diff --git a/Documentation/Makefile b/Documentation/Makefile index 94b9457..043d7da 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,3 +1,3 @@ obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ filesystems/configfs/ ia64/ networking/ \ - pcmcia/ spi/ video4linux/ vm/ watchdog/src/ + pcmcia/ spi/ vm/ watchdog/src/ diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 71c602d..ab8689b 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -502,6 +502,18 @@ more details, with real examples. gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used. Note: cc-option-align uses KBUILD_CFLAGS for $(CC) options + cc-disable-warning + cc-disable-warning checks if gcc supports a given warning and returns + the commandline switch to disable it. This special function is needed, + because gcc 4.4 and later accept any unknown -Wno-* option and only + warn about it if there is another warning in the source file. + + Example: + KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + + In the above example, -Wno-unused-but-set-variable will be added to + KBUILD_CFLAGS only if gcc really accepts it. + cc-version cc-version returns a numerical version of the $(CC) compiler version. The format is where both are two digits. So for example diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile deleted file mode 100644 index 1ed0e98..0000000 --- a/Documentation/video4linux/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - -# List of programs to build -hostprogs-y := v4lgrab - -# Tell kbuild to always build the programs -always := $(hostprogs-y) diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c deleted file mode 100644 index c8ded17..0000000 --- a/Documentation/video4linux/v4lgrab.c +++ /dev/null @@ -1,201 +0,0 @@ -/* Simple Video4Linux image grabber. */ -/* - * Video4Linux Driver Test/Example Framegrabbing Program - * - * Compile with: - * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab - * Use as: - * v4lgrab >image.ppm - * - * Copyright (C) 1998-05-03, Phil Blundell - * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c - * with minor modifications (Dave Forrest, drf5n@virginia.edu). - * - * - * For some cameras you may need to pre-load libv4l to perform - * the necessary decompression, e.g.: - * - * export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so - * ./v4lgrab >image.ppm - * - * see http://hansdegoede.livejournal.com/3636.html for details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define VIDEO_DEV "/dev/video0" - -/* Stole this from tvset.c */ - -#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b) \ -{ \ - switch (format) \ - { \ - case VIDEO_PALETTE_GREY: \ - switch (depth) \ - { \ - case 4: \ - case 6: \ - case 8: \ - (r) = (g) = (b) = (*buf++ << 8);\ - break; \ - \ - case 16: \ - (r) = (g) = (b) = \ - *((unsigned short *) buf); \ - buf += 2; \ - break; \ - } \ - break; \ - \ - \ - case VIDEO_PALETTE_RGB565: \ - { \ - unsigned short tmp = *(unsigned short *)buf; \ - (r) = tmp&0xF800; \ - (g) = (tmp<<5)&0xFC00; \ - (b) = (tmp<<11)&0xF800; \ - buf += 2; \ - } \ - break; \ - \ - case VIDEO_PALETTE_RGB555: \ - (r) = (buf[0]&0xF8)<<8; \ - (g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8; \ - (b) = ((buf[1] << 2 ) & 0xF8)<<8; \ - buf += 2; \ - break; \ - \ - case VIDEO_PALETTE_RGB24: \ - (r) = buf[0] << 8; (g) = buf[1] << 8; \ - (b) = buf[2] << 8; \ - buf += 3; \ - break; \ - \ - default: \ - fprintf(stderr, \ - "Format %d not yet supported\n", \ - format); \ - } \ -} - -static int get_brightness_adj(unsigned char *image, long size, int *brightness) { - long i, tot = 0; - for (i=0;i= 126 && (tot/(size*3)) <= 130); -} - -int main(int argc, char ** argv) -{ - int fd = open(VIDEO_DEV, O_RDONLY), f; - struct video_capability cap; - struct video_window win; - struct video_picture vpic; - - unsigned char *buffer, *src; - int bpp = 24, r = 0, g = 0, b = 0; - unsigned int i, src_depth = 16; - - if (fd < 0) { - perror(VIDEO_DEV); - exit(1); - } - - if (ioctl(fd, VIDIOCGCAP, &cap) < 0) { - perror("VIDIOGCAP"); - fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n"); - close(fd); - exit(1); - } - - if (ioctl(fd, VIDIOCGWIN, &win) < 0) { - perror("VIDIOCGWIN"); - close(fd); - exit(1); - } - - if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) { - perror("VIDIOCGPICT"); - close(fd); - exit(1); - } - - if (cap.type & VID_TYPE_MONOCHROME) { - vpic.depth=8; - vpic.palette=VIDEO_PALETTE_GREY; /* 8bit grey */ - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.depth=6; - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.depth=4; - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - fprintf(stderr, "Unable to find a supported capture format.\n"); - close(fd); - exit(1); - } - } - } - } else { - vpic.depth=24; - vpic.palette=VIDEO_PALETTE_RGB24; - - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.palette=VIDEO_PALETTE_RGB565; - vpic.depth=16; - - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - vpic.palette=VIDEO_PALETTE_RGB555; - vpic.depth=15; - - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - fprintf(stderr, "Unable to find a supported capture format.\n"); - return -1; - } - } - } - } - - buffer = malloc(win.width * win.height * bpp); - if (!buffer) { - fprintf(stderr, "Out of memory.\n"); - exit(1); - } - - do { - int newbright; - read(fd, buffer, win.width * win.height * bpp); - f = get_brightness_adj(buffer, win.width * win.height, &newbright); - if (f) { - vpic.brightness += (newbright << 8); - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - perror("VIDIOSPICT"); - break; - } - } - } while (f); - - fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height); - - src = buffer; - - for (i = 0; i < win.width * win.height; i++) { - READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b); - fputc(r>>8, stdout); - fputc(g>>8, stdout); - fputc(b>>8, stdout); - } - - close(fd); - return 0; -} diff --git a/Makefile b/Makefile index 400a175..e427499 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = .48 +EXTRAVERSION = .49-rc1 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* @@ -537,6 +537,9 @@ ifndef CONFIG_CC_STACKPROTECTOR KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) endif +# This warning generated too