh_installchangelogs -s + dh_link -s + dh_installman -s + dh_strip -p$(PACKAGE) --dbg-package=$(PACKAGE)-dbg + dh_strip -s -N$(PACKAGE) + dh_compress -s + dh_fixperms -s + dh_makeshlibs -s -V"$(PACKAGE) (>= 2:1.3.0)" --add-udeb=$(PACKAGE)-udeb -- -c4 + dh_shlibdeps -s + dh_installdeb -s + dh_gencontrol -s + dh_md5sums -s + dh_builddeb -s + +# Build architecture-independent files here. +binary-indep: build-indep install + dh_testdir + dh_testroot + + dh_installdocs -i + dh_install -i --fail-missing -XlibXext.la + dh_installchangelogs -i + dh_link -i + dh_installman -i + dh_compress -i + dh_fixperms -i + dh_installdeb -i + dh_gencontrol -i + dh_md5sums -i + dh_builddeb -i + +binary: binary-indep binary-arch +.PHONY: clean binary-indep binary-arch binary install --- libxext-1.3.3.orig/debian/upstream/signing-key.asc +++ libxext-1.3.3/debian/upstream/signing-key.asc @@ -0,0 +1,24 @@ +-----BEGIN PGP PUBLIC KEY BLOCK----- +Version: GnuPG v1 + +mQGiBD8b0wYRBACph9kRJmP+4+JGsCgFlFoy4vFO0DCG+jmkQN0n1wdInt/N/UtA +sZToO72AUmfmYizA+IEbzBrx0UnUo3w3BDmHxUWf/akZiPUz9AA/YFY4xC3MY2OK +VN2Jz6YSce4zJ5jd2ZRobHm4HuIf/8yqSCcsv7FNfrLaTNIFRs5gYYsqZwCgwmkp +RSLRc8WAnHrTWNQDaEFM2rUEAKTjrTjMN8+KGd0BxNX7HiTSqQP++nXNwAYs1oWB +Yt82YHj9SvRCqCzD1pzJQivYnlNoWDza1VeMnfdAvkdia8z4lYbO/RunXZJvra3Z +VDm+izq+uwUAyvFuEYnNz09VSqwXKT6+XW0Xtz2vHq52r6DS6mK8cGJHZ5OhrRjq +UEYxA/9STh+QfA98xtNoRcf52E/46r7IpCj440oRVc9lMfxQZrLGQNqp7sPdIhGQ +CCo2NUII5hkhdAG71kpbfSXU4Sh32p1cU1KYCAkDFfb49bKuAs+Pff8v6FGZxTdd +AinPZr4BbsYJatk818aTCnu0+s7L8jL5GPfeyuyEMKwzVBx2mLQpUGV0ZXIgSHV0 +dGVyZXIgKFdoby1UKSA8b2ZmaWNlQHdoby10Lm5ldD6IWQQTEQIAGQUCPxvTBgQL +BwMCAxUCAwMWAgECHgECF4AACgkQ4jt+cLRn8L/0RACfWo3KTMUg+uPRqA6RXxk0 +4CWjXaMAoJeIxOpZLB3RBltPnSi7PyVQIkHFuQENBD8b0wgQBACTnqOYOWYVR8O1 +D73J6nbdAeZCbXrUkyXIuyqBOdKmX/0QJmSs7Wfsa+hPfDhj6ai0Gs2C8Qg/0Pzk +86b4p9DLkf0M6RaYjUtCJBpS59xrsV6nz6xZzQa4RRdf1YJmw2tia1MMXzxbwQU2 +bKpYEm8NsGaBURMGd02EvsMN2wI2uwADBQP/e9MjVr/85XDzAlUBN8HwYW5szTyP +8ZVcQOqOmNebkTWGLvkPrBdXmxpzrWjxPolO1WcWQjUL0bN/rbdqefT65iVHJHJZ +/cpTtgGlCPhL5JTA50ltd0I13CABYWLFmswonXES/6tcglf4rr3Nri2sOrY5HggP +ipEzOo5vdKOow/qIRgQYEQIABgUCPxvTCAAKCRDiO35wtGfwv68jAKCDvL2gkrg1 +4NfV7rNc057K1nL2GgCeKApWRgGVzaOkAp0P5tQulaDD6zM= +=7uBX +-----END PGP PUBLIC KEY BLOCK----- --- libxext-1.3.3.orig/debian/watch +++ libxext-1.3.3/debian/watch @@ -0,0 +1,4 @@ +#git=git://anongit.freedesktop.org/xorg/lib/libXext +version=3 +opts=pgpsigurlmangle=s/$/.sig/ \ +http://xorg.freedesktop.org/releases/individual/lib/ libXext-(.*)\.tar\.gz --- libxext-1.3.3.orig/debian/xsfbs/repack.sh +++ libxext-1.3.3/debian/xsfbs/repack.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +set -e + +if ! [ -d debian/prune ]; then + exit 0 +fi + +if [ "x$1" != x--upstream-version ]; then + exit 1 +fi + +version="$2" +filename="$3" + +if [ -z "$version" ] || ! [ -f "$filename" ]; then + exit 1 +fi + +dir="$(pwd)" +tempdir="$(mktemp -d)" + +cd "$tempdir" +tar xf "$dir/$filename" +cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done + +tar czf "$dir/$filename" * +cd "$dir" +rm -rf "$tempdir" +echo "Done pruning upstream tarball" + +exit 0 --- libxext-1.3.3.orig/debian/xsfbs/xsfbs.mk +++ libxext-1.3.3/debian/xsfbs/xsfbs.mk @@ -0,0 +1,285 @@ +#!/usr/bin/make -f + +# Debian X Strike Force Build System (XSFBS): Make portion + +# Copyright 1996 Stephen Early +# Copyright 1997 Mark Eichin +# Copyright 1998-2005, 2007 Branden Robinson +# Copyright 2005 David Nusinow +# +# Licensed under the GNU General Public License, version 2. See the file +# /usr/share/common-licenses/GPL or . + +# Originally by Stephen Early +# Modified by Mark W. Eichin +# Modified by Adam Heath +# Modified by Branden Robinson +# Modified by Fabio Massimo Di Nitto +# Modified by David Nusinow +# Acknowledgements to Manoj Srivastava. + +# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. +export DH_OPTIONS + +# force quilt to not use ~/.quiltrc and to use debian/patches +QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null + +# Set up parameters for the upstream build environment. + +# Determine (source) package name from Debian changelog. +SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Source:' | awk '{print $$2}') + +# Determine package version