## Automatically generated incremental diff
## From:   linux-2.6.13-rc4
## To:     linux-2.6.13-rc5
## Robot:  $Id: make-incremental-diff,v 1.12 2004/01/06 07:19:36 hpa Exp $

diff -urN linux-2.6.13-rc4/Documentation/SubmittingPatches linux-2.6.13-rc5/Documentation/SubmittingPatches
--- linux-2.6.13-rc4/Documentation/SubmittingPatches	2005-08-01 22:29:02.664241013 -0700
+++ linux-2.6.13-rc5/Documentation/SubmittingPatches	2005-08-01 22:29:09.663548642 -0700
@@ -149,6 +149,11 @@
 MAINTAINERS file for a mailing list that relates specifically to
 your change.
 
+If changes affect userland-kernel interfaces, please send
+the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
+a man-pages patch, or at least a notification of the change,
+so that some information makes its way into the manual pages.
+
 Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
diff -urN linux-2.6.13-rc4/Documentation/fb/vesafb.txt linux-2.6.13-rc5/Documentation/fb/vesafb.txt
--- linux-2.6.13-rc4/Documentation/fb/vesafb.txt	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/Documentation/fb/vesafb.txt	2005-08-01 22:29:09.671548994 -0700
@@ -144,7 +144,21 @@
 	This is the default.
 pmipal	Use the protected mode interface for palette changes.
 
-mtrr	setup memory type range registers for the vesafb framebuffer.
+mtrr:n	setup memory type range registers for the vesafb framebuffer
+	where n:
+	      0 - disabled (equivalent to nomtrr)
+	      1 - uncachable
+	      2 - write-back
+	      3 - write-combining (default)
+	      4 - write-through
+
+	If you see the following in dmesg, choose the type that matches the
+	old one. In this example, use "mtrr:2".
+...
+mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
+...
+
+nomtrr  disable mtrr
 
 vremap:n
         remap 'n' MiB of video RAM. If 0 or not specified, remap memory
diff -urN linux-2.6.13-rc4/Documentation/networking/bonding.txt linux-2.6.13-rc5/Documentation/networking/bonding.txt
--- linux-2.6.13-rc4/Documentation/networking/bonding.txt	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/Documentation/networking/bonding.txt	2005-08-01 22:29:09.697550137 -0700
@@ -1,5 +1,7 @@
 
-                   Linux Ethernet Bonding Driver HOWTO
+		Linux Ethernet Bonding Driver HOWTO
+
+		Latest update: 21 June 2005
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -11,15 +13,22 @@
 
 Reorganized and updated Feb 2005 by Jay Vosburgh
 
-Note :
-------
+Introduction
+============
+
+	The Linux bonding driver provides a method for aggregating
+multiple network interfaces into a single logical "bonded" interface.
+The behavior of the bonded interfaces depends upon the mode; generally
+speaking, modes provide either hot standby or load balancing services.
+Additionally, link integrity monitoring may be performed.
 	
-The bonding driver originally came from Donald Becker's beowulf patches for
-kernel 2.0. It has changed quite a bit since, and the original tools from
-extreme-linux and beowulf sites will not work with this version of the driver.
+	The bonding driver originally came from Donald Becker's
+beowulf patches for kernel 2.0. It has changed quite a bit since, and
+the original tools from extreme-linux and beowulf sites will not work
+with this version of the driver.
 
-For new versions of the driver, patches for older kernels and the updated
-userspace tools, please follow the links at the end of this file.
+	For new versions of the driver, updated userspace tools, and
+who to ask for help, please follow the links at the end of this file.
 
 Table of Contents
 =================
@@ -30,9 +39,13 @@
 
 3. Configuring Bonding Devices
 3.1	Configuration with sysconfig support
+3.1.1		Using DHCP with sysconfig
+3.1.2		Configuring Multiple Bonds with sysconfig
 3.2	Configuration with initscripts support
+3.2.1		Using DHCP with initscripts
+3.2.2		Configuring Multiple Bonds with initscripts
 3.3	Configuring Bonding Manually
-3.4	Configuring Multiple Bonds
+3.3.1		Configuring Multiple Bonds Manually
 
 5. Querying Bonding Configuration
 5.1	Bonding Configuration
@@ -56,21 +69,30 @@
 
 11. Promiscuous mode
 
-12. High Availability Information
+12. Configuring Bonding for High Availability
 12.1	High Availability in a Single Switch Topology
-12.1.1		Bonding Mode Selection for Single Switch Topology
-12.1.2		Link Monitoring for Single Switch Topology
 12.2	High Availability in a Multiple Switch Topology
-12.2.1		Bonding Mode Selection for Multiple Switch Topology
-12.2.2		Link Monitoring for Multiple Switch Topology
-12.3	Switch Behavior Issues for High Availability
+12.2.1		HA Bonding Mode Selection for Multiple Switch Topology
+12.2.2		HA Link Monitoring for Multiple Switch Topology
+
+13. Configuring Bonding for Maximum Throughput
+13.1	Maximum Throughput in a Single Switch Topology
+13.1.1		MT Bonding Mode Selection for Single Switch Topology
+13.1.2		MT Link Monitoring for Single Switch Topology
+13.2	Maximum Throughput in a Multiple Switch Topology
+13.2.1		MT Bonding Mode Selection for Multiple Switch Topology
+13.2.2		MT Link Monitoring for Multiple Switch Topology
+
+14. Switch Behavior Issues
+14.1	Link Establishment and Failover Delays
+14.2	Duplicated Incoming Packets
 
-13. Hardware Specific Considerations
-13.1	IBM BladeCenter
+15. Hardware Specific Considerations
+15.1	IBM BladeCenter
 
-14. Frequently Asked Questions
+16. Frequently Asked Questions
 
-15. Resources and Links
+17. Resources and Links
 
 
 1. Bonding Driver Installation
@@ -86,16 +108,10 @@
 1.1 Configure and build the kernel with bonding
 -----------------------------------------------
 
-	The latest version of the bonding driver is available in the
+	The current version of the bonding driver is available in the
 drivers/net/bonding subdirectory of the most recent kernel source
-(which is available on http://kernel.org).
-
-	Prior to the 2.4.11 kernel, the bonding driver was maintained
-largely outside the kernel tree; patches for some earlier kernels are
-available on the bonding sourceforge site, although those patches are
-still several years out of date.  Most users will want to use either
-the most recent kernel from kernel.org or whatever kernel came with
-their distro.
+(which is available on http://kernel.org).  Most users "rolling their
+own" will want to use the most recent kernel from kernel.org.
 
 	Configure kernel with "make menuconfig" (or "make xconfig" or
 "make config"), then select "Bonding driver support" in the "Network
@@ -103,8 +119,8 @@
 driver as module since it is currently the only way to pass parameters
 to the driver or configure more than one bonding device.
 
-	Build and install the new kernel and modules, then proceed to
-step 2.
+	Build and install the new kernel and modules, then continue
+below to install ifenslave.
 
 1.2 Install ifenslave Control Utility
 -------------------------------------
@@ -147,9 +163,9 @@
 	Options for the bonding driver are supplied as parameters to
 the bonding module at load time.  They may be given as command line
 arguments to the insmod or modprobe command, but are usually specified
-in either the /etc/modprobe.conf configuration file, or in a
-distro-specific configuration file (some of which are detailed in the
-next section).
+in either the /etc/modules.conf or /etc/modprobe.conf configuration
+file, or in a distro-specific configuration file (some of which are
+detailed in the next section).
 
 	The available bonding driver parameters are listed below. If a
 parameter is not specified the default value is used.  When initially
@@ -162,34 +178,34 @@
 support at least miimon, so there is really no reason not to use it.
 
 	Options with textual values will accept either the text name
-	or, for backwards compatibility, the option value.  E.g.,
-	"mode=802.3ad" and "mode=4" set the same mode.
+or, for backwards compatibility, the option value.  E.g.,
+"mode=802.3ad" and "mode=4" set the same mode.
 
 	The parameters are as follows:
 
 arp_interval
 
-	Specifies the ARP monitoring frequency in milli-seconds. If
-	ARP monitoring is used in a load-balancing mode (mode 0 or 2),
-	the switch should be configured in a mode that evenly
-	distributes packets across all links - such as round-robin. If
-	the switch is configured to distribute the packets in an XOR
+	Specifies the ARP link monitoring frequency in milliseconds.
+	If ARP monitoring is used in an etherchannel compatible mode
+	(modes 0 and 2), the switch should be configured in a mode
+	that evenly distributes packets across all links. If the
+	switch is configured to distribute the packets in an XOR
 	fashion, all replies from the ARP targets will be received on
 	the same link which could cause the other team members to
-	fail. ARP monitoring should not be used in conjunction with
-	miimon. A value of 0 disables ARP monitoring. The default
+	fail.  ARP monitoring should not be used in conjunction with
+	miimon.  A value of 0 disables ARP monitoring.  The default
 	value is 0.
 
 arp_ip_target
 
-	Specifies the ip addresses to use when arp_interval is > 0.
-	These are the targets of the ARP request sent to determine the
-	health of the link to the targets.  Specify these values in
-	ddd.ddd.ddd.ddd format.  Multiple ip adresses must be
-	seperated by a comma.  At least one IP address must be given
-	for ARP monitoring to function.  The maximum number of targets
-	that can be specified is 16.  The default value is no IP
-	addresses.
+	Specifies the IP addresses to use as ARP monitoring peers when
+	arp_interval is > 0.  These are the targets of the ARP request
+	sent to determine the health of the link to the targets.
+	Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP
+	addresses must be separated by a comma.  At least one IP
+	address must be given for ARP monitoring to function.  The
+	maximum number of targets that can be specified is 16.  The
+	default value is no IP addresses.
 
 downdelay
 
@@ -207,11 +223,13 @@
 	are:
 
 	slow or 0
-		Request partner to transmit LACPDUs every 30 seconds (default)
+		Request partner to transmit LACPDUs every 30 seconds
 
 	fast or 1
 		Request partner to transmit LACPDUs every 1 second
 
+	The default is slow.
+
 max_bonds
 
 	Specifies the number of bonding devices to create for this
@@ -221,10 +239,11 @@
 
 miimon
 
-	Specifies the frequency in milli-seconds that MII link
-	monitoring will occur.  A value of zero disables MII link
-	monitoring.  A value of 100 is a good starting point.  The
-	use_carrier option, below, affects how the link state is
+	Specifies the MII link monitoring frequency in milliseconds.
+	This determines how often the link state of each slave is
+	inspected for link failures.  A value of zero disables MII
+	link monitoring.  A value of 100 is a good starting point.
+	The use_carrier option, below, affects how the link state is
 	determined.  See the High Availability section for additional
 	information.  The default value is 0.
 
@@ -246,17 +265,31 @@
 		active.  A different slave becomes active if, and only
 		if, the active slave fails.  The bond's MAC address is
 		externally visible on only one port (network adapter)
-		to avoid confusing the switch.  This mode provides
-		fault tolerance.  The primary option affects the
-		behavior of this mode.
+		to avoid confusing the switch.
+
+		In bonding version 2.6.2 or later, when a failover
+		occurs in active-backup mode, bonding will issue one
+		or more gratuitous ARPs on the newly active slave.
+		One gratutious ARP is issued for the bonding master
+		interface and each VLAN interfaces configured above
+		it, provided that the interface has at least one IP
+		address configured.  Gratuitous ARPs issued for VLAN
+		interfaces are tagged with the appropriate VLAN id.
+
+		This mode provides fault tolerance.  The primary
+		option, documented below, affects the behavior of this
+		mode.
 
 	balance-xor or 2
 
-		XOR policy: Transmit based on [(source MAC address
-		XOR'd with destination MAC address) modulo slave
-		count].  This selects the same slave for each
-		destination MAC address.  This mode provides load
-		balancing and fault tolerance.
+		XOR policy: Transmit based on the selected transmit
+		hash policy.  The default policy is a simple [(source
+		MAC address XOR'd with destination MAC address) modulo
+		slave count].  Alternate transmit policies may be
+		selected via the xmit_hash_policy option, described
+		below.
+
+		This mode provides load balancing and fault tolerance.
 
 	broadcast or 3
 
@@ -270,7 +303,17 @@
 		duplex settings.  Utilizes all slaves in the active
 		aggregator according to the 802.3ad specification.
 
-		Pre-requisites:
+		Slave selection for outgoing traffic is done according
+		to the transmit hash policy, which may be changed from
+		the default simple XOR policy via the xmit_hash_policy
+		option, documented below.  Note that not all transmit
+		policies may be 802.3ad compliant, particularly in
+		regards to the packet mis-ordering requirements of
+		section 43.2.4 of the 802.3ad standard.  Differing
+		peer implementations will have varying tolerances for
+		noncompliance.
+
+		Prerequisites:
 
 		1. Ethtool support in the base drivers for retrieving
 		the speed and duplex of each slave.
@@ -333,7 +376,7 @@
 
 		When a link is reconnected or a new slave joins the
 		bond the receive traffic is redistributed among all
-		active slaves in the bond by intiating ARP Replies
+		active slaves in the bond by initiating ARP Replies
 		with the selected mac address to each of the
 		clients. The updelay parameter (detailed below) must
 		be set to a value equal or greater than the switch's
@@ -396,6 +439,60 @@
 	0 will use the deprecated MII / ETHTOOL ioctls.  The default
 	value is 1.
 
+xmit_hash_policy
+
+	Selects the transmit hash policy to use for slave selection in
+	balance-xor and 802.3ad modes.  Possible values are:
+
+	layer2
+
+		Uses XOR of hardware MAC addresses to generate the
+		hash.  The formula is
+
+		(source MAC XOR destination MAC) modulo slave count
+
+		This algorithm will place all traffic to a particular
+		network peer on the same slave.
+
+		This algorithm is 802.3ad compliant.
+
+	layer3+4
+
+		This policy uses upper layer protocol information,
+		when available, to generate the hash.  This allows for
+		traffic to a particular network peer to span multiple
+		slaves, although a single connection will not span
+		multiple slaves.
+
+		The formula for unfragmented TCP and UDP packets is
+
+		((source port XOR dest port) XOR
+			 ((source IP XOR dest IP) AND 0xffff)
+				modulo slave count
+
+		For fragmented TCP or UDP packets and all other IP
+		protocol traffic, the source and destination port
+		information is omitted.  For non-IP traffic, the
+		formula is the same as for the layer2 transmit hash
+		policy.
+
+		This policy is intended to mimic the behavior of
+		certain switches, notably Cisco switches with PFC2 as
+		well as some Foundry and IBM products.
+
+		This algorithm is not fully 802.3ad compliant.  A
+		single TCP or UDP conversation containing both
+		fragmented and unfragmented packets will see packets
+		striped across two interfaces.  This may result in out
+		of order delivery.  Most traffic types will not meet
+		this criteria, as TCP rarely fragments traffic, and
+		most UDP traffic is not involved in extended
+		conversations.  Other implementations of 802.3ad may
+		or may not tolerate this noncompliance.
+
+	The default value is layer2.  This option was added in bonding
+version 2.6.3.  In earlier versions of bonding, this parameter does
+not exist, and the layer2 policy is the only policy.
 
 
 3. Configuring Bonding Devices
@@ -448,8 +545,9 @@
 slave devices.  On SLES 9, this is most easily done by running the
 yast2 sysconfig configuration utility.  The goal is for to create an
 ifcfg-id file for each slave device.  The simplest way to accomplish
-this is to configure the devices for DHCP.  The name of the
-configuration file for each device will be of the form:
+this is to configure the devices for DHCP (this is only to get the
+file ifcfg-id file created; see below for some issues with DHCP).  The
+name of the configuration file for each device will be of the form:
 
 ifcfg-id-xx:xx:xx:xx:xx:xx
 
@@ -459,7 +557,7 @@
 	Once the set of ifcfg-id-xx:xx:xx:xx:xx:xx files has been
 created, it is necessary to edit the configuration files for the slave
 devices (the MAC addresses correspond to those of the slave devices).
-Before editing, the file will contain muliple lines, and will look
+Before editing, the file will contain multiple lines, and will look
 something like this:
 
 BOOTPROTO='dhcp'
@@ -496,16 +594,11 @@
 BONDING_MASTER="yes"
 BONDING_MODULE_OPTS="mode=active-backup miimon=100"
 BONDING_SLAVE0="eth0"
-BONDING_SLAVE1="eth1"
+BONDING_SLAVE1="bus-pci-0000:06:08.1"
 
 	Replace the sample BROADCAST, IPADDR, NETMASK and NETWORK
 values with the appropriate values for your network.
 
-	Note that configuring the bonding device with BOOTPROTO='dhcp'
-does not work; the scripts attempt to obtain the device address from
-DHCP prior to adding any of the slave devices.  Without active slaves,
-the DHCP requests are not sent to the network.
-
 	The STARTMODE specifies when the device is brought online.
 The possible values are:
 
@@ -531,9 +624,17 @@
 the max_bonds bonding parameter; this will confuse the configuration
 system if you have multiple bonding devices.
 
-	Finally, supply one BONDING_SLAVEn="ethX" for each slave,
-where "n" is an increasing value, one for each slave, and "ethX" is
-the name of the slave device (eth0, eth1, etc).
+	Finally, supply one BONDING_SLAVEn="slave device" for each
+slave.  where "n" is an increasing value, one for each slave.  The
+"slave device" is either an interface name, e.g., "eth0", or a device
+specifier for the network device.  The interface name is easier to
+find, but the ethN names are subject to change at boot time if, e.g.,
+a device early in the sequence has failed.  The device specifiers
+(bus-pci-0000:06:08.1 in the example above) specify the physical
+network device, and will not change unless the device's bus location
+changes (for example, it is moved from one PCI slot to another).  The
+example above uses one of each type for demonstration purposes; most
+configurations will choose one or the other for all slave devices.
 
 	When all configuration files have been modified or created,
 networking must be restarted for the configuration changes to take
@@ -544,7 +645,7 @@
 	Note that the network control script (/sbin/ifdown) will
 remove the bonding module as part of the network shutdown processing,
 so it is not necessary to remove the module by hand if, e.g., the
-module paramters have changed.
+module parameters have changed.
 
 	Also, at this writing, YaST/YaST2 will not manage bonding
 devices (they do not show bonding interfaces on its list of network
@@ -559,12 +660,37 @@
 	Note that the template does not document the various BONDING_
 settings described above, but does describe many of the other options.
 
+3.1.1 Using DHCP with sysconfig
+-------------------------------
+
+	Under sysconfig, configuring a device with BOOTPROTO='dhcp'
+will cause it to query DHCP for its IP address information.  At this
+writing, this does not function for bonding devices; the scripts
+attempt to obtain the device address from DHCP prior to adding any of
+the slave devices.  Without active slaves, the DHCP requests are not
+sent to the network.
+
+3.1.2 Configuring Multiple Bonds with sysconfig
+-----------------------------------------------
+
+	The sysconfig network initialization system is capable of
+handling multiple bonding devices.  All that is necessary is for each
+bonding instance to have an appropriately configured ifcfg-bondX file
+(as described above).  Do not specify the "max_bonds" parameter to any
+instance of bonding, as this will confuse sysconfig.  If you require
+multiple bonding devices with identical parameters, create multiple
+ifcfg-bondX files.
+
+	Because the sysconfig scripts supply the bonding module
+options in the ifcfg-bondX file, it is not necessary to add them to
+the system /etc/modules.conf or /etc/modprobe.conf configuration file.
+
 3.2 Configuration with initscripts support
 ------------------------------------------
 
 	This section applies to distros using a version of initscripts
 with bonding support, for example, Red Hat Linux 9 or Red Hat
-Enterprise Linux version 3.  On these systems, the network
+Enterprise Linux version 3 or 4.  On these systems, the network
 initialization scripts have some knowledge of bonding, and can be
 configured to control bonding devices.
 
@@ -614,10 +740,11 @@
 	Be sure to change the networking specific lines (IPADDR,
 NETMASK, NETWORK and BROADCAST) to match your network configuration.
 
-	Finally, it is necessary to edit /etc/modules.conf to load the
-bonding module when the bond0 interface is brought up.  The following
-sample lines in /etc/modules.conf will load the bonding module, and
-select its options:
+	Finally, it is necessary to edit /etc/modules.conf (or
+/etc/modprobe.conf, depending upon your distro) to load the bonding
+module with your desired options when the bond0 interface is brought
+up.  The following lines in /etc/modules.conf (or modprobe.conf) will
+load the bonding module, and select its options:
 
 alias bond0 bonding
 options bond0 mode=balance-alb miimon=100
@@ -629,6 +756,33 @@
 will restart the networking subsystem and your bond link should be now
 up and running.
 
+3.2.1 Using DHCP with initscripts
+---------------------------------
+
+	Recent versions of initscripts (the version supplied with
+Fedora Core 3 and Red Hat Enterprise Linux 4 is reported to work) do
+have support for assigning IP information to bonding devices via DHCP.
+
+	To configure bonding for DHCP, configure it as described
+above, except replace the line "BOOTPROTO=none" with "BOOTPROTO=dhcp"
+and add a line consisting of "TYPE=Bonding".  Note that the TYPE value
+is case sensitive.
+
+3.2.2 Configuring Multiple Bonds with initscripts
+-------------------------------------------------
+
+	At this writing, the initscripts package does not directly
+support loading the bonding driver multiple times, so the process for
+doing so is the same as described in the "Configuring Multiple Bonds
+Manually" section, below.
+
+	NOTE: It has been observed that some Red Hat supplied kernels
+are apparently unable to rename modules at load time (the "-obonding1"
+part).  Attempts to pass that option to modprobe will produce an
+"Operation not permitted" error.  This has been reported on some
+Fedora Core kernels, and has been seen on RHEL 4 as well.  On kernels
+exhibiting this problem, it will be impossible to configure multiple
+bonds with differing parameters.
 
 3.3 Configuring Bonding Manually
 --------------------------------
@@ -638,10 +792,11 @@
 knowledge of bonding.  One such distro is SuSE Linux Enterprise Server
 version 8.
 
-	The general methodology for these systems is to place the
-bonding module parameters into /etc/modprobe.conf, then add modprobe
-and/or ifenslave commands to the system's global init script.  The
-name of the global init script differs; for sysconfig, it is
+	The general method for these systems is to place the bonding
+module parameters into /etc/modules.conf or /etc/modprobe.conf (as
+appropriate for the installed distro), then add modprobe and/or
+ifenslave commands to the system's global init script.  The name of
+the global init script differs; for sysconfig, it is
 /etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local.
 
 	For example, if you wanted to make a simple bond of two e100
@@ -649,7 +804,7 @@
 reboots, edit the appropriate file (/etc/init.d/boot.local or
 /etc/rc.d/rc.local), and add the following:
 
-modprobe bonding -obond0 mode=balance-alb miimon=100
+modprobe bonding mode=balance-alb miimon=100
 modprobe e100
 ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
 ifenslave bond0 eth0
@@ -657,11 +812,7 @@
 
 	Replace the example bonding module parameters and bond0
 network configuration (IP address, netmask, etc) with the appropriate
-values for your configuration.  The above example loads the bonding
-module with the name "bond0," this simplifies the naming if multiple
-bonding modules are loaded (each successive instance of the module is
-given a different name, and the module instance names match the
-bonding interface names).
+values for your configuration.
 
 	Unfortunately, this method will not provide support for the
 ifup and ifdown scripts on the bond devices.  To reload the bonding
@@ -684,20 +835,23 @@
 the following:
 
 # ifconfig bond0 down
-# rmmod bond0
+# rmmod bonding
 # rmmod e100
 
 	Again, for convenience, it may be desirable to create a script
 with these commands.
 
 
-3.4 Configuring Multiple Bonds
-------------------------------
+3.3.1 Configuring Multiple Bonds Manually
+-----------------------------------------
 
 	This section contains information on configuring multiple
-bonding devices with differing options.  If you require multiple
-bonding devices, but all with the same options, see the "max_bonds"
-module paramter, documented above.
+bonding devices with differing options for those systems whose network
+initialization scripts lack support for configuring multiple bonds.
+
+	If you require multiple bonding devices, but all with the same
+options, you may wish to use the "max_bonds" module parameter,
+documented above.
 
 	To create multiple bonding devices with differing options, it
 is necessary to load the bonding driver multiple times.  Note that
@@ -724,11 +878,16 @@
 miimon of 100.  The second instance is named "bond1" and creates the
 bond1 device in balance-alb mode with an miimon of 50.
 
+	In some circumstances (typically with older distributions),
+the above does not work, and the second bonding instance never sees
+its options.  In that case, the second options line can be substituted
+as follows:
+
+install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50
+
 	This may be repeated any number of times, specifying a new and
-unique name in place of bond0 or bond1 for each instance.
+unique name in place of bond1 for each subsequent instance.
 
-	When the appropriate module paramters are in place, then
-configure bonding according to the instructions for your distro.
 
 5. Querying Bonding Configuration 
 =================================
@@ -846,8 +1005,8 @@
 self generated packets.
 
 	For reasons of simplicity, and to support the use of adapters
-that can do VLAN hardware acceleration offloding, the bonding
-interface declares itself as fully hardware offloaing capable, it gets
+that can do VLAN hardware acceleration offloading, the bonding
+interface declares itself as fully hardware offloading capable, it gets
 the add_vid/kill_vid notifications to gather the necessary
 information, and it propagates those actions to the slaves.  In case
 of mixed adapter types, hardware accelerated tagged packets that
@@ -880,7 +1039,7 @@
 matches the hardware address of the VLAN interfaces.
 
 	Note that changing a VLAN interface's HW address would set the
-underlying device -- i.e. the bonding interface -- to promiscouos
+underlying device -- i.e. the bonding interface -- to promiscuous
 mode, which might not be what you want.
 
 
@@ -923,7 +1082,7 @@
 an additional target (or several) increases the reliability of the ARP
 monitoring.
 
-	Multiple ARP targets must be seperated by commas as follows:
+	Multiple ARP targets must be separated by commas as follows:
 
 # example options for ARP monitoring with three targets
 alias bond0 bonding
@@ -1045,7 +1204,7 @@
 	This will, when loading the bonding module, rather than
 performing the normal action, instead execute the provided command.
 This command loads the device drivers in the order needed, then calls
-modprobe with --ingore-install to cause the normal action to then take
+modprobe with --ignore-install to cause the normal action to then take
 place.  Full documentation on this can be found in the modprobe.conf
 and modprobe manual pages.
 
@@ -1130,14 +1289,14 @@
 common to enable promiscuous mode on the device, so that all traffic
 is seen (instead of seeing only traffic destined for the local host).
 The bonding driver handles promiscuous mode changes to the bonding
-master device (e.g., bond0), and propogates the setting to the slave
+master device (e.g., bond0), and propagates the setting to the slave
 devices.
 
 	For the balance-rr, balance-xor, broadcast, and 802.3ad modes,
-the promiscuous mode setting is propogated to all slaves.
+the promiscuous mode setting is propagated to all slaves.
 
 	For the active-backup, balance-tlb and balance-alb modes, the
-promiscuous mode setting is propogated only to the active slave.
+promiscuous mode setting is propagated only to the active slave.
 
 	For balance-tlb mode, the active slave is the slave currently
 receiving inbound traffic.
@@ -1148,46 +1307,182 @@
 
 	For the active-backup, balance-tlb and balance-alb modes, when
 the active slave changes (e.g., due to a link failure), the
-promiscuous setting will be propogated to the new active slave.
+promiscuous setting will be propagated to the new active slave.
 
-12. High Availability Information
-=================================
+12. Configuring Bonding for High Availability
+=============================================
 
 	High Availability refers to configurations that provide
 maximum network availability by having redundant or backup devices,
-links and switches between the host and the rest of the world.
-
-	There are currently two basic methods for configuring to
-maximize availability. They are dependent on the network topology and
-the primary goal of the configuration, but in general, a configuration
-can be optimized for maximum available bandwidth, or for maximum
-network availability.
+links or switches between the host and the rest of the world.  The
+goal is to provide the maximum availability of network connectivity
+(i.e., the network always works), even though other configurations
+could provide higher throughput.
 
 12.1 High Availability in a Single Switch Topology
 --------------------------------------------------
 
-	If two hosts (or a host and a switch) are directly connected
-via multiple physical links, then there is no network availability
-penalty for optimizing for maximum bandwidth: there is only one switch
-(or peer), so if it fails, you have no alternative access to fail over
-to.
-
-Example 1 : host to switch (or other host)
-
-          +----------+                          +----------+
-          |          |eth0                  eth0|  switch  |
-          | Host A   +--------------------------+    or    |
-          |          +--------------------------+  other   |
-          |          |eth1                  eth1|  host    |
-          +----------+                          +----------+
+	If two hosts (or a host and a single switch) are directly
+connected via multiple physical links, then there is no availability
+penalty to optimizing for maximum bandwidth.  In this case, there is
+only one switch (or peer), so if it fails, there is no alternative
+access to fail over to.  Additionally, the bonding load balance modes
+support link monitoring of their members, so if individual links fail,
+the load will be rebalanced across the remaining devices.
+
+	See Section 13, "Configuring Bonding for Maximum Throughput"
+for information on configuring bonding with one peer device.
+
+12.2 High Availability in a Multiple Switch Topology
+----------------------------------------------------
+
+	With multiple switches, the configuration of bonding and the
+network changes dramatically.  In multiple switch topologies, there is
+a trade off between network availability and usable bandwidth.
+
+	Below is a sample network, configured to maximize the
+availability of the network:
+
+                |                                     |
+                |port3                           port3|
+          +-----+----+                          +-----+----+
+          |          |port2       ISL      port2|          |
+          | switch A +--------------------------+ switch B |
+          |          |                          |          |
+          +-----+----+                          +-----++---+
+                |port1                           port1|
+                |             +-------+               |
+                +-------------+ host1 +---------------+
+                         eth0 +-------+ eth1
+
+	In this configuration, there is a link between the two
+switches (ISL, or inter switch link), and multiple ports connecting to
+the outside world ("port3" on each switch).  There is no technical
+reason that this could not be extended to a third switch.
+
+12.2.1 HA Bonding Mode Selection for Multiple Switch Topology
+-------------------------------------------------------------
 
+	In a topology such as the example above, the active-backup and
+broadcast modes are the only useful bonding modes when optimizing for
+availability; the other modes require all links to terminate on the
+same peer for them to behave rationally.
 
-12.1.1 Bonding Mode Selection for single switch topology
---------------------------------------------------------
+active-backup: This is generally the preferred mode, particularly if
+	the switches have an ISL and play together well.  If the
+	network configuration is such that one switch is specifically
+	a backup switch (e.g., has lower capacity, higher cost, etc),
+	then the primary option can be used to insure that the
+	preferred link is always used when it is available.
+
+broadcast: This mode is really a special purpose mode, and is suitable
+	only for very specific needs.  For example, if the two
+	switches are not connected (no ISL), and the networks beyond
+	them are totally independent.  In this case, if it is
+	necessary for some specific one-way traffic to reach both
+	independent networks, then the broadcast mode may be suitable.
+
+12.2.2 HA Link Monitoring Selection for Multiple Switch Topology
+----------------------------------------------------------------
+
+	The choice of link monitoring ultimately depends upon your
+switch.  If the switch can reliably fail ports in response to other
+failures, then either the MII or ARP monitors should work.  For
+example, in the above example, if the "port3" link fails at the remote
+end, the MII monitor has no direct means to detect this.  The ARP
+monitor could be configured with a target at the remote end of port3,
+thus detecting that failure without switch support.
+
+	In general, however, in a multiple switch topology, the ARP
+monitor can provide a higher level of reliability in detecting end to
+end connectivity failures (which may be caused by the failure of any
+individual component to pass traffic for any reason).  Additionally,
+the ARP monitor should be configured with multiple targets (at least
+one for each switch in the network).  This will insure that,
+regardless of which switch is active, the ARP monitor has a suitable
+target to query.
+
+
+13. Configuring Bonding for Maximum Throughput
+==============================================
+
+13.1 Maximizing Throughput in a Single Switch Topology
+------------------------------------------------------
+
+	In a single switch configuration, the best method to maximize
+throughput depends upon the application and network environment.  The
+various load balancing modes each have strengths and weaknesses in
+different environments, as detailed below.
+
+	For this discussion, we will break down the topologies into
+two categories.  Depending upon the destination of most traffic, we
+categorize them into either "gatewayed" or "local" configurations.
+
+	In a gatewayed configuration, the "switch" is acting primarily
+as a router, and the majority of traffic passes through this router to
+other networks.  An example would be the following:
+
+
+     +----------+                     +----------+
+     |          |eth0            port1|          | to other networks
+     | Host A   +---------------------+ router   +------------------->
+     |          +---------------------+          | Hosts B and C are out
+     |          |eth1            port2|          | here somewhere
+     +----------+                     +----------+
+
+	The router may be a dedicated router device, or another host
+acting as a gateway.  For our discussion, the important point is that
+the majority of traffic from Host A will pass through the router to
+some other network before reaching its final destination.
+
+	In a gatewayed network configuration, although Host A may
+communicate with many other systems, all of its traffic will be sent
+and received via one other peer on the local network, the router.
+
+	Note that the case of two systems connected directly via
+multiple physical links is, for purposes of configuring bonding, the
+same as a gatewayed configuration.  In that case, it happens that all
+traffic is destined for the "gateway" itself, not some other network
+beyond the gateway.
+
+	In a local configuration, the "switch" is acting primarily as
+a switch, and the majority of traffic passes through this switch to
+reach other stations on the same network.  An example would be the
+following:
+
+    +----------+            +----------+       +--------+
+    |          |eth0   port1|          +-------+ Host B |
+    |  Host A  +------------+  switch  |port3  +--------+
+    |          +------------+          |                  +--------+
+    |          |eth1   port2|          +------------------+ Host C |
+    +----------+            +----------+port4             +--------+
+
+
+	Again, the switch may be a dedicated switch device, or another
+host acting as a gateway.  For our discussion, the important point is
+that the majority of traffic from Host A is destined for other hosts
+on the same local network (Hosts B and C in the above example).
+
+	In summary, in a gatewayed configuration, traffic to and from
+the bonded device will be to the same MAC level peer on the network
+(the gateway itself, i.e., the router), regardless of its final
+destination.  In a local configuration, traffic flows directly to and
+from the final destinations, thus, each destination (Host B, Host C)
+will be addressed directly by their individual MAC addresses.
+
+	This distinction between a gatewayed and a local network
+configuration is important because many of the load balancing modes
+available use the MAC addresses of the local network source and
+destination to make load balancing decisions.  The behavior of each
+mode is described below.
+
+
+13.1.1 MT Bonding Mode Selection for Single Switch Topology
+-----------------------------------------------------------
 
 	This configuration is the easiest to set up and to understand,
 although you will have to decide which bonding mode best suits your
-needs.  The tradeoffs for each mode are detailed below:
+needs.  The trade offs for each mode are detailed below:
 
 balance-rr: This mode is the only mode that will permit a single
 	TCP/IP connection to stripe traffic across multiple
@@ -1206,6 +1501,23 @@
 	interface's worth of throughput, even after adjusting
 	tcp_reordering.
 
+	Note that this out of order delivery occurs when both the
+	sending and receiving systems are utilizing a multiple
+	interface bond.  Consider a configuration in which a
+	balance-rr bond feeds into a single higher capacity network
+	channel (e.g., multiple 100Mb/sec ethernets feeding a single
+	gigabit ethernet via an etherchannel capable switch).  In this
+	configuration, traffic sent from the multiple 100Mb devices to
+	a destination connected to the gigabit device will not see
+	packets out of order.  However, traffic sent from the gigabit
+	device to the multiple 100Mb devices may or may not see
+	traffic out of order, depending upon the balance policy of the
+	switch.  Many switches do not support any modes that stripe
+	traffic (instead choosing a port based upon IP or MAC level
+	addresses); for those devices, traffic flowing from the
+	gigabit device to the many 100Mb devices will only utilize one
+	interface.
+
 	If you are utilizing protocols other than TCP/IP, UDP for
 	example, and your application can tolerate out of order
 	delivery, then this mode can allow for single stream datagram
@@ -1220,16 +1532,21 @@
 	connected to the same peer as the primary.  In this case, a
 	load balancing mode (with link monitoring) will provide the
 	same level of network availability, but with increased
-	available bandwidth.  On the plus side, it does not require
-	any configuration of the switch.
+	available bandwidth.  On the plus side, active-backup mode
+	does not require any configuration of the switch, so it may
+	have value if the hardware available does not support any of
+	the load balance modes.
 
 balance-xor: This mode will limit traffic such that packets destined
 	for specific peers will always be sent over the same
 	interface.  Since the destination is determined by the MAC
-	addresses involved, this may be desirable if you have a large
-	network with many hosts.  It is likely to be suboptimal if all
-	your traffic is passed through a single router, however.  As
-	with balance-rr, the switch ports need to be configured for
+	addresses involved, this mode works best in a "local" network
+	configuration (as described above), with destinations all on
+	the same local network.  This mode is likely to be suboptimal
+	if all your traffic is passed through a single router (i.e., a
+	"gatewayed" network configuration, as described above).
+
+	As with balance-rr, the switch ports need to be configured for
 	"etherchannel" or "trunking."
 
 broadcast: Like active-backup, there is not much advantage to this
@@ -1241,122 +1558,131 @@
 	protocol includes automatic configuration of the aggregates,
 	so minimal manual configuration of the switch is needed
 	(typically only to designate that some set of devices is
-	usable for 802.3ad).  The 802.3ad standard also mandates that
-	frames be delivered in order (within certain limits), so in
-	general single connections will not see misordering of
+	available for 802.3ad).  The 802.3ad standard also mandates
+	that frames be delivered in order (within certain limits), so
+	in general single connections will not see misordering of
 	packets.  The 802.3ad mode does have some drawbacks: the
 	standard mandates that all devices in the aggregate operate at
 	the same speed and duplex.  Also, as with all bonding load
 	balance modes other than balance-rr, no single connection will
 	be able to utilize more than a single interface's worth of
-	bandwidth.  Additionally, the linux bonding 802.3ad
-	implementation distributes traffic by peer (using an XOR of
-	MAC addresses), so in general all traffic to a particular
-	destination will use the same interface.  Finally, the 802.3ad
-	mode mandates the use of the MII monitor, therefore, the ARP
-	monitor is not available in this mode.
-
-balance-tlb: This mode is also a good choice for this type of
-	topology.  It has no special switch configuration
-	requirements, and balances outgoing traffic by peer, in a
-	vaguely intelligent manner (not a simple XOR as in balance-xor
-	or 802.3ad mode), so that unlucky MAC addresses will not all
-	"bunch up" on a single interface.  Interfaces may be of
-	differing speeds.  On the down side, in this mode all incoming
-	traffic arrives over a single interface, this mode requires
-	certain ethtool support in the network device driver of the
-	slave interfaces, and the ARP monitor is not available.
-
-balance-alb: This mode is everything that balance-tlb is, and more. It
-	has all of the features (and restrictions) of balance-tlb, and
-	will also balance incoming traffic from peers (as described in
-	the Bonding Module Options section, above).  The only extra
-	down side to this mode is that the network device driver must
-	support changing the hardware address while the device is
-	open.
+	bandwidth.  
 