much noise in a regular build. +KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else @@ -565,7 +568,7 @@ CHECKFLAGS += $(NOSTDINC_FLAGS) KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) # disable pointer signed / unsigned warnings in gcc 4.0 -KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,) +KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) # disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 2bef526..204f650 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, { if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + (cmd != TIOCMIWAIT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, case TIOCMIWAIT: printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n"); return 0; - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n"); - return 0; - case TIOCSERGWILD: case TIOCSERSWILD: /* "setserial -W" is called in Debian boot */ diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 0d90390..3f202f7 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -471,6 +471,12 @@ int sysdev_resume(void) { struct sysdev_class *cls; + /* + * Called from syscore in mainline but called directly here + * since syscore does not exist in this tree. + */ + irq_pm_syscore_resume(); + WARN_ONCE(!irqs_disabled(), "Interrupts enabled while resuming system devices\n"); diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 6c32fbf..579d479 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1262,6 +1262,36 @@ static int rs_break(struct tty_struct *tty, int break_state) return 0; } +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct async_struct *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + local_irq_save(flags); + cnow = info->state->icount; + local_irq_restore(flags); + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) @@ -1331,31 +1361,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, } /* NOTREACHED */ - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - local_irq_save(flags); - cnow = info->state->icount; - local_irq_restore(flags); - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - if (copy_to_user(argp, &icount, sizeof(icount))) - return -EFAULT; - return 0; case TIOCSERGWILD: case TIOCSERSWILD: /* "setserial -W" is called in Debian boot */ @@ -1948,6 +1953,7 @@ static const struct tty_operations serial_ops = { .wait_until_sent = rs_wait_until_sent, .tiocmget = rs_tiocmget, .tiocmset = rs_tiocmset, + .get_icount = rs_get_icount, .proc_fops = &rs_proc_fops, }; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 4254457..a0369dc 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2798,29 +2798,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ - case TIOCGICOUNT: { - struct serial_icounter_struct sic = { }; - - spin_lock_irqsave(&info->card->card_lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->card->card_lock, flags); - - sic.cts = cnow.cts; - sic.dsr = cnow.dsr; - sic.rng = cnow.rng; - sic.dcd = cnow.dcd; - sic.rx = cnow.rx; - sic.tx = cnow.tx; - sic.frame = cnow.frame; - sic.overrun = cnow.overrun; - sic.parity = cnow.parity; - sic.brk = cnow.brk; - sic.buf_overrun = cnow.buf_overrun; - - if (copy_to_user(argp, &sic, sizeof(sic))) - ret_val = -EFAULT; - break; - } default: ret_val = -ENOIOCTLCMD; } @@ -2832,6 +2809,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file, return ret_val; } /* cy_ioctl */ +static int cy_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *sic) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_icount cnow; /* Used to snapshot */ + unsigned long flags; + + spin_lock_irqsave(&info->card->card_lock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + + sic->cts = cnow.cts; + sic->dsr = cnow.dsr; + sic->rng = cnow.rng; + sic->dcd = cnow.dcd; + sic->rx = cnow.rx; + sic->tx = cnow.tx; + sic->frame = cnow.frame; + sic->overrun = cnow.overrun; + sic->parity = cnow.parity; + sic->brk = cnow.brk; + sic->buf_overrun = cnow.buf_overrun; + return 0; +} + /* * This routine allows the tty driver to be notified when * device's termios settings have changed. Note that a @@ -4098,6 +4100,7 @@ static const struct tty_operations cy_ops = { .wait_until_sent = cy_wait_until_sent, .tiocmget = cy_tiocmget, .tiocmset = cy_tiocmset, + .get_icount = cy_get_icount, .proc_fops = &cyclades_proc_fops, }; diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 517271c..3bec541 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -183,6 +183,8 @@ static void ip2_hangup(PTTY); static int ip2_tiocmget(struct tty_struct *tty, struct file *file); static int ip2_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); +static int ip2_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); static void set_irq(int, int); static void ip2_interrupt_bh(struct work_struct *work); @@ -448,6 +450,7 @@ static const struct tty_operations ip2_ops = { .hangup = ip2_hangup, .tiocmget = ip2_tiocmget, .tiocmset = ip2_tiocmset, + .get_icount = ip2_get_icount, .proc_fops = &ip2_proc_fops, }; @@ -2112,7 +2115,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) i2ChanStrPtr pCh = DevTable[tty->index]; i2eBordStrPtr pB; struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; int rc = 0; unsigned long flags; void __user *argp = (void __user *)arg; @@ -2281,34 +2283,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) break; /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for RI where - * only 0->1 is counted. The controller is quite capable of counting - * both, but this done to preserve compatibility with the standard - * serial driver. - */ - case TIOCGICOUNT: - ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); - - write_lock_irqsave(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; - write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); - p_cuser = argp; - rc = put_user(cnow.cts, &p_cuser->cts); - rc = put_user(cnow.dsr, &p_cuser->dsr); - rc = put_user(cnow.rng, &p_cuser->rng); - rc = put_user(cnow.dcd, &p_cuser->dcd); - rc = put_user(cnow.rx, &p_cuser->rx); - rc = put_user(cnow.tx, &p_cuser->tx); - rc = put_user(cnow.frame, &p_cuser->frame); - rc = put_user(cnow.overrun, &p_cuser->overrun); - rc = put_user(cnow.parity, &p_cuser->parity); - rc = put_user(cnow.brk, &p_cuser->brk); - rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); - break; - - /* * The