from Debian changelog. +SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ + | grep '^Version:' | awk '{print $$2}') + +# Determine upstream version number. +UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') + +# Determine the source version without the epoch for make-orig-tar-gz +NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') + +# Figure out who's building this package. +BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) + +# Find out if this is an official build; an official build has nothing but +# digits, dots, and/or the codename of a release in the Debian part of the +# version number. Anything else indicates an unofficial build. +OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) + +# Set up parameters for the Debian build environment. + +# Determine our architecture. +BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) +# Work around some old-time dpkg braindamage. +BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) +# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. +ifdef DEB_HOST_ARCH + ARCH:=$(DEB_HOST_ARCH) +else + # dpkg-cross sets the ARCH environment variable; if set, use it. + ifdef ARCH + ARCH:=$(ARCH) + else + ARCH:=$(BUILD_ARCH) + endif +endif + +# $(STAMP_DIR) houses stamp files for complex targets. +STAMP_DIR:=stampdir + +# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place +# their files. +DEBTREEDIR:=$(CURDIR)/debian/tmp + +# All "important" targets have four lines: +# 1) A target name that is invoked by a package-building tool or the user. +# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. +# 2) A line delcaring 1) as a phony target (".PHONY:"). +# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may +# depend on other targets. +# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the +# "$(STAMP_DIR)/" prefix is omitted. +# +# This indirection is needed so that the "stamp" files that signify when a rule +# is done can be located in a separate "stampdir". Recall that make has no way +# to know when a goal has been met for a phony target (like "build" or +# "install"). +# +# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" +# so that the target will not be run again. Removing the file will make Make +# run the target over. + +# All phony targets should be declared as dependencies of .PHONY, even if they +# do not have "($STAMP_DIR)/"-prefixed counterparts. + +# Define a harmless default rule to keep things from going nuts by accident. +.PHONY: default +default: + +# Set up the $(STAMP_DIR) directory. +.PHONY: stampdir +stampdir_targets+=stampdir +stampdir: $(STAMP_DIR)/stampdir +$(STAMP_DIR)/stampdir: + mkdir $(STAMP_DIR) + >$@ + +# Set up the package build directory as quilt expects to find it. +.PHONY: prepare +stampdir_targets+=prepare +prepare: $(STAMP_DIR)/prepare +$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts + >$@ + +.PHONY: logdir +stampdir_targets+=logdir +logdir: $(STAMP_DIR)/logdir +$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir + mkdir -p $(STAMP_DIR)/log + >$@ + +# Apply all patches to the upstream source. +.PHONY: patch +stampdir_targets+=patch +patch: $(STAMP_DIR)/patch +$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare + if ! [ `which quilt` ]; then \ + echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ + exit 1; \ + fi; \ + if $(QUILT) next >/dev/null 2>&1; then \ + echo -n "Applying patches..."; \ + if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ + cat $(STAMP_DIR)/log/patch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/patch; \ + echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "No patches to apply"; \ + fi; \ + >$@ + +# Revert all patches to the upstream source. +.PHONY: unpatch +unpatch: $(STAMP_DIR)/logdir + rm -f $(STAMP_DIR)/patch + @echo -n "Unapplying patches..."; \ + if $(QUILT) applied >/dev/null 2>/dev/null; then \ + if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "successful."; \ + else \ + cat $(STAMP_DIR)/log/unpatch; \ + echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ + exit 1; \ + fi; \ + else \ + echo "nothing to do."; \ + fi + +# Clean the generated maintainer scripts. +.PHONY: cleanscripts +cleanscripts: + rm -f $(STAMP_DIR)/genscripts + rm -f debian/*.config \ + debian/*.postinst \ + debian/*.postrm \ + debian/*.preinst \ + debian/*.prerm + +# Clean the package build tree. +.PHONY: xsfclean +xsfclean: cleanscripts unpatch + dh_testdir + rm -rf .pc + rm -rf $(STAMP_DIR) + dh_clean + +# Remove files from the upstream source tree that we don't need, or which have +# licensing problems. It must be run before creating the .orig.tar.gz. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: prune-upstream-tree +prune-upstream-tree: + # Ensure we're in the correct directory. + dh_testdir + grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf + +# Verify that there are no offsets or fuzz in the patches we apply. +# +# Note: This rule is for Debian package maintainers' convenience, and is not +# needed for conventional build scenarios. +.PHONY: patch-audit +patch-audit: prepare unpatch + @echo -n "Auditing patches..."; \ + >$(STAMP_DIR)/log/patch; \ + FUZZY=; \ + while [ -n "$$($(QUILT) next)" ]; do \ + RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ + case "$$RESULT" in \ + succeeded) \ + echo "fuzzy patch: $$($(QUILT) top)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \ + FUZZY=yes; \ + ;; \ + FAILED) \ + echo "broken patch: $$($(QUILT) next)" \ + | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \ + exit 1; \ + ;; \ + esac; \ + done; \ + if [ -n "$$FUZZY" ]; then \ + echo "there were fuzzy patches; please fix."; \ + exit 1; \ + else \ + echo "done."; \ + fi + +# Generate the maintainer scripts. +.PHONY: genscripts +stampdir_targets+=genscripts +genscripts: $(STAMP_DIR)/genscripts +$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir + for FILE in debian/*.config.in \ + debian/*.postinst.in \ + debian/*.postrm.in \ + debian/*.preinst.in \ + debian/*.prerm.in; do \ + if [ -e "$$FILE" ]; then \ + MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ + sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ + cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ + sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ + | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ + sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ + -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ + <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ + rm $$MAINTSCRIPT.tmp; \ + fi; \ + done + # Validate syntax of generated shell scripts. + #sh debian/scripts/validate-posix-sh debian/*.config \ + # debian/*.postinst \ + # debian/*.postrm \ + # debian/*.preinst \ + # debian/*.prerm + >$@ + +# Compute dependencies for drivers +# +VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null) +INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null) + +# these two can be removed post-squeeze +VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null) +INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null) +VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video +INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input + +ifeq ($(PACKAGE),) +PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control) +endif + +.PHONY: serverabi +serverabi: install +ifeq ($(VIDEODEP),) + @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed' + @exit 1 +else + echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars + echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars + # the following is there for compatibility... + echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars + echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars + echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars +endif + +# vim:set noet ai sts=8 sw=8 tw=0: --- libxext-1.3.3.orig/debian/xsfbs/xsfbs.sh +++ libxext-1.3.3/debian/xsfbs/xsfbs.sh @@ -0,0 +1,622 @@ +# This is the X Strike Force shell library for X Window System package +# maintainer scripts. It serves to define shell functions commonly used by +# such packages, and performs some error checking necessary for proper operation +# of those functions. By itself, it does not "do" much; the maintainer scripts +# invoke the functions defined here to accomplish package installation and +# removal tasks. + +# If you are reading this within a Debian package maintainer script (e.g., +# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can +# skip past this library by scanning forward in this file to the string +# "GOBSTOPPER". + +SOURCE_VERSION=@SOURCE_VERSION@ +OFFICIAL_BUILD=@OFFICIAL_BUILD@ + +# Use special abnormal exit codes so that problems with this library are more +# easily tracked down. +SHELL_LIB_INTERNAL_ERROR=86 +SHELL_LIB_THROWN_ERROR=74 +SHELL_LIB_USAGE_ERROR=99 + +# old -> new variable names +if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then + DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" +fi +if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then + DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" +fi + +# initial sanity checks +if [ -z "$THIS_PACKAGE" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of this package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ -z "$THIS_SCRIPT" ]; then + cat >&2 < on the World Wide Web for +instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the +"doc-debian" package, or install the "reportbug" package and use the command of +the same name to file a report against version $SOURCE_VERSION of the +"$THIS_PACKAGE" package. +EOF + exit $SHELL_LIB_USAGE_ERROR +fi + +if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then + RECONFIGURE="true" +else + RECONFIGURE= +fi + +if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then + FIRSTINST="yes" +fi + +if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then + UPGRADE="yes" +fi + +trap "message;\ + message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ + message;\ + exit 1" HUP INT QUIT TERM + +reject_nondigits () { + # syntax: reject_nondigits [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters other than decimal digits and barf if any are found + while [ -n "$1" ]; do + # does the operand contain anything but digits? + if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then + # can't use die(), because it wraps message() which wraps this function + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ + "possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +reject_unlikely_path_chars () { + # syntax: reject_unlikely_path_chars [ operand ... ] + # + # scan operands (typically shell variables whose values cannot be trusted) for + # characters unlikely to be seen in a path and which the shell might + # interpret and barf if any are found + while [ -n "$1" ]; do + # does the operand contain any funny characters? + if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then + # can't use die(), because I want to avoid forward references + echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ + "encountered possibly malicious garbage \"$1\"" >&2 + exit $SHELL_LIB_THROWN_ERROR + fi + shift + done +} + +# Query the terminal to establish a default number of columns to use for +# displaying messages to the user. This is used only as a fallback in the +# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while +# the script is running, and this cannot, only being calculated once.) +DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true +if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then + DEFCOLUMNS=80 +fi + +message () { + # pretty-print messages of arbitrary length + reject_nondigits "$COLUMNS" + echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 +} + +observe () { + # syntax: observe message ... + # + # issue observational message suitable for logging someday when support for + # it exists in dpkg + if [ -n "$DEBUG_XORG_PACKAGE" ]; then + message "$THIS_PACKAGE $THIS_SCRIPT note: $*" + fi +} + +warn () { + # syntax: warn message ... + # + # issue warning message suitable for logging someday when support for + # it exists in dpkg; also send to standard error + message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" +} + +die () { + # syntax: die message ... + # + # exit script with error message + message "$THIS_PACKAGE $THIS_SCRIPT error: $*" + exit $SHELL_LIB_THROWN_ERROR +} + +internal_error () { + # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message + message "internal error: $*" + if [ -n "$OFFICIAL_BUILD" ]; then + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + fi + exit $SHELL_LIB_INTERNAL_ERROR +} + +usage_error () { + message "usage error: $*" + message "Please report a bug in the $THIS_SCRIPT script of the" \ + "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ + "Tracking System. Include all messages above that mention the" \ + "$THIS_PACKAGE package. Visit " \ + " on the World Wide Web for" \ + "instructions, read the file" \ + "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ + "package, or install the reportbug package and use the command of" \ + "the same name to file a report." + exit $SHELL_LIB_USAGE_ERROR +} + +font_update () { + # run $UPDATECMDS in $FONTDIRS + + local dir cmd shortcmd x_font_dir_prefix + + x_font_dir_prefix="/usr/share/fonts/X11" + + if [ -z "$UPDATECMDS" ]; then + usage_error "font_update() called but \$UPDATECMDS not set" + fi + if [ -z "$FONTDIRS" ]; then + usage_error "font_update() called but \$FONTDIRS not set" + fi + + reject_unlikely_path_chars "$UPDATECMDS" + reject_unlikely_path_chars "$FONTDIRS" + + for dir in $FONTDIRS; do + if [ -d "$x_font_dir_prefix/$dir" ]; then + for cmd in $UPDATECMDS; do + if which "$cmd" > /dev/null 2>&1; then + shortcmd=${cmd##*/} + observe "running $shortcmd in $dir font directory" + cmd_opts= + if [ "$shortcmd" = "update-fonts-alias" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-dir" ]; then + cmd_opts=--x11r7-layout + fi + if [ "$shortcmd" = "update-fonts-scale" ]; then + cmd_opts=--x11r7-layout + fi + $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \ + "failed; font directory data may not" \ + "be up to date" + else + warn "$cmd not found; not updating corresponding $dir font" \ + "directory data" + fi + done + else + warn "$dir is not a directory; not updating font directory data" + fi + done +} + +remove_conffile_prepare () { + # syntax: remove_conffile_prepare filename official_md5sum ... + # + # Check a conffile "filename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 2 ]; then + usage_error "remove_conffile_prepare() called with wrong number of" \ + "arguments; expected at least 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + shift + + # does the conffile even exist? + if [ -e "$conffile" ]; then + # calculate its checksum + current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//') + # compare it to each supplied checksum + while [ -n "$1" ]; do + if [ "$current_checksum" = "$1" ]; then + # we found a match; move the confffile and stop looking + observe "preparing obsolete conffile $conffile for removal" + mv "$conffile" "$conffile.$THIS_PACKAGE-tmp" + break + fi + shift + done + fi +} + +remove_conffile_lookup () { + # syntax: remove_conffile_lookup package filename + # + # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal + # if it matches the actual file's md5sum. + # + # Call this function when you would call remove_conffile_prepare but only + # want to check against dpkg's status database instead of known checksums. + + local package conffile old_md5sum + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "remove_conffile_lookup() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + package="$1" + conffile="$2" + + if ! [ -e "$conffile" ]; then + return + fi + old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \ + awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')" + if [ -n "$old_md5sum" ]; then + remove_conffile_prepare "$conffile" "$old_md5sum" + fi +} + +remove_conffile_commit () { + # syntax: remove_conffile_commit filename + # + # Complete the removal of a conffile "filename" that has become obsolete. + # + # Call this function from a postinst script after having used + # remove_conffile_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_commit() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, remove it + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "committing removal of obsolete conffile $conffile" + rm "$conffile.