-12.1.2 Link Monitoring for Single Switch Topology
--------------------------------------------------
+	Additionally, the linux bonding 802.3ad implementation
+	distributes traffic by peer (using an XOR of MAC addresses),
+	so in a "gatewayed" configuration, all outgoing traffic will
+	generally use the same device.  Incoming traffic may also end
+	up on a single device, but that is dependent upon the
+	balancing policy of the peer's 8023.ad implementation.  In a
+	"local" configuration, traffic will be distributed across the
+	devices in the bond.
+
+	Finally, the 802.3ad mode mandates the use of the MII monitor,
+	therefore, the ARP monitor is not available in this mode.
+
+balance-tlb: The balance-tlb mode balances outgoing traffic by peer.
+	Since the balancing is done according to MAC address, in a
+	"gatewayed" configuration (as described above), this mode will
+	send all traffic across a single device.  However, in a
+	"local" network configuration, this mode balances multiple
+	local network peers across devices in a vaguely intelligent
+	manner (not a simple XOR as in balance-xor or 802.3ad mode),
+	so that mathematically unlucky MAC addresses (i.e., ones that
+	XOR to the same value) will not all "bunch up" on a single
+	interface.
+
+	Unlike 802.3ad, interfaces may be of differing speeds, and no
+	special switch configuration is required.  On the down side,
+	in this mode all incoming traffic arrives over a single
+	interface, this mode requires certain ethtool support in the
+	network device driver of the slave interfaces, and the ARP
+	monitor is not available.
+
+balance-alb: This mode is everything that balance-tlb is, and more.
+	It has all of the features (and restrictions) of balance-tlb,
+	and will also balance incoming traffic from local network
+	peers (as described in the Bonding Module Options section,
+	above).
+
+	The only additional down side to this mode is that the network
+	device driver must support changing the hardware address while
+	the device is open.
+
+13.1.2 MT Link Monitoring for Single Switch Topology
+----------------------------------------------------
 
 	The choice of link monitoring may largely depend upon which
 mode you choose to use.  The more advanced load balancing modes do not
 support the use of the ARP monitor, and are thus restricted to using
-the MII monitor (which does not provide as high a level of assurance
-as the ARP monitor).
-
+the MII monitor (which does not provide as high a level of end to end
+assurance as the ARP monitor).
 
-12.2 High Availability in a Multiple Switch Topology
-----------------------------------------------------
+13.2 Maximum Throughput in a Multiple Switch Topology
+-----------------------------------------------------
 
-	With multiple switches, the configuration of bonding and the
-network changes dramatically.  In multiple switch topologies, there is
-a tradeoff between network availability and usable bandwidth.
+	Multiple switches may be utilized to optimize for throughput
+when they are configured in parallel as part of an isolated network
+between two or more systems, for example:
+
+                       +-----------+
+                       |  Host A   | 
+                       +-+---+---+-+
+                         |   |   |
+                +--------+   |   +---------+
+                |            |             |
+         +------+---+  +-----+----+  +-----+----+
+         | Switch A |  | Switch B |  | Switch C |
+         +------+---+  +-----+----+  +-----+----+
+                |            |             |
+                +--------+   |   +---------+
+                         |   |   |
+                       +-+---+---+-+
+                       |  Host B   | 
+                       +-----------+
+
+	In this configuration, the switches are isolated from one
+another.  One reason to employ a topology such as this is for an
+isolated network with many hosts (a cluster configured for high
+performance, for example), using multiple smaller switches can be more
+cost effective than a single larger switch, e.g., on a network with 24
+hosts, three 24 port switches can be significantly less expensive than
+a single 72 port switch.
+
+	If access beyond the network is required, an individual host
+can be equipped with an additional network device connected to an
+external network; this host then additionally acts as a gateway.
 
-	Below is a sample network, configured to maximize the
-availability of the network:
-
-                |                                     |
-                |port3                           port3|
-          +-----+----+                          +-----+----+
-          |          |port2       ISL      port2|          |
-          | switch A +--------------------------+ switch B |
-          |          |                          |          |
-          +-----+----+                          +-----++---+
-                |port1                           port1|
-                |             +-------+               |
-                +-------------+ host1 +---------------+
-                         eth0 +-------+ eth1
-
-	In this configuration, there is a link between the two
-switches (ISL, or inter switch link), and multiple ports connecting to
-the outside world ("port3" on each switch).  There is no technical
-reason that this could not be extended to a third switch.
-
-12.2.1 Bonding Mode Selection for Multiple Switch Topology
-----------------------------------------------------------
-
-	In a topology such as this, the active-backup and broadcast
-modes are the only useful bonding modes; the other modes require all
-links to terminate on the same peer for them to behave rationally.
-
-active-backup: This is generally the preferred mode, particularly if
-	the switches have an ISL and play together well.  If the
-	network configuration is such that one switch is specifically
-	a backup switch (e.g., has lower capacity, higher cost, etc),
-	then the primary option can be used to insure that the
-	preferred link is always used when it is available.
-
-broadcast: This mode is really a special purpose mode, and is suitable
-	only for very specific needs.  For example, if the two
-	switches are not connected (no ISL), and the networks beyond
-	them are totally independant.  In this case, if it is
-	necessary for some specific one-way traffic to reach both
-	independent networks, then the broadcast mode may be suitable.
-
-12.2.2 Link Monitoring Selection for Multiple Switch Topology
+13.2.1 MT Bonding Mode Selection for Multiple Switch Topology
 -------------------------------------------------------------
 
-	The choice of link monitoring ultimately depends upon your
-switch.  If the switch can reliably fail ports in response to other
-failures, then either the MII or ARP monitors should work.  For
-example, in the above example, if the "port3" link fails at the remote
-end, the MII monitor has no direct means to detect this.  The ARP
-monitor could be configured with a target at the remote end of port3,
-thus detecting that failure without switch support.
-
-	In general, however, in a multiple switch topology, the ARP
-monitor can provide a higher level of reliability in detecting link
-failures.  Additionally, it should be configured with multiple targets
-(at least one for each switch in the network).  This will insure that,
-regardless of which switch is active, the ARP monitor has a suitable
-target to query.
+	In actual practice, the bonding mode typically employed in
+configurations of this type is balance-rr.  Historically, in this
+network configuration, the usual caveats about out of order packet
+delivery are mitigated by the use of network adapters that do not do
+any kind of packet coalescing (via the use of NAPI, or because the
+device itself does not generate interrupts until some number of
+packets has arrived).  When employed in this fashion, the balance-rr
+mode allows individual connections between two hosts to effectively
+utilize greater than one interface's bandwidth.
+
+13.2.2 MT Link Monitoring for Multiple Switch Topology
+------------------------------------------------------
+
+	Again, in actual practice, the MII monitor is most often used
+in this configuration, as performance is given preference over
+availability.  The ARP monitor will function in this topology, but its
+advantages over the MII monitor are mitigated by the volume of probes
+needed as the number of systems involved grows (remember that each
+host in the network is configured with bonding).
 
+14. Switch Behavior Issues
+==========================
 
-12.3 Switch Behavior Issues for High Availability
--------------------------------------------------
+14.1 Link Establishment and Failover Delays
+-------------------------------------------
 
-	You may encounter issues with the timing of link up and down
-reporting by the switch.
+	Some switches exhibit undesirable behavior with regard to the
+timing of link up and down reporting by the switch.
 
 	First, when a link comes up, some switches may indicate that
 the link is up (carrier available), but not pass traffic over the
@@ -1370,30 +1696,70 @@
 	Second, some switches may "bounce" the link state one or more
 times while a link is changing state.  This occurs most commonly while
 the switch is initializing.  Again, an appropriate updelay value may
-help, but note that if all links are down, then updelay is ignored
-when any link becomes active (the slave closest to completing its
-updelay is chosen).
+help.
 
 	Note that when a bonding interface has no active links, the
-driver will immediately reuse the first link that goes up, even if
-updelay parameter was specified.  If there are slave interfaces
-waiting for the updelay timeout to expire, the interface that first
-went into that state will be immediately reused.  This reduces down
-time of the network if the value of updelay has been overestimated.
+driver will immediately reuse the first link that goes up, even if the
+updelay parameter has been specified (the updelay is ignored in this
+case).  If there are slave interfaces waiting for the updelay timeout
+to expire, the interface that first went into that state will be
+immediately reused.  This reduces down time of the network if the
+value of updelay has been overestimated, and since this occurs only in
+cases with no connectivity, there is no additional penalty for
+ignoring the updelay.
 
 	In addition to the concerns about switch timings, if your
 switches take a long time to go into backup mode, it may be desirable
 to not activate a backup interface immediately after a link goes down.
 Failover may be delayed via the downdelay bonding module option.
 
-13. Hardware Specific Considerations
+14.2 Duplicated Incoming Packets
+--------------------------------
+
+	It is not uncommon to observe a short burst of duplicated
+traffic when the bonding device is first used, or after it has been
+idle for some period of time.  This is most easily observed by issuing
+a "ping" to some other host on the network, and noticing that the
+output from ping flags duplicates (typically one per slave).
+
+	For example, on a bond in active-backup mode with five slaves
+all connected to one switch, the output may appear as follows:
+
+# ping -n 10.0.4.2
+PING 10.0.4.2 (10.0.4.2) from 10.0.3.10 : 56(84) bytes of data.
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.7 ms
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=2 ttl=64 time=0.216 ms
+64 bytes from 10.0.4.2: icmp_seq=3 ttl=64 time=0.267 ms
+64 bytes from 10.0.4.2: icmp_seq=4 ttl=64 time=0.222 ms
+
+	This is not due to an error in the bonding driver, rather, it
+is a side effect of how many switches update their MAC forwarding
+tables.  Initially, the switch does not associate the MAC address in
+the packet with a particular switch port, and so it may send the
+traffic to all ports until its MAC forwarding table is updated.  Since
+the interfaces attached to the bond may occupy multiple ports on a
+single switch, when the switch (temporarily) floods the traffic to all
+ports, the bond device receives multiple copies of the same packet
+(one per slave device).
+
+	The duplicated packet behavior is switch dependent, some
+switches exhibit this, and some do not.  On switches that display this
+behavior, it can be induced by clearing the MAC forwarding table (on
+most Cisco switches, the privileged command "clear mac address-table
+dynamic" will accomplish this).
+
+15. Hardware Specific Considerations
 ====================================
 
 	This section contains additional information for configuring
 bonding on specific hardware platforms, or for interfacing bonding
 with particular switches or other devices.
 
-13.1 IBM BladeCenter
+15.1 IBM BladeCenter
 --------------------
 
 	This applies to the JS20 and similar systems.
@@ -1407,12 +1773,12 @@
 --------------------------------
 
 	All JS20s come with two Broadcom Gigabit Ethernet ports
-integrated on the planar.  In the BladeCenter chassis, the eth0 port
-of all JS20 blades is hard wired to I/O Module #1; similarly, all eth1
-ports are wired to I/O Module #2.  An add-on Broadcom daughter card
-can be installed on a JS20 to provide two more Gigabit Ethernet ports.
-These ports, eth2 and eth3, are wired to I/O Modules 3 and 4,
-respectively.
+integrated on the planar (that's "motherboard" in IBM-speak).  In the
+BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
+I/O Module #1; similarly, all eth1 ports are wired to I/O Module #2.
+An add-on Broadcom daughter card can be installed on a JS20 to provide
+two more Gigabit Ethernet ports.  These ports, eth2 and eth3, are
+wired to I/O Modules 3 and 4, respectively.
 
 	Each I/O Module may contain either a switch or a passthrough
 module (which allows ports to be directly connected to an external
@@ -1432,29 +1798,30 @@
 of ways, this discussion will be confined to describing basic
 configurations.
 
-	Normally, Ethernet Switch Modules (ESM) are used in I/O
+	Normally, Ethernet Switch Modules (ESMs) are used in I/O
 modules 1 and 2.  In this configuration, the eth0 and eth1 ports of a
 JS20 will be connected to different internal switches (in the
 respective I/O modules).
 
-	An optical passthru module (OPM) connects the I/O module
-directly to an external switch.  By using OPMs in I/O module #1 and
-#2, the eth0 and eth1 interfaces of a JS20 can be redirected to the
-outside world and connected to a common external switch.
-
-	Depending upon the mix of ESM and OPM modules, the network
-will appear to bonding as either a single switch topology (all OPM
-modules) or as a multiple switch topology (one or more ESM modules,
-zero or more OPM modules).  It is also possible to connect ESM modules
-together, resulting in a configuration much like the example in "High
-Availability in a multiple switch topology."
-
-Requirements for specifc modes
-------------------------------
-
-	The balance-rr mode requires the use of OPM modules for
-devices in the bond, all connected to an common external switch.  That
-switch must be configured for "etherchannel" or "trunking" on the
+	A passthrough module (OPM or CPM, optical or copper,
+passthrough module) connects the I/O module directly to an external
+switch.  By using PMs in I/O module #1 and #2, the eth0 and eth1
+interfaces of a JS20 can be redirected to the outside world and
+connected to a common external switch.
+
+	Depending upon the mix of ESMs and PMs, the network will
+appear to bonding as either a single switch topology (all PMs) or as a
+multiple switch topology (one or more ESMs, zero or more PMs).  It is
+also possible to connect ESMs together, resulting in a configuration
+much like the example in "High Availability in a Multiple Switch
+Topology," above.
+
+Requirements for specific modes
+-------------------------------
+
+	The balance-rr mode requires the use of passthrough modules
+for devices in the bond, all connected to an common external switch.
+That switch must be configured for "etherchannel" or "trunking" on the
 appropriate ports, as is usual for balance-rr.
 
 	The balance-alb and balance-tlb modes will function with
@@ -1484,17 +1851,18 @@
 Other concerns
 --------------
 
-	The Serial Over LAN link is established over the primary
+	The Serial Over LAN (SoL) link is established over the primary
 ethernet (eth0) only, therefore, any loss of link to eth0 will result
 in losing your SoL connection.  It will not fail over with other
-network traffic.
+network traffic, as the SoL system is beyond the control of the
+bonding driver.
 
 	It may be desirable to disable spanning tree on the switch
 (either the internal Ethernet Switch Module, or an external switch) to
-avoid fail-over delays issues when using bonding.
+avoid fail-over delay issues when using bonding.
 
 	
-14. Frequently Asked Questions
+16. Frequently Asked Questions
 ==============================
 
 1.  Is it SMP safe?
@@ -1505,8 +1873,8 @@
 2.  What type of cards will work with it?
 
 	Any Ethernet type cards (you can even mix cards - a Intel
-EtherExpress PRO/100 and a 3com 3c905b, for example).  They need not
-be of the same speed.
+EtherExpress PRO/100 and a 3com 3c905b, for example).  For most modes,
+devices need not be of the same speed.
 
 3.  How many bonding devices can I have?
 
@@ -1524,11 +1892,12 @@
 disabled.  The active-backup mode will fail over to a backup link, and
 other modes will ignore the failed link.  The link will continue to be
 monitored, and should it recover, it will rejoin the bond (in whatever
-manner is appropriate for the mode). See the section on High
-Availability for additional information.
+manner is appropriate for the mode). See the sections on High
+Availability and the documentation for each mode for additional
+information.
 	
 	Link monitoring can be enabled via either the miimon or
-arp_interval paramters (described in the module paramters section,
+arp_interval parameters (described in the module parameters section,
 above).  In general, miimon monitors the carrier state as sensed by
 the underlying network device, and the arp monitor (arp_interval)
 monitors connectivity to another host on the local network.
@@ -1536,7 +1905,7 @@
 	If no link monitoring is configured, the bonding driver will
 be unable to detect link failures, and will assume that all links are
 always available.  This will likely result in lost packets, and a
-resulting degredation of performance.  The precise performance loss
+resulting degradation of performance.  The precise performance loss
 depends upon the bonding mode and network configuration.
 
 6.  Can bonding be used for High Availability?
@@ -1550,12 +1919,12 @@
 	In the basic balance modes (balance-rr and balance-xor), it
 works with any system that supports etherchannel (also called
 trunking).  Most managed switches currently available have such
-support, and many unmananged switches as well.
+support, and many unmanaged switches as well.
 
 	The advanced balance modes (balance-tlb and balance-alb) do
 not have special switch requirements, but do need device drivers that
 support specific features (described in the appropriate section under
-module paramters, above).
+module parameters, above).
 
 	In 802.3ad mode, it works with with systems that support IEEE
 802.3ad Dynamic Link Aggregation.  Most managed and many unmanaged
@@ -1565,17 +1934,19 @@
 
 8.  Where does a bonding device get its MAC address from?
 
-	If not explicitly configured with ifconfig, the MAC address of
-the bonding device is taken from its first slave device. This MAC
-address is then passed to all following slaves and remains persistent
-(even if the the first slave is removed) until the bonding device is
-brought down or reconfigured.
+	If not explicitly configured (with ifconfig or ip link), the
+MAC address of the bonding device is taken from its first slave
+device.  This MAC address is then passed to all following slaves and
+remains persistent (even if the the first slave is removed) until the
+bonding device is brought down or reconfigured.
 
 	If you wish to change the MAC address, you can set it with
-ifconfig:
+ifconfig or ip link:
 
 # ifconfig bond0 hw ether 00:11:22:33:44:55
 
+# ip link set bond0 address 66:77:88:99:aa:bb
+
 	The MAC address can be also changed by bringing down/up the
 device and then changing its slaves (or their order):
 
@@ -1591,23 +1962,28 @@
 then restore the MAC addresses that the slaves had before they were
 enslaved.
 
-15. Resources and Links
+16. Resources and Links
 =======================
 
 The latest version of the bonding driver can be found in the latest
 version of the linux kernel, found on http://kernel.org
 
+The latest version of this document can be found in either the latest
+kernel source (named Documentation/networking/bonding.txt), or on the
+bonding sourceforge site:
+
+http://www.sourceforge.net/projects/bonding
+
 Discussions regarding the bonding driver take place primarily on the
 bonding-devel mailing list, hosted at sourceforge.net.  If you have
-questions or problems, post them to the list.
+questions or problems, post them to the list.  The list address is:
 
 bonding-devel@lists.sourceforge.net
 
-https://lists.sourceforge.net/lists/listinfo/bonding-devel
-
-There is also a project site on sourceforge.
+	The administrative interface (to subscribe or unsubscribe) can
+be found at:
 
-http://www.sourceforge.net/projects/bonding
+https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
 Donald Becker's Ethernet Drivers and diag programs may be found at :
  - http://www.scyld.com/network/
diff -urN linux-2.6.13-rc4/Documentation/stable_api_nonsense.txt linux-2.6.13-rc5/Documentation/stable_api_nonsense.txt
--- linux-2.6.13-rc4/Documentation/stable_api_nonsense.txt	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/Documentation/stable_api_nonsense.txt	2005-08-01 22:29:09.714550884 -0700
@@ -132,7 +132,7 @@
 their work on their own time, asking programmers to do extra work for no
 gain, for free, is not a possibility.
 
-Security issues are also a very important for Linux.  When a
+Security issues are also very important for Linux.  When a
 security issue is found, it is fixed in a very short amount of time.  A
 number of times this has caused internal kernel interfaces to be
 reworked to prevent the security problem from occurring.  When this
diff -urN linux-2.6.13-rc4/Documentation/stable_kernel_rules.txt linux-2.6.13-rc5/Documentation/stable_kernel_rules.txt
--- linux-2.6.13-rc4/Documentation/stable_kernel_rules.txt	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/Documentation/stable_kernel_rules.txt	2005-08-01 22:29:09.715550928 -0700
@@ -0,0 +1,58 @@
+Everything you ever wanted to know about Linux 2.6 -stable releases.
+
+Rules on what kind of patches are accepted, and what ones are not, into
+the "-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It can not bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+   problem..." type thing.)
+ - It must fix a problem that causes a build error (but not for things
+   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+   security issue, or some "oh, that's not good" issue.  In short,
+   something critical.
+ - No "theoretical race condition" issues, unless an explanation of how
+   the race can be exploited.
+ - It can not contain any "trivial" fixes in it (spelling changes,
+   whitespace cleanups, etc.)
+ - It must be accepted by the relevant subsystem maintainer.
+ - It must follow Documentation/SubmittingPatches rules.
+
+
+Procedure for submitting patches to the -stable tree:
+
+ - Send the patch, after verifying that it follows the above rules, to
+   stable@kernel.org.
+ - The sender will receive an ack when the patch has been accepted into
+   the queue, or a nak if the patch is rejected.  This response might
+   take a few days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review
+   by other developers.
+ - Security patches should not be sent to this alias, but instead to the
+   documented security@kernel.org.
+
+
+Review cycle:
+
+ - When the -stable maintainers decide for a review cycle, the patches
+   will be sent to the review committee, and the maintainer of the
+   affected area of the patch (unless the submitter is the maintainer of
+   the area) and CC: to the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ack or nak the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+   members object to the patch, bringing up issues that the maintainers
+   and members did not realize, the patch will be dropped from the
+   queue.
+ - At the end of the review cycle, the acked patches will be added to
+   the latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from
+   the security kernel team, and not go through the normal review cycle.
+   Contact the kernel security team for more details on this procedure.
+
+
+Review committe:
+
+ - This will be made up of a number of kernel developers who have
+   volunteered for this task, and a few that haven't.
+
diff -urN linux-2.6.13-rc4/Documentation/video4linux/CARDLIST.cx88 linux-2.6.13-rc5/Documentation/video4linux/CARDLIST.cx88
--- linux-2.6.13-rc4/Documentation/video4linux/CARDLIST.cx88	2005-08-01 22:29:02.715243255 -0700
+++ linux-2.6.13-rc5/Documentation/video4linux/CARDLIST.cx88	2005-08-01 22:29:09.718551060 -0700
@@ -29,3 +29,4 @@
 card=28 - DViCO FusionHDTV 3 Gold-T
 card=29 - ADS Tech Instant TV DVB-T PCI
 card=30 - TerraTec Cinergy 1400 DVB-T
+card=31 - DViCO FusionHDTV 5 Gold
diff -urN linux-2.6.13-rc4/Documentation/video4linux/CARDLIST.tuner linux-2.6.13-rc5/Documentation/video4linux/CARDLIST.tuner
--- linux-2.6.13-rc4/Documentation/video4linux/CARDLIST.tuner	2005-08-01 22:29:02.715243255 -0700
+++ linux-2.6.13-rc5/Documentation/video4linux/CARDLIST.tuner	2005-08-01 22:29:09.718551060 -0700
@@ -62,3 +62,5 @@
 tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
 tuner=62 - Philips TEA5767HN FM Radio
 tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
+tuner=64 - LG TDVS-H062F/TUA6034
+tuner=65 - Ymec TVF66T5-B/DFF
diff -urN linux-2.6.13-rc4/Documentation/x86_64/boot-options.txt linux-2.6.13-rc5/Documentation/x86_64/boot-options.txt
--- linux-2.6.13-rc4/Documentation/x86_64/boot-options.txt	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/Documentation/x86_64/boot-options.txt	2005-08-01 22:29:09.721551192 -0700
@@ -47,7 +47,7 @@
   notsc
   Don't use the CPU time stamp counter to read the wall time.
   This can be used to work around timing problems on multiprocessor systems
-  with not properly synchronized CPUs. Only useful with a SMP kernel
+  with not properly synchronized CPUs.
 
   report_lost_ticks
   Report when timer interrupts are lost because some code turned off
@@ -74,6 +74,9 @@
   event. This will make the CPUs eat a lot more power, but may be useful
   to get slightly better performance in multiprocessor benchmarks. It also
   makes some profiling using performance counters more accurate.
+  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+  CPUs) this option has no performance advantage over the normal idle loop.
+  It may also interact badly with hyperthreading.
 
 Rebooting
 
@@ -178,6 +181,5 @@
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones
-  				 for the CPU. This may be useful on asymmetric MP systems
-				 where some CPU have less capabilities than the others.
-
+		 for the CPU. This may be useful on asymmetric MP systems
+		 where some CPU have less capabilities than the others.
diff -urN linux-2.6.13-rc4/MAINTAINERS linux-2.6.13-rc5/MAINTAINERS
--- linux-2.6.13-rc4/MAINTAINERS	2005-08-01 22:29:02.719243431 -0700
+++ linux-2.6.13-rc5/MAINTAINERS	2005-08-01 22:29:09.722551235 -0700
@@ -1521,6 +1521,12 @@
 M:	zab@zabbo.net
 S:	Odd Fixes
 
+MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
+P: Michael Kerrisk
+M: mtk-manpages@gmx.net
+W: ftp://ftp.kernel.org/pub/linux/docs/manpages
+S: Maintained
+
 MARVELL MV64340 ETHERNET DRIVER
 P:	Manish Lachwani
 M:	Manish_Lachwani@pmc-sierra.com
diff -urN linux-2.6.13-rc4/Makefile linux-2.6.13-rc5/Makefile
--- linux-2.6.13-rc4/Makefile	2005-08-01 22:29:02.720243475 -0700
+++ linux-2.6.13-rc5/Makefile	2005-08-01 22:29:09.723551279 -0700
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
diff -urN linux-2.6.13-rc4/arch/arm/kernel/smp.c linux-2.6.13-rc5/arch/arm/kernel/smp.c
--- linux-2.6.13-rc4/arch/arm/kernel/smp.c	2005-08-01 22:29:02.744244530 -0700
+++ linux-2.6.13-rc5/arch/arm/kernel/smp.c	2005-08-01 22:29:09.748552378 -0700
@@ -176,6 +176,7 @@
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 
diff -urN linux-2.6.13-rc4/arch/arm/lib/bitops.h linux-2.6.13-rc5/arch/arm/lib/bitops.h
--- linux-2.6.13-rc4/arch/arm/lib/bitops.h	2005-08-01 22:29:02.746244617 -0700
+++ linux-2.6.13-rc5/arch/arm/lib/bitops.h	2005-08-01 22:29:09.750552466 -0700
@@ -7,7 +7,7 @@
 1:	ldrexb	r2, [r1]
 	\instr	r2, r2, r3
 	strexb	r0, r2, [r1]
-	cmpne	r0, #0
+	cmp	r0, #0
 	bne	1b
 	mov	pc, lr
 	.endm
diff -urN linux-2.6.13-rc4/arch/arm/mach-integrator/platsmp.c linux-2.6.13-rc5/arch/arm/mach-integrator/platsmp.c
--- linux-2.6.13-rc4/arch/arm/mach-integrator/platsmp.c	2005-08-01 22:29:02.760245233 -0700
+++ linux-2.6.13-rc5/arch/arm/mach-integrator/platsmp.c	2005-08-01 22:29:09.764553082 -0700
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -80,6 +81,7 @@
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX
diff -urN linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
--- linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c	2005-08-01 22:29:09.956561521 -0700
@@ -442,6 +442,13 @@
 			(u32) data->acpi_data.states[i].transition_latency);
 
 	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+	
+	/*
+	 * the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers.
+	 */
+	data->resume = 1;
+	
 	return (result);
 
  err_freqfree:
diff -urN linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/powernow-k8.c linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
--- linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/powernow-k8.c	2005-08-01 22:29:02.964254199 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.c	2005-08-01 22:29:09.957561564 -0700
@@ -1,5 +1,5 @@
 /*
- *   (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *   (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.40.2"
+#define VERSION "version 1.50.3"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -231,7 +231,7 @@
 /*
  * Reduce the vid by the max of step or reqvid.
  * Decreasing vid codes represent increasing voltages:
- * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
  */
 static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
 {
@@ -466,7 +466,7 @@
 	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
 	if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
 	    ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
-	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
 		printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
 		goto out;
 	}
@@ -695,6 +695,7 @@
 
 	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
 	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
 	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
 	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
 	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
@@ -734,8 +735,16 @@
 	}
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
-		u32 fid = data->acpi_data.states[i].control & FID_MASK;
-		u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		u32 fid;
+		u32 vid;
+
+		if (data->exttype) {
+			fid = data->acpi_data.states[i].status & FID_MASK;
+			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK;
+		} else {
+			fid = data->acpi_data.states[i].control & FID_MASK;
+			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
@@ -752,7 +761,7 @@
 		}
 
 		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
-		if (vid == 0x1f) {
+		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
 			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 			continue;
@@ -929,15 +938,6 @@
 
 	down(&fidvid_sem);
 
-	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
-		/* make sure the sibling is initialized */
-		if (!powernow_data[i]) {
-                        ret = 0;
-                        up(&fidvid_sem);
-                        goto err_out;
-                }
-	}
-
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	if (transition_frequency(data, newstate)) {
@@ -977,7 +977,7 @@
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = CPU_MASK_ALL;
-	int rc;
+	int rc, i;
 
 	if (!check_supported_cpu(pol->cpu))
 		return -ENODEV;
@@ -1063,7 +1063,9 @@
 	printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 	       data->currfid, data->currvid);
 
-	powernow_data[pol->cpu] = data;
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		powernow_data[i] = data;
+	}
 
 	return 0;
 
diff -urN linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/powernow-k8.h linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
--- linux-2.6.13-rc4/arch/i386/kernel/cpu/cpufreq/powernow-k8.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.h	2005-08-01 22:29:09.958561608 -0700
@@ -1,5 +1,5 @@
 /*
- *  (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -19,6 +19,7 @@
 	u32 vidmvs;  /* usable value calculated from mvs */
 	u32 vstable; /* voltage stabilization time, units 20 us */
 	u32 plllock; /* pll lock time, units 1 us */
+        u32 exttype; /* extended interface = 1 */
 
 	/* keep track of the current fid / vid */
 	u32 currvid, currfid;
@@ -41,7 +42,7 @@
 #define CPUID_XFAM			0x0ff00000	/* extended family */
 #define CPUID_XFAM_K8			0
 #define CPUID_XMOD			0x000f0000	/* extended model */
-#define CPUID_XMOD_REV_E		0x00020000
+#define CPUID_XMOD_REV_F		0x00040000
 #define CPUID_USE_XFAM_XMOD		0x00000f00
 #define CPUID_GET_MAX_CAPABILITIES	0x80000000
 #define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
@@ -57,25 +58,26 @@
 
 /* Field definitions within the FID VID Low Control MSR : */
 #define MSR_C_LO_INIT_FID_VID     0x00010000
-#define MSR_C_LO_NEW_VID          0x00001f00
-#define MSR_C_LO_NEW_FID          0x0000002f
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
 #define MSR_C_LO_VID_SHIFT        8
 
 /* Field definitions within the FID VID High Control MSR : */
-#define MSR_C_HI_STP_GNT_TO       0x000fffff
+#define MSR_C_HI_STP_GNT_TO 	  0x000fffff
 
 /* Field definitions within the FID VID Low Status MSR : */
-#define MSR_S_LO_CHANGE_PENDING   0x80000000	/* cleared when completed */
-#define MSR_S_LO_MAX_RAMP_VID     0x1f000000
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
 #define MSR_S_LO_MAX_FID          0x003f0000
 #define MSR_S_LO_START_FID        0x00003f00
 #define MSR_S_LO_CURRENT_FID      0x0000003f
 
 /* Field definitions within the FID VID High Status MSR : */
-#define MSR_S_HI_MAX_WORKING_VID  0x001f0000
-#define MSR_S_HI_START_VID        0x00001f00
-#define MSR_S_HI_CURRENT_VID      0x0000001f
-#define MSR_C_HI_STP_GNT_BENIGN   0x00000001
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
 
 /*
  * There are restrictions frequencies have to follow:
@@ -99,13 +101,15 @@
 #define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
 
 #define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
-#define LEAST_VID 0x1e	/* Lowest (numerically highest) useful vid value */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
 
 #define MIN_FREQ 800	/* Min and max freqs, per spec */
 #define MAX_FREQ 5000
 
 #define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
-#define INVALID_VID_MASK 0xffffffe0  /* not a valid vid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
 
 #define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
 
@@ -121,12 +125,14 @@
                                                                                                     
 #define IRT_SHIFT      30
 #define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
 #define PLL_L_SHIFT    20
 #define MVS_SHIFT      18
 #define VST_SHIFT      11
 #define VID_SHIFT       6
 #define IRT_MASK        3
 #define RVO_MASK        3
+#define EXT_TYPE_MASK   1
 #define PLL_L_MASK   0x7f
 #define MVS_MASK        3
 #define VST_MASK     0x7f
diff -urN linux-2.6.13-rc4/arch/i386/kernel/cpu/intel_cacheinfo.c linux-2.6.13-rc5/arch/i386/kernel/cpu/intel_cacheinfo.c
--- linux-2.6.13-rc4/arch/i386/kernel/cpu/intel_cacheinfo.c	2005-08-01 22:29:02.965254243 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/cpu/intel_cacheinfo.c	2005-08-01 22:29:09.959561652 -0700
@@ -128,7 +128,7 @@
 	cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
 	cache_eax.full = eax;
 	if (cache_eax.split.type == CACHE_TYPE_NULL)
-		return -1;
+		return -EIO; /* better error ? */
 
 	this_leaf->eax.full = eax;
 	this_leaf->ebx.full = ebx;
@@ -334,6 +334,7 @@
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
 	int 			retval;
+	cpumask_t		oldmask;
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -345,19 +346,26 @@
 	memset(cpuid4_info[cpu], 0,
 	    sizeof(struct _cpuid4_info) * num_cache_leaves);
 
+	oldmask = current->cpus_allowed;
+	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (retval)
+		goto out;
+
 	/* Do cpuid and store the results */
+	retval = 0;
 	for (j = 0; j < num_cache_leaves; j++) {
 		this_leaf = CPUID4_INFO_IDX(cpu, j);
 		retval = cpuid4_cache_lookup(j, this_leaf);
 		if (unlikely(retval < 0))
-			goto err_out;
+			break;
 		cache_shared_cpu_map_setup(cpu, j);
 	}
-	return 0;
+	set_cpus_allowed(current, oldmask);
 
-err_out:
-	free_cache_attributes(cpu);
-	return -ENOMEM;
+out:
+	if (retval)
+		free_cache_attributes(cpu);
+	return retval;
 }
 
 #ifdef CONFIG_SYSFS
diff -urN linux-2.6.13-rc4/arch/i386/kernel/cpu/transmeta.c linux-2.6.13-rc5/arch/i386/kernel/cpu/transmeta.c
--- linux-2.6.13-rc4/arch/i386/kernel/cpu/transmeta.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/cpu/transmeta.c	2005-08-01 22:29:09.962561784 -0700
@@ -76,6 +76,12 @@
 #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
         if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
 		c->x86 = 6;
+
+#ifdef CONFIG_SYSCTL
+	/* randomize_va_space slows us down enormously;
+	   it probably triggers retranslation of x86->native bytecode */
+	randomize_va_space = 0;
+#endif
 }
 
 static void transmeta_identify(struct cpuinfo_x86 * c)
diff -urN linux-2.6.13-rc4/arch/i386/kernel/machine_kexec.c linux-2.6.13-rc5/arch/i386/kernel/machine_kexec.c
--- linux-2.6.13-rc4/arch/i386/kernel/machine_kexec.c	2005-08-01 22:29:02.975254683 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/machine_kexec.c	2005-08-01 22:29:09.969562092 -0700
@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
+#include <asm/desc.h>
 
 static inline unsigned long read_cr3(void)
 {
@@ -90,33 +91,32 @@
 }
 #endif
 
-
 static void set_idt(void *newidt, __u16 limit)
 {
-	unsigned char curidt[6];
+	struct Xgt_desc_struct curidt;
 
 	/* ia32 supports unaliged loads & stores */
-	(*(__u16 *)(curidt)) = limit;
-	(*(__u32 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtl %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, __u16 limit)
 {
-	unsigned char curgdt[6];
+	struct Xgt_desc_struct curgdt;
 
 	/* ia32 supports unaligned loads & stores */
-	(*(__u16 *)(curgdt)) = limit;
-	(*(__u32 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtl %0\n"
+		: : "m" (curgdt)
 		);
 };
 
diff -urN linux-2.6.13-rc4/arch/i386/kernel/mpparse.c linux-2.6.13-rc5/arch/i386/kernel/mpparse.c
--- linux-2.6.13-rc4/arch/i386/kernel/mpparse.c	2005-08-01 22:29:02.976254727 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/mpparse.c	2005-08-01 22:29:09.970562136 -0700
@@ -1116,7 +1116,15 @@
 		 */
 		int irq = gsi;
 		if (gsi < MAX_GSI_NUM) {
-			gsi = pci_irq++;
+			if (gsi > 15)
+				gsi = pci_irq++;
+#ifdef CONFIG_ACPI_BUS
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_fadt.sci_int)
+				gsi = pci_irq++;
+#endif
 			gsi_to_irq[irq] = gsi;
 		} else {
 			printk(KERN_ERR "GSI %u is too high\n", gsi);
diff -urN linux-2.6.13-rc4/arch/i386/kernel/numaq.c linux-2.6.13-rc5/arch/i386/kernel/numaq.c
--- linux-2.6.13-rc4/arch/i386/kernel/numaq.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/numaq.c	2005-08-01 22:29:09.971562180 -0700
@@ -31,6 +31,7 @@
 #include <linux/nodemask.h>
 #include <asm/numaq.h>
 #include <asm/topology.h>
+#include <asm/processor.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -77,3 +78,11 @@
 	smp_dump_qct();
 	return 1;
 }
+
+static int __init numaq_dsc_disable(void)
+{
+	printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+	tsc_disable = 1;
+	return 0;
+}
+core_initcall(numaq_dsc_disable);
diff -urN linux-2.6.13-rc4/arch/i386/kernel/syscall_table.S linux-2.6.13-rc5/arch/i386/kernel/syscall_table.S
--- linux-2.6.13-rc4/arch/i386/kernel/syscall_table.S	2005-08-01 22:29:02.984255078 -0700
+++ linux-2.6.13-rc5/arch/i386/kernel/syscall_table.S	2005-08-01 22:29:09.977562444 -0700
@@ -251,7 +251,7 @@
 	.long sys_io_submit
 	.long sys_io_cancel
 	.long sys_fadvise64	/* 250 */
-	.long sys_set_zone_reclaim
+	.long sys_ni_syscall
 	.long sys_exit_group
 	.long sys_lookup_dcookie
 	.long sys_epoll_create
diff -urN linux-2.6.13-rc4/arch/i386/mm/discontig.c linux-2.6.13-rc5/arch/i386/mm/discontig.c
--- linux-2.6.13-rc4/arch/i386/mm/discontig.c	2005-08-01 22:29:02.993255474 -0700
+++ linux-2.6.13-rc5/arch/i386/mm/discontig.c	2005-08-01 22:29:09.986562839 -0700
@@ -243,6 +243,14 @@
 		/* now the roundup is correct, convert to PAGE_SIZE pages */
 		size = size * PTRS_PER_PTE;
 