rest are not supported by this driver. By returning -ENOIOCTLCMD they * will be passed to the line discipline for it to handle. */ @@ -2332,6 +2306,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) return rc; } +static int ip2_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + i2eBordStrPtr pB; + struct async_icount cnow; /* kernel counter temp */ + unsigned long flags; + + if ( pCh == NULL ) + return -ENODEV; + + pB = pCh->pMyBord; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for RI where + * only 0->1 is counted. The controller is quite capable of counting + * both, but this done to preserve compatibility with the standard + * serial driver. + */ + + write_lock_irqsave(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; + write_unlock_irqrestore(&pB->read_fifo_spinlock, flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + /******************************************************************************/ /* Function: GetSerialInfo() */ /* Parameters: Pointer to channel structure */ diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 5e28d39..4b97406 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1736,7 +1736,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, return 0; } - if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && + if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && test_bit(TTY_IO_ERROR, &tty->flags)) return -EIO; @@ -1766,32 +1766,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, return wait_event_interruptible(info->port.delta_msr_wait, mxser_cflags_changed(info, arg, &cnow)); - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: { - struct serial_icounter_struct icnt = { 0 }; - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - - icnt.frame = cnow.frame; - icnt.brk = cnow.brk; - icnt.overrun = cnow.overrun; - icnt.buf_overrun = cnow.buf_overrun; - icnt.parity = cnow.parity; - icnt.rx = cnow.rx; - icnt.tx = cnow.tx; - icnt.cts = cnow.cts; - icnt.dsr = cnow.dsr; - icnt.rng = cnow.rng; - icnt.dcd = cnow.dcd; - - return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0; - } case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); case MOXA_SDS_RSTICOUNTER: @@ -1862,6 +1836,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, return 0; } + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + +static int mxser_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->slock, flags); + + icount->frame = cnow.frame; + icount->brk = cnow.brk; + icount->overrun = cnow.overrun; + icount->buf_overrun = cnow.buf_overrun; + icount->parity = cnow.parity; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + return 0; +} + static void mxser_stoprx(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; @@ -2358,6 +2365,7 @@ static const struct tty_operations mxser_ops = { .wait_until_sent = mxser_wait_until_sent, .tiocmget = mxser_tiocmget, .tiocmset = mxser_tiocmset, + .get_icount = mxser_get_icount, }; struct tty_port_operations mxser_port_ops = { diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index dc52f75..19b3e1d 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1783,24 +1783,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags, return ret; } -static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp) +static int ntty_tiocgicount(struct tty_struct *tty, + struct serial_icounter_struct *icount) { + struct port *port = tty->driver_data; const struct async_icount cnow = port->tty_icount; - struct serial_icounter_struct icount; - - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0; + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; } static int ntty_ioctl(struct tty_struct *tty, struct file *file, @@ -1819,9 +1819,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file, rval = wait_event_interruptible(port->tty_wait, ntty_cflags_changed(port, arg, &cprev)); break; - } case TIOCGICOUNT: - rval = ntty_ioctl_tiocgicount(port, argp); - break; + } default: DBG1("ERR: 0x%08X, %d", cmd, cmd); break; @@ -1895,6 +1893,7 @@ static const struct tty_operations tty_ops = { .chars_in_buffer = ntty_chars_in_buffer, .tiocmget = ntty_tiocmget, .tiocmset = ntty_tiocmset, + .get_icount = ntty_tiocgicount, }; /* Module initialization */ diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index a08c899..74d124b 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2252,6 +2252,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state) return 0; } +static int mgslpc_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + /* Service an IOCTL request * * Arguments: @@ -2267,11 +2293,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; - int error; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ void __user *argp = (void __user *)arg; - unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2281,7 +2303,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, return -ENODEV; if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + (cmd != TIOCMIWAIT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -2311,34 +2333,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, return wait_events(info, argp); case TIOCMIWAIT: return modem_input_wait(info,(int)arg); - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - p_cuser = argp; - PUT_USER(error,cnow.cts, &p_cuser->cts); - if (error) return error; - PUT_USER(error,cnow.dsr, &p_cuser->dsr); - if (error) return error; - PUT_USER(error,cnow.rng, &p_cuser->rng); - if (error) return error; - PUT_USER(error,cnow.dcd, &p_cuser->dcd); - if (error) return error; - PUT_USER(error,cnow.rx, &p_cuser->rx); - if (error) return error; - PUT_USER(error,cnow.tx, &p_cuser->tx); - if (error) return error; - PUT_USER(error,cnow.frame, &p_cuser->frame); - if (error) return error; - PUT_USER(error,cnow.overrun, &p_cuser->overrun); - if (error) return error; - PUT_USER(error,cnow.parity, &p_cuser->parity); - if (error) return error; - PUT_USER(error,cnow.brk, &p_cuser->brk); - if (error) return error; - PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); - if (error) return error; - return 0; default: return -ENOIOCTLCMD; } diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 4846b73..b118959 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -2920,6 +2920,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state) } /* end of mgsl_break() */ +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int msgl_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mgsl_struct * info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + /* mgsl_ioctl() Service an IOCTL request * * Arguments: @@ -2945,7 +2977,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, return -ENODEV; if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + (cmd != TIOCMIWAIT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -2958,11 +2990,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file, static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) { - int error; - struct mgsl_icount cnow; /* kernel counter temps */ void __user *argp = (void __user *)arg; - struct serial_icounter_struct __user *p_cuser; /* user space */ - unsigned long flags; switch (cmd) { case MGSL_IOCGPARAMS: @@ -2991,40 +3019,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne case TIOCMIWAIT: return modem_input_wait(info,(int)arg); - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - p_cuser = argp; - PUT_USER(error,cnow.cts, &p_cuser->cts); - if (error) return error; - PUT_USER(error,cnow.dsr, &p_cuser->dsr); - if (error) return error; - PUT_USER(error,cnow.rng, &p_cuser->rng); - if (error) return error; - PUT_USER(error,cnow.dcd, &p_cuser->dcd); - if (error) return error; - PUT_USER(error,cnow.rx, &p_cuser->rx); - if (error) return error; - PUT_USER(error,cnow.tx, &p_cuser->tx); - if (error) return error; - PUT_USER(error,cnow.frame, &p_cuser->frame); - if (error) return error; - PUT_USER(error,cnow.overrun, &p_cuser->overrun); - if (error) return error; - PUT_USER(error,cnow.parity, &p_cuser->parity); - if (error) return error; - PUT_USER(error,cnow.brk, &p_cuser->brk); - if (error) return error; - PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); - if (error) return error; - return 0; default: return -ENOIOCTLCMD; } @@ -4325,6 +4319,7 @@ static const struct tty_operations mgsl_ops = { .hangup = mgsl_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = msgl_get_icount, .proc_fops = &mgsl_proc_fops, }; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 8678f0c..c300ff6 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -1057,9 +1057,6 @@ static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - unsigned long flags; void __user *argp = (void __user *)arg; int ret; @@ -1068,7 +1065,7 @@ static int ioctl(struct tty_struct *tty, struct file *file, DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + (cmd != TIOCMIWAIT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -1121,25 +1118,6 @@ static int ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCWAITGPIO: ret = wait_gpio(info, argp); break; - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd) || - put_user(cnow.rx, &p_cuser->rx) || - put_user(cnow.tx, &p_cuser->tx) || - put_user(cnow.frame, &p_cuser->frame) || - put_user(cnow.overrun, &p_cuser->overrun) || - put_user(cnow.parity, &p_cuser->parity) || - put_user(cnow.brk, &p_cuser->brk) || - put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - ret = -EFAULT; - ret = 0; - break; default: ret = -ENOIOCTLCMD; } @@ -1147,6 +1125,33 @@ static int ioctl(struct tty_struct *tty, struct file *file, return ret; } +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct slgt_info *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + /* * support for 32 bit ioctl calls on 64 bit systems */ @@ -1236,10 +1241,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCSGPIO: case MGSL_IOCGGPIO: case MGSL_IOCWAITGPIO: - case TIOCGICOUNT: - rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg))); - break; - case MGSL_IOCSTXIDLE: case MGSL_IOCTXENABLE: case MGSL_IOCRXENABLE: @@ -3639,6 +3640,7 @@ static const struct tty_operations ops = { .hangup = hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = get_icount, .proc_fops = &synclink_gt_proc_fops, }; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 2b18adc..951b65f 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -1255,10 +1255,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = tty->driver_data; - int error; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - unsigned long flags; void __user *argp = (void __user *)arg; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1269,7 +1265,7 @@ static int do_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + (cmd != TIOCMIWAIT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -1307,40 +1303,38 @@ static int do_ioctl(struct tty_struct *tty, struct file *file, * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - p_cuser = argp; - PUT_USER(error,cnow.cts, &p_cuser->cts); - if (error) return error; - PUT_USER(error,cnow.dsr, &p_cuser->dsr); - if (error) return error; - PUT_USER(error,cnow.rng, &p_cuser->rng); - if (error) return error; - PUT_USER(error,cnow.dcd, &p_cuser->dcd); - if (error) return error; - PUT_USER(error,cnow.rx, &p_cuser->rx); - if (error) return error; - PUT_USER(error,cnow.tx, &p_cuser->tx); - if (error) return error; - PUT_USER(error,cnow.frame, &p_cuser->frame); - if (error) return error; - PUT_USER(error,cnow.overrun, &p_cuser->overrun); - if (error) return error; - PUT_USER(error,cnow.parity, &p_cuser->parity); - if (error) return error; - PUT_USER(error,cnow.brk, &p_cuser->brk); - if (error) return error; - PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); - if (error) return error; - return 0; default: return -ENOIOCTLCMD; } return 0; } +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + SLMP_INFO *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { @@ -3908,6 +3902,7 @@ static const struct tty_operations ops = { .hangup = hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = get_icount, .proc_fops = &synclinkmp_proc_fops, }; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 53ffcfc..123cedf 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -96,6 +96,7 @@ #include #include #include +#include #include #include @@ -2436,6 +2437,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int return tty->ops->tiocmset(tty, file, set, clear); } +static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) +{ + int retval = -EINVAL; + struct serial_icounter_struct icount; + memset(&icount, 0, sizeof(icount)); + if (tty->ops->get_icount) + retval = tty->ops->get_icount(tty, &icount); + if (retval != 0) + return retval; + if (copy_to_user(arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; +} + struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) { if (tty->driver->type == TTY_DRIVER_TYPE_PTY && @@ -2556,6 +2571,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCMBIC: case TIOCMBIS: return tty_tiocmset(tty, file, cmd, p); + case TIOCGICOUNT: + retval = tty_tiocgicount(tty, p); + /* For the moment allow fall through to the old method */ + if (retval != -EINVAL) + return retval; + break; case TCFLSH: switch (arg) { case TCIFLUSH: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3ada62b..27a3074 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -482,14 +482,17 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, return -EBADF; obj_priv = obj->driver_private; - /* Bounds check source. - * - * XXX: This could use review for overflow issues... - */ - if (args->offset > obj->size || args->size > obj->size || - args->offset + args->size > obj->size) { - drm_gem_object_unreference(obj); - return -EINVAL; + /* Bounds check source. */ + if (args->offset > obj->size || args->size > obj->size - args->offset) { + ret = -EINVAL; + goto err; + } + + if (!access_ok(VERIFY_WRITE, + (char __user *)(uintptr_t)args->data_ptr, + args->size)) { + ret = -EFAULT; + goto err; } if (i915_gem_object_needs_bit17_swizzle(obj)) { @@ -501,8 +504,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, file_priv); } +err: drm_gem_object_unreference(obj); - return ret; } @@ -592,8 +595,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; - if (!access_ok(VERIFY_READ, user_data, remain)) - return -EFAULT; mutex_lock(&dev->struct_mutex); @@ -955,14 +956,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, return -EBADF; obj_priv = obj->driver_private; - /* Bounds check destination. - * - * XXX: This could use review for overflow issues... - */ - if (args->offset > obj->size || args->size > obj->size || - args->offset + args->size > obj->size) { - drm_gem_object_unreference(obj); - return -EINVAL; + /* Bounds check destination. */ + if (args->offset > obj->size || args->size > obj->size - args->offset) { + ret = -EINVAL; + goto err; + } + + if (!access_ok(VERIFY_READ, + (char __user *)(uintptr_t)args->data_ptr, + args->size)) { + ret = -EFAULT; + goto err; } /* We can only do the GTT pwrite on untiled buffers, as otherwise @@ -995,8 +999,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, DRM_INFO("pwrite failed %d\n", ret); #endif +err: drm_gem_object_unreference(obj); - return ret; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index cf59d64..883215d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3038,12 +3038,16 @@ static void handle_stripe5(struct stripe_head *sh) /* check if the array has lost two devices and, if so, some requests might * need to be failed */ - if (s.failed > 1 && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &return_bi); - if (s.failed > 1 && s.syncing) { - md_done_sync(conf->mddev, STRIPE_SECTORS,0); - clear_bit(STRIPE_SYNCING, &sh->state); - s.syncing = 0; + if (s.failed > 1) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &return_bi); + if (s.syncing) { + md_done_sync(conf->mddev, STRIPE_SECTORS,0); + clear_bit(STRIPE_SYNCING, &sh->state); + s.syncing = 0; + } } /* might be able to return some write requests if the parity block @@ -3314,12 +3318,16 @@ static void handle_stripe6(struct stripe_head *sh) /* check if the array has lost >2 devices and, if so, some requests * might need to be failed */ - if (s.failed > 2 && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &return_bi); - if (s.failed > 2 && s.syncing) { - md_done_sync(conf->mddev, STRIPE_SECTORS,0); - clear_bit(STRIPE_SYNCING, &sh->state); - s.syncing = 0; + if (s.failed > 2) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &return_bi); + if (s.syncing) { + md_done_sync(conf->mddev, STRIPE_SECTORS,0); + clear_bit(STRIPE_SYNCING, &sh->state); + s.syncing = 0; + } } /* diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 5b081cb..726a1b8 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -290,6 +290,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count ops.mode = MTD_OOB_RAW; ops.datbuf = kbuf; ops.oobbuf = NULL; + ops.ooboffs = 0; ops.len = len; ret = mtd->write_oob(mtd, *ppos, &ops); diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 554626e..d03a926 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -275,6 +275,7 @@ static void scsi_host_dev_release(struct device *dev) { struct Scsi_Host *shost = dev_to_shost(dev); struct device *parent = dev->parent; + struct request_queue *q; scsi_proc_hostdir_rm(shost->hostt); @@ -282,9 +283,11 @@ static void scsi_host_dev_release(struct device *dev) kthread_stop(shost->ehandler); if (shost->work_q) destroy_workqueue(shost->work_q); - if (shost->uspace_req_q) { - kfree(shost->uspace_req_q->queuedata); - scsi_free_queue(shost->uspace_req_q); + q = shost->uspace_req_q; + if (q) { + kfree(q->queuedata); + q->queuedata = NULL; + scsi_free_queue(q); } scsi_destroy_command_freelist(shost); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 1492e3e..1ae7b7c 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1672,6 +1672,15 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) void scsi_free_queue(struct request_queue *q) { + unsigned long flags; + + WARN_ON(q->queuedata); + + /* cause scsi_request_fn() to kill all non-finished requests */ + spin_lock_irqsave(q->queue_lock, flags); + q->request_fn(q); + spin_unlock_irqrestore(q->queue_lock, flags); + blk_cleanup_queue(q); } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 5081f97..723da1d 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -461,14 +461,16 @@ static void st_scsi_execute_end(struct request *req, int uptodate) { struct st_request *SRpnt = req->end_io_data; struct scsi_tape *STp = SRpnt->stp; + struct bio *tmp; STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; STp->buffer->cmdstat.residual = req->resid_len; + tmp = SRpnt->bio; if (SRpnt->waiting) complete(SRpnt->waiting); - blk_rq_unmap_user(SRpnt->bio); + blk_rq_unmap_user(tmp); __blk_put_request(req->q, req); } diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 24661cd..1e4f831 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration) } +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_360_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct async_icount cnow; + + local_irq_disable(); + cnow = info->state->icount; + local_irq_enable(); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + + return 0; +} + static int rs_360_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { @@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file, if (serial_paranoia_check(info, tty->name, "rs_ioctl")) return -ENODEV; - if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (cmd != TIOCMIWAIT) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } @@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file, return 0; #endif - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - local_irq_disable(); - cnow = info->state->icount; - local_irq_enable(); - p_cuser = (struct serial_icounter_struct *) arg; -/* error = put_user(cnow.cts, &p_cuser->cts); */ -/* if (error) return error; */ -/* error = put_user(cnow.dsr, &p_cuser->dsr); */ -/* if (error) return error; */ -/* error = put_user(cnow.rng, &p_cuser->rng); */ -/* if (error) return error; */ -/* error = put_user(cnow.dcd, &p_cuser->dcd); */ -/* if (error) return error; */ - - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - return 0; default: return -ENOIOCTLCMD; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index dcc7244..772d9d8 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1067,10 +1067,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ -static int uart_get_count(struct uart_state *state, - struct serial_icounter_struct __user *icnt) +static int uart_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) { - struct serial_icounter_struct icount; + struct uart_state *state = tty->driver_data; struct uart_icount cnow; struct uart_port *uport = state->uart_port; @@ -1078,19 +1078,19 @@ static int uart_get_count(struct uart_state *state, memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); spin_unlock_irq(&uport->lock); - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; - return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0; + return 0; } /* @@ -1143,10 +1143,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, case TIOCMIWAIT: ret = uart_wait_modem_status(state, arg); break; - - case TIOCGICOUNT: - ret = uart_get_count(state, uarg); - break; } if (ret != -ENOIOCTLCMD) @@ -2322,6 +2318,7 @@ static const struct tty_operations uart_ops = { #endif .tiocmget = uart_tiocmget, .tiocmset = uart_tiocmset, + .get_icount = uart_get_icount, #ifdef CONFIG_CONSOLE_POLL .poll_init = uart_poll_init, .poll_get_char = uart_poll_get_char, diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 93448eb..e163df9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,15 +47,42 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam B/C500 */ { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C600 */ + { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C905 */ + { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C210 */ + { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C260 */ + { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C310 */ { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C910 */ + { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C160 */ + { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Pro 9000 */ + { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam E3500 */ + { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Vision Pro */ + { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7a4b41c..5689b90 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2355,13 +2355,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ termios->c_cflag &= ~CMSPAR; @@ -2398,6 +2404,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2423,6 +2430,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 150cad4..9f89940 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -101,7 +101,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3d10d7f..c38b8c0 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -145,10 +145,6 @@ #define ADLINK_VENDOR_ID 0x0b63 #define ADLINK_ND6530_PRODUCT_ID 0x6530 -/* WinChipHead USB->RS 232 adapter */ -#define WINCHIPHEAD_VENDOR_ID 0x4348 -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 - /* SMART USB Serial Adapter */ #define SMART_VENDOR_ID 0x0b8c #define SMART_PRODUCT_ID 0x2303 diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index bd3fa7f..f23f3b4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -562,6 +562,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, return -EINVAL; } +static int serial_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + + dbg("%s - port %d", __func__, port->number); + + if (port->serial->type->get_icount) + return port->serial->type->get_icount(tty, icount); + return -EINVAL; +} + /* * We would be calling tty_wakeup here, but unfortunately some line * disciplines have an annoying habit of calling tty->write from @@ -1214,6 +1226,7 @@ static const struct tty_operations serial_ops = { .chars_in_buffer = serial_chars_in_buffer, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, + .get_icount = serial_get_icount, .cleanup = serial_cleanup, .install = serial_install, .proc_fops = &serial_proc_fops, diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index fc310f7..0fded39 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -58,7 +58,9 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) { - /* Pad the SCSI command with zeros out to 12 bytes + /* + * Pad the SCSI command with zeros out to 12 bytes. If the + * command already is 12 bytes or longer, leave it alone. * * NOTE: This only works because a scsi_cmnd struct field contains * a unsigned char cmnd[16], so we know we have storage available @@ -66,9 +68,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) for (; srb->cmd_len<12; srb->cmd_len++) srb->cmnd[srb->cmd_len] = 0; - /* set command length to 12 bytes */ - srb->cmd_len = 12; - /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 009ca4e..15ed43e 