$THIS_PACKAGE-tmp" + fi +} + +remove_conffile_rollback () { + # syntax: remove_conffile_rollback filename + # + # Roll back the removal of a conffile "filename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" is after having used remove_conffile_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "remove_conffile_rollback() called with wrong number of" \ + "arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + # if the temporary file created by remove_conffile_prepare() exists, move it + # back + if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then + observe "rolling back removal of obsolete conffile $conffile" + mv "$conffile.$THIS_PACKAGE-tmp" "$conffile" + fi +} + +replace_conffile_with_symlink_prepare () { + # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ + # official_md5sum ... + # + # Check a conffile "oldfilename" against a list of canonical MD5 checksums. + # If the file's current MD5 checksum matches one of the "official_md5sum" + # operands provided, then prepare the conffile for removal from the system. + # We defer actual deletion until the package is configured so that we can + # roll this operation back if package installation fails. Otherwise copy it + # to newfilename and let dpkg handle it through conffiles mechanism. + # + # Call this function from a preinst script in the event $1 is "upgrade" or + # "install" and verify $2 to ensure the package is being upgraded from a + # version (or installed over a version removed-but-not-purged) prior to the + # one in which the conffile was obsoleted. + + local conffile current_checksum + + # validate arguments + if [ $# -lt 3 ]; then + usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ + " number of arguments; expected at least 3, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + shift + newconffile="$1" + shift + + remove_conffile_prepare "$_oldconffile" "$@" + # If $oldconffile still exists, then md5sums didn't match. + # Copy it to new one. + if [ -f "$oldconffile" ]; then + cp "$oldconffile" "$newconffile" + fi + +} + +replace_conffile_with_symlink_commit () { + # syntax: replace_conffile_with_symlink_commit oldfilename + # + # Complete the removal of a conffile "oldfilename" that has been + # replaced by a symlink. + # + # Call this function from a postinst script after having used + # replace_conffile_with_symlink_prepare() in the preinst. + + local conffile + + # validate arguments + if [ $# -ne 1 ]; then + usage_error "replace_conffile_with_symlink_commit() called with wrong" \ + "number of arguments; expected 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + conffile="$1" + + remove_conffile_commit "$conffile" +} + +replace_conffile_with_symlink_rollback () { + # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename + # + # Roll back the replacing of a conffile "oldfilename" with symlink to + # "newfilename". + # + # Call this function from a postrm script in the event $1 is "abort-upgrade" + # or "abort-install" and verify $2 to ensure the package failed to upgrade + # from a version (or install over a version removed-but-not-purged) prior + # to the one in which the conffile was obsoleted. + # You should have used replace_conffile_with_symlink_prepare() in the + # preinst. + + local conffile + + # validate arguments + if [ $# -ne 2 ]; then + usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ + "number of arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + oldconffile="$1" + newconffile="$2" + + remove_conffile_rollback "$_oldconffile" + if [ -f "$newconffile" ]; then + rm "$newconffile" + fi +} + +run () { + # syntax: run command [ argument ... ] + # + # Run specified command with optional arguments and report its exit status. + # Useful for commands whose exit status may be nonzero, but still acceptable, + # or commands whose failure is not fatal to us. + # + # NOTE: Do *not* use this function with db_get or db_metaget commands; in + # those cases the return value of the debconf command *must* be checked + # before the string returned by debconf is used for anything. + + local retval + + # validate arguments + if [ $# -lt 1 ]; then + usage_error "run() called with wrong number of arguments; expected at" \ + "least 1, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + "$@" || retval=$? + + if [ ${retval:-0} -ne 0 ]; then + observe "command \"$*\" exited with status $retval" + fi +} + +make_symlink_sane () { + # syntax: make_symlink_sane symlink target + # + # Ensure that the symbolic link symlink exists, and points to target. + # + # If symlink does not exist, create it and point it at target. + # + # If symlink exists but is not a symbolic link, back it up. + # + # If symlink exists, is a symbolic link, but points to the wrong location, fix + # it. + # + # If symlink exists, is a symbolic link, and already points to target, do + # nothing. + # + # This function wouldn't be needed if ln had an -I, --idempotent option. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "make_symlink_sane() called with wrong number of arguments;" \ + "expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local symlink target + + symlink="$1" + target="$2" + + if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then + observe "link from $symlink to $target already exists" + else + observe "creating symbolic link from $symlink to $target" + mkdir -p "${target%/*}" "${symlink%/*}" + ln -s -b -S ".dpkg-old" "$target" "$symlink" + fi +} + +migrate_dir_to_symlink () { + # syntax: migrate_dir_to_symlink old_location new_location + # + # Per Debian Policy section 6.5.4, "A directory will never be replaced by a + # symbolic link to a directory or vice versa; instead, the existing state + # (symlink or not) will be left alone and dpkg will follow the symlink if + # there is one." + # + # We have to do it ourselves. + # + # This function moves the contents of old_location, a directory, into + # new_location, a directory, then makes old_location a symbolic link to + # new_location. + # + # old_location need not exist, but if it does, it must be a directory (or a + # symlink to a directory). If it is not, it is backed up. If new_location + # exists already and is not a directory, it is backed up. + # + # This function should be called from a package's preinst so that other + # packages unpacked after this one --- but before this package's postinst runs + # --- are unpacked into new_location even if their payloads contain + # old_location filespecs. + + # Validate arguments. + if [ $# -ne 2 ]; then + usage_error "migrate_dir_to_symlink() called with wrong number of" + "arguments; expected 2, got $#" + exit $SHELL_LIB_USAGE_ERROR + fi + + # We could just use the positional parameters as-is, but that makes things + # harder to follow. + local new old + + old="$1" + new="$2" + + # Is old location a symlink? + if [ -L "$old" ]; then + # Does it already point to new location? + if [ "$(readlink "$old")" = "$new" ]; then + # Nothing to do; migration has already been done. + observe "migration of $old to $new already done" + return 0 + else + # Back it up. + warn "backing up symbolic link $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + fi + + # Does old location exist, but is not a directory? + if [ -e "$old" ] && ! [ -d "$old" ]; then + # Back it up. + warn "backing up non-directory $old as $old.dpkg-old" + mv -b "$old" "$old.dpkg-old" + fi + + observe "migrating $old to $new" + + # Is new location a symlink? + if [ -L "$new" ]; then + # Does it point the wrong way, i.e., back to where we're migrating from? + if [ "$(readlink "$new")" = "$old" ]; then + # Get rid of it. + observe "removing symbolic link $new which points to $old" + rm "$new" + else + # Back it up. + warn "backing up symbolic link $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + fi + + # Does new location exist, but is not a directory? + if [ -e "$new" ] && ! [ -d "$new" ]; then + warn "backing up non-directory $new as $new.dpkg-old" + mv -b "$new" "$new.dpkg-old" + fi + + # Create new directory if it does not yet exist. + if ! [ -e "$new" ]; then + observe "creating $new" + mkdir -p "$new" + fi + + # Copy files in old location to new location. Back up any filenames that + # already exist in the new location with the extension ".dpkg-old". + observe "copying files from $old to $new" + if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then + die "error(s) encountered while copying files from $old to $new" + fi + + # Remove files at old location. + observe "removing $old" + rm -r "$old" + + # Create symlink from old location to new location. + make_symlink_sane "$old" "$new" +} + +# vim:set ai et sw=2 ts=2 tw=80: + +# GOBSTOPPER: The X Strike Force shell library ends here.