+		if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
+			/*
+			 * Adjust size if node_end_pfn is not on a proper
+			 * pmd boundary. remap_numa_kva will barf otherwise.
+			 */
+			size +=  node_end_pfn[nid] & (PTRS_PER_PTE-1);
+		}
+
 		/*
 		 * Validate the region we are allocating only contains valid
 		 * pages.
diff -urN linux-2.6.13-rc4/arch/i386/pci/acpi.c linux-2.6.13-rc5/arch/i386/pci/acpi.c
--- linux-2.6.13-rc4/arch/i386/pci/acpi.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/i386/pci/acpi.c	2005-08-01 22:29:09.989562971 -0700
@@ -30,6 +30,7 @@
 	acpi_irq_penalty_init();
 	pcibios_scanned++;
 	pcibios_enable_irq = acpi_pci_irq_enable;
+	pcibios_disable_irq = acpi_pci_irq_disable;
 
 	if (pci_routeirq) {
 		/*
diff -urN linux-2.6.13-rc4/arch/i386/pci/common.c linux-2.6.13-rc5/arch/i386/pci/common.c
--- linux-2.6.13-rc4/arch/i386/pci/common.c	2005-08-01 22:29:02.996255606 -0700
+++ linux-2.6.13-rc5/arch/i386/pci/common.c	2005-08-01 22:29:09.989562971 -0700
@@ -254,3 +254,9 @@
 
 	return pcibios_enable_irq(dev);
 }
+
+void pcibios_disable_device (struct pci_dev *dev)
+{
+	if (pcibios_disable_irq)
+		pcibios_disable_irq(dev);
+}
diff -urN linux-2.6.13-rc4/arch/i386/pci/irq.c linux-2.6.13-rc5/arch/i386/pci/irq.c
--- linux-2.6.13-rc4/arch/i386/pci/irq.c	2005-08-01 22:29:02.997255650 -0700
+++ linux-2.6.13-rc5/arch/i386/pci/irq.c	2005-08-01 22:29:09.990563015 -0700
@@ -56,6 +56,7 @@
 };
 
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
+void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
 
 /*
  *  Check passed address for the PCI IRQ Routing Table signature
diff -urN linux-2.6.13-rc4/arch/i386/pci/pci.h linux-2.6.13-rc5/arch/i386/pci/pci.h
--- linux-2.6.13-rc4/arch/i386/pci/pci.h	2005-08-01 22:29:02.998255694 -0700
+++ linux-2.6.13-rc5/arch/i386/pci/pci.h	2005-08-01 22:29:09.992563103 -0700
@@ -73,3 +73,4 @@
 extern spinlock_t pci_config_lock;
 
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+extern void (*pcibios_disable_irq)(struct pci_dev *dev);
diff -urN linux-2.6.13-rc4/arch/ia64/kernel/entry.S linux-2.6.13-rc5/arch/ia64/kernel/entry.S
--- linux-2.6.13-rc4/arch/ia64/kernel/entry.S	2005-08-01 22:29:03.010256221 -0700
+++ linux-2.6.13-rc5/arch/ia64/kernel/entry.S	2005-08-01 22:29:10.003563586 -0700
@@ -1573,7 +1573,7 @@
 	data8 sys_keyctl
 	data8 sys_ioprio_set
 	data8 sys_ioprio_get			// 1275
-	data8 sys_set_zone_reclaim
+	data8 sys_ni_syscall
 	data8 sys_inotify_init
 	data8 sys_inotify_add_watch
 	data8 sys_inotify_rm_watch
diff -urN linux-2.6.13-rc4/arch/m32r/kernel/time.c linux-2.6.13-rc5/arch/m32r/kernel/time.c
--- linux-2.6.13-rc4/arch/m32r/kernel/time.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/m32r/kernel/time.c	2005-08-01 22:29:10.047565520 -0700
@@ -205,8 +205,7 @@
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-static inline void
-do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING, regs);
@@ -221,6 +220,7 @@
 	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
+	write_seqlock(&xtime_lock);
 	if ((time_status & STA_UNSYNC) == 0
 		&& xtime.tv_sec > last_rtc_update + 660
 		&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
@@ -231,6 +231,7 @@
 		else	/* do it again in 60 s */
 			last_rtc_update = xtime.tv_sec - 600;
 	}
+	write_sequnlock(&xtime_lock);
 	/* As we return to user mode fire off the other CPU schedulers..
 	   this is basically because we don't yet share IRQ's around.
 	   This message is rigged to be safe on the 386 - basically it's
@@ -238,14 +239,8 @@
 
 #ifdef CONFIG_SMP
 	smp_local_timer_interrupt(regs);
+	smp_send_timer();
 #endif
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	write_seqlock(&xtime_lock);
-	do_timer_interrupt(irq, NULL, regs);
-	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
 }
diff -urN linux-2.6.13-rc4/arch/ppc/Kconfig linux-2.6.13-rc5/arch/ppc/Kconfig
--- linux-2.6.13-rc4/arch/ppc/Kconfig	2005-08-01 22:29:03.078259210 -0700
+++ linux-2.6.13-rc5/arch/ppc/Kconfig	2005-08-01 22:29:10.067566399 -0700
@@ -558,6 +558,7 @@
 
 config APUS
 	bool "Amiga-APUS"
+	depends on BROKEN
 	help
 	  Select APUS if configuring for a PowerUP Amiga.
 	  More information is available at:
@@ -647,6 +648,7 @@
 
 config GEMINI
 	bool "Synergy-Gemini"
+	depends on BROKEN
 	help
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
diff -urN linux-2.6.13-rc4/arch/ppc/boot/simple/Makefile linux-2.6.13-rc5/arch/ppc/boot/simple/Makefile
--- linux-2.6.13-rc4/arch/ppc/boot/simple/Makefile	2005-08-01 22:29:03.080259298 -0700
+++ linux-2.6.13-rc5/arch/ppc/boot/simple/Makefile	2005-08-01 22:29:10.069566487 -0700
@@ -61,6 +61,12 @@
          end-$(CONFIG_EMBEDDEDBOOT)	:= embedded
         misc-$(CONFIG_EMBEDDEDBOOT)	:= misc-embedded.o
 
+      zimage-$(CONFIG_BAMBOO)		:= zImage-TREE
+zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
+         end-$(CONFIG_BAMBOO)		:= bamboo
+  entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
+     extra.o-$(CONFIG_BAMBOO)		:= pibs.o
+
       zimage-$(CONFIG_EBONY)		:= zImage-TREE
 zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
          end-$(CONFIG_EBONY)		:= ebony
diff -urN linux-2.6.13-rc4/arch/ppc/boot/simple/pibs.c linux-2.6.13-rc5/arch/ppc/boot/simple/pibs.c
--- linux-2.6.13-rc4/arch/ppc/boot/simple/pibs.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/boot/simple/pibs.c	2005-08-01 22:29:10.070566531 -0700
@@ -91,9 +91,11 @@
 
 	mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
 	memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#ifdef CONFIG_440GX
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
 	memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
+#endif
+#ifdef CONFIG_440GX
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
 	memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
diff -urN linux-2.6.13-rc4/arch/ppc/configs/bamboo_defconfig linux-2.6.13-rc5/arch/ppc/configs/bamboo_defconfig
--- linux-2.6.13-rc4/arch/ppc/configs/bamboo_defconfig	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/ppc/configs/bamboo_defconfig	2005-08-01 22:29:10.073566663 -0700
@@ -0,0 +1,943 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Tue Jun 28 15:24:25 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+
+#
+# IBM 4xx options
+#
+CONFIG_BAMBOO=y
+# CONFIG_EBONY is not set
+# CONFIG_LUAN is not set
+# CONFIG_OCOTEA is not set
+CONFIG_440EP=y
+CONFIG_440=y
+CONFIG_IBM440EP_ERR42=y
+CONFIG_IBM_OCP=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+# CONFIG_PM is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_IBM_EMAC_ERRMSG is not set
+CONFIG_IBM_EMAC_RXB=64
+CONFIG_IBM_EMAC_TXB=8
+CONFIG_IBM_EMAC_FGAP=8
+CONFIG_IBM_EMAC_SKBRES=0
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=y
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+CONFIG_PPC_OCP=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff -urN linux-2.6.13-rc4/arch/ppc/kernel/cputable.c linux-2.6.13-rc5/arch/ppc/kernel/cputable.c
--- linux-2.6.13-rc4/arch/ppc/kernel/cputable.c	2005-08-01 22:29:03.092259825 -0700
+++ linux-2.6.13-rc5/arch/ppc/kernel/cputable.c	2005-08-01 22:29:10.083567103 -0700
@@ -852,6 +852,26 @@
 
 #endif /* CONFIG_40x */
 #ifdef CONFIG_44x
+	{
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x40000850,
+		.cpu_name		= "440EP Rev. A",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x400008d3,
+		.cpu_name		= "440EP Rev. B",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
 	{ 	/* 440GP Rev. B */
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000440,
diff -urN linux-2.6.13-rc4/arch/ppc/kernel/entry.S linux-2.6.13-rc5/arch/ppc/kernel/entry.S
--- linux-2.6.13-rc4/arch/ppc/kernel/entry.S	2005-08-01 22:29:03.093259869 -0700
+++ linux-2.6.13-rc5/arch/ppc/kernel/entry.S	2005-08-01 22:29:10.083567103 -0700
@@ -215,6 +215,7 @@
 	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
 	mtlr	r10
 	addi	r9,r1,STACK_FRAME_OVERHEAD
+	PPC440EP_ERR42
 	blrl			/* Call handler */
 	.globl	ret_from_syscall
 ret_from_syscall:
diff -urN linux-2.6.13-rc4/arch/ppc/kernel/head_44x.S linux-2.6.13-rc5/arch/ppc/kernel/head_44x.S
--- linux-2.6.13-rc4/arch/ppc/kernel/head_44x.S	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/kernel/head_44x.S	2005-08-01 22:29:10.084567147 -0700
@@ -179,24 +179,26 @@
 4:
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	/*
-	 * Add temporary UART mapping for early debug.  This
-	 * mapping must be identical to that used by the early
-	 * bootloader code since the same asm/serial.h parameters
-	 * are used for polled operation.
+	 * Add temporary UART mapping for early debug.
+	 * We can map UART registers wherever we want as long as they don't
+	 * interfere with other system mappings (e.g. with pinned entries).
+	 * For an example of how we handle this - see ocotea.h.       --ebs
 	 */
  	/* pageid fields */
 	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
 
 	/* xlat fields */
 	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
+#ifndef CONFIG_440EP
 	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#endif
 
 	/* attrib fields */
 	li	r5,0
 	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
 
-        li      r0,1                    /* TLB slot 1 */
+        li      r0,0                    /* TLB slot 0 */
 
 	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
 	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
@@ -228,6 +230,16 @@
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
 	mtspr	SPRN_IVPR,r4
 
+#ifdef CONFIG_440EP
+	/* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+	mfspr	r2,SPRN_CCR0
+	lis	r3,0xffef
+	ori	r3,r3,0xffff
+	and	r2,r2,r3
+	mtspr	SPRN_CCR0,r2
+	isync
+#endif
+
 	/*
 	 * This is where the main kernel code starts.
 	 */
diff -urN linux-2.6.13-rc4/arch/ppc/kernel/misc.S linux-2.6.13-rc5/arch/ppc/kernel/misc.S
--- linux-2.6.13-rc4/arch/ppc/kernel/misc.S	2005-08-01 22:29:03.097260045 -0700
+++ linux-2.6.13-rc5/arch/ppc/kernel/misc.S	2005-08-01 22:29:10.087567278 -0700
@@ -1145,6 +1145,7 @@
 	stwu	r0,-16(r1)
 	mtlr	r30		/* fn addr in lr */
 	mr	r3,r31		/* load arg and call fn */
+	PPC440EP_ERR42
 	blrl
 	li	r0,__NR_exit	/* exit if function returns */
 	li	r3,0
@@ -1451,3 +1452,6 @@
 	.long sys_waitid
 	.long sys_ioprio_set
 	.long sys_ioprio_get
+	.long sys_inotify_init		/* 275 */
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/Kconfig linux-2.6.13-rc5/arch/ppc/platforms/4xx/Kconfig
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/Kconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/Kconfig	2005-08-01 22:29:10.094567586 -0700
@@ -68,6 +68,11 @@
 	depends on 44x
 	default EBONY
 
+config BAMBOO
+	bool "Bamboo"
+	help
+	  This option enables support for the IBM PPC440EP evaluation board.
+
 config EBONY
 	bool "Ebony"
 	help
@@ -98,6 +103,12 @@
 	depends on ASH
 	default y
 
+config 440EP
+	bool
+	depends on BAMBOO
+	select PPC_FPU
+	default y
+
 config 440GP
 	bool
 	depends on EBONY
@@ -115,7 +126,7 @@
 
 config 440
 	bool
-	depends on 440GP || 440SP
+	depends on 440GP || 440SP || 440EP
 	default y
 
 config 440A
@@ -123,6 +134,11 @@
 	depends on 440GX
 	default y
 
+config IBM440EP_ERR42
+	bool
+	depends on 440EP
+	default y
+
 # All 405-based cores up until the 405GPR and 405EP have this errata.
 config IBM405_ERR77
 	bool
@@ -142,7 +158,7 @@
 
 config IBM_OCP
 	bool
-	depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/Makefile linux-2.6.13-rc5/arch/ppc/platforms/4xx/Makefile
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/Makefile	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/Makefile	2005-08-01 22:29:10.094567586 -0700
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 4xx linux kernel.
 
 obj-$(CONFIG_ASH)		+= ash.o
+obj-$(CONFIG_BAMBOO)		+= bamboo.o
 obj-$(CONFIG_CPCI405)		+= cpci405.o
 obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
@@ -19,6 +20,7 @@
 obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
 obj-$(CONFIG_NP405H)		+= ibmnp405h.o
 obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
+obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/bamboo.c linux-2.6.13-rc5/arch/ppc/platforms/4xx/bamboo.c
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/bamboo.c	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/bamboo.c	2005-08-01 22:29:10.095567630 -0700
@@ -0,0 +1,427 @@
+/*
+ * arch/ppc/platforms/4xx/bamboo.c
+ *
+ * Bamboo board specific routines
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/ethtool.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the  standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+/*
+ * Bamboo external IRQ triggering/polarity settings
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
+	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
+};
+
+static void __init
+bamboo_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = BAMBOO_TMRCLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+
+}
+
+static int
+bamboo_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: IBM\n");
+	seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
+
+	return 0;
+}
+
+static inline int
+bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	   A   B   C   D
+	 */
+	{
+		{ 28, 28, 28, 28 },	/* IDSEL 1 - PCI Slot 0 */
+		{ 27, 27, 27, 27 },	/* IDSEL 2 - PCI Slot 1 */
+		{ 26, 26, 26, 26 },	/* IDSEL 3 - PCI Slot 2 */
+		{ 25, 25, 25, 25 },	/* IDSEL 4 - PCI Slot 3 */
+	};
+
+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init bamboo_set_emacdata(void)
+{
+	unsigned char * selection1_base;
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+	u8 selection1_val;
+	int mode;
+
+	selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
+	selection1_val = readb(selection1_base);
+	iounmap((void *) selection1_base);
+	if (BAMBOO_SEL_MII(selection1_val))
+		mode = PHY_MODE_MII;
+	else if (BAMBOO_SEL_RMII(selection1_val))
+		mode = PHY_MODE_RMII;
+	else
+		mode = PHY_MODE_SMII;
+
+	/* Set mac_addr and phy mode for each EMAC */
+
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+	emacdata->phy_mode = mode;
+
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
+	emacdata = def->additions;
+	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+	emacdata->phy_mode = mode;
+}
+
+static int
+bamboo_exclude_device(unsigned char bus, unsigned char devfn)
+{
+	return (bus == 0 && devfn == 0);
+}
+
+#define PCI_READW(offset) \
+        (readw((void *)((u32)pci_reg_base+offset)))
+
+#define PCI_WRITEW(value, offset) \
+	(writew(value, (void *)((u32)pci_reg_base+offset)))
+
+#define PCI_WRITEL(value, offset) \
+	(writel(value, (void *)((u32)pci_reg_base+offset)))
+
+static void __init
+bamboo_setup_pci(void)
+{
+	void *pci_reg_base;
+	unsigned long memory_size;
+	memory_size = ppc_md.find_end_of_memory();
+
+	pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
+
+	/* Enable PCI I/O, Mem, and Busmaster cycles */
+	PCI_WRITEW(PCI_READW(PCI_COMMAND) |
+		   PCI_COMMAND_MEMORY |
+		   PCI_COMMAND_MASTER, PCI_COMMAND);
+
+	/* Disable region first */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
+
+	/* PLB starting addr: 0x00000000A0000000 */
+	PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
+
+	/* PCI start addr, 0xA0000000 (PCI Address) */
+	PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
+
+	/* Enable no pre-fetch, enable region */
+	PCI_WRITEL(((0xffffffff -
+		     (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
+		      BAMBOO_PCIL0_PMM0MA);
+
+	/* Disable region one */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
+
+	/* Disable region two */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
+
+	/* Now configure the PCI->PLB windows, we only use PTM1
+	 *
+	 * For Inbound flow, set the window size to all available memory
+	 * This is required because if size is smaller,
+	 * then Eth/PCI DD would fail as PCI card not able to access
+	 * the memory allocated by DD.
+	 */
+
+	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);	/* disabled region 1 */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);	/* begin of address map */
+
+	memory_size = 1 << fls(memory_size - 1);
+
+	/* Size low + Enabled */
+	PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
+
+	eieio();
+	iounmap(pci_reg_base);
+}
+
+static void __init
+bamboo_setup_hose(void)
+{
+	unsigned int bar_response, bar;
+	struct pci_controller *hose;
+
+	bamboo_setup_pci();
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
+
+	pci_init_resource(&hose->io_resource,
+			BAMBOO_PCI_LOWER_IO,
+			BAMBOO_PCI_UPPER_IO,
+			IORESOURCE_IO,
+			"PCI host bridge");
+
+	pci_init_resource(&hose->mem_resources[0],
+			BAMBOO_PCI_LOWER_MEM,
+			BAMBOO_PCI_UPPER_MEM,
+			IORESOURCE_MEM,
+			"PCI host bridge");
+
+	ppc_md.pci_exclude_device = bamboo_exclude_device;
+
+	hose->io_space.start = BAMBOO_PCI_LOWER_IO;
+	hose->io_space.end = BAMBOO_PCI_UPPER_IO;
+	hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
+	hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
+	isa_io_base =
+		(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
+	hose->io_base_virt = (void *)isa_io_base;
+
+	setup_indirect_pci(hose,
+			BAMBOO_PCI_CFGA_PLB32,
+			BAMBOO_PCI_CFGD_PLB32);
+	hose->set_cfg_type = 1;
+
+	/* Zero config bars */
+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+		early_write_config_dword(hose, hose->first_busno,
+					 PCI_FUNC(hose->first_busno), bar,
+					 0x00000000);
+		early_read_config_dword(hose, hose->first_busno,
+					PCI_FUNC(hose->first_busno), bar,
+					&bar_response);
+	}
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = bamboo_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+bamboo_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
+	port.irq = 0;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(0, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
+	port.irq = 1;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(1, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
+	port.irq = 3;
+	port.uartclk = clocks.uart2;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(2, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
+	port.irq = 4;
+	port.uartclk = clocks.uart3;
+	port.line = 3;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 3 failed\n");
+	}
+}
+
+static void __init
+bamboo_setup_arch(void)
+{
+
+	bamboo_set_emacdata();
+
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* Setup TODC access */
+	TODC_INIT(TODC_TYPE_DS1743,
+			0,
+			0,
+			ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
+			8);
+
+	/* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCI host bridge */
+	bamboo_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	bamboo_early_serial_map();
+
+	/* Identify the system */
+	printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+
+	ibm44x_platform_init();
+
+	ppc_md.setup_arch = bamboo_setup_arch;
+	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = bamboo_calibrate_decr;
+	ppc_md.time_init = todc_time_init;
+	ppc_md.set_rtc_time = todc_set_rtc_time;
+	ppc_md.get_rtc_time = todc_get_rtc_time;
+
+	ppc_md.nvram_read_val = todc_direct_read_val;
+	ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = bamboo_early_serial_map;
+#endif
+}
+
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/bamboo.h linux-2.6.13-rc5/arch/ppc/platforms/4xx/bamboo.h
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/bamboo.h	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/bamboo.h	2005-08-01 22:29:10.095567630 -0700
@@ -0,0 +1,136 @@
+/*
+ * arch/ppc/platforms/bamboo.h
+ *
+ * Bamboo board definitions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_BAMBOO_H__
+#define __ASM_BAMBOO_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm440ep.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0		0x0EF600E00
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE			0xfff00000
+#define PIBS_MAC_BASE			(PIBS_FLASH_BASE+0xc0400)
+#define PIBS_MAC_SIZE			0x200
+#define PIBS_MAC_OFFSET			0x100
+
+/* Default clock rate */
+#define BAMBOO_TMRCLK			25000000
+
+/* RTC/NVRAM location */
+#define BAMBOO_RTC_ADDR			0x080000000ULL
+#define BAMBOO_RTC_SIZE			0x2000
+
+/* FPGA Registers */
+#define BAMBOO_FPGA_ADDR		0x080002000ULL
+
+#define BAMBOO_FPGA_CONFIG2_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x1)
+#define BAMBOO_FULL_DUPLEX_EN(x)	(x & 0x08)
+#define BAMBOO_FORCE_100Mbps(x)		(x & 0x04)
+#define BAMBOO_AUTONEGOTIATE(x)		(x & 0x02)
+
+#define BAMBOO_FPGA_SETTING_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x3)
+#define BAMBOO_BOOT_SMALL_FLASH(x)	(!(x & 0x80))
+#define BAMBOO_LARGE_FLASH_EN(x)	(!(x & 0x40))
+#define BAMBOO_BOOT_NAND_FLASH(x)	(!(x & 0x20))
+
+#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
+#define BAMBOO_SEL_MII(x)		(x & 0x80)
+#define BAMBOO_SEL_RMII(x)		(x & 0x40)
+#define BAMBOO_SEL_SMII(x)		(x & 0x20)
+
+/* Flash */
+#define BAMBOO_SMALL_FLASH_LOW		0x087f00000ULL
+#define BAMBOO_SMALL_FLASH_HIGH		0x0fff00000ULL
+#define BAMBOO_SMALL_FLASH_SIZE		0x100000
+#define BAMBOO_LARGE_FLASH_LOW		0x087800000ULL
+#define BAMBOO_LARGE_FLASH_HIGH1	0x0ff800000ULL
+#define BAMBOO_LARGE_FLASH_HIGH2	0x0ffc00000ULL
+#define BAMBOO_LARGE_FLASH_SIZE		0x400000
+#define BAMBOO_SRAM_LOW			0x087f00000ULL
+#define BAMBOO_SRAM_HIGH1		0x0fff00000ULL
+#define BAMBOO_SRAM_HIGH2		0x0ff800000ULL
+#define BAMBOO_SRAM_SIZE		0x100000
+#define BAMBOO_NAND_FLASH_REG_ADDR	0x090000000ULL
+#define BAMBOO_NAND_FLASH_REG_SIZE	0x2000
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE			4
+
+#define UART0_IO_BASE			0xEF600300
+#define UART1_IO_BASE			0xEF600400
+#define UART2_IO_BASE			0xEF600500
+#define UART3_IO_BASE			0xEF600600
+
+#define BASE_BAUD			33177600/3/16
+#define UART0_INT			0
+#define UART1_INT			1
+#define UART2_INT			3
+#define UART3_INT			4
+
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)		\
+	STD_UART_OP(3)
+
+/* PCI support */
+#define BAMBOO_PCI_CFGA_PLB32		0xeec00000
+#define BAMBOO_PCI_CFGD_PLB32		0xeec00004
+
+#define BAMBOO_PCI_IO_BASE		0x00000000e8000000ULL
+#define BAMBOO_PCI_IO_SIZE		0x00010000
+#define BAMBOO_PCI_MEM_OFFSET		0x00000000
+#define BAMBOO_PCI_PHY_MEM_BASE		0x00000000a0000000ULL
+
+#define BAMBOO_PCI_LOWER_IO		0x00000000
+#define BAMBOO_PCI_UPPER_IO		0x0000ffff
+#define BAMBOO_PCI_LOWER_MEM		0xa0000000
+#define BAMBOO_PCI_UPPER_MEM		0xafffffff
+#define BAMBOO_PCI_MEM_BASE		0xa0000000
+
+#define BAMBOO_PCIL0_BASE		0x00000000ef400000ULL
+#define BAMBOO_PCIL0_SIZE		0x40
+
+#define BAMBOO_PCIL0_PMM0LA		0x000
+#define BAMBOO_PCIL0_PMM0MA		0x004
+#define BAMBOO_PCIL0_PMM0PCILA		0x008
+#define BAMBOO_PCIL0_PMM0PCIHA		0x00C
+#define BAMBOO_PCIL0_PMM1LA		0x010
+#define BAMBOO_PCIL0_PMM1MA		0x014
+#define BAMBOO_PCIL0_PMM1PCILA		0x018
+#define BAMBOO_PCIL0_PMM1PCIHA		0x01C
+#define BAMBOO_PCIL0_PMM2LA		0x020
+#define BAMBOO_PCIL0_PMM2MA		0x024
+#define BAMBOO_PCIL0_PMM2PCILA		0x028
+#define BAMBOO_PCIL0_PMM2PCIHA		0x02C
+#define BAMBOO_PCIL0_PTM1MS		0x030
+#define BAMBOO_PCIL0_PTM1LA		0x034
+#define BAMBOO_PCIL0_PTM2MS		0x038
+#define BAMBOO_PCIL0_PTM2LA		0x03C
+
+#endif                          /* __ASM_BAMBOO_H__ */
+#endif                          /* __KERNEL__ */
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ebony.c linux-2.6.13-rc5/arch/ppc/platforms/4xx/ebony.c
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ebony.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ebony.c	2005-08-01 22:29:10.096567674 -0700
@@ -7,7 +7,7 @@
  * Copyright 2002-2005 MontaVista Software Inc.
  *
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
+ * Copyright (c) 2003-2005 Zultys Technologies
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -50,6 +50,7 @@
 #include <asm/bootinfo.h>
 #include <asm/ppc4xx_pic.h>
 #include <asm/ppcboot.h>
+#include <asm/tlbflush.h>
 
 #include <syslib/gen550.h>
 #include <syslib/ibm440gp_common.h>
@@ -248,6 +249,9 @@
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 	/* Configure debug serial access */
 	gen550_init(0, &port);
+
+	/* Purge TLB entry added in head_44x.S for early serial access */
+	_tlbie(UART0_IO_BASE);
 #endif
 
 	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ebony.h linux-2.6.13-rc5/arch/ppc/platforms/4xx/ebony.h
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ebony.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ebony.h	2005-08-01 22:29:10.096567674 -0700
@@ -56,9 +56,18 @@
  * Serial port defines
  */
 
-/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#if defined(__BOOTER__)
+/* OpenBIOS defined UART mappings, used by bootloader shim */
 #define UART0_IO_BASE	0xE0000200
 #define UART1_IO_BASE	0xE0000300
+#else
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM.    --ebs
+ */
+#define UART0_IO_BASE	0xF0000200
+#define UART1_IO_BASE	0xF0000300
+#endif
 
 /* external Epson SG-615P */
 #define BASE_BAUD	691200
@@ -66,7 +75,7 @@
 #define STD_UART_OP(num)					\
 	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
 		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: UART##num##_IO_BASE,		\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
 		io_type: SERIAL_IO_MEM},
 
 #define SERIAL_PORT_DFNS	\
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ibm440ep.c linux-2.6.13-rc5/arch/ppc/platforms/4xx/ibm440ep.c
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ibm440ep.c	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ibm440ep.c	2005-08-01 22:29:10.096567674 -0700
@@ -0,0 +1,220 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.c
+ *
+ * PPC440EP I/O descriptions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440ep.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm440ep_emac0_def = {
+	.rgmii_idx	= -1,           /* No RGMII */
+	.rgmii_mux	= -1,           /* No RGMII */
+	.zmii_idx       = 0,            /* ZMII device index */
+	.zmii_mux       = 0,            /* ZMII input of this EMAC */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,           /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440ep_emac1_def = {
+	.rgmii_idx	= -1,           /* No RGMII */
+	.rgmii_mux	= -1,           /* No RGMII */
+	.zmii_idx       = 0,            /* ZMII device index */
+	.zmii_mux       = 1,            /* ZMII input of this EMAC */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 1,            /* MAL rx channel number */
+	.mal_tx_chan    = 2,            /* MAL tx channel number */
+	.wol_irq        = 63,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,           /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440ep_mal0_def = {
+	.num_tx_chans   = 4,  		/* Number of TX channels */
+	.num_rx_chans   = 2,    	/* Number of RX channels */
+	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 32,		/* MAL System Error IRQ    */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440ep_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440ep_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_OPB,
+	  .index	= 0,
+	  .paddr	= 0x0EF600000ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440EP_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440EP_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440EP_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 3,
+	  .paddr	= PPC440EP_UART3_ADDR,
+	  .irq		= UART3_INT,
+	  .pm		= IBM_CPM_UART3,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x0EF600700ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &ibm440ep_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x0EF600800ULL,
+	  .irq		= 7,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &ibm440ep_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x0EF600B00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 1,
+	  .paddr	= 0x0EF600C00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x0EF600E00ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 1,
+	  .paddr	= 0x0EF600F00ULL,
+	  .irq		= 62,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_emac1_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_ZMII,
+	  .paddr	= 0x0EF600D00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity	= 0xffbffe03,
+	  .triggering   = 0xfffffe00,
+	  .ext_irq_mask = 0x000001fc,	/* IRQ0 - IRQ6 */
+	},
+	{ .polarity	= 0xffffc6ef,
+	  .triggering	= 0xffffc7ff,
+	  .ext_irq_mask = 0x00003800,	/* IRQ7 - IRQ9 */
+	},
+};
+
+static struct resource usb_gadget_resources[] = {
+	[0] = {
+		.start	= 0x050000100ULL,
+		.end 	= 0x05000017FULL,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 55,
+		.end	= 55,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 dma_mask = 0xffffffffULL;
+
+static struct platform_device usb_gadget_device = {
+	.name		= "musbhsfc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usb_gadget_resources),
+	.resource       = usb_gadget_resources,
+	.dev		= {
+		.dma_mask = &dma_mask,
+		.coherent_dma_mask = 0xffffffffULL,
+	}
+};
+
+static struct platform_device *ibm440ep_devs[] __initdata = {
+	&usb_gadget_device,
+};
+
+static int __init
+ibm440ep_platform_add_devices(void)
+{
+	return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
+}
+arch_initcall(ibm440ep_platform_add_devices);
+
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ibm440ep.h linux-2.6.13-rc5/arch/ppc/platforms/4xx/ibm440ep.h
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ibm440ep.h	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ibm440ep.h	2005-08-01 22:29:10.097567718 -0700
@@ -0,0 +1,76 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.h
+ *
+ * PPC440EP definitions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright 2002 Roland Dreier
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440EP_H
+#define __PPC_PLATFORMS_IBM440EP_H
+
+#include <linux/config.h>
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440EP_UART0_ADDR		0x0EF600300
+#define PPC440EP_UART1_ADDR		0x0EF600400
+#define PPC440EP_UART2_ADDR		0x0EF600500
+#define PPC440EP_UART3_ADDR		0x0EF600600
+#define UART0_INT			0
+#define UART1_INT			1
+#define UART2_INT			3
+#define UART3_INT			4
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_USB1H		0x08000000	/* USB 1.1 Host */
+#define IBM_CPM_FPU		0x04000000	/* floating point unit */
+#define IBM_CPM_CPU		0x02000000	/* processor core */
+#define IBM_CPM_DMA		0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		0x00200000	/* External Bus Controller */
+#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB4		0x00040000	/* PLB4 bus arbiter */
+#define IBM_CPM_PLB4x3		0x00020000	/* PLB4 to PLB3 bridge controller */
+#define IBM_CPM_PLB3x4		0x00010000	/* PLB3 to PLB4 bridge controller */
+#define IBM_CPM_PLB3		0x00008000	/* PLB3 bus arbiter */
+#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0		0x00000020	/* ethernet port 0 */
+#define IBM_CPM_EMAC1		0x00000010	/* ethernet port 1 */
+#define IBM_CPM_UART2		0x00000008	/* serial port 2 */
+#define IBM_CPM_UART3		0x00000004	/* serial port 3 */
+#define IBM_CPM_USB2D		0x00000002	/* USB 2.0 Device */
+#define IBM_CPM_USB2H		0x00000001	/* USB 2.0 Host */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
+				| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
+				| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
+				| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
+				| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
+
+
+#endif /* __PPC_PLATFORMS_IBM440EP_H */
+#endif /* __KERNEL__ */
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ocotea.c linux-2.6.13-rc5/arch/ppc/platforms/4xx/ocotea.c
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ocotea.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ocotea.c	2005-08-01 22:29:10.097567718 -0700
@@ -48,6 +48,7 @@
 #include <asm/bootinfo.h>
 #include <asm/ppc4xx_pic.h>
 #include <asm/ppcboot.h>
+#include <asm/tlbflush.h>
 
 #include <syslib/gen550.h>
 #include <syslib/ibm440gx_common.h>
@@ -266,6 +267,9 @@
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 	/* Configure debug serial access */
 	gen550_init(0, &port);
+
+	/* Purge TLB entry added in head_44x.S for early serial access */
+	_tlbie(UART0_IO_BASE);
 #endif
 
 	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff -urN linux-2.6.13-rc4/arch/ppc/platforms/4xx/ocotea.h linux-2.6.13-rc5/arch/ppc/platforms/4xx/ocotea.h
--- linux-2.6.13-rc4/arch/ppc/platforms/4xx/ocotea.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/platforms/4xx/ocotea.h	2005-08-01 22:29:10.097567718 -0700
@@ -55,15 +55,24 @@
  */
 #define RS_TABLE_SIZE	2
 
-/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#if defined(__BOOTER__)
+/* OpenBIOS defined UART mappings, used by bootloader shim */
 #define UART0_IO_BASE	0xE0000200
 #define UART1_IO_BASE	0xE0000300
+#else
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM.    --ebs
+ */
+#define UART0_IO_BASE	0xF0000200
+#define UART1_IO_BASE	0xF0000300
+#endif
 
 #define BASE_BAUD	11059200/16
 #define STD_UART_OP(num)					\
 	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
 		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: UART##num##_IO_BASE,		\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
 		io_type: SERIAL_IO_MEM},
 
 #define SERIAL_PORT_DFNS	\
diff -urN linux-2.6.13-rc4/arch/ppc/syslib/Makefile linux-2.6.13-rc5/arch/ppc/syslib/Makefile
--- linux-2.6.13-rc4/arch/ppc/syslib/Makefile	2005-08-01 22:29:03.115260836 -0700
+++ linux-2.6.13-rc5/arch/ppc/syslib/Makefile	2005-08-01 22:29:10.106568113 -0700
@@ -11,6 +11,7 @@
 obj-$(CONFIG_PPC_OCP)		+= ocp.o
 obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
 obj-$(CONFIG_44x)		+= ibm44x_common.o
+obj-$(CONFIG_440EP)		+= ibm440gx_common.o
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
@@ -44,6 +45,7 @@
 obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o todc_time.o
 obj-$(CONFIG_ADIR)		+= i8259.o indirect_pci.o pci_auto.o \
 					todc_time.o
+obj-$(CONFIG_BAMBOO)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
 obj-$(CONFIG_EBONY)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
diff -urN linux-2.6.13-rc4/arch/ppc/syslib/ibm440gx_common.c linux-2.6.13-rc5/arch/ppc/syslib/ibm440gx_common.c
--- linux-2.6.13-rc4/arch/ppc/syslib/ibm440gx_common.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/syslib/ibm440gx_common.c	2005-08-01 22:29:10.107568157 -0700
@@ -34,6 +34,10 @@
 	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
 	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
 	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
+#ifdef CONFIG_440EP
+	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
+	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
+#endif
 
 	/* Dividers */
 	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
@@ -96,6 +100,17 @@
 		p->uart1 = ser_clk;
 	else
 		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
+#ifdef CONFIG_440EP
+	if (uart2 & 0x00800000)
+		p->uart2 = ser_clk;
+	else
+		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
+
+	if (uart3 & 0x00800000)
+		p->uart3 = ser_clk;
+	else
+		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
+#endif
 }
 
 /* Issue L2C diagnostic command */
diff -urN linux-2.6.13-rc4/arch/ppc/syslib/ibm44x_common.h linux-2.6.13-rc5/arch/ppc/syslib/ibm44x_common.h
--- linux-2.6.13-rc4/arch/ppc/syslib/ibm44x_common.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/ppc/syslib/ibm44x_common.h	2005-08-01 22:29:10.107568157 -0700
@@ -29,6 +29,10 @@
 	unsigned int ebc;	/* PerClk */
 	unsigned int uart0;
 	unsigned int uart1;
+#ifdef CONFIG_440EP
+	unsigned int uart2;
+	unsigned int uart3;
+#endif
 };
 
 /* common 44x platform init */
diff -urN linux-2.6.13-rc4/arch/ppc64/kernel/misc.S linux-2.6.13-rc5/arch/ppc64/kernel/misc.S
--- linux-2.6.13-rc4/arch/ppc64/kernel/misc.S	2005-08-01 22:29:03.163262946 -0700
+++ linux-2.6.13-rc5/arch/ppc64/kernel/misc.S	2005-08-01 22:29:10.151570091 -0700
@@ -1129,6 +1129,9 @@
 	.llong .compat_sys_waitid
 	.llong .sys32_ioprio_set
 	.llong .sys32_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch
 
 	.balign 8
 _GLOBAL(sys_call_table)
@@ -1407,3 +1410,6 @@
 	.llong .sys_waitid
 	.llong .sys_ioprio_set
 	.llong .sys_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch
diff -urN linux-2.6.13-rc4/arch/ppc64/kernel/prom.c linux-2.6.13-rc5/arch/ppc64/kernel/prom.c
--- linux-2.6.13-rc4/arch/ppc64/kernel/prom.c	2005-08-01 22:29:03.172263342 -0700
+++ linux-2.6.13-rc5/arch/ppc64/kernel/prom.c	2005-08-01 22:29:10.160570487 -0700
@@ -916,6 +916,7 @@
 		}
 	}
 
+#ifdef CONFIG_ALTIVEC
 	/* Check if we have a VMX and eventually update CPU features */
 	prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL);
 	if (prop && (*prop) > 0) {
@@ -929,6 +930,7 @@
 		cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
 		cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
 	}
+#endif /* CONFIG_ALTIVEC */
 