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -536,7 +536,7 @@ int bind_ipi_to_irqhandler(enum ipi_vector ipi, if (irq < 0) return irq; - irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME; + irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME | IRQF_EARLY_RESUME; retval = request_irq(irq, handler, irqflags, devname, dev_id); if (retval != 0) { unbind_from_irq(irq); diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c index e673a88..b1ce4c7 100644 --- a/fs/hfs/trans.c +++ b/fs/hfs/trans.c @@ -40,6 +40,8 @@ int hfs_mac2asc(struct super_block *sb, char *out, const struct hfs_name *in) src = in->name; srclen = in->len; + if (srclen > HFS_NAMELEN) + srclen = HFS_NAMELEN; dst = out; dstlen = HFS_MAX_NAMELEN; if (nls_io) { diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 4528f29..c739150 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -54,6 +54,8 @@ * irq line disabled until the threaded handler has been run. * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set + * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device + * resume time. */ #define IRQF_DISABLED 0x00000020 #define IRQF_SAMPLE_RANDOM 0x00000040 @@ -66,6 +68,7 @@ #define IRQF_ONESHOT 0x00002000 #define IRQF_NO_SUSPEND 0x00004000 #define IRQF_FORCE_RESUME 0x00008000 +#define IRQF_EARLY_RESUME 0x00020000 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND) @@ -198,13 +201,16 @@ extern void suspend_device_irqs(void); extern void resume_device_irqs(void); #ifdef CONFIG_PM_SLEEP extern int check_wakeup_irqs(void); +extern void irq_pm_syscore_resume(void); #else static inline int check_wakeup_irqs(void) { return 0; } +static inline void irq_pm_syscore_resume(void) { }; #endif #else static inline void suspend_device_irqs(void) { }; static inline void resume_device_irqs(void) { }; static inline int check_wakeup_irqs(void) { return 0; } +static inline void irq_pm_syscore_resume(void) { }; #endif #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index b086779..db2d227 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -224,6 +224,12 @@ * unless the tty also has a valid tty->termiox pointer. * * Optional: Called under the termios lock + * + * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount); + * + * Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel + * structure to complete. This method is optional and will only be called + * if provided (otherwise EINVAL will be returned). */ #include @@ -232,6 +238,7 @@ struct tty_struct; struct tty_driver; +struct serial_icounter_struct; struct tty_operations { struct tty_struct * (*lookup)(struct tty_driver *driver, @@ -268,6 +275,8 @@ struct tty_operations { unsigned int set, unsigned int clear); int (*resize)(struct tty_struct *tty, struct winsize *ws); int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew); + int (*get_icount)(struct tty_struct *tty, + struct serial_icounter_struct *icount); #ifdef CONFIG_CONSOLE_POLL int (*poll_init)(struct tty_driver *driver, int line, char *options); int (*poll_get_char)(struct tty_driver *driver, int line); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index bb911e3..78670cb 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -259,6 +259,8 @@ struct usb_serial_driver { int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); + int (*get_icount)(struct tty_struct *tty, + struct serial_icounter_struct *icount); /* Called by the tty layer for port level work. There may or may not be an attached tty at this point */ void (*dtr_rts)(struct usb_serial_port *port, int on); diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 3c123c3..819a634 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -13,6 +13,7 @@ struct vm_area_struct; /* vma defining user mapping in mm_types.h */ #define VM_MAP 0x00000004 /* vmap()ed pages */ #define VM_USERMAP 0x00000008 /* suitable for remap_vmalloc_range */ #define VM_VPAGES 0x00000010 /* buffer for pages was vmalloc'ed */ +#define VM_UNLIST 0x00000020 /* vm_struct is not listed in vmlist */ /* bits [20..32] reserved for arch specific ioremap internals */ /* diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c index 0067abb..b1fc3dd 100644 --- a/kernel/irq/pm.c +++ b/kernel/irq/pm.c @@ -39,25 +39,46 @@ void suspend_device_irqs(void) } EXPORT_SYMBOL_GPL(suspend_device_irqs); -/** - * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs() - * - * Enable all interrupt lines previously disabled by suspend_device_irqs() that - * have the IRQ_SUSPENDED flag set. - */ -void resume_device_irqs(void) +static void resume_irqs(bool want_early) { struct irq_desc *desc; int irq; for_each_irq_desc(irq, desc) { unsigned long flags; + bool is_early = desc->action && + desc->action->flags & IRQF_EARLY_RESUME; + + if (is_early != want_early) + continue; spin_lock_irqsave(&desc->lock, flags); __enable_irq(desc, irq, true); spin_unlock_irqrestore(&desc->lock, flags); } } + +/** + * irq_pm_syscore_ops - enable interrupt lines early + * + * Enable all interrupt lines with %IRQF_EARLY_RESUME set. + */ +void irq_pm_syscore_resume(void) +{ + resume_irqs(true); +} + +/** + * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs() + * + * Enable all non-%IRQF_EARLY_RESUME interrupt lines previously + * disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag + * set as well as those with %IRQF_FORCE_RESUME. + */ +void resume_device_irqs(void) +{ + resume_irqs(false); +} EXPORT_SYMBOL_GPL(resume_device_irqs); /** diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 6f10dfc..40dd021 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -293,7 +293,7 @@ int enter_state(suspend_state_t state) */ int pm_suspend(suspend_state_t state) { - if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX) + if (state > PM_SUSPEND_ON && state < PM_SUSPEND_MAX) return enter_state(state); return -EINVAL; } diff --git a/lib/nlattr.c b/lib/nlattr.c index c4706eb..109d4fe 100644 --- a/lib/nlattr.c +++ b/lib/nlattr.c @@ -20,6 +20,7 @@ static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = { [NLA_U16] = sizeof(u16), [NLA_U32] = sizeof(u32), [NLA_U64] = sizeof(u64), + [NLA_MSECS] = sizeof(u64), [NLA_NESTED] = NLA_HDRLEN, }; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 7221e9e..f34ffd0 