 	/*
 	 * Check for an SMT capable CPU and set the CPU feature. We do
diff -urN linux-2.6.13-rc4/arch/ppc64/mm/numa.c linux-2.6.13-rc5/arch/ppc64/mm/numa.c
--- linux-2.6.13-rc4/arch/ppc64/mm/numa.c	2005-08-01 22:29:03.186263957 -0700
+++ linux-2.6.13-rc5/arch/ppc64/mm/numa.c	2005-08-01 22:29:10.176571190 -0700
@@ -647,7 +647,12 @@
 new_range:
 			mem_start = read_n_cells(addr_cells, &memcell_buf);
 			mem_size = read_n_cells(size_cells, &memcell_buf);
-			numa_domain = numa_enabled ? of_node_numa_domain(memory) : 0;
+			if (numa_enabled) {
+				numa_domain = of_node_numa_domain(memory);
+				if (numa_domain  >= MAX_NUMNODES)
+					numa_domain = 0;
+			} else
+				numa_domain =  0;
 
 			if (numa_domain != nid)
 				continue;
diff -urN linux-2.6.13-rc4/arch/s390/appldata/appldata_base.c linux-2.6.13-rc5/arch/s390/appldata/appldata_base.c
--- linux-2.6.13-rc4/arch/s390/appldata/appldata_base.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/s390/appldata/appldata_base.c	2005-08-01 22:29:10.178571278 -0700
@@ -232,7 +232,11 @@
 	ry = -1;
 	asm volatile(
 			"diag %1,%0,0xDC\n\t"
-			: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
+			: "=d" (ry)
+			: "d" (&appldata_parameter_list),
+			  "m" (appldata_parameter_list),
+			  "m" (appldata_product_id)
+			: "cc");
 	return (int) ry;
 }
 /************************ timer, work, DIAG <END> ****************************/
diff -urN linux-2.6.13-rc4/arch/s390/defconfig linux-2.6.13-rc5/arch/s390/defconfig
--- linux-2.6.13-rc4/arch/s390/defconfig	2005-08-01 22:29:03.189264089 -0700
+++ linux-2.6.13-rc5/arch/s390/defconfig	2005-08-01 22:29:10.180571366 -0700
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc3
-# Fri Apr 22 15:30:58 2005
+# Linux kernel version: 2.6.13-rc4
+# Fri Jul 29 14:49:30 2005
 #
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -23,10 +23,11 @@
 CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
@@ -36,6 +37,8 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -51,9 +54,10 @@
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
@@ -81,8 +85,15 @@
 # CONFIG_MARCH_Z990 is not set
 CONFIG_PACK_STACK=y
 # CONFIG_SMALL_STACK is not set
-# CONFIG_CHECK_STACK is not set
+CONFIG_CHECK_STACK=y
+CONFIG_STACK_GUARD=256
 # CONFIG_WARN_STACK is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 
 #
 # I/O subsystem configuration
@@ -95,7 +106,7 @@
 #
 # Misc
 #
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -105,9 +116,110 @@
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
-# CONFIG_VIRT_TIMER is not set
+CONFIG_VIRT_TIMER=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+# CONFIG_APPLDATA_BASE is not set
 CONFIG_NO_IDLE_HZ=y
 CONFIG_NO_IDLE_HZ_INIT=y
+# CONFIG_KEXEC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 # CONFIG_PCMCIA is not set
 
 #
@@ -133,6 +245,7 @@
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -205,7 +318,13 @@
 # CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Character device drivers
@@ -231,7 +350,8 @@
 CONFIG_SCLP=y
 CONFIG_SCLP_TTY=y
 CONFIG_SCLP_CONSOLE=y
-# CONFIG_SCLP_VT220_TTY is not set
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
 CONFIG_SCLP_CPI=m
 CONFIG_S390_TAPE=m
 
@@ -255,105 +375,8 @@
 CONFIG_Z90CRYPT=m
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -411,12 +434,15 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -426,6 +452,7 @@
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -433,6 +460,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -457,7 +485,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -486,15 +513,18 @@
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -544,11 +574,12 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 
 #
 # Security options
diff -urN linux-2.6.13-rc4/arch/s390/kernel/compat_wrapper.S linux-2.6.13-rc5/arch/s390/kernel/compat_wrapper.S
--- linux-2.6.13-rc4/arch/s390/kernel/compat_wrapper.S	2005-08-01 22:29:03.191264177 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/compat_wrapper.S	2005-08-01 22:29:10.182571454 -0700
@@ -1449,3 +1449,29 @@
 	llgtr	%r4,%r4			# struct kexec_segment *
 	llgfr	%r5,%r5			# unsigned long
 	jg	compat_sys_kexec_load
+
+	.globl	sys_ioprio_set_wrapper
+sys_ioprio_set_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	lgfr	%r4,%r4			# int
+	jg	sys_ioprio_set
+
+	.globl	sys_ioprio_get_wrapper
+sys_ioprio_get_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	jg	sys_ioprio_get
+
+	.globl	sys_inotify_add_watch_wrapper
+sys_inotify_add_watch_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# const char *
+	llgfr	%r4,%r4			# u32
+	jg	sys_inotify_add_watch
+
+	.globl	sys_inotify_rm_watch_wrapper
+sys_inotify_rm_watch_wrapper:
+	lgfr	%r2,%r2			# int
+	llgfr	%r3,%r3			# u32
+	jg	sys_inotify_rm_watch
diff -urN linux-2.6.13-rc4/arch/s390/kernel/head.S linux-2.6.13-rc5/arch/s390/kernel/head.S
--- linux-2.6.13-rc4/arch/s390/kernel/head.S	2005-08-01 22:29:03.197264440 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/head.S	2005-08-01 22:29:10.188571718 -0700
@@ -346,6 +346,13 @@
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw              # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw
diff -urN linux-2.6.13-rc4/arch/s390/kernel/head64.S linux-2.6.13-rc5/arch/s390/kernel/head64.S
--- linux-2.6.13-rc4/arch/s390/kernel/head64.S	2005-08-01 22:29:03.198264484 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/head64.S	2005-08-01 22:29:10.189571762 -0700
@@ -345,6 +345,13 @@
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw	       # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw
diff -urN linux-2.6.13-rc4/arch/s390/kernel/machine_kexec.c linux-2.6.13-rc5/arch/s390/kernel/machine_kexec.c
--- linux-2.6.13-rc4/arch/s390/kernel/machine_kexec.c	2005-08-01 22:29:03.198264484 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/machine_kexec.c	2005-08-01 22:29:10.189571762 -0700
@@ -70,6 +70,8 @@
 	for (;;);
 }
 
+extern void pfault_fini(void);
+
 static void
 kexec_halt_all_cpus(void *kernel_image)
 {
@@ -78,6 +80,11 @@
 	struct kimage *image;
 	relocate_kernel_t data_mover;
 
+#ifdef CONFIG_PFAULT
+	if (MACHINE_IS_VM)
+		pfault_fini();
+#endif
+
 	if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid))
 		signal_processor(smp_processor_id(), sigp_stop);
 
diff -urN linux-2.6.13-rc4/arch/s390/kernel/relocate_kernel.S linux-2.6.13-rc5/arch/s390/kernel/relocate_kernel.S
--- linux-2.6.13-rc4/arch/s390/kernel/relocate_kernel.S	2005-08-01 22:29:03.199264528 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/relocate_kernel.S	2005-08-01 22:29:10.190571806 -0700
@@ -4,6 +4,7 @@
  * (C) Copyright IBM Corp. 2005
  *
  * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
 
@@ -25,8 +26,31 @@
 	relocate_kernel:
 		basr	%r13,0		#base address
 	.base:
-		spx	zero64-.base(%r13)	#absolute addressing mode
 		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQ (external)
+		spx	zero64-.base(%r13)	#absolute addressing mode
+		stctl	%c0,%c15,ctlregs-.base(%r13)
+		stm	%r0,%r15,gprregs-.base(%r13)
+		la	%r1,load_psw-.base(%r13)
+		mvc     0(8,%r0),0(%r1)
+		la	%r0,.back-.base(%r13)
+		st	%r0,4(%r0)
+		oi	4(%r0),0x80
+		mvc	0x68(8,%r0),0(%r1)
+		la	%r0,.back_pgm-.base(%r13)
+		st	%r0,0x6c(%r0)
+		oi	0x6c(%r0),0x80
+		lhi	%r0,0
+		diag	%r0,%r0,0x308
+	.back:
+		basr	%r13,0
+	.back_base:
+		oi	have_diag308-.back_base(%r13),0x01
+		lctl	%c0,%c15,ctlregs-.back_base(%r13)
+		lm	%r0,%r15,gprregs-.back_base(%r13)
+		j	.start_reloc
+	.back_pgm:
+		lm	%r0,%r15,gprregs-.base(%r13)
+	.start_reloc:
 		lhi	%r10,-1		#preparing the mask
 		sll	%r10,12		#shift it such that it becomes 0xf000
 	.top:
@@ -63,6 +87,10 @@
 		o	%r3,4(%r4)	#or load address into psw
 		st	%r3,4(%r4)
 		mvc	0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		tm	have_diag308-.base(%r13),0x01
+		jno	.no_diag308
+		diag	%r0,%r0,0x308
+	.no_diag308:
 		sr	%r1,%r1		#clear %r1
 		sr	%r2,%r2		#clear %r2
 		sigp	%r1,%r2,0x12	#set cpuid to zero
@@ -75,6 +103,17 @@
 		.long	0x00080000,0x80000000
 	sys_msk:
 		.quad	0
+	ctlregs:
+		.rept	16
+		.long	0
+		.endr
+	gprregs:
+		.rept	16
+		.long	0
+		.endr
+	have_diag308:
+		.byte	0
+		.align	8
 	relocate_kernel_end:
 	.globl	relocate_kernel_len
 	relocate_kernel_len:
diff -urN linux-2.6.13-rc4/arch/s390/kernel/relocate_kernel64.S linux-2.6.13-rc5/arch/s390/kernel/relocate_kernel64.S
--- linux-2.6.13-rc4/arch/s390/kernel/relocate_kernel64.S	2005-08-01 22:29:03.199264528 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/relocate_kernel64.S	2005-08-01 22:29:10.190571806 -0700
@@ -4,6 +4,7 @@
  * (C) Copyright IBM Corp. 2005
  *
  * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
 
@@ -26,8 +27,34 @@
 	relocate_kernel:
 		basr	%r13,0		#base address
 	.base:
+		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQs
 		spx	zero64-.base(%r13)	#absolute addressing mode
-		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQ (external)
+		stctg	%c0,%c15,ctlregs-.base(%r13)
+		stmg	%r0,%r15,gprregs-.base(%r13)
+		lghi	%r0,3
+		sllg	%r0,%r0,31
+		stg	%r0,0x1d0(%r0)
+		la	%r0,.back_pgm-.base(%r13)
+		stg	%r0,0x1d8(%r0)
+		la	%r1,load_psw-.base(%r13)
+		mvc     0(8,%r0),0(%r1)
+		la	%r0,.back-.base(%r13)
+		st	%r0,4(%r0)
+		oi	4(%r0),0x80
+		lghi	%r0,0
+		diag	%r0,%r0,0x308
+	.back:
+		lhi	%r1,1		#mode 1 = esame
+		sigp	%r1,%r0,0x12	#switch to esame mode
+		sam64			#switch to 64 bit addressing mode
+		basr	%r13,0
+	.back_base:
+		oi	have_diag308-.back_base(%r13),0x01
+		lctlg	%c0,%c15,ctlregs-.back_base(%r13)
+		lmg	%r0,%r15,gprregs-.back_base(%r13)
+		j	.top
+	.back_pgm:
+		lmg	%r0,%r15,gprregs-.base(%r13)
 	.top:
 		lghi	%r7,4096	#load PAGE_SIZE in r7
 		lghi	%r9,4096	#load PAGE_SIZE in r9
@@ -62,6 +89,10 @@
 		o	%r3,4(%r4)	#or load address into psw
 		st	%r3,4(%r4)
 		mvc     0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		tm	have_diag308-.base(%r13),0x01
+		jno	.no_diag308
+		diag	%r0,%r0,0x308
+	.no_diag308:
 		sam31			#31 bit mode
 		sr      %r1,%r1		#erase register r1
 		sr      %r2,%r2		#erase register r2
@@ -75,8 +106,18 @@
 		.long	0x00080000,0x80000000
 	sys_msk:
 		.quad	0
+	ctlregs:
+		.rept	16
+		.quad	0
+		.endr
+	gprregs:
+		.rept	16
+		.quad	0
+		.endr
+	have_diag308:
+		.byte	0
+		.align	8
 	relocate_kernel_end:
 	.globl	relocate_kernel_len
 	relocate_kernel_len:
 		.quad	relocate_kernel_end - relocate_kernel
-
diff -urN linux-2.6.13-rc4/arch/s390/kernel/smp.c linux-2.6.13-rc5/arch/s390/kernel/smp.c
--- linux-2.6.13-rc4/arch/s390/kernel/smp.c	2005-08-01 22:29:03.201264616 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/smp.c	2005-08-01 22:29:10.192571893 -0700
@@ -537,7 +537,8 @@
 #endif
 #ifdef CONFIG_PFAULT
 	/* Enable pfault pseudo page faults on this cpu. */
-	pfault_init();
+	if (MACHINE_IS_VM)
+		pfault_init();
 #endif
 	/* Mark this cpu as online */
 	cpu_set(smp_processor_id(), cpu_online_map);
@@ -690,7 +691,8 @@
 
 #ifdef CONFIG_PFAULT
 	/* Disable pfault pseudo page faults on this cpu. */
-	pfault_fini();
+	if (MACHINE_IS_VM)
+		pfault_fini();
 #endif
 
 	/* disable all external interrupts */
diff -urN linux-2.6.13-rc4/arch/s390/kernel/syscalls.S linux-2.6.13-rc5/arch/s390/kernel/syscalls.S
--- linux-2.6.13-rc4/arch/s390/kernel/syscalls.S	2005-08-01 22:29:03.201264616 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/syscalls.S	2005-08-01 22:29:10.192571893 -0700
@@ -290,3 +290,8 @@
 SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
 SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl)		/* 280 */
 SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
+SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
+SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
+SYSCALL(sys_inotify_init,sys_inotify_init,sys_inotify_init)
+SYSCALL(sys_inotify_add_watch,sys_inotify_add_watch,sys_inotify_add_watch_wrapper)
+SYSCALL(sys_inotify_rm_watch,sys_inotify_rm_watch,sys_inotify_rm_watch_wrapper)
diff -urN linux-2.6.13-rc4/arch/s390/kernel/traps.c linux-2.6.13-rc5/arch/s390/kernel/traps.c
--- linux-2.6.13-rc4/arch/s390/kernel/traps.c	2005-08-01 22:29:03.201264616 -0700
+++ linux-2.6.13-rc5/arch/s390/kernel/traps.c	2005-08-01 22:29:10.193571937 -0700
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
+#include <linux/reboot.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -675,6 +676,19 @@
 	panic("Corrupt kernel stack, can't continue.");
 }
 
+#ifndef CONFIG_ARCH_S390X
+static int
+pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	if (MACHINE_IS_VM)
+		cpcmd("SET PAGEX OFF", NULL, 0, NULL);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block pagex_reboot_notifier = {
+	.notifier_call = &pagex_reboot_event,
+};
+#endif
 
 /* init is done in lowcore.S and head.S */
 
@@ -735,6 +749,7 @@
 						    &ext_int_pfault);
 #endif
 #ifndef CONFIG_ARCH_S390X
+		register_reboot_notifier(&pagex_reboot_notifier);
 		cpcmd("SET PAGEX ON", NULL, 0, NULL);
 #endif
 	}
diff -urN linux-2.6.13-rc4/arch/um/drivers/Makefile linux-2.6.13-rc5/arch/um/drivers/Makefile
--- linux-2.6.13-rc4/arch/um/drivers/Makefile	2005-08-01 22:29:03.231265935 -0700
+++ linux-2.6.13-rc5/arch/um/drivers/Makefile	2005-08-01 22:29:10.224573300 -0700
@@ -19,6 +19,8 @@
 
 LDFLAGS_pcap.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libpcap.a)
 
+targets := pcap_kern.o pcap_user.o
+
 $(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
 	$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o)
 #XXX: The call below does not work because the flags are added before the
@@ -26,7 +28,7 @@
 #$(call if_changed,ld)
 
 # When the above is fixed, don't forget to add this too!
-#targets := $(obj)/pcap.o
+#targets += $(obj)/pcap.o
 
 obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o
diff -urN linux-2.6.13-rc4/arch/um/drivers/mconsole_kern.c linux-2.6.13-rc5/arch/um/drivers/mconsole_kern.c
--- linux-2.6.13-rc4/arch/um/drivers/mconsole_kern.c	2005-08-01 22:29:03.233266023 -0700
+++ linux-2.6.13-rc5/arch/um/drivers/mconsole_kern.c	2005-08-01 22:29:10.226573388 -0700
@@ -557,7 +557,7 @@
 
 	ent = create_proc_entry("mconsole", S_IFREG | 0200, NULL);
 	if(ent == NULL){
-		printk("create_proc_mconsole : create_proc_entry failed\n");
+		printk(KERN_INFO "create_proc_mconsole : create_proc_entry failed\n");
 		return(0);
 	}
 
diff -urN linux-2.6.13-rc4/arch/um/kernel/exitcode.c linux-2.6.13-rc5/arch/um/kernel/exitcode.c
--- linux-2.6.13-rc4/arch/um/kernel/exitcode.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/exitcode.c	2005-08-01 22:29:10.231573608 -0700
@@ -48,7 +48,7 @@
 
 	ent = create_proc_entry("exitcode", 0600, &proc_root);
 	if(ent == NULL){
-		printk("make_proc_exitcode : Failed to register "
+		printk(KERN_WARNING "make_proc_exitcode : Failed to register "
 		       "/proc/exitcode\n");
 		return(0);
 	}
diff -urN linux-2.6.13-rc4/arch/um/kernel/process.c linux-2.6.13-rc5/arch/um/kernel/process.c
--- linux-2.6.13-rc4/arch/um/kernel/process.c	2005-08-01 22:29:03.240266330 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/process.c	2005-08-01 22:29:10.233573696 -0700
@@ -131,7 +131,7 @@
 	return(arg.pid);
 }
 
-static int ptrace_child(void)
+static int ptrace_child(void *arg)
 {
 	int ret;
 	int pid = os_getpid(), ppid = getppid();
@@ -160,16 +160,20 @@
 	_exit(ret);
 }
 
-static int start_ptraced_child(void)
+static int start_ptraced_child(void **stack_out)
 {
+	void *stack;
+	unsigned long sp;
 	int pid, n, status;
 	
-	pid = fork();
-	if(pid == 0)
-		ptrace_child();
-
+	stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
+		     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	if(stack == MAP_FAILED)
+		panic("check_ptrace : mmap failed, errno = %d", errno);
+	sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
+	pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
 	if(pid < 0)
-		panic("check_ptrace : fork failed, errno = %d", errno);
+		panic("check_ptrace : clone failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
 	if(n < 0)
 		panic("check_ptrace : wait failed, errno = %d", errno);
@@ -177,6 +181,7 @@
 		panic("check_ptrace : expected SIGSTOP, got status = %d",
 		      status);
 
+	*stack_out = stack;
 	return(pid);
 }
 
@@ -184,12 +189,12 @@
  * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
  * So only for SYSEMU features we test mustpanic, while normal host features
  * must work anyway!*/
-static int stop_ptraced_child(int pid, int exitcode, int mustexit)
+static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
 {
 	int status, n, ret = 0;
 
 	if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-		panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
+		panic("check_ptrace : ptrace failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
@@ -200,13 +205,15 @@
 		printk("check_ptrace : child exited with exitcode %d, while "
 		      "expecting %d; status 0x%x", exit_with,
 		      exitcode, status);
-		if (mustexit)
+		if (mustpanic)
 			panic("\n");
 		else
 			printk("\n");
 		ret = -1;
 	}
 
+	if(munmap(stack, PAGE_SIZE) < 0)
+		panic("check_ptrace : munmap failed, errno = %d", errno);
 	return ret;
 }
 
@@ -242,11 +249,12 @@
 
 static void __init check_sysemu(void)
 {
+	void *stack;
 	int pid, syscall, n, status, count=0;
 
 	printk("Checking syscall emulation patch for ptrace...");
 	sysemu_supported = 0;
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
 		goto fail;
@@ -264,7 +272,7 @@
 		panic("check_sysemu : failed to modify system "
 		      "call return, errno = %d", errno);
 
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 1;
@@ -272,7 +280,7 @@
 	set_using_sysemu(!force_sysemu_disabled);
 
 	printk("Checking advanced syscall emulation patch for ptrace...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 	while(1){
 		count++;
 		if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -297,7 +305,7 @@
 			break;
 		}
 	}
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 2;
@@ -308,17 +316,18 @@
 	return;
 
 fail:
-	stop_ptraced_child(pid, 1, 0);
+	stop_ptraced_child(pid, stack, 1, 0);
 fail_stopped:
 	printk("missing\n");
 }
 
 void __init check_ptrace(void)
 {
+	void *stack;
 	int pid, syscall, n, status;
 
 	printk("Checking that ptrace can change system call numbers...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
 		panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -345,7 +354,7 @@
 			break;
 		}
 	}
-	stop_ptraced_child(pid, 0, 1);
+	stop_ptraced_child(pid, stack, 0, 1);
 	printk("OK\n");
 	check_sysemu();
 }
@@ -380,10 +389,11 @@
 static inline void check_skas3_ptrace_support(void)
 {
 	struct ptrace_faultinfo fi;
+	void *stack;
 	int pid, n;
 
 	printf("Checking for the skas3 patch in the host...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
@@ -402,7 +412,7 @@
 	}
 
 	init_registers(pid);
-	stop_ptraced_child(pid, 1, 1);
+	stop_ptraced_child(pid, stack, 1, 1);
 }
 
 int can_do_skas(void)
diff -urN linux-2.6.13-rc4/arch/um/kernel/process_kern.c linux-2.6.13-rc5/arch/um/kernel/process_kern.c
--- linux-2.6.13-rc4/arch/um/kernel/process_kern.c	2005-08-01 22:29:03.241266374 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/process_kern.c	2005-08-01 22:29:10.234573739 -0700
@@ -412,7 +412,7 @@
 
 	if (ent == NULL)
 	{
-		printk("Failed to register /proc/sysemu\n");
+		printk(KERN_WARNING "Failed to register /proc/sysemu\n");
 		return(0);
 	}
 
diff -urN linux-2.6.13-rc4/arch/um/kernel/skas/process.c linux-2.6.13-rc5/arch/um/kernel/skas/process.c
--- linux-2.6.13-rc4/arch/um/kernel/skas/process.c	2005-08-01 22:29:03.245266550 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/skas/process.c	2005-08-01 22:29:10.238573915 -0700
@@ -64,7 +64,7 @@
                 (WSTOPSIG(status) == SIGVTALRM));
 
         if((n < 0) || !WIFSTOPPED(status) ||
-           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status != SIGTRAP))){
+           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
                 panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
                       "pid = %d, n = %d, errno = %d, status = 0x%x\n",
                       fname, pid, n, errno, status);
diff -urN linux-2.6.13-rc4/arch/um/kernel/skas/trap_user.c linux-2.6.13-rc5/arch/um/kernel/skas/trap_user.c
--- linux-2.6.13-rc4/arch/um/kernel/skas/trap_user.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/skas/trap_user.c	2005-08-01 22:29:10.241574047 -0700
@@ -58,7 +58,6 @@
         int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
                     (sig == SIGILL) || (sig == SIGTRAP));
 
-	regs->skas.is_user = 1;
 	if (segv)
 		get_skas_faultinfo(pid, &regs->skas.faultinfo);
 	info = &sig_info[sig];
diff -urN linux-2.6.13-rc4/arch/um/kernel/time_kern.c linux-2.6.13-rc5/arch/um/kernel/time_kern.c
--- linux-2.6.13-rc4/arch/um/kernel/time_kern.c	2005-08-01 22:29:03.248266682 -0700
+++ linux-2.6.13-rc5/arch/um/kernel/time_kern.c	2005-08-01 22:29:10.242574091 -0700
@@ -137,7 +137,10 @@
 void timer_handler(int sig, union uml_pt_regs *regs)
 {
 	local_irq_disable();
-	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)), (regs)->skas.is_user));
+	irq_enter();
+	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)),
+					 (regs)->skas.is_user));
+	irq_exit();
 	local_irq_enable();
 	if(current_thread->cpu == 0)
 		timer_irq(regs);
diff -urN linux-2.6.13-rc4/arch/um/os-Linux/elf_aux.c linux-2.6.13-rc5/arch/um/os-Linux/elf_aux.c
--- linux-2.6.13-rc4/arch/um/os-Linux/elf_aux.c	2005-08-01 22:29:03.255266990 -0700
+++ linux-2.6.13-rc5/arch/um/os-Linux/elf_aux.c	2005-08-01 22:29:10.249574399 -0700
@@ -9,9 +9,10 @@
  */
 #include <elf.h>
 #include <stddef.h>
+#include <asm/elf.h>
 #include "init.h"
 #include "elf_user.h"
-#include <asm/elf.h>
+#include "mem_user.h"
 
 #if ELF_CLASS == ELFCLASS32
 typedef Elf32_auxv_t elf_auxv_t;
@@ -41,6 +42,9 @@
 				break;
 			case AT_SYSINFO_EHDR:
 				vsyscall_ehdr = auxv->a_un.a_val;
+				/* See if the page is under TASK_SIZE */
+				if (vsyscall_ehdr < (unsigned long) envp)
+					vsyscall_ehdr = 0;
 				break;
 			case AT_HWCAP:
 				elf_aux_hwcap = auxv->a_un.a_val;
diff -urN linux-2.6.13-rc4/arch/um/os-Linux/user_syms.c linux-2.6.13-rc5/arch/um/os-Linux/user_syms.c
--- linux-2.6.13-rc4/arch/um/os-Linux/user_syms.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/um/os-Linux/user_syms.c	2005-08-01 22:29:10.249574399 -0700
@@ -83,6 +83,9 @@
 
 EXPORT_SYMBOL_PROTO(getuid);
 
+EXPORT_SYMBOL_PROTO(fsync);
+EXPORT_SYMBOL_PROTO(fdatasync);
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically
diff -urN linux-2.6.13-rc4/arch/um/sys-i386/stub_segv.c linux-2.6.13-rc5/arch/um/sys-i386/stub_segv.c
--- linux-2.6.13-rc4/arch/um/sys-i386/stub_segv.c	2005-08-01 22:29:03.257267078 -0700
+++ linux-2.6.13-rc5/arch/um/sys-i386/stub_segv.c	2005-08-01 22:29:10.251574487 -0700
@@ -21,10 +21,10 @@
 	__asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
 	__asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
 		"int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Pop the frame pointer and return address since we need to leave
+	/* Load pointer to sigcontext into esp, since we need to leave
 	 * the stack in its original form when we do the sigreturn here, by
 	 * hand.
 	 */
-	__asm__("popl %%eax ; popl %%eax ; popl %%eax ; movl %0, %%eax ; "
-		"int $0x80" : : "g" (__NR_sigreturn));
+	__asm__("mov %0,%%esp ; movl %1, %%eax ; "
+		"int $0x80" : : "a" (sc), "g" (__NR_sigreturn));
 }
diff -urN linux-2.6.13-rc4/arch/x86_64/Kconfig linux-2.6.13-rc5/arch/x86_64/Kconfig
--- linux-2.6.13-rc4/arch/x86_64/Kconfig	2005-08-01 22:29:03.265267429 -0700
+++ linux-2.6.13-rc5/arch/x86_64/Kconfig	2005-08-01 22:29:10.259574838 -0700
@@ -329,12 +329,15 @@
 
 config GART_IOMMU
 	bool "IOMMU support"
+	default y
 	depends on PCI
 	help
-	  Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
+	  Support the IOMMU. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC (Double Address
 	  Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
 	  Normally the kernel will take the right choice by itself.
+	  This option includes a driver for the AMD Opteron/Athlon64 IOMMU
+	  and a software emulation used on some other systems.
 	  If unsure, say Y.
 
 # need this always enabled with GART_IOMMU for the VIA workaround
diff -urN linux-2.6.13-rc4/arch/x86_64/Makefile linux-2.6.13-rc5/arch/x86_64/Makefile
--- linux-2.6.13-rc4/arch/x86_64/Makefile	2005-08-01 22:29:03.266267473 -0700
+++ linux-2.6.13-rc5/arch/x86_64/Makefile	2005-08-01 22:29:10.259574838 -0700
@@ -21,18 +21,6 @@
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
-#
-# early bootup linking needs 32bit. You can either use real 32bit tools
-# here or 64bit tools in 32bit mode.
-#
-IA32_CC := $(CC) $(CPPFLAGS) -m32 -O2 -fomit-frame-pointer
-IA32_LD := $(LD) -m elf_i386
-IA32_AS := $(CC) $(AFLAGS) -m32 -Wa,--32 -traditional -c
-IA32_OBJCOPY := $(CROSS_COMPILE)objcopy
-IA32_CPP := $(CROSS_COMPILE)gcc -m32 -E
-export IA32_CC IA32_LD IA32_AS IA32_OBJCOPY IA32_CPP
-
-
 LDFLAGS		:= -m elf_x86_64
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=
diff -urN linux-2.6.13-rc4/arch/x86_64/defconfig linux-2.6.13-rc5/arch/x86_64/defconfig
--- linux-2.6.13-rc4/arch/x86_64/defconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/defconfig	2005-08-01 22:29:10.264575058 -0700
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Fri May 13 06:39:11 2005
+# Linux kernel version: 2.6.13-rc3
+# Fri Jul 22 16:47:31 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -84,14 +84,27 @@
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_MTRR=y
 CONFIG_SMP=y
-# CONFIG_PREEMPT is not set
 CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 CONFIG_K8_NUMA=y
 # CONFIG_NUMA_EMU is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_NUMA=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_DEC_LOCK=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=32
 CONFIG_HPET_TIMER=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -99,7 +112,13 @@
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ISA_DMA_API=y
@@ -118,12 +137,11 @@
 CONFIG_ACPI=y
 CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 # CONFIG_ACPI_VIDEO is not set
+CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
@@ -154,6 +172,7 @@
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 
 #
 # CPUFreq processor drivers
@@ -204,6 +223,76 @@
 CONFIG_UID16=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -308,6 +397,7 @@
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
@@ -338,6 +428,7 @@
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -372,7 +463,6 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_NV is not set
@@ -410,14 +500,21 @@
 #
 # Multi-device support (RAID and LVM)
 #
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -430,75 +527,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -517,7 +547,9 @@
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
 
 #
 # Tulip family network device support
@@ -532,7 +564,7 @@
 CONFIG_FORCEDETH=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
+CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -553,14 +585,15 @@
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -647,7 +680,6 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -716,6 +748,7 @@
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -723,6 +756,12 @@
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 # CONFIG_IBM_ASM is not set
@@ -808,6 +847,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -846,12 +886,15 @@
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -902,10 +945,11 @@
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -924,6 +968,10 @@
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
@@ -935,6 +983,7 @@
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -957,6 +1006,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -986,7 +1036,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -1016,15 +1065,18 @@
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
diff -urN linux-2.6.13-rc4/arch/x86_64/ia32/Makefile linux-2.6.13-rc5/arch/x86_64/ia32/Makefile
--- linux-2.6.13-rc4/arch/x86_64/ia32/Makefile	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/ia32/Makefile	2005-08-01 22:29:10.264575058 -0700
@@ -4,14 +4,14 @@
 
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
 	ia32_signal.o tls32.o \
-	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o
+	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
-$(obj)/syscall32.o: $(src)/syscall32.c \
+$(obj)/syscall32_syscall.o: \
 	$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
 
 # Teach kbuild about targets
diff -urN linux-2.6.13-rc4/arch/x86_64/ia32/syscall32.c linux-2.6.13-rc5/arch/x86_64/ia32/syscall32.c
--- linux-2.6.13-rc4/arch/x86_64/ia32/syscall32.c	2005-08-01 22:29:03.271267693 -0700
+++ linux-2.6.13-rc5/arch/x86_64/ia32/syscall32.c	2005-08-01 22:29:10.267575190 -0700
@@ -14,16 +14,6 @@
 #include <asm/tlbflush.h>
 #include <asm/ia32_unistd.h>
 
-/* 32bit VDSOs mapped into user space. */ 
-asm(".section \".init.data\",\"aw\"\n"
-    "syscall32_syscall:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n"
-    "syscall32_syscall_end:\n"
-    "syscall32_sysenter:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n"
-    "syscall32_sysenter_end:\n"
-    ".previous");
-
 extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
 extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
 extern int sysctl_vsyscall32;
diff -urN linux-2.6.13-rc4/arch/x86_64/ia32/syscall32_syscall.S linux-2.6.13-rc5/arch/x86_64/ia32/syscall32_syscall.S
--- linux-2.6.13-rc4/arch/x86_64/ia32/syscall32_syscall.S	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/arch/x86_64/ia32/syscall32_syscall.S	2005-08-01 22:29:10.267575190 -0700
@@ -0,0 +1,17 @@
+/* 32bit VDSOs mapped into user space. */
+
+	.section ".init.data","aw"
+
+	.globl syscall32_syscall
+	.globl syscall32_syscall_end
+
+syscall32_syscall:
+	.incbin "arch/x86_64/ia32/vsyscall-syscall.so"
+syscall32_syscall_end:
+
+	.globl syscall32_sysenter
+	.globl syscall32_sysenter_end
+
+syscall32_sysenter:
+	.incbin "arch/x86_64/ia32/vsyscall-sysenter.so"
+syscall32_sysenter_end:
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/entry.S linux-2.6.13-rc5/arch/x86_64/kernel/entry.S
--- linux-2.6.13-rc4/arch/x86_64/kernel/entry.S	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/entry.S	2005-08-01 22:29:10.270575322 -0700
@@ -76,7 +76,7 @@
 
 	.macro FAKE_STACK_FRAME child_rip
 	/* push in order ss, rsp, eflags, cs, rip */
-	xorq %rax, %rax
+	xorl %eax, %eax
 	pushq %rax /* ss */
 	CFI_ADJUST_CFA_OFFSET	8
 	pushq %rax /* rsp */
@@ -423,7 +423,7 @@
 	testl $3,CS(%rdi)
 	je 1f
 	swapgs	
-1:	addl $1,%gs:pda_irqcount	# RED-PEN should check preempt count
+1:	incl	%gs:pda_irqcount	# RED-PEN should check preempt count
 	movq %gs:pda_irqstackptr,%rax
 	cmoveq %rax,%rsp							
 	pushq %rdi			# save old stack	
@@ -436,7 +436,7 @@
 ret_from_intr:		
 	popq  %rdi
 	cli	
-	subl $1,%gs:pda_irqcount
+	decl %gs:pda_irqcount
 #ifdef CONFIG_DEBUG_INFO
 	movq RBP(%rdi),%rbp
 #endif
@@ -494,7 +494,7 @@
 	sti
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
-	xorq %rsi,%rsi		# oldset
+	xorl %esi,%esi		# oldset
 	movq %rsp,%rdi		# &pt_regs
 	call do_notify_resume
 	RESTORE_REST
@@ -752,7 +752,7 @@
 	movq %rsi, %rdi
 	call *%rax
 	# exit
-	xorq %rdi, %rdi
+	xorl %edi, %edi
 	call do_exit
 
 /*
@@ -918,3 +918,15 @@
 ENTRY(call_debug)
        zeroentry do_call_debug
 
+ENTRY(call_softirq)
+	movq %gs:pda_irqstackptr,%rax
+	pushq %r15
+	movq %rsp,%r15
+	incl %gs:pda_irqcount
+	cmove %rax,%rsp
+	call __do_softirq
+	movq %r15,%rsp
+	decl %gs:pda_irqcount
+	popq %r15
+	ret
+
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/genapic.c linux-2.6.13-rc5/arch/x86_64/kernel/genapic.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/genapic.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/genapic.c	2005-08-01 22:29:10.270575322 -0700
@@ -31,6 +31,7 @@
 
 extern struct genapic apic_cluster;
 extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
 
 struct genapic *genapic = &apic_flat;
 
@@ -44,12 +45,7 @@
 	u8 clusters, max_cluster;
 	u8 id;
 	u8 cluster_cnt[NUM_APIC_CLUSTERS];
-
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-		/* AMD always uses flat mode right now */
-		genapic = &apic_flat;
-		goto print;
-	}
+	int num_cpus = 0;
 
 #if defined(CONFIG_ACPI_BUS)
 	/*
@@ -64,15 +60,34 @@
 #endif
 
 	memset(cluster_cnt, 0, sizeof(cluster_cnt));
-
 	for (i = 0; i < NR_CPUS; i++) {
 		id = bios_cpu_apicid[i];
-		if (id != BAD_APICID)
-			cluster_cnt[APIC_CLUSTERID(id)]++;
+		if (id == BAD_APICID)
+			continue;
+		num_cpus++;
+		cluster_cnt[APIC_CLUSTERID(id)]++;
 	}
 
+	/* Don't use clustered mode on AMD platforms. */
+ 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+		genapic = &apic_physflat;
+#ifndef CONFIG_CPU_HOTPLUG
+		/* In the CPU hotplug case we cannot use broadcast mode
+		   because that opens a race when a CPU is removed.
+		   Stay at physflat mode in this case.
+		   It is bad to do this unconditionally though. Once
+		   we have ACPI platform support for CPU hotplug
+		   we should detect hotplug capablity from ACPI tables and
+		   only do this when really needed. -AK */
+		if (num_cpus <= 8)
+			genapic = &apic_flat;
+#endif
+ 		goto print;
+ 	}
+
 	clusters = 0;
 	max_cluster = 0;
+
 	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
 		if (cluster_cnt[i] > 0) {
 			++clusters;
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/genapic_flat.c linux-2.6.13-rc5/arch/x86_64/kernel/genapic_flat.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/genapic_flat.c	2005-08-01 22:29:03.274267825 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/genapic_flat.c	2005-08-01 22:29:10.271575366 -0700
@@ -2,13 +2,11 @@
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
  *
- * Flat APIC subarch code.  Maximum 8 CPUs, logical delivery.
+ * Flat APIC subarch code.
  *
  * Hacked for x86-64 by James Cleverdon from i386 architecture code by
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
- * Ashok Raj <ashok.raj@intel.com>
- * 	Removed IPI broadcast shortcut to support CPU hotplug
  */
 #include <linux/config.h>
 #include <linux/threads.h>
@@ -20,47 +18,6 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 
-/*
- * The following permit choosing broadcast IPI shortcut v.s sending IPI only
- * to online cpus via the send_IPI_mask varient.
- * The mask version is my preferred option, since it eliminates a lot of
- * other extra code that would need to be written to cleanup intrs sent
- * to a CPU while offline.
- *
- * Sending broadcast introduces lots of trouble in CPU hotplug situations.
- * These IPI's are delivered to cpu's irrespective of their offline status
- * and could pickup stale intr data when these CPUS are turned online.
- *
- * Not using broadcast is a cleaner approach IMO, but Andi Kleen disagrees with
- * the idea of not using broadcast IPI's anymore. Hence the run time check
- * is introduced, on his request so we can choose an alternate mechanism.
- *
- * Initial wacky performance tests that collect cycle counts show
- * no increase in using mask v.s broadcast version. In fact they seem
- * identical in terms of cycle counts.
- *
- * if we need to use broadcast, we need to do the following.
- *
- * cli;
- * hold call_lock;
- * clear any pending IPI, just ack and clear all pending intr
- * set cpu_online_map;
- * release call_lock;
- * sti;
- *
- * The complicated dummy irq processing shown above is not required if
- * we didnt sent IPI's to wrong CPU's in the first place.
- *
- * - Ashok Raj <ashok.raj@intel.com>
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-static int no_broadcast=DEFAULT_SEND_IPI;
-
 static cpumask_t flat_target_cpus(void)
 {
 	return cpu_online_map;
@@ -119,37 +76,15 @@
 	local_irq_restore(flags);
 }
 
-static inline void __local_flat_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast) {
-		cpumask_t mask = cpu_online_map;
-		int this_cpu = get_cpu();
-
-		cpu_clear(this_cpu, mask);
-		flat_send_IPI_mask(mask, vector);
-		put_cpu();
-	}
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, APIC_DEST_LOGICAL);
-}
-
-static inline void __local_flat_send_IPI_all(int vector)
-{
-	if (no_broadcast)
-		flat_send_IPI_mask(cpu_online_map, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
-}
-
 static void flat_send_IPI_allbutself(int vector)
 {
 	if (((num_online_cpus()) - 1) >= 1)
-		__local_flat_send_IPI_allbutself(vector);
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
 }
 
 static void flat_send_IPI_all(int vector)
 {
-	__local_flat_send_IPI_all(vector);
+	__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 }
 
 static int flat_apic_id_registered(void)
@@ -170,16 +105,6 @@
 	return ((ebx >> 24) & 0xFF) >> index_msb;
 }
 
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
-											"IPI Broadcast");
-	return 1;
-}
-
-__setup("no_ipi_broadcast", no_ipi_broadcast);
-
 struct genapic apic_flat =  {
 	.name = "flat",
 	.int_delivery_mode = dest_LowestPrio,
@@ -195,11 +120,62 @@
 	.phys_pkg_id = phys_pkg_id,
 };
 
-static int __init print_ipi_mode(void)
+/*
+ * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * We cannot use logical delivery in this case because the mask
+ * overflows, so use physical mode.
+ */
+
+static cpumask_t physflat_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
+{
+	send_IPI_mask_sequence(cpumask, vector);
+}
+
+static void physflat_send_IPI_allbutself(int vector)
+{
+	cpumask_t allbutme = cpu_online_map;
+	int me = get_cpu();
+	cpu_clear(me, allbutme);
+	physflat_send_IPI_mask(allbutme, vector);
+	put_cpu();
+}
+
+static void physflat_send_IPI_all(int vector)
 {
-	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
-											"Shortcut");
-	return 0;
+	physflat_send_IPI_mask(cpu_online_map, vector);
 }
 
-late_initcall(print_ipi_mode);
+static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return x86_cpu_to_apicid[cpu];
+	else
+		return BAD_APICID;
+}
+
+struct genapic apic_physflat =  {
+	.name = "physical flat",
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_LOWEST,
+	.target_cpus = physflat_target_cpus,
+	.apic_id_registered = flat_apic_id_registered,
+	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
+	.send_IPI_all = physflat_send_IPI_all,
+	.send_IPI_allbutself = physflat_send_IPI_allbutself,
+	.send_IPI_mask = physflat_send_IPI_mask,
+	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+};
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/head.S linux-2.6.13-rc5/arch/x86_64/kernel/head.S
--- linux-2.6.13-rc4/arch/x86_64/kernel/head.S	2005-08-01 22:29:03.274267825 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/head.S	2005-08-01 22:29:10.271575366 -0700
@@ -137,14 +137,14 @@
 	wrmsr
 
 	/* Setup cr0 */
-	xorq	%rax, %rax
-	btsq	$31, %rax			/* Enable paging */
-	btsq	$0, %rax			/* Enable protected mode */
-	btsq	$1, %rax			/* Enable MP */
-	btsq	$4, %rax			/* Enable ET */
-	btsq	$5, %rax			/* Enable NE */
-	btsq	$16, %rax			/* Enable WP */
-	btsq	$18, %rax			/* Enable AM */
+#define CR0_PM				1		/* protected mode */
+#define CR0_MP				(1<<1)
+#define CR0_ET				(1<<4)
+#define CR0_NE				(1<<5)
+#define CR0_WP				(1<<16)
+#define CR0_AM				(1<<18)
+#define CR0_PAGING 			(1<<31)
+	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
 	/* Make changes effective */
 	movq	%rax, %cr0
 
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/irq.c linux-2.6.13-rc5/arch/x86_64/kernel/irq.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/irq.c	2005-08-01 22:29:03.277267957 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/irq.c	2005-08-01 22:29:10.273575454 -0700
@@ -135,3 +135,22 @@
 	local_irq_disable();
 }
 #endif
+
+extern void call_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ 	__u32 pending;
+ 	unsigned long flags;
+
+ 	if (in_interrupt())
+ 		return;
+
+ 	local_irq_save(flags);
+ 	pending = local_softirq_pending();
+ 	/* Switch to interrupt stack */
+ 	if (pending)
+		call_softirq();
+ 	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/machine_kexec.c linux-2.6.13-rc5/arch/x86_64/kernel/machine_kexec.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/machine_kexec.c	2005-08-01 22:29:03.278268001 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/machine_kexec.c	2005-08-01 22:29:10.275575542 -0700
@@ -8,43 +8,26 @@
 
 #include <linux/mm.h>
 #include <linux/kexec.h>
-#include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/reboot.h>
-#include <asm/pda.h>
 #include <asm/pgtable.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/cpufeature.h>
-#include <asm/hw_irq.h>
-
-#define LEVEL0_SIZE (1UL << 12UL)
-#define LEVEL1_SIZE (1UL << 21UL)
-#define LEVEL2_SIZE (1UL << 30UL)
-#define LEVEL3_SIZE (1UL << 39UL)
-#define LEVEL4_SIZE (1UL << 48UL)
-
-#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE)
-#define L2_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L3_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
-static void init_level2_page(u64 *level2p, unsigned long addr)
+static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
 	unsigned long end_addr;
 
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL2_SIZE;
+	end_addr = addr + PUD_SIZE;
 	while (addr < end_addr) {
-		*(level2p++) = addr | L1_ATTR;
-		addr += LEVEL1_SIZE;
+		set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
+		addr += PMD_SIZE;
 	}
 }
 
-static int init_level3_page(struct kimage *image, u64 *level3p,
+static int init_level3_page(struct kimage *image, pud_t *level3p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -52,32 +35,32 @@
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL3_SIZE;
+	end_addr = addr + PGDIR_SIZE;
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level2p;
+		pmd_t *level2p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level2p = (u64 *)page_address(page);
+		level2p = (pmd_t *)page_address(page);
 		init_level2_page(level2p, addr);
-		*(level3p++) = __pa(level2p) | L2_ATTR;
-		addr += LEVEL2_SIZE;
+		set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE));
+		addr += PUD_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level3p++) = 0;
-		addr += LEVEL2_SIZE;
+		pud_clear(level3p++);
+		addr += PUD_SIZE;
 	}
 out:
 	return result;
 }
 
 
-static int init_level4_page(struct kimage *image, u64 *level4p,
+static int init_level4_page(struct kimage *image, pgd_t *level4p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -85,28 +68,28 @@
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL4_SIZE;
+	end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE);
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level3p;
+		pud_t *level3p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level3p = (u64 *)page_address(page);
+		level3p = (pud_t *)page_address(page);
 		result = init_level3_page(image, level3p, addr, last_addr);
 		if (result) {
 			goto out;
 		}
-		*(level4p++) = __pa(level3p) | L3_ATTR;
-		addr += LEVEL3_SIZE;
+		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
+		addr += PGDIR_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level4p++) = 0;
-		addr += LEVEL3_SIZE;
+		pgd_clear(level4p++);
+		addr += PGDIR_SIZE;
 	}
 out:
 	return result;
@@ -115,52 +98,50 @@
 
 static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
-	u64 *level4p;
-	level4p = (u64 *)__va(start_pgtable);
+	pgd_t *level4p;
+	level4p = (pgd_t *)__va(start_pgtable);
  	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
 }
 
 static void set_idt(void *newidt, u16 limit)
 {
-	unsigned char curidt[10];
+	struct desc_ptr curidt;
 
 	/* x86-64 supports unaliged loads & stores */
-	(*(u16 *)(curidt)) = limit;
-	(*(u64 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtq %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, u16 limit)
 {
-	unsigned char curgdt[10];
+	struct desc_ptr curgdt;
 
 	/* x86-64 supports unaligned loads & stores */
-	(*(u16 *)(curgdt)) = limit;
-	(*(u64 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtq %0\n"
+		: : "m" (curgdt)
 		);
 };
 
 static void load_segments(void)
 {
 	__asm__ __volatile__ (
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%ss\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
+		"\tmovl %0,%%ds\n"
+		"\tmovl %0,%%es\n"
+		"\tmovl %0,%%ss\n"
+		"\tmovl %0,%%fs\n"
+		"\tmovl %0,%%gs\n"
+		: : "a" (__KERNEL_DS)
 		);
-#undef STR
-#undef __STR
 }
 
 typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page,
@@ -178,7 +159,7 @@
 
 	/* Calculate the offsets */
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Setup the identity mapped 64bit page table */
 	result = init_pgtable(image, start_pgtable);
@@ -214,7 +195,7 @@
 	/* Calculate the offsets */
 	page_list = image->head;
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Set the low half of the page table to my identity mapped
 	 * page table for kexec.  Leave the high half pointing at the
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/mce.c linux-2.6.13-rc5/arch/x86_64/kernel/mce.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/mce.c	2005-08-01 22:29:03.279268045 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/mce.c	2005-08-01 22:29:10.276575586 -0700
@@ -15,6 +15,8 @@
 #include <linux/sysdev.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
 #include <asm/processor.h> 
 #include <asm/msr.h>
 #include <asm/mce.h>
@@ -514,10 +516,7 @@
 	set_kset_name("machinecheck"),
 };
 
-static struct sys_device device_mce = {
-	.id	= 0,
-	.cls	= &mce_sysclass,
-};
+static DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -542,27 +541,83 @@
 ACCESSOR(tolerant,tolerant,)
 ACCESSOR(check_interval,check_interval,mce_restart())
 
-static __cpuinit int mce_init_device(void)
+/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
+static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
+	if (!mce_available(&cpu_data[cpu]))
+		return -EIO;
+
+	per_cpu(device_mce,cpu).id = cpu;
+	per_cpu(device_mce,cpu).cls = &mce_sysclass;
+
+	err = sysdev_register(&per_cpu(device_mce,cpu));
+
+	if (!err) {
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	}
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	sysdev_unregister(&per_cpu(device_mce,cpu));
+}
+#endif
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static __cpuinit int
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		mce_create_device(cpu);
+		break;
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DEAD:
+		mce_remove_device(cpu);
+		break;
+#endif
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier = {
+	.notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_device(void)
+{
+	int err;
+	int i = 0;
+
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 	err = sysdev_class_register(&mce_sysclass);
-	if (!err)
-		err = sysdev_register(&device_mce);
-	if (!err) { 
-		/* could create per CPU objects, but it is not worth it. */
-		sysdev_create_file(&device_mce, &attr_bank0ctl); 
-		sysdev_create_file(&device_mce, &attr_bank1ctl); 
-		sysdev_create_file(&device_mce, &attr_bank2ctl); 
-		sysdev_create_file(&device_mce, &attr_bank3ctl); 
-		sysdev_create_file(&device_mce, &attr_bank4ctl); 
-		sysdev_create_file(&device_mce, &attr_tolerant); 
-		sysdev_create_file(&device_mce, &attr_check_interval);
-	} 
-	
+
+	for_each_online_cpu(i) {
+		mce_create_device(i);
+	}
+
+	register_cpu_notifier(&mce_cpu_notifier);
 	misc_register(&mce_log_device);
 	return err;
-
 }
+
 device_initcall(mce_init_device);
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/mpparse.c linux-2.6.13-rc5/arch/x86_64/kernel/mpparse.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/mpparse.c	2005-08-01 22:29:03.279268045 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/mpparse.c	2005-08-01 22:29:10.277575629 -0700
@@ -109,7 +109,7 @@
 
 static void __init MP_processor_info (struct mpc_config_processor *m)
 {
-	int ver;
+	int ver, cpu;
 	static int found_bsp=0;
 
 	if (!(m->mpc_cpuflag & CPU_ENABLED))
@@ -131,7 +131,7 @@
 		return;
 	}
 
-	num_processors++;
+	cpu = num_processors++;
 
 	if (m->mpc_apicid > MAX_APICS) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
@@ -155,13 +155,18 @@
  		 * in same order as logical cpu numbers. Hence the first
  		 * entry is BSP, and so on.
  		 */
+		cpu = 0;
+
  		bios_cpu_apicid[0] = m->mpc_apicid;
  		x86_cpu_to_apicid[0] = m->mpc_apicid;
  		found_bsp = 1;
- 	} else {
- 		bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 		x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 	}
+ 	} else
+		cpu = num_processors - found_bsp;
+	bios_cpu_apicid[cpu] = m->mpc_apicid;
+	x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)
@@ -965,8 +970,21 @@
 		 * due to unused I/O APIC pins.
 		 */
 		int irq = gsi;
-		gsi = pci_irq++;
-		gsi_to_irq[irq] = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			if (gsi > 15)
+				gsi = pci_irq++;
+#ifdef CONFIG_ACPI_BUS
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_fadt.sci_int)
+				gsi = pci_irq++;
+#endif
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/setup.c linux-2.6.13-rc5/arch/x86_64/kernel/setup.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/setup.c	2005-08-01 22:29:03.283268220 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/setup.c	2005-08-01 22:29:10.280575761 -0700
@@ -765,8 +765,6 @@
 	int cpu = smp_processor_id();
 	int node = 0;
 	unsigned bits;
-	if (c->x86_num_cores == 1)
-		return;
 
 	bits = 0;
 	while ((1 << bits) < c->x86_num_cores)
@@ -1081,8 +1079,7 @@
 	else
 		mtrr_ap_init();
 #ifdef CONFIG_NUMA
-	if (c != &boot_cpu_data)
-		numa_add_cpu(c - cpu_data);
+	numa_add_cpu(smp_processor_id());
 #endif
 }
  
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/setup64.c linux-2.6.13-rc5/arch/x86_64/kernel/setup64.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/setup64.c	2005-08-01 22:29:03.283268220 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/setup64.c	2005-08-01 22:29:10.280575761 -0700
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <asm/bootsetup.h>
 #include <asm/pda.h>
 #include <asm/pgtable.h>
@@ -22,10 +23,8 @@
 #include <asm/smp.h>
 #include <asm/i387.h>
 #include <asm/percpu.h>
-#include <asm/mtrr.h>
 #include <asm/proto.h>
-#include <asm/mman.h>
-#include <asm/numa.h>
+#include <asm/sections.h>
 
 char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
 
@@ -33,11 +32,6 @@
 
 struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; 
 
-extern struct task_struct init_task;
-
-extern unsigned char __per_cpu_start[], __per_cpu_end[]; 
-
-extern struct desc_ptr cpu_gdt_descr[];
 struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; 
 
 char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
@@ -101,7 +95,7 @@
 #endif
 
 	for (i = 0; i < NR_CPUS; i++) { 
-		unsigned char *ptr;
+		char *ptr;
 
 		if (!NODE_DATA(cpu_to_node(i))) {
 			printk("cpu with no node %d, num_online_nodes %d\n",
@@ -190,11 +184,7 @@
  */
 void __cpuinit cpu_init (void)
 {
-#ifdef CONFIG_SMP
 	int cpu = stack_smp_processor_id();
-#else
-	int cpu = smp_processor_id();
-#endif
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	unsigned long v; 
 	char *estacks = NULL; 
@@ -214,7 +204,7 @@
 
 	printk("Initializing CPU#%d\n", cpu);
 
-		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/smp.c linux-2.6.13-rc5/arch/x86_64/kernel/smp.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/smp.c	2005-08-01 22:29:03.284268264 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/smp.c	2005-08-01 22:29:10.281575805 -0700
@@ -129,10 +129,9 @@
 		} else
 			leave_mm(cpu);
 	}
+out:
 	ack_APIC_irq();
 	cpu_clear(cpu, flush_cpumask);
-
-out:
 	put_cpu_no_resched();
 }
 
@@ -294,6 +293,69 @@
 }
 
 /*
+ * this function sends a 'generic call function' IPI to one other CPU
+ * in the system.
+ */
+static void __smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+				int nonatomic, int wait)
+{
+	struct call_data_struct data;
+	int cpus = 1;
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	wmb();
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (!wait)
+		return;
+
+	while (atomic_read(&data.finished) != cpus)
+		cpu_relax();
+}
+
+/*
+ * smp_call_function_single - Run a function on another CPU
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Currently unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Retrurns 0 on success, else a negative status code.
+ *
+ * Does not return until the remote CPU is nearly ready to execute <func>
+ * or is or has executed.
+ */
+
+int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+	int nonatomic, int wait)
+{
+	/* prevent preemption and reschedule on another processor */
+	int me = get_cpu();
+	if (cpu == me) {
+		WARN_ON(1);
+		put_cpu();
+		return -EBUSY;
+	}
+	spin_lock_bh(&call_lock);
+	__smp_call_function_single(cpu, func, info, nonatomic, wait);
+	spin_unlock_bh(&call_lock);
+	put_cpu();
+	return 0;
+}
+
+/*
  * this function sends a 'generic call function' IPI to all other CPUs
  * in the system.
  */
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/smpboot.c linux-2.6.13-rc5/arch/x86_64/kernel/smpboot.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/smpboot.c	2005-08-01 22:29:03.285268308 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/smpboot.c	2005-08-01 22:29:10.283575893 -0700
@@ -113,24 +113,6 @@
 #define set_idle_for_cpu(x,p)   (idle_thread_array[(x)] = (p))
 
 /*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * If cpu-hotplug is supported, then we need to preallocate for all
- * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
- * - Ashok Raj
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define fixup_cpu_possible_map(x)	cpu_set((x), cpu_possible_map)
-#else
-#define fixup_cpu_possible_map(x)
-#endif
-
-/*
  * Currently trivial. Write the real->protected mode
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
@@ -229,9 +211,6 @@
 {
 	unsigned long flags, i;
 
-	if (smp_processor_id() != 0)
-		return;
-
 	go[MASTER] = 0;
 
 	local_irq_save(flags);
@@ -280,7 +259,7 @@
 	return tcenter - best_tm;
 }
 
-static __cpuinit void sync_tsc(void)
+static __cpuinit void sync_tsc(unsigned int master)
 {
 	int i, done = 0;
 	long delta, adj, adjust_latency = 0;
@@ -294,9 +273,17 @@
 	} t[NUM_ROUNDS] __cpuinitdata;
 #endif
 
+	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n",
+		smp_processor_id(), master);
+
 	go[MASTER] = 1;
 
-	smp_call_function(sync_master, NULL, 1, 0);
+	/* It is dangerous to broadcast IPI as cpus are coming up,
+	 * as they may not be ready to accept them.  So since
+	 * we only need to send the ipi to the boot cpu direct
+	 * the message, and avoid the race.
+	 */
+	smp_call_function_single(master, sync_master, NULL, 1, 0);
 
 	while (go[MASTER])	/* wait for master to be ready */
 		no_cpu_relax();
@@ -340,16 +327,14 @@
 	printk(KERN_INFO
 	       "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
 	       "maxerr %lu cycles)\n",
-	       smp_processor_id(), boot_cpu_id, delta, rt);
+	       smp_processor_id(), master, delta, rt);
 }
 
 static void __cpuinit tsc_sync_wait(void)
 {
 	if (notscsync || !cpu_has_tsc)
 		return;
-	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
-			boot_cpu_id);
-	sync_tsc();
+	sync_tsc(boot_cpu_id);
 }
 
 static __init int notscsync_setup(char *s)
@@ -773,8 +758,9 @@
 	initial_code = start_secondary;
 	clear_ti_thread_flag(c_idle.idle->thread_info, TIF_FORK);
 
-	printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid,
-	       start_rip, init_rsp);
+	printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
+		cpus_weight(cpu_present_map),
+		apicid);
 
 	/*
 	 * This grunge runs the startup process for
@@ -924,6 +910,27 @@
 	}
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * If cpu-hotplug is supported, then we need to preallocate for all
+ * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
+ * - Ashok Raj
+ */
+static void prefill_possible_map(void)
+{
+	int i;
+	for (i = 0; i < NR_CPUS; i++)
+		cpu_set(i, cpu_possible_map);
+}
+#endif
+
 /*
  * Various sanity checks.
  */
@@ -987,25 +994,15 @@
  */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	nmi_watchdog_default();
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
 	enforce_max_cpus(max_cpus);
 
-	/*
-	 * Fill in cpu_present_mask
-	 */
-	for (i = 0; i < NR_CPUS; i++) {
-		int apicid = cpu_present_to_apicid(i);
-		if (physid_isset(apicid, phys_cpu_present_map)) {
-			cpu_set(i, cpu_present_map);
-			cpu_set(i, cpu_possible_map);
-		}
-		fixup_cpu_possible_map(i);
-	}
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
@@ -1189,8 +1186,7 @@
 			printk ("CPU %d is now offline\n", cpu);
 			return;
 		}
-		current->state = TASK_UNINTERRUPTIBLE;
-		schedule_timeout(HZ/10);
+		msleep(100);
 	}
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
diff -urN linux-2.6.13-rc4/arch/x86_64/kernel/traps.c linux-2.6.13-rc5/arch/x86_64/kernel/traps.c
--- linux-2.6.13-rc4/arch/x86_64/kernel/traps.c	2005-08-01 22:29:03.287268396 -0700
+++ linux-2.6.13-rc5/arch/x86_64/kernel/traps.c	2005-08-01 22:29:10.285575981 -0700
@@ -594,9 +594,6 @@
 	if (!cpu)
 		reason = get_nmi_reason();
 
-	if (!cpu_online(cpu))
-		return;
-
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT)
 								== NOTIFY_STOP)
diff -urN linux-2.6.13-rc4/arch/x86_64/lib/csum-copy.S linux-2.6.13-rc5/arch/x86_64/lib/csum-copy.S
--- linux-2.6.13-rc4/arch/x86_64/lib/csum-copy.S	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/lib/csum-copy.S	2005-08-01 22:29:10.286576025 -0700
@@ -188,8 +188,8 @@
 	source
 	movw (%rdi),%bx
 	adcl %ebx,%eax
-	dest
 	decl %ecx
+	dest
 	movw %bx,(%rsi)
 	leaq 2(%rdi),%rdi
 	leaq 2(%rsi),%rsi
diff -urN linux-2.6.13-rc4/arch/x86_64/lib/delay.c linux-2.6.13-rc5/arch/x86_64/lib/delay.c
--- linux-2.6.13-rc4/arch/x86_64/lib/delay.c	2005-08-01 22:29:03.288268440 -0700
+++ linux-2.6.13-rc5/arch/x86_64/lib/delay.c	2005-08-01 22:29:10.286576025 -0700
@@ -18,8 +18,6 @@
 #include <asm/smp.h>
 #endif
 
-int x86_udelay_tsc = 0;		/* Delay via TSC */
-
 int read_current_timer(unsigned long *timer_value)
 {
 	rdtscll(*timer_value);
diff -urN linux-2.6.13-rc4/arch/x86_64/mm/fault.c linux-2.6.13-rc5/arch/x86_64/mm/fault.c
--- linux-2.6.13-rc4/arch/x86_64/mm/fault.c	2005-08-01 22:29:03.289268484 -0700
+++ linux-2.6.13-rc5/arch/x86_64/mm/fault.c	2005-08-01 22:29:10.287576069 -0700
@@ -23,7 +23,6 @@
 #include <linux/vt_kern.h>		/* For unblank_screen() */
 #include <linux/compiler.h>
 #include <linux/module.h>
-#include <linux/kprobes.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
diff -urN linux-2.6.13-rc4/arch/x86_64/mm/numa.c linux-2.6.13-rc5/arch/x86_64/mm/numa.c
--- linux-2.6.13-rc4/arch/x86_64/mm/numa.c	2005-08-01 22:29:03.290268528 -0700
+++ linux-2.6.13-rc5/arch/x86_64/mm/numa.c	2005-08-01 22:29:10.288576113 -0700
@@ -36,34 +36,36 @@
 int __init compute_hash_shift(struct node *nodes, int numnodes)
 {
 	int i; 
-	int shift = 24;
-	u64 addr;
+	int shift = 20;
+	unsigned long addr,maxend=0;
 	
-	/* When in doubt use brute force. */
-	while (shift < 48) { 
-		memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); 
-		for (i = 0; i < numnodes; i++) {
-			if (nodes[i].start == nodes[i].end) 
-				continue;
-			for (addr = nodes[i].start; 
-			     addr < nodes[i].end; 
-			     addr += (1UL << shift)) {
-				if (memnodemap[addr >> shift] != 0xff && 
-				    memnodemap[addr >> shift] != i) { 
-					printk(KERN_INFO 
-					    "node %d shift %d addr %Lx conflict %d\n", 
-					       i, shift, addr, memnodemap[addr>>shift]);
-					goto next; 
-				} 
-				memnodemap[addr >> shift] = i; 
+	for (i = 0; i < numnodes; i++)
+		if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend))
+				maxend = nodes[i].end;
+
+	while ((1UL << shift) <  (maxend / NODEMAPSIZE))
+		shift++;
+
+	printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n",
+			shift,maxend);
+	memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE);
+	for (i = 0; i < numnodes; i++) {
+		if (nodes[i].start == nodes[i].end)
+			continue;
+		for (addr = nodes[i].start;
+		     addr < nodes[i].end;
+		     addr += (1UL << shift)) {
+			if (memnodemap[addr >> shift] != 0xff) {
+				printk(KERN_INFO
+	"Your memory is not aligned you need to rebuild your kernel "
+	"with a bigger NODEMAPSIZE shift=%d adder=%lu\n",
+					shift,addr);
+				return -1;
 			} 
+			memnodemap[addr >> shift] = i;
 		} 
-		return shift; 
-	next:
-		shift++; 
 	} 
-	memset(memnodemap,0,sizeof(*memnodemap) * NODEMAPSIZE); 
-	return -1; 
+	return shift;
 }
 
 #ifdef CONFIG_SPARSEMEM
diff -urN linux-2.6.13-rc4/arch/x86_64/mm/srat.c linux-2.6.13-rc5/arch/x86_64/mm/srat.c
--- linux-2.6.13-rc4/arch/x86_64/mm/srat.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/arch/x86_64/mm/srat.c	2005-08-01 22:29:10.288576113 -0700
@@ -20,6 +20,9 @@
 
 static struct acpi_table_slit *acpi_slit;
 
+/* Internal processor count */
+static unsigned int __initdata num_processors = 0;
+
 static nodemask_t nodes_parsed __initdata;
 static nodemask_t nodes_found __initdata;
 static struct node nodes[MAX_NUMNODES] __initdata;
@@ -101,16 +104,18 @@
 		bad_srat();
 		return;
 	}
-	if (pa->apic_id >= NR_CPUS) {
-		printk(KERN_ERR "SRAT: lapic %u too large.\n",
-		       pa->apic_id);
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_ERR "SRAT: Processor #%d (lapic %u) INVALID. (Max ID: %d).\n",
+			num_processors, pa->apic_id, NR_CPUS);
 		bad_srat();
 		return;
 	}
-	cpu_to_node[pa->apic_id] = node;
+	cpu_to_node[num_processors] = node;
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
-	       pxm, pa->apic_id, node);
+	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> CPU %u -> Node %u\n",
+	       pxm, pa->apic_id, num_processors, node);
+
+	num_processors++;
 }
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
@@ -124,7 +129,6 @@
 
 	if (srat_disabled() || ma->flags.enabled == 0)
 		return;
-	/* hotplug bit is ignored for now */
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -134,6 +138,10 @@
 	}
 	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
 	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+	/* It is fine to add this area to the nodes data it will be used later*/
+	if (ma->flags.hot_pluggable == 1)
+		printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
+				start, end);
 	i = conflicting_nodes(start, end);
 	if (i >= 0) {
 		printk(KERN_ERR
diff -urN linux-2.6.13-rc4/arch/x86_64/pci/k8-bus.c linux-2.6.13-rc5/arch/x86_64/pci/k8-bus.c
--- linux-2.6.13-rc4/arch/x86_64/pci/k8-bus.c	2005-08-01 22:29:03.290268528 -0700
+++ linux-2.6.13-rc5/arch/x86_64/pci/k8-bus.c	2005-08-01 22:29:10.288576113 -0700
@@ -29,7 +29,7 @@
 fill_mp_bus_to_cpumask(void)
 {
 	struct pci_dev *nb_dev = NULL;
-	int i, j, printed;
+	int i, j;
 	u32 ldtbus, nid;
 	static int lbnr[3] = {
 		LDT_BUS_NUMBER_REGISTER_0,
diff -urN linux-2.6.13-rc4/drivers/acpi/ec.c linux-2.6.13-rc5/drivers/acpi/ec.c
--- linux-2.6.13-rc4/drivers/acpi/ec.c	2005-08-01 22:29:03.348271077 -0700
+++ linux-2.6.13-rc5/drivers/acpi/ec.c	2005-08-01 22:29:10.349578794 -0700
@@ -59,76 +59,185 @@
 #define ACPI_EC_DELAY		50	/* Wait 50ms max. during EC ops */
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 
+#define ACPI_EC_UDELAY         100     /* Poll @ 100us increments */
+#define ACPI_EC_UDELAY_COUNT   1000    /* Wait 10ms max. during EC ops */
+
 #define ACPI_EC_COMMAND_READ	0x80
 #define ACPI_EC_COMMAND_WRITE	0x81
 #define ACPI_EC_BURST_ENABLE	0x82
 #define ACPI_EC_BURST_DISABLE	0x83
 #define ACPI_EC_COMMAND_QUERY	0x84
 
-static int acpi_ec_add (struct acpi_device *device);
+#define EC_POLLING		0xFF
+#define EC_BURST		0x00
+
+
 static int acpi_ec_remove (struct acpi_device *device, int type);
 static int acpi_ec_start (struct acpi_device *device);
 static int acpi_ec_stop (struct acpi_device *device, int type);
+static int acpi_ec_burst_add ( struct acpi_device *device);
 
 static struct acpi_driver acpi_ec_driver = {
 	.name =		ACPI_EC_DRIVER_NAME,
 	.class =	ACPI_EC_CLASS,
 	.ids =		ACPI_EC_HID,
 	.ops =		{
-				.add =		acpi_ec_add,
+				.add =		acpi_ec_burst_add,
 				.remove =	acpi_ec_remove,
 				.start =	acpi_ec_start,
 				.stop =		acpi_ec_stop,
 			},
 };
-
-struct acpi_ec {
-	acpi_handle			handle;
-	unsigned long			uid;
-	unsigned long			gpe_bit;
-	struct acpi_generic_address	status_addr;
-	struct acpi_generic_address	command_addr;
-	struct acpi_generic_address	data_addr;
-	unsigned long			global_lock;
-	unsigned int			expect_event;
-	atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
-	atomic_t			pending_gpe;
-	struct semaphore		sem;
-	wait_queue_head_t		wait;
+union acpi_ec {
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+	} common;
+
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+		unsigned int			expect_event;
+		atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
+		atomic_t			pending_gpe;
+		struct semaphore		sem;
+		wait_queue_head_t		wait;
+	}burst;
+
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+       		spinlock_t                      lock;
+	}polling;
 };
 
+static int acpi_ec_polling_wait ( union acpi_ec *ec, u8 event); 
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event);
+static int acpi_ec_polling_read ( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_burst_read( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_polling_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_burst_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_polling_query ( union acpi_ec *ec, u32 *data);
+static int acpi_ec_burst_query ( union acpi_ec *ec, u32 *data);
+static void acpi_ec_gpe_polling_query ( void *ec_cxt);
+static void acpi_ec_gpe_burst_query ( void *ec_cxt);
+static u32 acpi_ec_gpe_polling_handler ( void *data);
+static u32 acpi_ec_gpe_burst_handler ( void *data);
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void);
+static int __init
+acpi_ec_burst_get_real_ecdt(void);
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
-static struct acpi_ec	*ec_ecdt;
+static union acpi_ec	*ec_ecdt;
 
 /* External interfaces use first EC only, so remember */
 static struct acpi_device *first_ec;
+static int acpi_ec_polling_mode;
 
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
 
-static inline u32 acpi_ec_read_status(struct acpi_ec *ec)
+static inline u32 acpi_ec_read_status(union acpi_ec *ec)
 {
 	u32	status = 0;
 
-	acpi_hw_low_level_read(8, &status, &ec->status_addr);
+	acpi_hw_low_level_read(8, &status, &ec->common.status_addr);
 	return status;
 }
 
-static int acpi_ec_wait(struct acpi_ec *ec, unsigned int event)
+static int
+acpi_ec_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_wait (ec, event);
+	else
+		return acpi_ec_burst_wait (ec, event);
+}
+
+static int
+acpi_ec_polling_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	u32			acpi_ec_status = 0;
+	u32			i = ACPI_EC_UDELAY_COUNT;
+
+	if (!ec)
+		return -EINVAL;
+
+	/* Poll the EC status register waiting for the event to occur. */
+	switch (event) {
+	case ACPI_EC_EVENT_OBF:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (acpi_ec_status & ACPI_EC_FLAG_OBF)
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	case ACPI_EC_EVENT_IBE:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (!(acpi_ec_status & ACPI_EC_FLAG_IBF))
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return -ETIME;
+}
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
 {
 	int	result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_wait");
 
-	ec->expect_event = event;
+	ec->burst.expect_event = event;
 	smp_mb();
 
-	result = wait_event_interruptible_timeout(ec->wait,
-					!ec->expect_event,
+	result = wait_event_interruptible_timeout(ec->burst.wait,
+					!ec->burst.expect_event,
 					msecs_to_jiffies(ACPI_EC_DELAY));
 	
-	ec->expect_event = 0;
+	ec->burst.expect_event = 0;
 	smp_mb();
 
 	if (result < 0){
@@ -160,7 +269,7 @@
 
 static int
 acpi_ec_enter_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	u32			tmp = 0;
 	int			status = 0;
@@ -170,43 +279,43 @@
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			return_VALUE(-EINVAL);
 		}
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		if(tmp != 0x90 ) {/* Burst ACK byte*/
 			return_VALUE(-EINVAL);
 		}
 	}
 
-	atomic_set(&ec->leaving_burst , 0);
+	atomic_set(&ec->burst.leaving_burst , 0);
 	return_VALUE(0);
 }
 
 static int
 acpi_ec_leave_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	int			status =0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_leave_burst_mode");
 
-	atomic_set(&ec->leaving_burst , 1);
+	atomic_set(&ec->burst.leaving_burst , 1);
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,"------->wait fail\n"));
 			return_VALUE(-EINVAL);
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = acpi_ec_read_status(ec);
 	}
 
@@ -215,7 +324,131 @@
 
 static int
 acpi_ec_read (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_read(ec, address, data);
+	else
+		return acpi_ec_burst_read(ec, address, data);
+}
+static int
+acpi_ec_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_write(ec, address, data);
+	else
+		return acpi_ec_burst_write(ec, address, data);
+}
+static int
+acpi_ec_polling_read (
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	acpi_status		status = AE_OK;
+	int			result = 0;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_read");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
+		*data, address));
+	
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+
+static int
+acpi_ec_polling_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_write");
+
+	if (!ec)
+		return_VALUE(-EINVAL);
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Wrote [%02x] to address [%02x]\n",
+		data, address));
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+static int
+acpi_ec_burst_read (
+	union acpi_ec		*ec,
 	u8			address,
 	u32			*data)
 {
@@ -230,51 +463,51 @@
 retry:
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status) {
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status= acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
 		*data, address));
 	
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -283,8 +516,8 @@
 
 
 static int
-acpi_ec_write (
-	struct acpi_ec		*ec,
+acpi_ec_burst_write (
+	union acpi_ec		*ec,
 	u8			address,
 	u8			data)
 {
@@ -297,14 +530,14 @@
 	if (!ec)
 		return_VALUE(-EINVAL);
 retry:
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
@@ -312,33 +545,33 @@
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status)
 			goto end;
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
 		if(tmp != 0x90 ) /* Burst ACK byte*/
 			goto end;
 	}
 	/*Now we are in burst mode*/
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status){
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, data, &ec->data_addr);
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status)
 		goto end;
 
@@ -347,17 +580,17 @@
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -370,7 +603,7 @@
 int
 ec_read(u8 addr, u8 *val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 	u32 temp_data;
 
@@ -393,7 +626,7 @@
 int
 ec_write(u8 addr, u8 val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 
 	if (!first_ec)
@@ -407,10 +640,66 @@
 }
 EXPORT_SYMBOL(ec_write);
 
-
 static int
 acpi_ec_query (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_query(ec, data);
+	else
+		return acpi_ec_burst_query(ec, data);
+}
+static int
+acpi_ec_polling_query (
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_query");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	/*
+	 * Query the EC to find out which _Qxx method we need to evaluate.
+	 * Note that successful completion of the query causes the ACPI_EC_SCI
+	 * bit to be cleared (and thus clearing the interrupt source).
+	 */
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	if (!*data)
+		result = -ENODATA;
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_query (
+	union acpi_ec		*ec,
 	u32			*data)
 {
 	int			status = 0;
@@ -422,13 +711,13 @@
 		return_VALUE(-EINVAL);
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
-	down(&ec->sem);
+	down(&ec->burst.sem);
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 	/*
@@ -436,28 +725,28 @@
 	 * Note that successful completion of the query causes the ACPI_EC_SCI
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (!*data)
 		status = -ENODATA;
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = -ENODATA;
 	}
 	return_VALUE(status);
@@ -468,7 +757,7 @@
                                 Event Management
    -------------------------------------------------------------------------- */
 
-struct acpi_ec_query_data {
+union acpi_ec_query_data {
 	acpi_handle		handle;
 	u8			data;
 };
@@ -477,7 +766,59 @@
 acpi_ec_gpe_query (
 	void			*ec_cxt)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) ec_cxt;
+	if (acpi_ec_polling_mode) 
+		acpi_ec_gpe_polling_query(ec_cxt);
+	else
+		acpi_ec_gpe_burst_query(ec_cxt);
+}
+
+static void
+acpi_ec_gpe_polling_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
+	u32			value = 0;
+	unsigned long		flags = 0;
+	static char		object_name[5] = {'_','Q','0','0','\0'};
+	const char		hex[] = {'0','1','2','3','4','5','6','7',
+				         '8','9','A','B','C','D','E','F'};
+
+	ACPI_FUNCTION_TRACE("acpi_ec_gpe_query");
+
+	if (!ec_cxt)
+		goto end;
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+	acpi_hw_low_level_read(8, &value, &ec->common.command_addr);
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	/* TBD: Implement asynch events!
+	 * NOTE: All we care about are EC-SCI's.  Other EC events are
+	 * handled via polling (yuck!).  This is because some systems
+	 * treat EC-SCIs as level (versus EDGE!) triggered, preventing
+	 *  a purely interrupt-driven approach (grumble, grumble).
+	 */
+	if (!(value & ACPI_EC_FLAG_SCI))
+		goto end;
+
+	if (acpi_ec_query(ec, &value))
+		goto end;
+
+	object_name[2] = hex[((value >> 4) & 0x0F)];
+	object_name[3] = hex[(value & 0x0F)];
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
+
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
+
+end:	
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
+}
+static void
+acpi_ec_gpe_burst_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
 	u32			value;
 	int			result = -ENODATA;
 	static char		object_name[5] = {'_','Q','0','0','\0'};
@@ -497,9 +838,9 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
 
-	acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
 end:	
-	atomic_dec(&ec->pending_gpe);
+	atomic_dec(&ec->burst.pending_gpe);
 	return;
 }
 
@@ -507,48 +848,77 @@
 acpi_ec_gpe_handler (
 	void			*data)
 {
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_gpe_polling_handler(data);
+	else
+		return acpi_ec_gpe_burst_handler(data);	
+}
+static u32
+acpi_ec_gpe_polling_handler (
+	void			*data)
+{
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = (union acpi_ec *) data;
+
+	if (!ec)
+		return ACPI_INTERRUPT_NOT_HANDLED;
+
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
+
+	status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
+		acpi_ec_gpe_query, ec);
+
+	if (status == AE_OK)
+		return ACPI_INTERRUPT_HANDLED;
+	else
+		return ACPI_INTERRUPT_NOT_HANDLED;
+}
+static u32
+acpi_ec_gpe_burst_handler (
+	void			*data)
+{
 	acpi_status		status = AE_OK;
 	u32			value;
-	struct acpi_ec		*ec = (struct acpi_ec *) data;
+	union acpi_ec		*ec = (union acpi_ec *) data;
 
 	if (!ec)
 		return ACPI_INTERRUPT_NOT_HANDLED;
 