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1203,17 +1203,22 @@ EXPORT_SYMBOL_GPL(map_vm_area); DEFINE_RWLOCK(vmlist_lock); struct vm_struct *vmlist; -static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va, +static void setup_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va, unsigned long flags, void *caller) { - struct vm_struct *tmp, **p; - vm->flags = flags; vm->addr = (void *)va->va_start; vm->size = va->va_end - va->va_start; vm->caller = caller; va->private = vm; va->flags |= VM_VM_AREA; +} + +static void insert_vmalloc_vmlist(struct vm_struct *vm) +{ + struct vm_struct *tmp, **p; + + vm->flags &= ~VM_UNLIST; write_lock(&vmlist_lock); for (p = &vmlist; (tmp = *p) != NULL; p = &tmp->next) { @@ -1225,6 +1230,13 @@ static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va, write_unlock(&vmlist_lock); } +static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va, + unsigned long flags, void *caller) +{ + setup_vmalloc_vm(vm, va, flags, caller); + insert_vmalloc_vmlist(vm); +} + static struct vm_struct *__get_vm_area_node(unsigned long size, unsigned long align, unsigned long flags, unsigned long start, unsigned long end, int node, gfp_t gfp_mask, void *caller) @@ -1263,7 +1275,18 @@ static struct vm_struct *__get_vm_area_node(unsigned long size, return NULL; } - insert_vmalloc_vm(area, va, flags, caller); + /* + * When this function is called from __vmalloc_node, + * we do not add vm_struct to vmlist here to avoid + * accessing uninitialized members of vm_struct such as + * pages and nr_pages fields. They will be set later. + * To distinguish it from others, we use a VM_UNLIST flag. + */ + if (flags & VM_UNLIST) + setup_vmalloc_vm(area, va, flags, caller); + else + insert_vmalloc_vm(area, va, flags, caller); + return area; } @@ -1338,17 +1361,20 @@ struct vm_struct *remove_vm_area(const void *addr) va = find_vmap_area((unsigned long)addr); if (va && va->flags & VM_VM_AREA) { struct vm_struct *vm = va->private; - struct vm_struct *tmp, **p; - /* - * remove from list and disallow access to this vm_struct - * before unmap. (address range confliction is maintained by - * vmap.) - */ - write_lock(&vmlist_lock); - for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next) - ; - *p = tmp->next; - write_unlock(&vmlist_lock); + + if (!(vm->flags & VM_UNLIST)) { + struct vm_struct *tmp, **p; + /* + * remove from list and disallow access to + * this vm_struct before unmap. (address range + * confliction is maintained by vmap.) + */ + write_lock(&vmlist_lock); + for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next) + ; + *p = tmp->next; + write_unlock(&vmlist_lock); + } vmap_debug_free_range(va->va_start, va->va_end); free_unmap_vmap_area(va); @@ -1568,8 +1594,9 @@ static void *__vmalloc_node(unsigned long size, unsigned long align, if (!size || (size >> PAGE_SHIFT) > totalram_pages) return NULL; - area = __get_vm_area_node(size, align, VM_ALLOC, VMALLOC_START, - VMALLOC_END, node, gfp_mask, caller); + area = __get_vm_area_node(size, align, VM_ALLOC | VM_UNLIST, + VMALLOC_START, VMALLOC_END, node, + gfp_mask, caller); if (!area) return NULL; @@ -1577,6 +1604,12 @@ static void *__vmalloc_node(unsigned long size, unsigned long align, addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller); /* + * In this function, newly allocated vm_struct is not added + * to vmlist at __get_vm_area_node(). so, it is added here. + */ + insert_vmalloc_vmlist(area); + + /* * A ref_count = 3 is needed because the vm_struct and vmap_area * structures allocated in the __get_vm_area_node() function contain * references to the virtual address of the vmalloc'ed block. diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index cab71ea..5f6a305 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned BT_DBG("TIOCMIWAIT"); break; - case TIOCGICOUNT: - BT_DBG("TIOCGICOUNT"); - break; - case TIOCGSERIAL: BT_ERR("TIOCGSERIAL is not supported"); return -ENOIOCTLCMD; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index ca520d4..9cc6289 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1141,7 +1141,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, int features) skb->ip_summed = CHECKSUM_NONE; /* Check if there is enough headroom to insert fragment header. */ - if ((skb_headroom(skb) < frag_hdr_sz) && + if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) && pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC)) goto out; diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c index 46b2647..adaa02c 100644 --- a/net/sunrpc/auth_unix.c +++ b/net/sunrpc/auth_unix.c @@ -129,6 +129,9 @@ unx_match(struct auth_cred *acred, struct rpc_cred *rcred, int flags) for (i = 0; i < groups ; i++) if (cred->uc_gids[i] != GROUP_AT(acred->group_info, i)) return 0; + if (groups < NFS_NGROUPS && + cred->uc_gids[groups] != NOGROUP) + return 0; return 1; } diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index c67e73e..92b62a8 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -118,6 +118,11 @@ cc-option-yn = $(call try-run,\ cc-option-align = $(subst -functions=0,,\ $(call cc-option,-falign-functions=0,-malign-functions=0)) +# cc-disable-warning +# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) +cc-disable-warning = $(call try-run,\ + $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -xc /dev/null -o "$$TMP",-Wno-$(strip $(1))) + # cc-version # Usage gcc-ver := $(call cc-version) cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2db8b5a..ba44dc0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12664,7 +12664,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One", ALC268_ACER_ASPIRE_ONE), SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), - SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO), SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0, "Dell Inspiron Mini9/Vostro A90", ALC268_DELL), /* almost compatible with toshiba but with optional digital outs; diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 63bc2ae..6fa3152 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -472,6 +472,7 @@ static int wm8940_set_bias_level(struct snd_soc_codec *codec, ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg); break; } + codec->bias_level = level; return ret; }