-	acpi_disable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 
 	value = acpi_ec_read_status(ec);
 
 	if((value & ACPI_EC_FLAG_IBF) &&
 		!(value & ACPI_EC_FLAG_BURST) &&
-			(atomic_read(&ec->leaving_burst) == 0)) { 
+			(atomic_read(&ec->burst.leaving_burst) == 0)) { 
 	/*
 	 * the embedded controller disables 
 	 * burst mode for any reason other 
 	 * than the burst disable command
 	 * to process critical event.
 	 */
-		atomic_set(&ec->leaving_burst , 2); /* block current pending transaction
+		atomic_set(&ec->burst.leaving_burst , 2); /* block current pending transaction
 					and retry */
-		wake_up(&ec->wait);
+		wake_up(&ec->burst.wait);
 	}else {
-		if ((ec->expect_event == ACPI_EC_EVENT_OBF &&
+		if ((ec->burst.expect_event == ACPI_EC_EVENT_OBF &&
 				(value & ACPI_EC_FLAG_OBF)) ||
-	    			(ec->expect_event == ACPI_EC_EVENT_IBE &&
+	    			(ec->burst.expect_event == ACPI_EC_EVENT_IBE &&
 				!(value & ACPI_EC_FLAG_IBF))) {
-			ec->expect_event = 0;
-			wake_up(&ec->wait);
+			ec->burst.expect_event = 0;
+			wake_up(&ec->burst.wait);
 			return ACPI_INTERRUPT_HANDLED;
 		}
 	}
 
 	if (value & ACPI_EC_FLAG_SCI){
-		atomic_add(1, &ec->pending_gpe) ;
+		atomic_add(1, &ec->burst.pending_gpe) ;
 		status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
 						acpi_ec_gpe_query, ec);
 		return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 	} 
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 	return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 }
@@ -585,7 +955,7 @@
 	void			*region_context)
 {
 	int			result = 0;
-	struct acpi_ec		*ec = NULL;
+	union acpi_ec		*ec = NULL;
 	u64			temp = *value;
 	acpi_integer		f_v = 0;
 	int 			i = 0;
@@ -600,7 +970,7 @@
 		return_VALUE(AE_BAD_PARAMETER);
 	}
 
-	ec = (struct acpi_ec *) handler_context;
+	ec = (union acpi_ec *) handler_context;
 
 next_byte:
 	switch (function) {
@@ -661,7 +1031,7 @@
 static int
 acpi_ec_read_info (struct seq_file *seq, void *offset)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) seq->private;
+	union acpi_ec		*ec = (union acpi_ec *) seq->private;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_read_info");
 
@@ -669,12 +1039,12 @@
 		goto end;
 
 	seq_printf(seq, "gpe bit:                 0x%02x\n",
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
 	seq_printf(seq, "ports:                   0x%02x, 0x%02x\n",
-		(u32) ec->status_addr.address, (u32) ec->data_addr.address);
+		(u32) ec->common.status_addr.address, (u32) ec->common.data_addr.address);
 	seq_printf(seq, "use global lock:         %s\n",
-		ec->global_lock?"yes":"no");
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		ec->common.global_lock?"yes":"no");
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 end:
 	return_VALUE(0);
@@ -697,7 +1067,7 @@
 acpi_ec_add_fs (
 	struct acpi_device	*device)
 {
-	struct proc_dir_entry	*entry;
+	struct proc_dir_entry	*entry = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add_fs");
 
@@ -744,13 +1114,14 @@
                                Driver Interface
    -------------------------------------------------------------------------- */
 
+
 static int
-acpi_ec_add (
+acpi_ec_polling_add (
 	struct acpi_device	*device)
 {
-	int			result;
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 	unsigned long		uid;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add");
@@ -758,39 +1129,107 @@
 	if (!device)
 		return_VALUE(-EINVAL);
 
-	ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec)
 		return_VALUE(-ENOMEM);
-	memset(ec, 0, sizeof(struct acpi_ec));
+	memset(ec, 0, sizeof(union acpi_ec));
 
-	ec->handle = device->handle;
-	ec->uid = -1;
- 	atomic_set(&ec->pending_gpe, 0);
- 	atomic_set(&ec->leaving_burst , 1);
- 	init_MUTEX(&ec->sem);
- 	init_waitqueue_head(&ec->wait);
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+	spin_lock_init(&ec->polling.lock);
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 	acpi_driver_data(device) = ec;
 
 	/* Use the global lock for all EC transactions? */
-	acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
 
 	/* If our UID matches the UID for the ECDT-enumerated EC,
 	   we now have the *real* EC info, so kill the makeshift one.*/
-	acpi_evaluate_integer(ec->handle, "_UID", NULL, &uid);
-	if (ec_ecdt && ec_ecdt->uid == uid) {
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
 		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
+	
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
+
+		kfree(ec_ecdt);
+	}
+
+	/* Get GPE bit assignment (EC events). */
+	/* TODO: Add support for _GPE returning a package */
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+			"Error obtaining GPE bit assignment\n"));
+		result = -ENODEV;
+		goto end;
+	}
+
+	result = acpi_ec_add_fs(device);
+	if (result)
+		goto end;
+
+	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+		acpi_device_name(device), acpi_device_bid(device),
+		(u32) ec->common.gpe_bit);
+
+	if (!first_ec)
+		first_ec = device;
+
+end:
+	if (result)
+		kfree(ec);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_add (
+	struct acpi_device	*device)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
+	unsigned long		uid;
 
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit, &acpi_ec_gpe_handler);
+	ACPI_FUNCTION_TRACE("acpi_ec_add");
+
+	if (!device)
+		return_VALUE(-EINVAL);
+
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec)
+		return_VALUE(-ENOMEM);
+	memset(ec, 0, sizeof(union acpi_ec));
+
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+ 	atomic_set(&ec->burst.pending_gpe, 0);
+ 	atomic_set(&ec->burst.leaving_burst , 1);
+ 	init_MUTEX(&ec->burst.sem);
+ 	init_waitqueue_head(&ec->burst.wait);
+	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
+	acpi_driver_data(device) = ec;
+
+	/* Use the global lock for all EC transactions? */
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
+
+	/* If our UID matches the UID for the ECDT-enumerated EC,
+	   we now have the *real* EC info, so kill the makeshift one.*/
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
+		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
+			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
+
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
 
 		kfree(ec_ecdt);
 	}
 
 	/* Get GPE bit assignment (EC events). */
 	/* TODO: Add support for _GPE returning a package */
-	status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe_bit);
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 			"Error obtaining GPE bit assignment\n"));
@@ -804,7 +1243,7 @@
 
 	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
 		acpi_device_name(device), acpi_device_bid(device),
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
 
 	if (!first_ec)
 		first_ec = device;
@@ -822,7 +1261,7 @@
 	struct acpi_device	*device,
 	int			type)
 {
-	struct acpi_ec		*ec;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_remove");
 
@@ -844,7 +1283,7 @@
 	struct acpi_resource	*resource,
 	void			*context)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) context;
+	union acpi_ec		*ec = (union acpi_ec *) context;
 	struct acpi_generic_address *addr;
 
 	if (resource->id != ACPI_RSTYPE_IO) {
@@ -856,10 +1295,10 @@
 	 * the second address region returned is the status/command
 	 * port.
 	 */
-	if (ec->data_addr.register_bit_width == 0) {
-		addr = &ec->data_addr;
-	} else if (ec->command_addr.register_bit_width == 0) {
-		addr = &ec->command_addr;
+	if (ec->common.data_addr.register_bit_width == 0) {
+		addr = &ec->common.data_addr;
+	} else if (ec->common.command_addr.register_bit_width == 0) {
+		addr = &ec->common.command_addr;
 	} else {
 		return AE_CTRL_TERMINATE;
 	}
@@ -877,8 +1316,8 @@
 acpi_ec_start (
 	struct acpi_device	*device)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_start");
 
@@ -893,35 +1332,36 @@
 	/*
 	 * Get I/O port addresses. Convert to GAS format.
 	 */
-	status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS,
+	status = acpi_walk_resources(ec->common.handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec);
-	if (ACPI_FAILURE(status) || ec->command_addr.register_bit_width == 0) {
+	if (ACPI_FAILURE(status) || ec->common.command_addr.register_bit_width == 0) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error getting I/O port addresses"));
 		return_VALUE(-ENODEV);
 	}
 
-	ec->status_addr = ec->command_addr;
+	ec->common.status_addr = ec->common.command_addr;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02x, ports=0x%2x,0x%2x\n",
-		(u32) ec->gpe_bit, (u32) ec->command_addr.address,
-		(u32) ec->data_addr.address));
+		(u32) ec->common.gpe_bit, (u32) ec->common.command_addr.address,
+		(u32) ec->common.data_addr.address));
+
 
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status)) {
 		return_VALUE(-ENODEV);
 	}
-	acpi_set_gpe_type (NULL, ec->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
-	status = acpi_install_address_space_handler (ec->handle,
+	status = acpi_install_address_space_handler (ec->common.handle,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+		acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 		return_VALUE(-ENODEV);
 	}
 
@@ -934,8 +1374,8 @@
 	struct acpi_device	*device,
 	int			type)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_stop");
 
@@ -944,12 +1384,12 @@
 
 	ec = acpi_driver_data(device);
 
-	status = acpi_remove_address_space_handler(ec->handle,
+	status = acpi_remove_address_space_handler(ec->common.handle,
 		ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
-	status = acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+	status = acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
@@ -963,26 +1403,76 @@
 	void		*context,
 	void		**retval)
 {
+
+	if (acpi_ec_polling_mode)
+		return acpi_fake_ecdt_polling_callback(handle,
+			Level, context, retval);
+	else
+		return acpi_fake_ecdt_burst_callback(handle,
+			Level, context, retval);
+}
+
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
 	acpi_status	status;
 
 	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec_ecdt);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->status_addr = ec_ecdt->command_addr;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
 
-	ec_ecdt->uid = -1;
-	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
 
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe_bit);
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->handle = handle;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
 
 	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
-		(u32) ec_ecdt->gpe_bit, (u32) ec_ecdt->command_addr.address,
-		(u32) ec_ecdt->data_addr.address);
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
+
+	return AE_CTRL_TERMINATE;
+}
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
+	acpi_status	status;
+
+	init_MUTEX(&ec_ecdt->burst.sem);
+	init_waitqueue_head(&ec_ecdt->burst.wait);
+	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+		acpi_ec_io_ports, ec_ecdt);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
+
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
+
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
+
+	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
 
 	return AE_CTRL_TERMINATE;
 }
@@ -1005,12 +1495,12 @@
 
 	printk(KERN_INFO PREFIX "Try to make an fake ECDT\n");
 
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt) {
 		ret = -ENOMEM;
 		goto error;
 	}
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
 	status = acpi_get_devices (ACPI_EC_HID,
 				acpi_fake_ecdt_callback,
@@ -1031,6 +1521,60 @@
 static int __init
 acpi_ec_get_real_ecdt(void)
 {
+	if (acpi_ec_polling_mode)
+		return acpi_ec_polling_get_real_ecdt();
+	else
+		return acpi_ec_burst_get_real_ecdt();
+}
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void)
+{
+	acpi_status		status;
+	struct acpi_table_ecdt 	*ecdt_ptr;
+
+	status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING, 
+		(struct acpi_table_header **) &ecdt_ptr);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	printk(KERN_INFO PREFIX "Found ECDT\n");
+
+	/*
+	 * Generate a temporary ec context to use until the namespace is scanned
+	 */
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec_ecdt)
+		return -ENOMEM;
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
+
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	/* use the GL just to be safe */
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
+
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
+	if (ACPI_FAILURE(status)) {
+		goto error;
+	}
+
+	return 0;
+error:
+	printk(KERN_ERR PREFIX "Could not use ECDT\n");
+	kfree(ec_ecdt);
+	ec_ecdt = NULL;
+
+	return -ENODEV;
+}
+
+
+static int __init
+acpi_ec_burst_get_real_ecdt(void)
+{
 	acpi_status		status;
 	struct acpi_table_ecdt 	*ecdt_ptr;
 
@@ -1044,22 +1588,22 @@
 	/*
 	 * Generate a temporary ec context to use until the namespace is scanned
 	 */
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt)
 		return -ENOMEM;
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
- 	init_MUTEX(&ec_ecdt->sem);
- 	init_waitqueue_head(&ec_ecdt->wait);
-	ec_ecdt->command_addr = ecdt_ptr->ec_control;
-	ec_ecdt->status_addr = ecdt_ptr->ec_control;
-	ec_ecdt->data_addr = ecdt_ptr->ec_data;
-	ec_ecdt->gpe_bit = ecdt_ptr->gpe_bit;
+ 	init_MUTEX(&ec_ecdt->burst.sem);
+ 	init_waitqueue_head(&ec_ecdt->burst.wait);
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
 	/* use the GL just to be safe */
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->uid = ecdt_ptr->uid;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
 
-	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
@@ -1092,20 +1636,20 @@
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler,
 		ec_ecdt);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
-	acpi_set_gpe_type (NULL, ec_ecdt->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec_ecdt->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec_ecdt->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec_ecdt->common.gpe_bit, ACPI_NOT_ISR);
 
 	status = acpi_install_address_space_handler (ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec_ecdt);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit,
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 			&acpi_ec_gpe_handler);
 		goto error;
 	}
@@ -1123,7 +1667,7 @@
 
 static int __init acpi_ec_init (void)
 {
-	int			result;
+	int			result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_init");
 
@@ -1167,3 +1711,10 @@
 	return 0;
 }
 __setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
+static int __init acpi_ec_set_polling_mode(char *str)
+{
+	acpi_ec_polling_mode = EC_POLLING;
+	acpi_ec_driver.ops.add = acpi_ec_polling_add;
+	return 0;
+}
+__setup("ec_polling", acpi_ec_set_polling_mode);
diff -urN linux-2.6.13-rc4/drivers/acpi/pci_irq.c linux-2.6.13-rc5/drivers/acpi/pci_irq.c
--- linux-2.6.13-rc4/drivers/acpi/pci_irq.c	2005-08-01 22:29:03.388272836 -0700
+++ linux-2.6.13-rc5/drivers/acpi/pci_irq.c	2005-08-01 22:29:10.395580816 -0700
@@ -269,7 +269,51 @@
 /* --------------------------------------------------------------------------
                           PCI Interrupt Routing Support
    -------------------------------------------------------------------------- */
+typedef int (*irq_lookup_func)(struct acpi_prt_entry *, int *, int *, char **);
 
+static int
+acpi_pci_allocate_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_allocate_irq");
+
+	if (entry->link.handle) {
+		irq = acpi_pci_link_allocate_irq(entry->link.handle,
+			entry->link.index, edge_level, active_high_low, link);
+		if (irq < 0) {
+			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
+			return_VALUE(-1);
+		}
+	} else {
+		irq = entry->link.index;
+		*edge_level = ACPI_LEVEL_SENSITIVE;
+		*active_high_low = ACPI_ACTIVE_LOW;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
+	return_VALUE(irq);
+}
+
+static int
+acpi_pci_free_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_free_irq");
+	if (entry->link.handle) {
+		irq = acpi_pci_link_free_irq(entry->link.handle);
+	} else {
+		irq = entry->link.index;
+	}
+	return_VALUE(irq);
+}
 /*
  * acpi_pci_irq_lookup
  * success: return IRQ >= 0
@@ -282,12 +326,13 @@
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct acpi_prt_entry	*entry = NULL;
 	int segment = pci_domain_nr(bus);
 	int bus_nr = bus->number;
-	int irq;
+	int ret;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_lookup");
 
@@ -301,22 +346,8 @@
 		return_VALUE(-1);
 	}
 	
-	if (entry->link.handle) {
-		irq = acpi_pci_link_get_irq(entry->link.handle,
-			entry->link.index, edge_level, active_high_low, link);
-		if (irq < 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
-			return_VALUE(-1);
-		}
-	} else {
-		irq = entry->link.index;
-		*edge_level = ACPI_LEVEL_SENSITIVE;
-		*active_high_low = ACPI_ACTIVE_LOW;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
-
-	return_VALUE(irq);
+	ret = func(entry, edge_level, active_high_low, link);
+	return_VALUE(ret);
 }
 
 /*
@@ -330,7 +361,8 @@
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct pci_dev		*bridge = dev;
 	int			irq = -1;
@@ -363,7 +395,7 @@
 		}
 
 		irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
-			pin, edge_level, active_high_low, link);
+			pin, edge_level, active_high_low, link, func);
 	}
 
 	if (irq < 0) {
@@ -415,7 +447,7 @@
 	 * values override any BIOS-assigned IRQs set during boot.
 	 */
  	irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-		&edge_level, &active_high_low, &link);
+		&edge_level, &active_high_low, &link, acpi_pci_allocate_irq);
 
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
@@ -423,7 +455,7 @@
 	 */
 	if (irq < 0)
  		irq = acpi_pci_irq_derive(dev, pin, &edge_level,
-			&active_high_low, &link);
+			&active_high_low, &link, acpi_pci_allocate_irq);
  
 	/*
 	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
@@ -462,7 +494,9 @@
 EXPORT_SYMBOL(acpi_pci_irq_enable);
 
 
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+/* FIXME: implement x86/x86_64 version */
+void __attribute__((weak)) acpi_unregister_gsi(u32 i) {}
+
 void
 acpi_pci_irq_disable (
 	struct pci_dev		*dev)
@@ -489,14 +523,14 @@
 	 * First we check the PCI IRQ routing table (PRT) for an IRQ.
 	 */
  	gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-				  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
 	 * device's parent bridge.
 	 */
 	if (gsi < 0)
  		gsi = acpi_pci_irq_derive(dev, pin,
-					  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	if (gsi < 0)
 		return_VOID;
 
@@ -512,4 +546,3 @@
 
 	return_VOID;
 }
-#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
diff -urN linux-2.6.13-rc4/drivers/acpi/pci_link.c linux-2.6.13-rc5/drivers/acpi/pci_link.c
--- linux-2.6.13-rc4/drivers/acpi/pci_link.c	2005-08-01 22:29:03.388272836 -0700
+++ linux-2.6.13-rc5/drivers/acpi/pci_link.c	2005-08-01 22:29:10.396580860 -0700
@@ -68,6 +68,10 @@
 			},
 };
 
+/*
+ * If a link is initialized, we never change its active and initialized
+ * later even the link is disable. Instead, we just repick the active irq
+ */
 struct acpi_pci_link_irq {
 	u8			active;			/* Current IRQ */
 	u8			edge_level;		/* All IRQs */
@@ -76,8 +80,7 @@
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
 	u8			initialized:1;
-	u8			suspend_resume:1;
-	u8			reserved:6;
+	u8			reserved:7;
 };
 
 struct acpi_pci_link {
@@ -85,12 +88,14 @@
 	struct acpi_device	*device;
 	acpi_handle		handle;
 	struct acpi_pci_link_irq irq;
+	int			refcnt;
 };
 
 static struct {
 	int			count;
 	struct list_head	entries;
 }				acpi_link;
+DECLARE_MUTEX(acpi_link_lock);
 
 
 /* --------------------------------------------------------------------------
@@ -532,12 +537,12 @@
 
 	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
 
-	if (link->irq.suspend_resume) {
-		acpi_pci_link_set(link, link->irq.active);
-		link->irq.suspend_resume = 0;
-	}
-	if (link->irq.initialized)
+	if (link->irq.initialized) {
+		if (link->refcnt == 0)
+			/* This means the link is disabled but initialized */
+			acpi_pci_link_set(link, link->irq.active);
 		return_VALUE(0);
+	}
 
 	/*
 	 * search for active IRQ in list of possible IRQs.
@@ -596,13 +601,13 @@
 }
 
 /*
- * acpi_pci_link_get_irq
+ * acpi_pci_link_allocate_irq
  * success: return IRQ >= 0
  * failure: return -1
  */
 
 int
-acpi_pci_link_get_irq (
+acpi_pci_link_allocate_irq (
 	acpi_handle		handle,
 	int			index,
 	int			*edge_level,
@@ -613,7 +618,7 @@
 	struct acpi_device	*device = NULL;
 	struct acpi_pci_link	*link = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_pci_link_get_irq");
+	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate_irq");
 
 	result = acpi_bus_get_device(handle, &device);
 	if (result) {
@@ -633,21 +638,70 @@
 		return_VALUE(-1);
 	}
 
-	if (acpi_pci_link_allocate(link))
+	down(&acpi_link_lock);
+	if (acpi_pci_link_allocate(link)) {
+		up(&acpi_link_lock);
 		return_VALUE(-1);
+	}
 	   
 	if (!link->irq.active) {
+		up(&acpi_link_lock);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n"));
 		return_VALUE(-1);
 	}
+	link->refcnt ++;
+	up(&acpi_link_lock);
 
 	if (edge_level) *edge_level = link->irq.edge_level;
 	if (active_high_low) *active_high_low = link->irq.active_high_low;
 	if (name) *name = acpi_device_bid(link->device);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is referenced\n", acpi_device_bid(link->device)));
 	return_VALUE(link->irq.active);
 }
 
+/*
+ * We don't change link's irq information here.  After it is reenabled, we
+ * continue use the info
+ */
+int
+acpi_pci_link_free_irq(acpi_handle handle)
+{
+	struct acpi_device	*device = NULL;
+	struct acpi_pci_link	*link = NULL;
+	acpi_status		result;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_link_free_irq");
+
+	result = acpi_bus_get_device(handle, &device);
+	if (result) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+		return_VALUE(-1);
+	}
+
+	link = (struct acpi_pci_link *) acpi_driver_data(device);
+	if (!link) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+		return_VALUE(-1);
+	}
+
+	down(&acpi_link_lock);
+	if (!link->irq.initialized) {
+		up(&acpi_link_lock);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link isn't initialized\n"));
+		return_VALUE(-1);
+	}
+
+	link->refcnt --;
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is dereferenced\n", acpi_device_bid(link->device)));
 
+	if (link->refcnt == 0) {
+		acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	}
+	up(&acpi_link_lock);
+	return_VALUE(link->irq.active);
+}
 /* --------------------------------------------------------------------------
                                  Driver Interface
    -------------------------------------------------------------------------- */
@@ -677,6 +731,7 @@
 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
 	acpi_driver_data(device) = link;
 
+	down(&acpi_link_lock);
 	result = acpi_pci_link_get_possible(link);
 	if (result)
 		goto end;
@@ -712,6 +767,7 @@
 end:
 	/* disable all links -- to be activated on use */
 	acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	up(&acpi_link_lock);
 
 	if (result)
 		kfree(link);
@@ -720,23 +776,34 @@
 }
 
 static int
-irqrouter_suspend(
-	struct sys_device *dev,
-	u32	state)
+acpi_pci_link_resume(
+	struct acpi_pci_link *link)
+{
+	ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
+
+	if (link->refcnt && link->irq.active && link->irq.initialized)
+		return_VALUE(acpi_pci_link_set(link, link->irq.active));
+	else
+		return_VALUE(0);
+}
+
+static int
+irqrouter_resume(
+	struct sys_device *dev)
 {
 	struct list_head        *node = NULL;
 	struct acpi_pci_link    *link = NULL;
 
-	ACPI_FUNCTION_TRACE("irqrouter_suspend");
+	ACPI_FUNCTION_TRACE("irqrouter_resume");
 
 	list_for_each(node, &acpi_link.entries) {
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Invalid link context\n"));
 			continue;
 		}
-		if (link->irq.active && link->irq.initialized)
-			link->irq.suspend_resume = 1;
+		acpi_pci_link_resume(link);
 	}
 	return_VALUE(0);
 }
@@ -756,8 +823,9 @@
 
 	link = (struct acpi_pci_link *) acpi_driver_data(device);
 
-	/* TBD: Acquire/release lock */
+	down(&acpi_link_lock);
 	list_del(&link->node);
+	up(&acpi_link_lock);
 
 	kfree(link);
 
@@ -849,9 +917,10 @@
 __setup("acpi_irq_balance", acpi_irq_balance_set);
 
 
+/* FIXME: we will remove this interface after all drivers call pci_disable_device */
 static struct sysdev_class irqrouter_sysdev_class = {
         set_kset_name("irqrouter"),
-        .suspend = irqrouter_suspend,
+        .resume = irqrouter_resume,
 };
 
 
diff -urN linux-2.6.13-rc4/drivers/acpi/processor_idle.c linux-2.6.13-rc5/drivers/acpi/processor_idle.c
--- linux-2.6.13-rc4/drivers/acpi/processor_idle.c	2005-08-01 22:29:03.390272923 -0700
+++ linux-2.6.13-rc5/drivers/acpi/processor_idle.c	2005-08-01 22:29:10.398580948 -0700
@@ -81,30 +81,33 @@
  *
  * To skip this limit, boot/load with a large max_cstate limit.
  */
-static int no_c2c3(struct dmi_system_id *id)
+static int set_max_cstate(struct dmi_system_id *id)
 {
 	if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
 		return 0;
 
-	printk(KERN_NOTICE PREFIX "%s detected - C2,C3 disabled."
+	printk(KERN_NOTICE PREFIX "%s detected - %s disabled."
 		" Override with \"processor.max_cstate=%d\"\n", id->ident,
+		((int)id->driver_data == 1)? "C2,C3":"C3",
 	       ACPI_PROCESSOR_MAX_POWER + 1);
 
-	max_cstate = 1;
+	max_cstate = (int)id->driver_data;
 
 	return 0;
 }
 
 
-
-
 static struct dmi_system_id __initdata processor_power_dmi_table[] = {
-	{ no_c2c3, "IBM ThinkPad R40e", {
+	{ set_max_cstate, "IBM ThinkPad R40e", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }},
-	{ no_c2c3, "Medion 41700", {
+	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }, (void*)1},
+	{ set_max_cstate, "Medion 41700", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }, (void*)1},
+	{ set_max_cstate, "Clevo 5600D", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }},
+	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307") },
+	  (void*)2},
 	{},
 };
 
@@ -549,7 +552,8 @@
 	ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
 
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	/* if info is obtained from pblk/fadt, type equals state */
 	pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -580,7 +584,8 @@
 
 	pr->power.count = 0;
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
@@ -763,7 +768,6 @@
 	}
 
 	if (pr->flags.bm_check) {
-		printk("Disabling BM access before entering C3\n");
 		/* bus mastering control is necessary */
 		if (!pr->flags.bm_control) {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -771,7 +775,6 @@
 			return_VOID;
 		}
 	} else {
-		printk("Invalidating cache before entering C3\n");
 		/*
 		 * WBINVD should be set in fadt, for C3 state to be
 		 * supported on when bm_check is not required.
@@ -842,7 +845,7 @@
 	result = acpi_processor_get_power_info_cst(pr);
 	if ((result) || (acpi_processor_power_verify(pr) < 2)) {
 		result = acpi_processor_get_power_info_fadt(pr);
-		if (result)
+		if ((result) || (acpi_processor_power_verify(pr) < 2))
 			result = acpi_processor_get_power_info_default_c1(pr);
 	}
 
diff -urN linux-2.6.13-rc4/drivers/char/agp/agp.h linux-2.6.13-rc5/drivers/char/agp/agp.h
--- linux-2.6.13-rc4/drivers/char/agp/agp.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/char/agp/agp.h	2005-08-01 22:29:10.476584376 -0700
@@ -143,6 +143,7 @@
 	char major_version;
 	char minor_version;
 	struct list_head list;
+	u32 apbase_config;
 };
 
 #define KB(x)	((x) * 1024)
diff -urN linux-2.6.13-rc4/drivers/char/agp/intel-agp.c linux-2.6.13-rc5/drivers/char/agp/intel-agp.c
--- linux-2.6.13-rc4/drivers/char/agp/intel-agp.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/char/agp/intel-agp.c	2005-08-01 22:29:10.477584420 -0700
@@ -1047,9 +1047,15 @@
 	/* aperture size */
 	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);
 
-	/* address to map to */
-	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
-	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+	if (agp_bridge->apbase_config != 0) {
+		pci_write_config_dword(agp_bridge->dev, AGP_APBASE,
+				       agp_bridge->apbase_config);
+	} else {
+		/* address to map to */
+		pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
+		agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+		agp_bridge->apbase_config = temp;
+	}
 
 	/* attbase - aperture base */
 	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);
diff -urN linux-2.6.13-rc4/drivers/char/keyboard.c linux-2.6.13-rc5/drivers/char/keyboard.c
--- linux-2.6.13-rc4/drivers/char/keyboard.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/char/keyboard.c	2005-08-01 22:29:10.531586794 -0700
@@ -198,10 +198,10 @@
 
 	if (scancode >= dev->keycodemax)
 		return -EINVAL;
-	if (keycode > KEY_MAX)
-		return -EINVAL;
 	if (keycode < 0 || keycode > KEY_MAX)
 		return -EINVAL;
+	if (keycode >> (dev->keycodesize * 8))
+		return -EINVAL;
 
 	oldkey = SET_INPUT_KEYCODE(dev, scancode, keycode);
 
diff -urN linux-2.6.13-rc4/drivers/char/sonypi.c linux-2.6.13-rc5/drivers/char/sonypi.c
--- linux-2.6.13-rc4/drivers/char/sonypi.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/char/sonypi.c	2005-08-01 22:29:10.554587804 -0700
@@ -439,6 +439,11 @@
 	{ 0, 0 },
 };
 
+struct sonypi_keypress {
+	struct input_dev *dev;
+	int key;
+};
+
 static struct sonypi_device {
 	struct pci_dev *dev;
 	struct platform_device *pdev;
@@ -710,22 +715,61 @@
 
 static void input_keyrelease(void *data)
 {
-	struct input_dev *input_dev;
-	int key;
-
-	while (1) {
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&input_dev,
-			      sizeof(input_dev)) != sizeof(input_dev))
-			return;
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&key,
-			      sizeof(key)) != sizeof(key))
-			return;
+	struct sonypi_keypress kp;
 
+	while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp,
+			 sizeof(kp)) == sizeof(kp)) {
 		msleep(10);
-		input_report_key(input_dev, key, 0);
-		input_sync(input_dev);
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
+}
+
+static void sonypi_report_input_event(u8 event)
+{
+	struct input_dev *jog_dev = &sonypi_device.input_jog_dev;
+	struct input_dev *key_dev = &sonypi_device.input_key_dev;
+	struct sonypi_keypress kp = { NULL };
+	int i;
+
+	switch (event) {
+	case SONYPI_EVENT_JOGDIAL_UP:
+	case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, 1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_DOWN:
+	case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, -1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_PRESSED:
+		kp.key = BTN_MIDDLE;
+		kp.dev = jog_dev;
+		break;
+
+	case SONYPI_EVENT_FNKEY_RELEASED:
+		/* Nothing, not all VAIOs generate this event */
+		break;
+
+	default:
+		for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
+			if (event == sonypi_inputkeys[i].sonypiev) {
+				kp.dev = key_dev;
+				kp.key = sonypi_inputkeys[i].inputev;
+				break;
+			}
+		break;
+	}
+
+	if (kp.dev) {
+		input_report_key(kp.dev, kp.key, 1);
+		input_sync(kp.dev);
+		kfifo_put(sonypi_device.input_fifo,
+			  (unsigned char *)&kp, sizeof(kp));
+		schedule_work(&sonypi_device.input_work);
 	}
 }
 
@@ -768,51 +812,8 @@
 		printk(KERN_INFO
 		       "sonypi: event port1=0x%02x,port2=0x%02x\n", v1, v2);
 
-	if (useinput) {
-		struct input_dev *input_jog_dev = &sonypi_device.input_jog_dev;
-		struct input_dev *input_key_dev = &sonypi_device.input_key_dev;
-		switch (event) {
-		case SONYPI_EVENT_JOGDIAL_UP:
-		case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, 1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_DOWN:
-		case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, -1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_PRESSED: {
-			int key = BTN_MIDDLE;
-			input_report_key(input_jog_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_jog_dev,
-				  sizeof(input_jog_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-			break;
-		}
-		case SONYPI_EVENT_FNKEY_RELEASED:
-			/* Nothing, not all VAIOs generate this event */
-			break;
-		}
-		input_sync(input_jog_dev);
-
-		for (i = 0; sonypi_inputkeys[i].sonypiev; i++) {
-			int key;
-
-			if (event != sonypi_inputkeys[i].sonypiev)
-				continue;
-
-			key = sonypi_inputkeys[i].inputev;
-			input_report_key(input_key_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_key_dev,
-				  sizeof(input_key_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-		}
-		input_sync(input_key_dev);
-		schedule_work(&sonypi_device.input_work);
-	}
+	if (useinput)
+		sonypi_report_input_event(event);
 
 	kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event));
 	kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN);
@@ -1227,14 +1228,7 @@
 		sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] =
 			BIT(BTN_MIDDLE);
 		sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL);
-		sonypi_device.input_jog_dev.name =
-			kmalloc(sizeof(SONYPI_JOG_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_jog_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput1;
-		}
-		sprintf(sonypi_device.input_jog_dev.name, SONYPI_JOG_INPUTNAME);
+		sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME;
 		sonypi_device.input_jog_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1248,14 +1242,7 @@
 			if (sonypi_inputkeys[i].inputev)
 				set_bit(sonypi_inputkeys[i].inputev,
 					sonypi_device.input_key_dev.keybit);
-		sonypi_device.input_key_dev.name =
-			kmalloc(sizeof(SONYPI_KEY_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_key_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput2;
-		}
-		sprintf(sonypi_device.input_key_dev.name, SONYPI_KEY_INPUTNAME);
+		sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME;
 		sonypi_device.input_key_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1313,11 +1300,7 @@
 	kfifo_free(sonypi_device.input_fifo);
 out_infifo:
 	input_unregister_device(&sonypi_device.input_key_dev);
-	kfree(sonypi_device.input_key_dev.name);
-out_inkmallocinput2:
 	input_unregister_device(&sonypi_device.input_jog_dev);
-	kfree(sonypi_device.input_jog_dev.name);
-out_inkmallocinput1:
 	free_irq(sonypi_device.irq, sonypi_irq);
 out_reqirq:
 	release_region(sonypi_device.ioport1, sonypi_device.region_size);
@@ -1337,13 +1320,14 @@
 {
 	sonypi_disable();
 
+	synchronize_sched();  /* Allow sonypi interrupt to complete. */
+	flush_scheduled_work();
+
 	platform_device_unregister(sonypi_device.pdev);
 
 	if (useinput) {
 		input_unregister_device(&sonypi_device.input_key_dev);
-		kfree(sonypi_device.input_key_dev.name);
 		input_unregister_device(&sonypi_device.input_jog_dev);
-		kfree(sonypi_device.input_jog_dev.name);
 		kfifo_free(sonypi_device.input_fifo);
 	}
 
diff -urN linux-2.6.13-rc4/drivers/cpufreq/cpufreq.c linux-2.6.13-rc5/drivers/cpufreq/cpufreq.c
--- linux-2.6.13-rc4/drivers/cpufreq/cpufreq.c	2005-08-01 22:29:03.563280527 -0700
+++ linux-2.6.13-rc5/drivers/cpufreq/cpufreq.c	2005-08-01 22:29:10.581588991 -0700
@@ -1130,7 +1130,7 @@
 			  unsigned int target_freq,
 			  unsigned int relation)
 {
-	unsigned int ret;
+	int ret;
 
 	policy = cpufreq_cpu_get(policy->cpu);
 	if (!policy)
@@ -1151,7 +1151,7 @@
 
 static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
 {
-	int ret = -EINVAL;
+	int ret;
 
 	if (!try_module_get(policy->governor->owner))
 		return -EINVAL;
diff -urN linux-2.6.13-rc4/drivers/hwmon/adm1026.c linux-2.6.13-rc5/drivers/hwmon/adm1026.c
--- linux-2.6.13-rc4/drivers/hwmon/adm1026.c	2005-08-01 22:29:03.573280967 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/adm1026.c	2005-08-01 22:29:10.591589431 -0700
@@ -393,7 +393,7 @@
 
 	value = data->config3;
 	if (data->config3 & CFG3_GPIO16_ENABLE) {
-		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
 			"pin disabled.\n");
 	} else {
 		dev_dbg(&client->dev, "THERM pin enabled.  "
diff -urN linux-2.6.13-rc4/drivers/hwmon/atxp1.c linux-2.6.13-rc5/drivers/hwmon/atxp1.c
--- linux-2.6.13-rc4/drivers/hwmon/atxp1.c	2005-08-01 22:29:03.578281187 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/atxp1.c	2005-08-01 22:29:10.596589651 -0700
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -80,9 +81,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > HZ) ||
-	    (jiffies < data->last_updated) ||
-	    !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 
 		/* Update local register data */
 		data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID);
diff -urN linux-2.6.13-rc4/drivers/hwmon/fscpos.c linux-2.6.13-rc5/drivers/hwmon/fscpos.c
--- linux-2.6.13-rc4/drivers/hwmon/fscpos.c	2005-08-01 22:29:03.581281319 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/fscpos.c	2005-08-01 22:29:10.599589782 -0700
@@ -32,6 +32,7 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/init.h>
@@ -572,8 +573,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-			(jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 		int i;
 
 		dev_dbg(&client->dev, "Starting fscpos update\n");
diff -urN linux-2.6.13-rc4/drivers/hwmon/gl520sm.c linux-2.6.13-rc5/drivers/hwmon/gl520sm.c
--- linux-2.6.13-rc4/drivers/hwmon/gl520sm.c	2005-08-01 22:29:03.584281450 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/gl520sm.c	2005-08-01 22:29:10.601589870 -0700
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -678,8 +679,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-	    (jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 
 		dev_dbg(&client->dev, "Starting gl520sm update\n");
 
diff -urN linux-2.6.13-rc4/drivers/hwmon/max1619.c linux-2.6.13-rc5/drivers/hwmon/max1619.c
--- linux-2.6.13-rc4/drivers/hwmon/max1619.c	2005-08-01 22:29:03.598282066 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/max1619.c	2005-08-01 22:29:10.615590486 -0700
@@ -363,7 +363,7 @@
 	i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
 	"Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");
diff -urN linux-2.6.13-rc4/drivers/hwmon/pc87360.c linux-2.6.13-rc5/drivers/hwmon/pc87360.c
--- linux-2.6.13-rc4/drivers/hwmon/pc87360.c	2005-08-01 22:29:03.600282154 -0700
+++ linux-2.6.13-rc5/drivers/hwmon/pc87360.c	2005-08-01 22:29:10.617590574 -0700
@@ -1043,7 +1043,7 @@
 	if (init >= 2 && data->innr) {
 		reg = pc87360_read_value(data, LD_IN, NO_BANK,
 					 PC87365_REG_IN_CONVRATE);
-		dev_info(&client->dev, "VLM conversion set to"
+		dev_info(&client->dev, "VLM conversion set to "
 			 "1s period, 160us delay\n");
 		pc87360_write_value(data, LD_IN, NO_BANK,
 				    PC87365_REG_IN_CONVRATE,
diff -urN linux-2.6.13-rc4/drivers/i2c/busses/i2c-i801.c linux-2.6.13-rc5/drivers/i2c/busses/i2c-i801.c
--- linux-2.6.13-rc4/drivers/i2c/busses/i2c-i801.c	2005-08-01 22:29:03.615282813 -0700
+++ linux-2.6.13-rc5/drivers/i2c/busses/i2c-i801.c	2005-08-01 22:29:10.634591321 -0700
@@ -137,7 +137,7 @@
 		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
 		i801_smba &= 0xfff0;
 		if(i801_smba == 0) {
-			dev_err(&dev->dev, "SMB base address uninitialized"
+			dev_err(&dev->dev, "SMB base address uninitialized "
 				"- upgrade BIOS or use force_addr=0xaddr\n");
 			return -ENODEV;
 		}
@@ -186,7 +186,7 @@
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 		inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@
 		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
 	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
 			"(%02x)\n", temp);
 	}
 	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
diff -urN linux-2.6.13-rc4/drivers/i2c/chips/ds1337.c linux-2.6.13-rc5/drivers/i2c/chips/ds1337.c
--- linux-2.6.13-rc4/drivers/i2c/chips/ds1337.c	2005-08-01 22:29:03.641283956 -0700
+++ linux-2.6.13-rc5/drivers/i2c/chips/ds1337.c	2005-08-01 22:29:10.661592507 -0700
@@ -165,7 +165,7 @@
 	buf[0] = 0;		/* reg offset */
 	buf[1] = BIN2BCD(dt->tm_sec);
 	buf[2] = BIN2BCD(dt->tm_min);
-	buf[3] = BIN2BCD(dt->tm_hour) | (1 << 6);
+	buf[3] = BIN2BCD(dt->tm_hour);
 	buf[4] = BIN2BCD(dt->tm_wday) + 1;
 	buf[5] = BIN2BCD(dt->tm_mday);
 	buf[6] = BIN2BCD(dt->tm_mon) + 1;
@@ -344,9 +344,9 @@
 
 	/* Ensure that device is set in 24-hour mode */
 	val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
-	if ((val >= 0) && (val & (1 << 6)) == 0)
+	if ((val >= 0) && (val & (1 << 6)))
 		i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
-					  val | (1 << 6));
+					  val & 0x3f);
 }
 
 static int ds1337_detach_client(struct i2c_client *client)
diff -urN linux-2.6.13-rc4/drivers/i2c/chips/eeprom.c linux-2.6.13-rc5/drivers/i2c/chips/eeprom.c
--- linux-2.6.13-rc4/drivers/i2c/chips/eeprom.c	2005-08-01 22:29:03.643284044 -0700
+++ linux-2.6.13-rc5/drivers/i2c/chips/eeprom.c	2005-08-01 22:29:10.664592639 -0700
@@ -163,6 +163,11 @@
 	struct eeprom_data *data;
 	int err = 0;
 
+	/* prevent 24RF08 corruption */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -187,9 +192,6 @@
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
-	/* prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Fill in the remaining client fields */
 	strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
 	data->valid = 0;
diff -urN linux-2.6.13-rc4/drivers/i2c/chips/max6875.c linux-2.6.13-rc5/drivers/i2c/chips/max6875.c
--- linux-2.6.13-rc4/drivers/i2c/chips/max6875.c	2005-08-01 22:29:03.687285978 -0700
+++ linux-2.6.13-rc5/drivers/i2c/chips/max6875.c	2005-08-01 22:29:10.708594573 -0700
@@ -343,6 +343,11 @@
 	struct max6875_data *data;
 	int err = 0;
 
+	/* Prevent 24RF08 corruption (in case of user error) */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -370,9 +375,6 @@
 	new_client->driver = &max6875_driver;
 	new_client->flags = 0;
 
-	/* Prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Setup the user section */
 	data->blocks[max6875_eeprom_user].type    = max6875_eeprom_user;
 	data->blocks[max6875_eeprom_user].slices  = USER_EEPROM_SLICES;
diff -urN linux-2.6.13-rc4/drivers/i2c/i2c-core.c linux-2.6.13-rc5/drivers/i2c/i2c-core.c
--- linux-2.6.13-rc4/drivers/i2c/i2c-core.c	2005-08-01 22:29:03.715287208 -0700
+++ linux-2.6.13-rc5/drivers/i2c/i2c-core.c	2005-08-01 22:29:10.736595804 -0700
@@ -231,8 +231,8 @@
 		if (driver->detach_adapter)
 			if ((res = driver->detach_adapter(adap))) {
 				dev_warn(&adap->dev, "can't detach adapter "
-					 "while detaching driver %s: driver not "
-					 "detached!", driver->name);
+					 "while detaching driver %s: driver "
+					 "not detached!\n", driver->name);
 				goto out_unlock;
 			}
 	}
@@ -456,8 +456,8 @@
 		res = adapter->client_unregister(client);
 		if (res) {
 			dev_err(&client->dev,
-			       "client_unregister [%s] failed, "
-			       "client not detached", client->name);
+				"client_unregister [%s] failed, "
+				"client not detached\n", client->name);
 			goto out;
 		}
 	}
diff -urN linux-2.6.13-rc4/drivers/ide/legacy/ide-cs.c linux-2.6.13-rc5/drivers/ide/legacy/ide-cs.c
--- linux-2.6.13-rc4/drivers/ide/legacy/ide-cs.c	2005-08-01 22:29:03.728287780 -0700
+++ linux-2.6.13-rc5/drivers/ide/legacy/ide-cs.c	2005-08-01 22:29:10.750596419 -0700
@@ -508,5 +508,5 @@
 	BUG_ON(dev_list != NULL);
 }
 
-module_init(init_ide_cs);
+late_initcall(init_ide_cs);
 module_exit(exit_ide_cs);
diff -urN linux-2.6.13-rc4/drivers/input/evdev.c linux-2.6.13-rc5/drivers/input/evdev.c
--- linux-2.6.13-rc4/drivers/input/evdev.c	2005-08-01 22:29:03.800290944 -0700
+++ linux-2.6.13-rc5/drivers/input/evdev.c	2005-08-01 22:29:10.825599716 -0700
@@ -320,6 +320,7 @@
 			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize) return -EINVAL;
 			if (get_user(v, ip + 1)) return -EFAULT;
 			if (v < 0 || v > KEY_MAX) return -EINVAL;
+			if (v >> (dev->keycodesize * 8)) return -EINVAL;
 			u = SET_INPUT_KEYCODE(dev, t, v);
 			clear_bit(u, dev->keybit);
 			set_bit(v, dev->keybit);
diff -urN linux-2.6.13-rc4/drivers/input/input.c linux-2.6.13-rc5/drivers/input/input.c
--- linux-2.6.13-rc4/drivers/input/input.c	2005-08-01 22:29:03.805291164 -0700
+++ linux-2.6.13-rc5/drivers/input/input.c	2005-08-01 22:29:10.832600023 -0700
@@ -48,12 +48,6 @@
 
 static struct input_handler *input_table[8];
 
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *proc_bus_input_dir;
-static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
-static int input_devices_state;
-#endif
-
 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct input_handle *handle;
@@ -312,6 +306,7 @@
 	return NULL;
 }
 
+
 /*
  * Input hotplugging interface - loading event handlers based on
  * device bitfields.
@@ -428,6 +423,177 @@
 
 #endif
 
+#ifdef CONFIG_PROC_FS
+
+static struct proc_dir_entry *proc_bus_input_dir;
+static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
+static int input_devices_state;
+
+static inline void input_wakeup_procfs_readers(void)
+{
+	input_devices_state++;
+	wake_up(&input_devices_poll_wait);
+}
+
+static unsigned int input_devices_poll(struct file *file, poll_table *wait)
+{
+	int state = input_devices_state;
+	poll_wait(file, &input_devices_poll_wait, wait);
+	if (state != input_devices_state)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+#define SPRINTF_BIT_B(bit, name, max) \
+	do { \
+		len += sprintf(buf + len, "B: %s", name); \
+		for (i = NBITS(max) - 1; i >= 0; i--) \
+			if (dev->bit[i]) break; \
+		for (; i >= 0; i--) \
+			len += sprintf(buf + len, "%lx ", dev->bit[i]); \
+		len += sprintf(buf + len, "\n"); \
+	} while (0)
+
+#define SPRINTF_BIT_B2(bit, name, max, ev) \
+	do { \
+		if (test_bit(ev, dev->evbit)) \
+			SPRINTF_BIT_B(bit, name, max); \
+	} while (0)
+
+static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+{
+	struct input_dev *dev;
+	struct input_handle *handle;
+
+	off_t at = 0;
+	int i, len, cnt = 0;
+
+	list_for_each_entry(dev, &input_dev_list, node) {
+
+		len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
+			dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
+
+		len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
+		len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
+		len += sprintf(buf + len, "H: Handlers=");
+
+		list_for_each_entry(handle, &dev->h_list, d_node)
+			len += sprintf(buf + len, "%s ", handle->name);
+
+		len += sprintf(buf + len, "\n");
+
+		SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
+		SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
+		SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
+		SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
+		SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
+		SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
+		SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
+		SPRINTF_BIT_B2(ffbit,  "FF=",  FF_MAX, EV_FF);
+
+		len += sprintf(buf + len, "\n");
+
+		at += len;
+
+		if (at >= pos) {
+			if (!*start) {
+				*start = buf + (pos - (at - len));
+				cnt = at - pos;
+			} else  cnt += len;
+			buf += len;
+			if (cnt >= count)
+				break;
+		}
+	}
+
+	if (&dev->node == &input_dev_list)
+		*eof = 1;
+
+	return (count > cnt) ? cnt : count;
+}
+
+static int input_handlers_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+{
+	struct input_handler *handler;
+
+	off_t at = 0;
+	int len = 0, cnt = 0;
+	int i = 0;
+
+	list_for_each_entry(handler, &input_handler_list, node) {
+
+		if (handler->fops)
+			len = sprintf(buf, "N: Number=%d Name=%s Minor=%d\n",
+				i++, handler->name, handler->minor);
+		else
+			len = sprintf(buf, "N: Number=%d Name=%s\n",
+				i++, handler->name);
+
+		at += len;
+
+		if (at >= pos) {
+			if (!*start) {
+				*start = buf + (pos - (at - len));
+				cnt = at - pos;
+			} else  cnt += len;
+			buf += len;
+			if (cnt >= count)
+				break;
+		}
+	}
+	if (&handler->node == &input_handler_list)
+		*eof = 1;
+
+	return (count > cnt) ? cnt : count;
+}
+
+static struct file_operations input_fileops;
+
+static int __init input_proc_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	proc_bus_input_dir = proc_mkdir("input", proc_bus);
+	if (!proc_bus_input_dir)
+		return -ENOMEM;
+
+	proc_bus_input_dir->owner = THIS_MODULE;
+
+	entry = create_proc_read_entry("devices", 0, proc_bus_input_dir, input_devices_read, NULL);
+	if (!entry)
+		goto fail1;
+
+	entry->owner = THIS_MODULE;
+	input_fileops = *entry->proc_fops;
+	entry->proc_fops = &input_fileops;
+	entry->proc_fops->poll = input_devices_poll;
+
+	entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
+	if (!entry)
+		goto fail2;
+
+	entry->owner = THIS_MODULE;
+
+	return 0;
+
+ fail2:	remove_proc_entry("devices", proc_bus_input_dir);
+ fail1: remove_proc_entry("input", proc_bus);
+	return -ENOMEM;
+}
+
+static void input_proc_exit(void)
+{
+	remove_proc_entry("devices", proc_bus_input_dir);
+	remove_proc_entry("handlers", proc_bus_input_dir);
+	remove_proc_entry("input", proc_bus);
+}
+
+#else /* !CONFIG_PROC_FS */
+static inline void input_wakeup_procfs_readers(void) { }
+static inline int input_proc_init(void) { return 0; }
+static inline void input_proc_exit(void) { }
+#endif
+
 void input_register_device(struct input_dev *dev)
 {
 	struct input_handle *handle;
@@ -464,10 +630,7 @@
 	input_call_hotplug("add", dev);
 #endif
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_unregister_device(struct input_dev *dev)
@@ -491,10 +654,7 @@
 
 	list_del_init(&dev->node);
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_register_handler(struct input_handler *handler)
@@ -518,10 +678,7 @@
 				if ((handle = handler->connect(handler, dev, id)))
 					input_link_handle(handle);
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_unregister_handler(struct input_handler *handler)
@@ -540,10 +697,7 @@
 	if (handler->fops != NULL)
 		input_table[handler->minor >> 5] = NULL;
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 static int input_open_file(struct inode *inode, struct file *file)
@@ -582,190 +736,43 @@
 	.open = input_open_file,
 };
 
-#ifdef CONFIG_PROC_FS
-
-#define SPRINTF_BIT_B(bit, name, max) \
-	do { \
-		len += sprintf(buf + len, "B: %s", name); \
-		for (i = NBITS(max) - 1; i >= 0; i--) \
-			if (dev->bit[i]) break; \
-		for (; i >= 0; i--) \
-			len += sprintf(buf + len, "%lx ", dev->bit[i]); \
-		len += sprintf(buf + len, "\n"); \
-	} while (0)
-
-#define SPRINTF_BIT_B2(bit, name, max, ev) \
-	do { \
-		if (test_bit(ev, dev->evbit)) \
-			SPRINTF_BIT_B(bit, name, max); \
-	} while (0)
-
-
-static unsigned int input_devices_poll(struct file *file, poll_table *wait)
-{
-	int state = input_devices_state;
-	poll_wait(file, &input_devices_poll_wait, wait);
-	if (state != input_devices_state)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
+struct class *input_class;
 
-static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+static int __init input_init(void)
 {
-	struct input_dev *dev;
-	struct input_handle *handle;
-
-	off_t at = 0;
-	int i, len, cnt = 0;
-
-	list_for_each_entry(dev, &input_dev_list, node) {
-
-		len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
-			dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
-
-		len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
-		len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
-		len += sprintf(buf + len, "H: Handlers=");
-
-		list_for_each_entry(handle, &dev->h_list, d_node)
-			len += sprintf(buf + len, "%s ", handle->name);
-
-		len += sprintf(buf + len, "\n");
-
-		SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
-		SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
-		SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
-		SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
-		SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
-		SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
-		SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
-		SPRINTF_BIT_B2(ffbit,  "FF=",  FF_MAX, EV_FF);
-
-		len += sprintf(buf + len, "\n");
-
-		at += len;
+	int err;
 
-		if (at >= pos) {
-			if (!*start) {
-				*start = buf + (pos - (at - len));
-				cnt = at - pos;
-			} else  cnt += len;
-			buf += len;
-			if (cnt >= count)
-				break;
-		}
+	input_class = class_create(THIS_MODULE, "input");
+	if (IS_ERR(input_class)) {
+		printk(KERN_ERR "input: unable to register input class\n");
+		return PTR_ERR(input_class);
 	}
 
-	if (&dev->node == &input_dev_list)
-		*eof = 1;
-
-	return (count > cnt) ? cnt : count;
-}
-
-static int input_handlers_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
-{
-	struct input_handler *handler;
-
-	off_t at = 0;
-	int len = 0, cnt = 0;
-	int i = 0;
-
-	list_for_each_entry(handler, &input_handler_list, node) {
-
-		if (handler->fops)
-			len = sprintf(buf, "N: Number=%d Name=%s Minor=%d\n",
-				i++, handler->name, handler->minor);
-		else
-			len = sprintf(buf, "N: Number=%d Name=%s\n",
-				i++, handler->name);
-
-		at += len;
+	err = input_proc_init();
+	if (err)
+		goto fail1;
 
-		if (at >= pos) {
-			if (!*start) {
-				*start = buf + (pos - (at - len));
-				cnt = at - pos;
-			} else  cnt += len;
-			buf += len;
-			if (cnt >= count)
-				break;
-		}
+	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
+	if (err) {
+		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		goto fail2;
 	}
-	if (&handler->node == &input_handler_list)
-		*eof = 1;
 
-	return (count > cnt) ? cnt : count;
-}
-
-static struct file_operations input_fileops;
-
-static int __init input_proc_init(void)
-{
-	struct proc_dir_entry *entry;
+	err = devfs_mk_dir("input");
+	if (err)
+		goto fail3;
 
-	proc_bus_input_dir = proc_mkdir("input", proc_bus);
-	if (proc_bus_input_dir == NULL)
-		return -ENOMEM;
-	proc_bus_input_dir->owner = THIS_MODULE;
-	entry = create_proc_read_entry("devices", 0, proc_bus_input_dir, input_devices_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
-	entry->owner = THIS_MODULE;
-	input_fileops = *entry->proc_fops;
-	entry->proc_fops = &input_fileops;
-	entry->proc_fops->poll = input_devices_poll;
-	entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
-	entry->owner = THIS_MODULE;
 	return 0;
-}
-#else /* !CONFIG_PROC_FS */
-static inline int input_proc_init(void) { return 0; }
-#endif
-
-struct class *input_class;
-
-static int __init input_init(void)
-{
-	int retval = -ENOMEM;
 
-	input_class = class_create(THIS_MODULE, "input");
-	if (IS_ERR(input_class))
-		return PTR_ERR(input_class);
-	input_proc_init();
-	retval = register_chrdev(INPUT_MAJOR, "input", &input_fops);
-	if (retval) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		class_destroy(input_class);
-		return retval;
-	}
-
-	retval = devfs_mk_dir("input");
-	if (retval) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		unregister_chrdev(INPUT_MAJOR, "input");
-		class_destroy(input_class);
-	}
-	return retval;
+ fail3:	unregister_chrdev(INPUT_MAJOR, "input");
+ fail2:	input_proc_exit();
+ fail1:	class_destroy(input_class);
+	return err;
 }
 
 static void __exit input_exit(void)
 {
-	remove_proc_entry("devices", proc_bus_input_dir);
-	remove_proc_entry("handlers", proc_bus_input_dir);
-	remove_proc_entry("input", proc_bus);
-
+	input_proc_exit();
 	devfs_remove("input");
 	unregister_chrdev(INPUT_MAJOR, "input");
 	class_destroy(input_class);
diff -urN linux-2.6.13-rc4/drivers/input/joydev.c linux-2.6.13-rc5/drivers/input/joydev.c
--- linux-2.6.13-rc4/drivers/input/joydev.c	2005-08-01 22:29:03.806291208 -0700
+++ linux-2.6.13-rc5/drivers/input/joydev.c	2005-08-01 22:29:10.833600067 -0700
@@ -37,8 +37,6 @@
 #define JOYDEV_MINORS		16
 #define JOYDEV_BUFFER_SIZE	64
 
-#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-
 struct joydev {
 	int exist;
 	int open;
@@ -117,7 +115,7 @@
 			return;
 	}
 
-	event.time = MSECS(jiffies);
+	event.time = jiffies_to_msecs(jiffies);
 
 	list_for_each_entry(list, &joydev->list, node) {
 
@@ -245,7 +243,7 @@
 
 		struct js_event event;
 
-		event.time = MSECS(jiffies);
+		event.time = jiffies_to_msecs(jiffies);
 
 		if (list->startup < joydev->nkey) {
 			event.type = JS_EVENT_BUTTON | JS_EVENT_INIT;
diff -urN linux-2.6.13-rc4/drivers/input/misc/uinput.c linux-2.6.13-rc5/drivers/input/misc/uinput.c
--- linux-2.6.13-rc4/drivers/input/misc/uinput.c	2005-08-01 22:29:03.813291516 -0700
+++ linux-2.6.13-rc5/drivers/input/misc/uinput.c	2005-08-01 22:29:10.842600463 -0700
@@ -36,16 +36,6 @@
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
 
-static int uinput_dev_open(struct input_dev *dev)
-{
-	return 0;
-}
-
-static void uinput_dev_close(struct input_dev *dev)
-{
-
-}
-
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct uinput_device	*udev;
@@ -63,22 +53,24 @@
 	return 0;
 }
 
-static int uinput_request_alloc_id(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_alloc_id(struct uinput_device *udev, struct uinput_request *request)
 {
 	/* Atomically allocate an ID for the given request. Returns 0 on success. */
-	struct uinput_device *udev = dev->private;
 	int id;
+	int err = -1;
+
+	spin_lock(&udev->requests_lock);
 
-	down(&udev->requests_sem);
-	for (id=0; id<UINPUT_NUM_REQUESTS; id++)
+	for (id = 0; id < UINPUT_NUM_REQUESTS; id++)
 		if (!udev->requests[id]) {
-			udev->requests[id] = request;
 			request->id = id;
-			up(&udev->requests_sem);
-			return 0;
+			udev->requests[id] = request;
+			err = 0;
+			break;
 		}
-	up(&udev->requests_sem);
-	return -1;
+
+	spin_unlock(&udev->requests_lock);
+	return err;
 }
 
 static struct uinput_request* uinput_request_find(struct uinput_device *udev, int id)
@@ -86,70 +78,78 @@
 	/* Find an input request, by ID. Returns NULL if the ID isn't valid. */
 	if (id >= UINPUT_NUM_REQUESTS || id < 0)
 		return NULL;
-	if (udev->requests[id]->completed)
-		return NULL;
 	return udev->requests[id];
 }
 
-static void uinput_request_init(struct input_dev *dev, struct uinput_request *request, int code)
+static inline int uinput_request_reserve_slot(struct uinput_device *udev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
+	/* Allocate slot. If none are available right away, wait. */
+	return wait_event_interruptible(udev->requests_waitq,
+					!uinput_request_alloc_id(udev, request));
+}
 
-	memset(request, 0, sizeof(struct uinput_request));
-	request->code = code;
-	init_waitqueue_head(&request->waitq);
+static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request)
+{
+	complete(&request->done);
 
-	/* Allocate an ID. If none are available right away, wait. */
-	request->retval = wait_event_interruptible(udev->requests_waitq,
-				       !uinput_request_alloc_id(dev, request));
+	/* Mark slot as available */
+	udev->requests[request->id] = NULL;
+	wake_up_interruptible(&udev->requests_waitq);
 }
 
-static void uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
 	int retval;
 
 	/* Tell our userspace app about this new request by queueing an input event */
 	uinput_dev_event(dev, EV_UINPUT, request->code, request->id);
 
 	/* Wait for the request to complete */
-	retval = wait_event_interruptible(request->waitq, request->completed);
-	if (retval)
-		request->retval = retval;
+	retval = wait_for_completion_interruptible(&request->done);
+	if (!retval)
+		retval = request->retval;
 
-	/* Release this request's ID, let others know it's available */
-	udev->requests[request->id] = NULL;
-	wake_up_interruptible(&udev->requests_waitq);
+	return retval;
 }
 
 static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *effect)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_UPLOAD);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_UPLOAD;
 	request.u.effect = effect;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_ERASE);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_ERASE;
 	request.u.effect_id = effect_id;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_create_device(struct uinput_device *udev)
@@ -159,32 +159,30 @@
 		return -EINVAL;
 	}
 
-	udev->dev->open = uinput_dev_open;
-	udev->dev->close = uinput_dev_close;
 	udev->dev->event = uinput_dev_event;
 	udev->dev->upload_effect = uinput_dev_upload_effect;
 	udev->dev->erase_effect = uinput_dev_erase_effect;
 	udev->dev->private = udev;
 
-	init_waitqueue_head(&(udev->waitq));
+	init_waitqueue_head(&udev->waitq);
 
 	input_register_device(udev->dev);
 
-	set_bit(UIST_CREATED, &(udev->state));
+	set_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
 
 static int uinput_destroy_device(struct uinput_device *udev)
 {
-	if (!test_bit(UIST_CREATED, &(udev->state))) {
+	if (!test_bit(UIST_CREATED, &udev->state)) {
 		printk(KERN_WARNING "%s: create the device first\n", UINPUT_NAME);
 		return -EINVAL;
 	}
 
 	input_unregister_device(udev->dev);
 
-	clear_bit(UIST_CREATED, &(udev->state));
+	clear_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
@@ -198,7 +196,7 @@
 	if (!newdev)
 		goto error;
 	memset(newdev, 0, sizeof(struct uinput_device));
-	init_MUTEX(&newdev->requests_sem);
+	spin_lock_init(&newdev->requests_lock);
 	init_waitqueue_head(&newdev->requests_waitq);
 
 	newinput = kmalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -253,15 +251,16 @@
 	struct uinput_user_dev	*user_dev;
 	struct input_dev	*dev;
 	struct uinput_device	*udev;
-	int			size,
-				retval;
+	char			*name;
+	int			size;
+	int			retval;
 
 	retval = count;
 
 	udev = file->private_data;
 	dev = udev->dev;
 
-	user_dev = kmalloc(sizeof(*user_dev), GFP_KERNEL);
+	user_dev = kmalloc(sizeof(struct uinput_user_dev), GFP_KERNEL);
 	if (!user_dev) {
 		retval = -ENOMEM;
 		goto exit;
@@ -272,17 +271,17 @@
 		goto exit;
 	}
 
-	if (NULL != dev->name)
+	if (dev->name)
 		kfree(dev->name);
 
 	size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
-	dev->name = kmalloc(size, GFP_KERNEL);
-	if (!dev->name) {
+	dev->name = name = kmalloc(size, GFP_KERNEL);
+	if (!name) {
 		retval = -ENOMEM;
 		goto exit;
 	}
+	strlcpy(name, user_dev->name, size);
 
-	strlcpy(dev->name, user_dev->name, size);
 	dev->id.bustype	= user_dev->id.bustype;
 	dev->id.vendor	= user_dev->id.vendor;
 	dev->id.product	= user_dev->id.product;
@@ -314,14 +313,13 @@
 {
 	struct uinput_device *udev = file->private_data;
 
-	if (test_bit(UIST_CREATED, &(udev->state))) {
+	if (test_bit(UIST_CREATED, &udev->state)) {
 		struct input_event	ev;
 
 		if (copy_from_user(&ev, buffer, sizeof(struct input_event)))
 			return -EFAULT;
 		input_event(udev->dev, ev.type, ev.code, ev.value);
-	}
-	else
+	} else
 		count = uinput_alloc_device(file, buffer, count);
 
 	return count;
@@ -332,26 +330,24 @@
 	struct uinput_device *udev = file->private_data;
 	int retval = 0;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
-	if ((udev->head == udev->tail) && (file->f_flags & O_NONBLOCK))
+	if (udev->head == udev->tail && (file->f_flags & O_NONBLOCK))
 		return -EAGAIN;
 
 	retval = wait_event_interruptible(udev->waitq,
-			(udev->head != udev->tail) ||
-			!test_bit(UIST_CREATED, &(udev->state)));
-
+			udev->head != udev->tail || !test_bit(UIST_CREATED, &udev->state));
 	if (retval)
 		return retval;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
 	while ((udev->head != udev->tail) &&
 	    (retval + sizeof(struct input_event) <= count)) {
-		if (copy_to_user(buffer + retval, &(udev->buff[udev->tail]),
-		    sizeof(struct input_event))) return -EFAULT;
+		if (copy_to_user(buffer + retval, &udev->buff[udev->tail], sizeof(struct input_event)))
+			return -EFAULT;
 		udev->tail = (udev->tail + 1) % UINPUT_BUFFER_SIZE;
 		retval += sizeof(struct input_event);
 	}
@@ -373,12 +369,12 @@
 
 static int uinput_burn_device(struct uinput_device *udev)
 {
-	if (test_bit(UIST_CREATED, &(udev->state)))
+	if (test_bit(UIST_CREATED, &udev->state))
 		uinput_destroy_device(udev);
 
-	if (NULL != udev->dev->name)
+	if (udev->dev->name)
 		kfree(udev->dev->name);
-	if (NULL != udev->dev->phys)
+	if (udev->dev->phys)
 		kfree(udev->dev->phys);
 
 	kfree(udev->dev);
@@ -389,7 +385,8 @@
 
 static int uinput_close(struct inode *inode, struct file *file)
 {
-	return uinput_burn_device(file->private_data);
+	uinput_burn_device(file->private_data);
+	return 0;
 }
 
 static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
@@ -401,6 +398,7 @@
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
 	int                     length;
+	char			*phys;
 
 	udev = file->private_data;
 
@@ -415,7 +413,7 @@
 		case UI_SET_SNDBIT:
 		case UI_SET_FFBIT:
 		case UI_SET_PHYS:
-			if (test_bit(UIST_CREATED, &(udev->state)))
+			if (test_bit(UIST_CREATED, &udev->state))
 				return -EINVAL;
 	}
 
@@ -498,20 +496,19 @@
 				retval = -EFAULT;
 				break;
 			}
-			if (NULL != udev->dev->phys)
-				kfree(udev->dev->phys);
-			udev->dev->phys = kmalloc(length, GFP_KERNEL);
-			if (!udev->dev->phys) {
+			kfree(udev->dev->phys);
+			udev->dev->phys = phys = kmalloc(length, GFP_KERNEL);
+			if (!phys) {
 				retval = -ENOMEM;
 				break;
 			}
-			if (copy_from_user(udev->dev->phys, p, length)) {
-				retval = -EFAULT;
-				kfree(udev->dev->phys);
+			if (copy_from_user(phys, p, length)) {
 				udev->dev->phys = NULL;
+				kfree(phys);
+				retval = -EFAULT;
 				break;
 			}
-			udev->dev->phys[length-1] = '\0';
+			phys[length - 1] = '\0';
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
@@ -520,7 +517,7 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -538,7 +535,7 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -556,14 +553,13 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_up.retval;
 			memcpy(req->u.effect, &ff_up.effect, sizeof(struct ff_effect));
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		case UI_END_FF_ERASE:
@@ -572,13 +568,12 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_erase.retval;
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		default:
diff -urN linux-2.6.13-rc4/drivers/input/mouse/alps.c linux-2.6.13-rc5/drivers/input/mouse/alps.c
--- linux-2.6.13-rc4/drivers/input/mouse/alps.c	2005-08-01 22:29:03.814291560 -0700
+++ linux-2.6.13-rc5/drivers/input/mouse/alps.c	2005-08-01 22:29:10.843600507 -0700
@@ -2,7 +2,7 @@
  * ALPS touchpad PS/2 mouse driver
  *
  * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
- * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
  * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
  * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
  *
@@ -350,7 +350,6 @@
 static int alps_reconnect(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
-	unsigned char param[4];
 	int version;
 
 	psmouse_reset(psmouse);
@@ -358,21 +357,20 @@
 	if (!(priv->i = alps_get_model(psmouse, &version)))
 		return -1;
 
-	if (priv->i->flags & ALPS_PASS && alps_passthrough_mode(psmouse, 1))
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		return -1;
 
-	if (alps_get_status(psmouse, param))
+	if (alps_tap_mode(psmouse, 1)) {
+		printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
 		return -1;
-
-	if (!(param[0] & 0x04))
-		alps_tap_mode(psmouse, 1);
+	}
 
 	if (alps_absolute_mode(psmouse)) {
-		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
+		printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
 		return -1;
 	}
 
-	if (priv->i->flags == ALPS_PASS && alps_passthrough_mode(psmouse, 0))
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
 		return -1;
 
 	return 0;
@@ -389,7 +387,6 @@
 int alps_init(struct psmouse *psmouse)
 {
 	struct alps_data *priv;
-	unsigned char param[4];
 	int version;
 
 	psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL);
@@ -403,16 +400,8 @@
 	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		goto init_fail;
 
-	if (alps_get_status(psmouse, param)) {
-		printk(KERN_ERR "alps.c: touchpad status report request failed\n");
-		goto init_fail;
-	}
-
-	if (param[0] & 0x04) {
-		printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
-		if (alps_tap_mode(psmouse, 1))
-			printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-	}
+	if (alps_tap_mode(psmouse, 1))
+		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
 
 	if (alps_absolute_mode(psmouse)) {
 		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
diff -urN linux-2.6.13-rc4/drivers/input/mouse/logips2pp.c linux-2.6.13-rc5/drivers/input/mouse/logips2pp.c
--- linux-2.6.13-rc4/drivers/input/mouse/logips2pp.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/mouse/logips2pp.c	2005-08-01 22:29:10.845600595 -0700
@@ -385,8 +385,6 @@
 
 		if (buttons < 3)
 			clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
-		if (buttons < 2)
-			clear_bit(BTN_RIGHT, psmouse->dev.keybit);
 
 		if (model_info)
 			ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff -urN linux-2.6.13-rc4/drivers/input/mouse/psmouse-base.c linux-2.6.13-rc5/drivers/input/mouse/psmouse-base.c
--- linux-2.6.13-rc4/drivers/input/mouse/psmouse-base.c	2005-08-01 22:29:03.818291735 -0700
+++ linux-2.6.13-rc5/drivers/input/mouse/psmouse-base.c	2005-08-01 22:29:10.847600683 -0700
@@ -344,6 +344,7 @@
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 
 		if (!psmouse->vendor) psmouse->vendor = "Generic";
@@ -376,6 +377,7 @@
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 		set_bit(BTN_SIDE, psmouse->dev.keybit);
 		set_bit(BTN_EXTRA, psmouse->dev.keybit);
diff -urN linux-2.6.13-rc4/drivers/input/mouse/synaptics.c linux-2.6.13-rc5/drivers/input/mouse/synaptics.c
--- linux-2.6.13-rc4/drivers/input/mouse/synaptics.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/mouse/synaptics.c	2005-08-01 22:29:10.848600727 -0700
@@ -219,7 +219,7 @@
 		serio_interrupt(ptport, packet[1], 0, NULL);
 		serio_interrupt(ptport, packet[4], 0, NULL);
 		serio_interrupt(ptport, packet[5], 0, NULL);
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			serio_interrupt(ptport, packet[2], 0, NULL);
 	} else
 		serio_interrupt(ptport, packet[1], 0, NULL);
@@ -233,7 +233,7 @@
 
 	/* adjust the touchpad to child's choice of protocol */
 	if (child) {
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			priv->mode |= SYN_BIT_FOUR_BYTE_CLIENT;
 		else
 			priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
@@ -608,6 +608,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME , "Satellite"),
 		},
 	},
+	{
+		.ident = "Toshiba Dynabook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME , "dynabook"),
+		},
+	},
 	{ }
 };
 #endif
@@ -656,7 +663,8 @@
 	 * thye same as rate of standard PS/2 mouse.
 	 */
 	if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) {
-		printk(KERN_INFO "synaptics: Toshiba Satellite detected, limiting rate to 40pps.\n");
+		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
+			dmi_get_system_info(DMI_PRODUCT_NAME));
 		psmouse->rate = 40;
 	}
 #endif
diff -urN linux-2.6.13-rc4/drivers/input/serio/Kconfig linux-2.6.13-rc5/drivers/input/serio/Kconfig
--- linux-2.6.13-rc4/drivers/input/serio/Kconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/serio/Kconfig	2005-08-01 22:29:10.849600771 -0700
@@ -175,7 +175,7 @@
 	  allocating minor 1 (that historically corresponds to /dev/psaux)
 	  first. To bind this driver to a serio port use sysfs interface:
 
-	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/driver
+	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called serio_raw.
diff -urN linux-2.6.13-rc4/drivers/input/serio/i8042-x86ia64io.h linux-2.6.13-rc5/drivers/input/serio/i8042-x86ia64io.h
--- linux-2.6.13-rc4/drivers/input/serio/i8042-x86ia64io.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/serio/i8042-x86ia64io.h	2005-08-01 22:29:10.849600771 -0700
@@ -131,12 +131,26 @@
 		},
 	},
 	{
+		.ident = "Fujitsu-Siemens Lifebook T3010",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+		},
+	},
+	{
 		.ident = "Toshiba P10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
 		},
 	},
+	{
+		.ident = "Alienware Sentia",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+		},
+	},
 	{ }
 };
 
diff -urN linux-2.6.13-rc4/drivers/input/serio/i8042.c linux-2.6.13-rc5/drivers/input/serio/i8042.c
--- linux-2.6.13-rc4/drivers/input/serio/i8042.c	2005-08-01 22:29:03.820291823 -0700
+++ linux-2.6.13-rc5/drivers/input/serio/i8042.c	2005-08-01 22:29:10.851600859 -0700
@@ -100,7 +100,7 @@
 static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
 	{
 		.disable	= I8042_CTR_KBDDIS,
-		.irqen 		= I8042_CTR_KBDINT,
+		.irqen		= I8042_CTR_KBDINT,
 		.mux		= -1,
 		.name		= "KBD",
 	},
@@ -191,41 +191,45 @@
 static int i8042_command(unsigned char *param, int command)
 {
 	unsigned long flags;
-	int retval = 0, i = 0;
+	int i, retval, auxerr = 0;
 
 	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
 		return -1;
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	retval = i8042_wait_write();
-	if (!retval) {
-		dbg("%02x -> i8042 (command)", command & 0xff);
-		i8042_write_command(command & 0xff);
-	}
+	if ((retval = i8042_wait_write()))
+		goto out;
 
-	if (!retval)
-		for (i = 0; i < ((command >> 12) & 0xf); i++) {
-			if ((retval = i8042_wait_write())) break;
-			dbg("%02x -> i8042 (parameter)", param[i]);
-			i8042_write_data(param[i]);
-		}
+	dbg("%02x -> i8042 (command)", command & 0xff);
+	i8042_write_command(command & 0xff);
 
-	if (!retval)
-		for (i = 0; i < ((command >> 8) & 0xf); i++) {
-			if ((retval = i8042_wait_read())) break;
-			if (i8042_read_status() & I8042_STR_AUXDATA)
-				param[i] = ~i8042_read_data();
-			else
-				param[i] = i8042_read_data();
-			dbg("%02x <- i8042 (return)", param[i]);
+	for (i = 0; i < ((command >> 12) & 0xf); i++) {
+		if ((retval = i8042_wait_write()))
+			goto out;
+		dbg("%02x -> i8042 (parameter)", param[i]);
+		i8042_write_data(param[i]);
+	}
+
+	for (i = 0; i < ((command >> 8) & 0xf); i++) {
+		if ((retval = i8042_wait_read()))
+			goto out;
+
+		if (command == I8042_CMD_AUX_LOOP &&
+		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
+			retval = auxerr = -1;
+			goto out;
 		}
 
-	spin_unlock_irqrestore(&i8042_lock, flags);
+		param[i] = i8042_read_data();
+		dbg("%02x <- i8042 (return)", param[i]);
+	}
 
 	if (retval)
-		dbg("     -- i8042 (timeout)");
+		dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
 
+ out:
+	spin_unlock_irqrestore(&i8042_lock, flags);
 	return retval;
 }
 
@@ -507,17 +511,17 @@
  */
 
 	param = 0xf0;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xf0)
 		return -1;
 	param = mode ? 0x56 : 0xf6;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0xa9 : 0x09))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
 		return -1;
 	param = mode ? 0xa4 : 0xa5;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
 		return -1;
 
 	if (mux_version)
-		*mux_version = ~param;
+		*mux_version = param;
 
 	return 0;
 }
@@ -619,7 +623,7 @@
  */
 
 	param = 0x5a;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5) {
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x5a) {
 
 /*
  * External connection test - filters out AT-soldered PS/2 i8042's
@@ -630,7 +634,7 @@
  */
 
 		if (i8042_command(&param, I8042_CMD_AUX_TEST)
-		    	|| (param && param != 0xfa && param != 0xff))
+			|| (param && param != 0xfa && param != 0xff))
 				return -1;
 	}
 
diff -urN linux-2.6.13-rc4/drivers/input/serio/serio.c linux-2.6.13-rc5/drivers/input/serio/serio.c
--- linux-2.6.13-rc4/drivers/input/serio/serio.c	2005-08-01 22:29:03.821291867 -0700
+++ linux-2.6.13-rc5/drivers/input/serio/serio.c	2005-08-01 22:29:10.853600946 -0700
@@ -389,6 +389,14 @@
 	return sprintf(buf, "%s\n", serio->name);
 }
 
+static ssize_t serio_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	return sprintf(buf, "serio:ty%02Xpr%02Xid%02Xex%02X\n",
+			serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+}
+
 static ssize_t serio_show_id_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
@@ -487,6 +495,7 @@
 
 static struct device_attribute serio_device_attrs[] = {
 	__ATTR(description, S_IRUGO, serio_show_description, NULL),
+	__ATTR(modalias, S_IRUGO, serio_show_modalias, NULL),
 	__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
 	__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
 	__ATTR_NULL
@@ -785,36 +794,37 @@
 
 #ifdef CONFIG_HOTPLUG
 
-#define PUT_ENVP(fmt, val) 						\
-do {									\
-	envp[i++] = buffer;						\
-	length += snprintf(buffer, buffer_size - length, fmt, val);	\
-	if (buffer_size - length <= 0 || i >= num_envp)			\
-		return -ENOMEM;						\
-	length++;							\
-	buffer += length;						\
-} while (0)
+#define SERIO_ADD_HOTPLUG_VAR(fmt, val...)				\
+	do {								\
+		int err = add_hotplug_env_var(envp, num_envp, &i,	\
+					buffer, buffer_size, &len,	\
+					fmt, val);			\
+		if (err)						\
+			return err;					\
+	} while (0)
+
 static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
 {
 	struct serio *serio;
 	int i = 0;
-	int length = 0;
+	int len = 0;
 
 	if (!dev)
 		return -ENODEV;
 
 	serio = to_serio_port(dev);
 
-	PUT_ENVP("SERIO_TYPE=%02x", serio->id.type);
-	PUT_ENVP("SERIO_PROTO=%02x", serio->id.proto);
-	PUT_ENVP("SERIO_ID=%02x", serio->id.id);
-	PUT_ENVP("SERIO_EXTRA=%02x", serio->id.extra);
-
+	SERIO_ADD_HOTPLUG_VAR("SERIO_TYPE=%02x", serio->id.type);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_PROTO=%02x", serio->id.proto);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_ID=%02x", serio->id.id);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_EXTRA=%02x", serio->id.extra);
+	SERIO_ADD_HOTPLUG_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X",
+				serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
 	envp[i] = NULL;
 
 	return 0;
 }
-#undef PUT_ENVP
+#undef SERIO_ADD_HOTPLUG_VAR
 
 #else
 
diff -urN linux-2.6.13-rc4/drivers/input/serio/serio_raw.c linux-2.6.13-rc5/drivers/input/serio/serio_raw.c
--- linux-2.6.13-rc4/drivers/input/serio/serio_raw.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/serio/serio_raw.c	2005-08-01 22:29:10.853600946 -0700
@@ -299,6 +299,7 @@
 
 	serio_raw->dev.minor = PSMOUSE_MINOR;
 	serio_raw->dev.name = serio_raw->name;
+	serio_raw->dev.dev = &serio->dev;
 	serio_raw->dev.fops = &serio_raw_fops;
 
 	err = misc_register(&serio_raw->dev);
diff -urN linux-2.6.13-rc4/drivers/input/touchscreen/Kconfig linux-2.6.13-rc5/drivers/input/touchscreen/Kconfig
--- linux-2.6.13-rc4/drivers/input/touchscreen/Kconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/input/touchscreen/Kconfig	2005-08-01 22:29:10.854600990 -0700
@@ -58,7 +58,7 @@
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called gunze.
+	  module will be called elo.
 
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
diff -urN linux-2.6.13-rc4/drivers/md/dm-table.c linux-2.6.13-rc5/drivers/md/dm-table.c
--- linux-2.6.13-rc4/drivers/md/dm-table.c	2005-08-01 22:29:03.905295559 -0700
+++ linux-2.6.13-rc5/drivers/md/dm-table.c	2005-08-01 22:29:10.939604726 -0700
@@ -869,11 +869,17 @@
 
 void dm_table_presuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 0);
 }
 
 void dm_table_postsuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 1);
 }
 
diff -urN linux-2.6.13-rc4/drivers/md/dm.c linux-2.6.13-rc5/drivers/md/dm.c
--- linux-2.6.13-rc4/drivers/md/dm.c	2005-08-01 22:29:03.906295603 -0700
+++ linux-2.6.13-rc5/drivers/md/dm.c	2005-08-01 22:29:10.940604770 -0700
@@ -55,10 +55,10 @@
  */
 #define DMF_BLOCK_IO 0
 #define DMF_SUSPENDED 1
-#define DMF_FS_LOCKED 2
 
 struct mapped_device {
-	struct rw_semaphore lock;
+	struct rw_semaphore io_lock;
+	struct semaphore suspend_lock;
 	rwlock_t map_lock;
 	atomic_t holders;
 
@@ -248,16 +248,16 @@
  */
 static int queue_io(struct mapped_device *md, struct bio *bio)
 {
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 
 	if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_write(&md->lock);
+		up_write(&md->io_lock);
 		return 1;
 	}
 
 	bio_list_add(&md->deferred, bio);
 
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 	return 0;		/* deferred successfully */
 }
 
@@ -568,14 +568,14 @@
 	int r;
 	struct mapped_device *md = q->queuedata;
 
-	down_read(&md->lock);
+	down_read(&md->io_lock);
 
 	/*
 	 * If we're suspended we have to queue
 	 * this io for later.
 	 */
 	while (test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_read(&md->lock);
+		up_read(&md->io_lock);
 
 		if (bio_rw(bio) == READA) {
 			bio_io_error(bio, bio->bi_size);
@@ -594,11 +594,11 @@
 		 * We're in a while loop, because someone could suspend
 		 * before we get to the following read lock.
 		 */
-		down_read(&md->lock);
+		down_read(&md->io_lock);
 	}
 
 	__split_bio(md, bio);
-	up_read(&md->lock);
+	up_read(&md->io_lock);
 	return 0;
 }
 
@@ -610,7 +610,7 @@
 	int ret = -ENXIO;
 
 	if (map) {
-		ret = dm_table_flush_all(md->map);
+		ret = dm_table_flush_all(map);
 		dm_table_put(map);
 	}
 
@@ -747,7 +747,8 @@
 		goto bad1;
 
 	memset(md, 0, sizeof(*md));
-	init_rwsem(&md->lock);
+	init_rwsem(&md->io_lock);
+	init_MUTEX(&md->suspend_lock);
 	rwlock_init(&md->map_lock);
 	atomic_set(&md->holders, 1);
 	atomic_set(&md->event_nr, 0);
@@ -825,18 +826,13 @@
 	wake_up(&md->eventq);
 }
 
-static void __set_size(struct gendisk *disk, sector_t size)
+static void __set_size(struct mapped_device *md, sector_t size)
 {
-	struct block_device *bdev;
+	set_capacity(md->disk, size);
 
-	set_capacity(disk, size);
-	bdev = bdget_disk(disk, 0);
-	if (bdev) {
-		down(&bdev->bd_inode->i_sem);
-		i_size_write(bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
-		up(&bdev->bd_inode->i_sem);
-		bdput(bdev);
-	}
+	down(&md->frozen_bdev->bd_inode->i_sem);
+	i_size_write(md->frozen_bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
+	up(&md->frozen_bdev->bd_inode->i_sem);
 }
 
 static int __bind(struct mapped_device *md, struct dm_table *t)
@@ -845,17 +841,18 @@
 	sector_t size;
 
 	size = dm_table_get_size(t);
-	__set_size(md->disk, size);
+	__set_size(md, size);
 	if (size == 0)
 		return 0;
 
+	dm_table_get(t);
+	dm_table_event_callback(t, event_callback, md);
+
 	write_lock(&md->map_lock);
 	md->map = t;
+	dm_table_set_restrictions(t, q);
 	write_unlock(&md->map_lock);
 
-	dm_table_get(t);
-	dm_table_event_callback(md->map, event_callback, md);
-	dm_table_set_restrictions(t, q);
 	return 0;
 }
 
@@ -935,7 +932,7 @@
 	struct dm_table *map = dm_get_table(md);
 
 	if (atomic_dec_and_test(&md->holders)) {
-		if (!test_bit(DMF_SUSPENDED, &md->flags) && map) {
+		if (!dm_suspended(md)) {
 			dm_table_presuspend_targets(map);
 			dm_table_postsuspend_targets(map);
 		}
@@ -968,17 +965,17 @@
 {
 	int r = -EINVAL;
 
-	down_write(&md->lock);
+	down(&md->suspend_lock);
 
 	/* device must be suspended */
-	if (!test_bit(DMF_SUSPENDED, &md->flags))
+	if (!dm_suspended(md))
 		goto out;
 
 	__unbind(md);
 	r = __bind(md, table);
 
 out:
-	up_write(&md->lock);
+	up(&md->suspend_lock);
 	return r;
 }
 
@@ -986,16 +983,13 @@
  * Functions to lock and unlock any filesystem running on the
  * device.
  */
-static int __lock_fs(struct mapped_device *md)
+static int lock_fs(struct mapped_device *md)
 {
-	int error = -ENOMEM;
-
-	if (test_and_set_bit(DMF_FS_LOCKED, &md->flags))
-		return 0;
+	int r = -ENOMEM;
 
 	md->frozen_bdev = bdget_disk(md->disk, 0);
 	if (!md->frozen_bdev) {
-		DMWARN("bdget failed in __lock_fs");
+		DMWARN("bdget failed in lock_fs");
 		goto out;
 	}
 
@@ -1003,13 +997,13 @@
 
 	md->frozen_sb = freeze_bdev(md->frozen_bdev);
 	if (IS_ERR(md->frozen_sb)) {
-		error = PTR_ERR(md->frozen_sb);
+		r = PTR_ERR(md->frozen_sb);
 		goto out_bdput;
 	}
 
 	/* don't bdput right now, we don't want the bdev
 	 * to go away while it is locked.  We'll bdput
-	 * in __unlock_fs
+	 * in unlock_fs
 	 */
 	return 0;
 
@@ -1018,15 +1012,11 @@
 	md->frozen_sb = NULL;
 	md->frozen_bdev = NULL;
 out:
-	clear_bit(DMF_FS_LOCKED, &md->flags);
-	return error;
+	return r;
 }
 
-static void __unlock_fs(struct mapped_device *md)
+static void unlock_fs(struct mapped_device *md)
 {
-	if (!test_and_clear_bit(DMF_FS_LOCKED, &md->flags))
-		return;
-
 	thaw_bdev(md->frozen_bdev, md->frozen_sb);
 	bdput(md->frozen_bdev);
 
@@ -1043,50 +1033,37 @@
  */
 int dm_suspend(struct mapped_device *md)
 {
-	struct dm_table *map;
+	struct dm_table *map = NULL;
 	DECLARE_WAITQUEUE(wait, current);
-	int error = -EINVAL;
+	int r = -EINVAL;
 
-	/* Flush I/O to the device. */
-	down_read(&md->lock);
-	if (test_bit(DMF_BLOCK_IO, &md->flags))
-		goto out_read_unlock;
+	down(&md->suspend_lock);
+
+	if (dm_suspended(md))
+		goto out;
 
 	map = dm_get_table(md);
-	if (map)
-		/* This does not get reverted if there's an error later. */
-		dm_table_presuspend_targets(map);
 
-	error = __lock_fs(md);
-	if (error) {
-		dm_table_put(map);
-		goto out_read_unlock;
-	}
+	/* This does not get reverted if there's an error later. */
+	dm_table_presuspend_targets(map);
 
-	up_read(&md->lock);
+	/* Flush I/O to the device. */
+	r = lock_fs(md);
+	if (r)
+		goto out;
 
 	/*
 	 * First we set the BLOCK_IO flag so no more ios will be mapped.
-	 *
-	 * If the flag is already set we know another thread is trying to
-	 * suspend as well, so we leave the fs locked for this thread.
 	 */
-	error = -EINVAL;
-	down_write(&md->lock);
-	if (test_and_set_bit(DMF_BLOCK_IO, &md->flags)) {
-		if (map)
-			dm_table_put(map);
-		goto out_write_unlock;
-	}
+	down_write(&md->io_lock);
+	set_bit(DMF_BLOCK_IO, &md->flags);
 
 	add_wait_queue(&md->wait, &wait);
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 
 	/* unplug */
-	if (map) {
+	if (map)
 		dm_table_unplug_all(map);
-		dm_table_put(map);
-	}
 
 	/*
 	 * Then we wait for the already mapped ios to
@@ -1102,62 +1079,67 @@
 	}
 	set_current_state(TASK_RUNNING);
 
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 	remove_wait_queue(&md->wait, &wait);
 
 	/* were we interrupted ? */
-	error = -EINTR;
-	if (atomic_read(&md->pending))
-		goto out_unfreeze;
+	r = -EINTR;
+	if (atomic_read(&md->pending)) {
+		up_write(&md->io_lock);
+		unlock_fs(md);
+		clear_bit(DMF_BLOCK_IO, &md->flags);
+		goto out;
+	}
+	up_write(&md->io_lock);
 
-	set_bit(DMF_SUSPENDED, &md->flags);
+	dm_table_postsuspend_targets(map);
 
-	map = dm_get_table(md);
-	if (map)
-		dm_table_postsuspend_targets(map);
-	dm_table_put(map);
-	up_write(&md->lock);
+	set_bit(DMF_SUSPENDED, &md->flags);
 
-	return 0;
+	r = 0;
 
-out_unfreeze:
-	__unlock_fs(md);
-	clear_bit(DMF_BLOCK_IO, &md->flags);
-out_write_unlock:
-	up_write(&md->lock);
-	return error;
-
-out_read_unlock:
-	up_read(&md->lock);
-	return error;
+out:
+	dm_table_put(map);
+	up(&md->suspend_lock);
+	return r;
 }
 
 int dm_resume(struct mapped_device *md)
 {
+	int r = -EINVAL;
 	struct bio *def;
-	struct dm_table *map = dm_get_table(md);
+	struct dm_table *map = NULL;
 
-	down_write(&md->lock);
-	if (!map ||
-	    !test_bit(DMF_SUSPENDED, &md->flags) ||
-	    !dm_table_get_size(map)) {
-		up_write(&md->lock);
-		dm_table_put(map);
-		return -EINVAL;
-	}
+	down(&md->suspend_lock);
+	if (!dm_suspended(md))
+		goto out;
+
+	map = dm_get_table(md);
+	if (!map || !dm_table_get_size(map))
+		goto out;
 
 	dm_table_resume_targets(map);
-	clear_bit(DMF_SUSPENDED, &md->flags);
+
+	down_write(&md->io_lock);
 	clear_bit(DMF_BLOCK_IO, &md->flags);
 
 	def = bio_list_get(&md->deferred);
 	__flush_deferred_io(md, def);
-	up_write(&md->lock);
-	__unlock_fs(md);
+	up_write(&md->io_lock);
+
+	unlock_fs(md);
+
+	clear_bit(DMF_SUSPENDED, &md->flags);
+
 	dm_table_unplug_all(map);
+
+	r = 0;
+
+out:
 	dm_table_put(map);
+	up(&md->suspend_lock);
 
-	return 0;
+	return r;
 }
 
 /*-----------------------------------------------------------------
diff -urN linux-2.6.13-rc4/drivers/md/raid5.c linux-2.6.13-rc5/drivers/md/raid5.c
--- linux-2.6.13-rc4/drivers/md/raid5.c	2005-08-01 22:29:03.914295955 -0700
+++ linux-2.6.13-rc5/drivers/md/raid5.c	2005-08-01 22:29:10.948605122 -0700
@@ -1653,6 +1653,7 @@
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (!conf->chunk_size || conf->chunk_size % 4) {
 		printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
diff -urN linux-2.6.13-rc4/drivers/md/raid6main.c linux-2.6.13-rc5/drivers/md/raid6main.c
--- linux-2.6.13-rc4/drivers/md/raid6main.c	2005-08-01 22:29:03.915295999 -0700
+++ linux-2.6.13-rc5/drivers/md/raid6main.c	2005-08-01 22:29:10.949605166 -0700
@@ -1813,6 +1813,7 @@
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (conf->raid_disks < 4) {
 		printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
diff -urN linux-2.6.13-rc4/drivers/media/video/bttv-driver.c linux-2.6.13-rc5/drivers/media/video/bttv-driver.c
--- linux-2.6.13-rc4/drivers/media/video/bttv-driver.c	2005-08-01 22:29:03.999299691 -0700
+++ linux-2.6.13-rc5/drivers/media/video/bttv-driver.c	2005-08-01 22:29:11.041609210 -0700
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
+    $Id: bttv-driver.c,v 1.45 2005/07/20 19:43:24 mkrufky Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -3869,11 +3869,6 @@
         pci_set_master(dev);
 	pci_set_command(dev);
 	pci_set_drvdata(dev,btv);
-	if (!pci_dma_supported(dev,0xffffffff)) {
-		printk("bttv%d: Oops: no 32bit PCI DMA ???\n", btv->c.nr);
-		result = -EIO;
-		goto fail1;
-	}
 
         pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
diff -urN linux-2.6.13-rc4/drivers/media/video/bttv.h linux-2.6.13-rc5/drivers/media/video/bttv.h
--- linux-2.6.13-rc4/drivers/media/video/bttv.h	2005-08-01 22:29:04.001299779 -0700
+++ linux-2.6.13-rc5/drivers/media/video/bttv.h	2005-08-01 22:29:11.042609254 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $
+ * $Id: bttv.h,v 1.22 2005/07/28 18:41:21 mchehab Exp $
  *
  *  bttv - Bt848 frame grabber driver
  *
@@ -135,7 +135,9 @@
 #define BTTV_DVICO_DVBT_LITE  0x80
 #define BTTV_TIBET_CS16  0x83
 #define BTTV_KODICOM_4400R  0x84
-#define BTTV_ADLINK_RTV24   0x85
+#define BTTV_ADLINK_RTV24   0x86
+#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87
+#define BTTV_ACORP_Y878F   0x88
 
 /* i2c address list */
 #define I2C_TSA5522        0xc2
diff -urN linux-2.6.13-rc4/drivers/media/video/bttvp.h linux-2.6.13-rc5/drivers/media/video/bttvp.h
--- linux-2.6.13-rc4/drivers/media/video/bttvp.h	2005-08-01 22:29:04.001299779 -0700
+++ linux-2.6.13-rc5/drivers/media/video/bttvp.h	2005-08-01 22:29:11.043609298 -0700
@@ -1,5 +1,5 @@
 /*
-    $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $
+    $Id: bttvp.h,v 1.21 2005/07/15 21:44:14 mchehab Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -27,7 +27,7 @@
 #define _BTTVP_H_
 
 #include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,15)
+#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,16)
 
 #include <linux/types.h>
 #include <linux/wait.h>
diff -urN linux-2.6.13-rc4/drivers/media/video/cx88/cx88-cards.c linux-2.6.13-rc5/drivers/media/video/cx88/cx88-cards.c
--- linux-2.6.13-rc4/drivers/media/video/cx88/cx88-cards.c	2005-08-01 22:29:04.004299911 -0700
+++ linux-2.6.13-rc5/drivers/media/video/cx88/cx88-cards.c	2005-08-01 22:29:11.046609429 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-cards.c,v 1.86 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: cx88-cards.c,v 1.90 2005/07/28 02:47:42 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * card-specific stuff.
@@ -90,6 +90,9 @@
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
 		}},
 	},
 	[CX88_BOARD_PIXELVIEW] = {
@@ -496,6 +499,9 @@
 		.input          = {{
                         .type   = CX88_VMUX_DVB,
                         .vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
                 }},
 		.dvb            = 1,
 	},
@@ -753,6 +759,27 @@
 		}},
 		.dvb            = 1,
 	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = {
+		.name           = "DViCO FusionHDTV 5 Gold",
+		.tuner_type     = TUNER_LG_TDVS_H062F,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		/*  See DViCO FusionHDTV 3 Gold-Q for GPIO documentation.  */
+		.input          = {{
+                        .type   = CX88_VMUX_TELEVISION,
+                        .vmux   = 0,
+                        .gpio0  = 0x0f0d,
+                },{
+                        .type   = CX88_VMUX_COMPOSITE1,
+                        .vmux   = 1,
+                        .gpio0  = 0x0f00,
+                },{
+                        .type   = CX88_VMUX_SVIDEO,
+                        .vmux   = 2,
+                        .gpio0  = 0x0f00,
+                }},
+	},
 };
 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
 
@@ -880,6 +907,10 @@
 		.subvendor = 0x153b,
 		.subdevice = 0x1166,
 		.card      = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1,
+ 	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD,
 	},
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
diff -urN linux-2.6.13-rc4/drivers/media/video/cx88/cx88-video.c linux-2.6.13-rc5/drivers/media/video/cx88/cx88-video.c
--- linux-2.6.13-rc4/drivers/media/video/cx88/cx88-video.c	2005-08-01 22:29:04.011300218 -0700
+++ linux-2.6.13-rc5/drivers/media/video/cx88/cx88-video.c	2005-08-01 22:29:11.082611012 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-video.c,v 1.80 2005/07/13 08:49:08 mchehab Exp $
+ * $Id: cx88-video.c,v 1.82 2005/07/22 05:13:34 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * video4linux video interface
@@ -758,10 +758,10 @@
 		struct cx88_core *core = dev->core;
 		int board = core->board;
 		dprintk(1,"video_open: setting radio device\n");
+		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
 		cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
 		cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
-		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		dev->core->tvaudio = WW_FM;
 		cx88_set_tvaudio(core);
 		cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
diff -urN linux-2.6.13-rc4/drivers/media/video/cx88/cx88.h linux-2.6.13-rc5/drivers/media/video/cx88/cx88.h
--- linux-2.6.13-rc4/drivers/media/video/cx88/cx88.h	2005-08-01 22:29:04.012300262 -0700
+++ linux-2.6.13-rc5/drivers/media/video/cx88/cx88.h	2005-08-01 22:29:11.082611012 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88.h,v 1.69 2005/07/13 17:25:25 mchehab Exp $
+ * $Id: cx88.h,v 1.70 2005/07/24 17:44:09 mkrufky Exp $
  *
  * v4l2 device driver for cx2388x based TV cards
  *
@@ -171,6 +171,7 @@
 #define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T  28
 #define CX88_BOARD_ADSTECH_DVB_T_PCI          29
 #define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1  30
+#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
diff -urN linux-2.6.13-rc4/drivers/media/video/msp3400.c linux-2.6.13-rc5/drivers/media/video/msp3400.c
--- linux-2.6.13-rc4/drivers/media/video/msp3400.c	2005-08-01 22:29:04.014300350 -0700
+++ linux-2.6.13-rc5/drivers/media/video/msp3400.c	2005-08-01 22:29:11.084611100 -0700
@@ -741,11 +741,9 @@
 			schedule_timeout(msecs_to_jiffies(timeout));
 		}
 	}
-	if (current->flags & PF_FREEZE) {
-		refrigerator ();
-	}
 
 	remove_wait_queue(&msp->wq, &wait);
+	try_to_freeze();
 	return msp->restart;
 }
 
diff -urN linux-2.6.13-rc4/drivers/media/video/saa7134/saa7134-i2c.c linux-2.6.13-rc5/drivers/media/video/saa7134/saa7134-i2c.c
--- linux-2.6.13-rc4/drivers/media/video/saa7134/saa7134-i2c.c	2005-08-01 22:29:04.026300878 -0700
+++ linux-2.6.13-rc5/drivers/media/video/saa7134/saa7134-i2c.c	2005-08-01 22:29:11.122612770 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134-i2c.c,v 1.19 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: saa7134-i2c.c,v 1.22 2005/07/22 04:09:41 mkrufky Exp $
  *
  * device driver for philips saa7134 based TV cards
  * i2c interface support
@@ -300,6 +300,8 @@
   	status = i2c_get_status(dev);
 	if (i2c_is_error(status))
 		goto err;
+	/* ensure that the bus is idle for at least one bit slot */
+	msleep(1);
 
 	d1printk("\n");
 	return num;
diff -urN linux-2.6.13-rc4/drivers/media/video/saa7134/saa7134.h linux-2.6.13-rc5/drivers/media/video/saa7134/saa7134.h
--- linux-2.6.13-rc4/drivers/media/video/saa7134/saa7134.h	2005-08-01 22:29:04.031301098 -0700
+++ linux-2.6.13-rc5/drivers/media/video/saa7134/saa7134.h	2005-08-01 22:29:11.128613034 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134.h,v 1.48 2005/07/01 08:22:24 nsh Exp $
+ * $Id: saa7134.h,v 1.49 2005/07/13 17:25:25 mchehab Exp $
  *
  * v4l2 device driver for philips saa7134 based TV cards
  *
@@ -21,7 +21,7 @@
  */
 
 #include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,13)
+#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,14)
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff -urN linux-2.6.13-rc4/drivers/media/video/tea5767.c linux-2.6.13-rc5/drivers/media/video/tea5767.c
--- linux-2.6.13-rc4/drivers/media/video/tea5767.c	2005-08-01 22:29:04.034301229 -0700
+++ linux-2.6.13-rc5/drivers/media/video/tea5767.c	2005-08-01 22:29:11.131613165 -0700
@@ -2,7 +2,7 @@
  * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
  * I2C address is allways 0xC0.
  *
- * $Id: tea5767.c,v 1.21 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tea5767.c,v 1.27 2005/07/31 12:10:56 mchehab Exp $
  *
  * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
  * This code is placed under the terms of the GNU General Public License
@@ -15,7 +15,6 @@
 #include <linux/videodev.h>
 #include <linux/delay.h>
 #include <media/tuner.h>
-#include <media/tuner.h>
 
 #define PREFIX "TEA5767 "
 
@@ -293,16 +292,16 @@
 
 int tea5767_autodetection(struct i2c_client *c)
 {
-	unsigned char buffer[5] = { 0xff, 0xff, 0xff, 0xff, 0xff };
+	unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	int rc;
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (5 != (rc = i2c_master_recv(c, buffer, 5))) {
+	if (7 != (rc = i2c_master_recv(c, buffer, 7))) {
 		tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
 		return EINVAL;
 	}
 
-	/* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+	/* If all bytes are the same then it's a TV tuner and not a tea5767 */
 	if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
 	    buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
 		tuner_warn("All bytes are equal. It is not a TEA5767\n");
@@ -318,6 +317,17 @@
 		tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
 		return EINVAL;
 	}
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
+
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
 
 	tuner_warn("TEA5767 detected.\n");
 	return 0;
@@ -327,10 +337,8 @@
 {
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (tea5767_autodetection(c) == EINVAL)
-		return EINVAL;
-
-	tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
+	tuner_info("type set to %d (%s)\n", t->type,
+			"Philips TEA5767HN FM Radio");
 	strlcpy(c->name, "tea5767", sizeof(c->name));
 
 	t->tv_freq = set_tv_freq;
diff -urN linux-2.6.13-rc4/drivers/media/video/tuner-core.c linux-2.6.13-rc5/drivers/media/video/tuner-core.c
--- linux-2.6.13-rc4/drivers/media/video/tuner-core.c	2005-08-01 22:29:04.036301317 -0700
+++ linux-2.6.13-rc5/drivers/media/video/tuner-core.c	2005-08-01 22:29:11.133613253 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-core.c,v 1.58 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tuner-core.c,v 1.63 2005/07/28 18:19:55 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * core core, i.e. kernel interfaces, registering and so on
@@ -23,6 +23,8 @@
 #include <media/tuner.h>
 #include <media/audiochip.h>
 
+#include "msp3400.h"
+
 #define UNSET (-1U)
 
 /* standard i2c insmod options */
@@ -42,6 +44,9 @@
 static unsigned int no_autodetect = 0;
 module_param(no_autodetect, int, 0444);
 
+static unsigned int show_i2c = 0;
+module_param(show_i2c, int, 0444);
+
 /* insmod options used at runtime => read/write */
 unsigned int tuner_debug = 0;
 module_param(tuner_debug, int, 0644);
@@ -320,6 +325,17 @@
 
 	tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name);
 
+	if (show_i2c) {
+		unsigned char buffer[16];
+		int i,rc;
+
+		memset(buffer, 0, sizeof(buffer));
+		rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer));
+		printk("tuner-%04x I2C RECV = ",addr);
+		for (i=0;i<rc;i++)
+			printk("%02x ",buffer[i]);
+		printk("\n");
+	}
 	/* TEA5767 autodetection code - only for addr = 0xc0 */
 	if (!no_autodetect) {
 		if (addr == 0x60) {
@@ -451,6 +467,17 @@
 			break;
 		}
 		break;
+	case VIDIOCSAUDIO:
+		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+			return 0;
+		if (check_v4l2(t) == EINVAL)
+			return 0;
+
+		/* Should be implemented, since bttv calls it */
+		tuner_dbg("VIDIOCSAUDIO not implemented.\n");
+
+		break;
+	case MSP_SET_MATRIX:
 	case TDA9887_SET_CONFIG:
 		break;
 	/* --- v4l ioctls --- */
diff -urN linux-2.6.13-rc4/drivers/media/video/tuner-simple.c linux-2.6.13-rc5/drivers/media/video/tuner-simple.c
--- linux-2.6.13-rc4/drivers/media/video/tuner-simple.c	2005-08-01 22:29:04.037301361 -0700
+++ linux-2.6.13-rc5/drivers/media/video/tuner-simple.c	2005-08-01 22:29:11.133613253 -0700
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-simple.c,v 1.39 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: tuner-simple.c,v 1.43 2005/07/28 18:41:21 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * controls all those simple 4-control-bytes style tuners.
@@ -245,6 +245,12 @@
           /* see tea5767.c for details */},
 	{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
 	  16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
+
+	{ "LG TDVS-H062F/TUA6034", LGINNOTEK, NTSC,
+	  16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732},
+
+	{ "Ymec TVF66T5-B/DFF", Philips, PAL,
+          16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623},
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
diff -urN linux-2.6.13-rc4/drivers/media/video/tveeprom.c linux-2.6.13-rc5/drivers/media/video/tveeprom.c
--- linux-2.6.13-rc4/drivers/media/video/tveeprom.c	2005-08-01 22:29:04.039301449 -0700
+++ linux-2.6.13-rc5/drivers/media/video/tveeprom.c	2005-08-01 22:29:11.135613341 -0700
@@ -189,7 +189,7 @@
 	{ TUNER_ABSENT,        "Philips FQ1236 MK3"},
 	{ TUNER_ABSENT,        "Samsung TCPN 2121P30A"},
 	{ TUNER_ABSENT,        "Samsung TCPE 4121P30A"},
-	{ TUNER_ABSENT,        "TCL MFPE05 2"},
+	{ TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"},
 	/* 90-99 */
 	{ TUNER_ABSENT,        "LG TALN H202T"},
 	{ TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"},
diff -urN linux-2.6.13-rc4/drivers/net/cs89x0.c linux-2.6.13-rc5/drivers/net/cs89x0.c
--- linux-2.6.13-rc4/drivers/net/cs89x0.c	2005-08-01 22:29:04.162306855 -0700
+++ linux-2.6.13-rc5/drivers/net/cs89x0.c	2005-08-01 22:29:11.389624505 -0700
@@ -417,6 +417,7 @@
 	struct net_local *lp = netdev_priv(dev);
 	static unsigned version_printed;
 	int i;
+	int tmp;
 	unsigned rev_type = 0;
 	int eeprom_buff[CHKSUM_LEN];
 	int retval;
@@ -492,14 +493,17 @@
 				goto out2;
 			}
 	}
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+	printk(KERN_DEBUG "PP_addr at %x: 0x%x\n",
+			ioaddr + ADD_PORT, inw(ioaddr + ADD_PORT));
 
 	ioaddr &= ~3;
 	outw(PP_ChipID, ioaddr + ADD_PORT);
 
-	if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
-		printk(KERN_ERR "%s: incorrect signature 0x%x\n",
-			dev->name, inw(ioaddr + DATA_PORT));
+	tmp = inw(ioaddr + DATA_PORT);
+	if (tmp != CHIP_EISA_ID_SIG) {
+		printk(KERN_DEBUG "%s: incorrect signature at %x: 0x%x!="
+			CHIP_EISA_ID_SIG_STR "\n",
+			dev->name, ioaddr + DATA_PORT, tmp);
   		retval = -ENODEV;
   		goto out2;
 	}
diff -urN linux-2.6.13-rc4/drivers/net/cs89x0.h linux-2.6.13-rc5/drivers/net/cs89x0.h
--- linux-2.6.13-rc4/drivers/net/cs89x0.h	2005-08-01 22:29:04.163306899 -0700
+++ linux-2.6.13-rc5/drivers/net/cs89x0.h	2005-08-01 22:29:11.390624549 -0700
@@ -93,6 +93,7 @@
 #endif
 
 #define CHIP_EISA_ID_SIG 0x630E   /*  Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+#define CHIP_EISA_ID_SIG_STR "0x630E"
 
 #ifdef IBMEIPKT
 #define EISA_ID_SIG 0x4D24	/*  IBM */
diff -urN linux-2.6.13-rc4/drivers/net/hamradio/Kconfig linux-2.6.13-rc5/drivers/net/hamradio/Kconfig
--- linux-2.6.13-rc4/drivers/net/hamradio/Kconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/net/hamradio/Kconfig	2005-08-01 22:29:11.428626220 -0700
@@ -17,7 +17,7 @@
 
 config 6PACK
 	tristate "Serial port 6PACK driver"
-	depends on AX25 && BROKEN_ON_SMP
+	depends on AX25
 	---help---
 	  6pack is a transmission protocol for the data exchange between your
 	  PC and your TNC (the Terminal Node Controller acts as a kind of
diff -urN linux-2.6.13-rc4/drivers/net/sk98lin/skge.c linux-2.6.13-rc5/drivers/net/sk98lin/skge.c
--- linux-2.6.13-rc4/drivers/net/sk98lin/skge.c	2005-08-01 22:29:04.257311031 -0700
+++ linux-2.6.13-rc5/drivers/net/sk98lin/skge.c	2005-08-01 22:29:11.487628813 -0700
@@ -5133,6 +5133,84 @@
 	kfree(pAC);
 }
 
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+
+	if (netif_running(dev)) {
+		netif_carrier_off(dev);
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+		netif_device_detach(dev);
+	}
+	if (otherdev != dev) {
+		if (netif_running(otherdev)) {
+			netif_carrier_off(otherdev);
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
+			netif_device_detach(otherdev);
+		}
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+		free_irq(dev->irq, dev);
+	}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_device(pdev);
+	pci_set_master(pdev);
+	if (pAC->GIni.GIMacsFound == 2)
+		ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+	else
+		ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+	if (ret) {
+		printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+		pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+		dev->irq = 0;
+		pci_disable_device(pdev);
+		return -EBUSY;
+	}
+
+	netif_device_attach(dev);
+	if (netif_running(dev)) {
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvInitAdapter(pAC, 0);    /* first device  */
+	}
+	if (otherdev != dev) {
+		netif_device_attach(otherdev);
+		if (netif_running(otherdev)) {
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvInitAdapter(pAC, 1);    /* second device  */
+		}
+	}
+
+	return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
 static struct pci_device_id skge_pci_tbl[] = {
 	{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5158,6 +5236,8 @@
 	.id_table	= skge_pci_tbl,
 	.probe		= skge_probe_one,
 	.remove		= __devexit_p(skge_remove_one),
+	.suspend	= skge_suspend,
+	.resume		= skge_resume,
 };
 
 static int __init skge_init(void)
diff -urN linux-2.6.13-rc4/drivers/net/sk98lin/skgeinit.c linux-2.6.13-rc5/drivers/net/sk98lin/skgeinit.c
--- linux-2.6.13-rc4/drivers/net/sk98lin/skgeinit.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/net/sk98lin/skgeinit.c	2005-08-01 22:29:11.488628857 -0700
@@ -2016,7 +2016,7 @@
 	 * we set the PHY to coma mode and switch to D3 power state.
 	 */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* for all ports switch PHY to coma mode */
 		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
diff -urN linux-2.6.13-rc4/drivers/net/sk98lin/skxmac2.c linux-2.6.13-rc5/drivers/net/sk98lin/skxmac2.c
--- linux-2.6.13-rc4/drivers/net/sk98lin/skxmac2.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/net/sk98lin/skxmac2.c	2005-08-01 22:29:11.490628945 -0700
@@ -1065,7 +1065,7 @@
 	
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -1110,7 +1110,7 @@
 
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -2126,7 +2126,7 @@
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-	    pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+	    pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
@@ -2253,7 +2253,7 @@
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
diff -urN linux-2.6.13-rc4/drivers/net/skge.c linux-2.6.13-rc5/drivers/net/skge.c
--- linux-2.6.13-rc4/drivers/net/skge.c	2005-08-01 22:29:04.282312130 -0700
+++ linux-2.6.13-rc5/drivers/net/skge.c	2005-08-01 22:29:11.515630043 -0700
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"0.7"
+#define DRV_VERSION		"0.8"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -55,7 +55,7 @@
 #define ETH_JUMBO_MTU		9000
 #define TX_WATCHDOG		(5 * HZ)
 #define NAPI_WEIGHT		64
-#define BLINK_HZ		(HZ/4)
+#define BLINK_MS		250
 
 MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
 MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -75,7 +75,6 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx  */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
@@ -249,7 +248,7 @@
 	} else {
 		u32 setting;
 
-		switch(ecmd->speed) {
+		switch (ecmd->speed) {
 		case SPEED_1000:
 			if (ecmd->duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
@@ -620,84 +619,98 @@
 	return 0;
 }
 
-static void skge_led_on(struct skge_hw *hw, int port)
+enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
+static void skge_led(struct skge_port *skge, enum led_mode mode)
 {
+	struct skge_hw *hw = skge->hw;
+	int port = skge->port;
+
+	spin_lock_bh(&hw->phy_lock);
 	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-		skge_write8(hw, B0_LED, LED_STAT_ON);
+		switch (mode) {
+		case LED_MODE_OFF:
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+			break;
 
-		skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+		case LED_MODE_ON:
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
 
-		/* For Broadcom Phy only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
-	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_ON)  |
-				  PHY_M_LED_MO_10(MO_LED_ON)   |
-				  PHY_M_LED_MO_100(MO_LED_ON)  |
-				  PHY_M_LED_MO_1000(MO_LED_ON) |
-				  PHY_M_LED_MO_RX(MO_LED_ON));
-	}
-}
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+			skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
 
-static void skge_led_off(struct skge_hw *hw, int port)
-{
-	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
-		skge_write8(hw, B0_LED, LED_STAT_OFF);
+			break;
 
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+		case LED_MODE_TST:
+			skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
 
-		/* Broadcom only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
+			break;
+		}
 	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_OFF)  |
-				  PHY_M_LED_MO_10(MO_LED_OFF)   |
-				  PHY_M_LED_MO_100(MO_LED_OFF)  |
-				  PHY_M_LED_MO_1000(MO_LED_OFF) |
-				  PHY_M_LED_MO_RX(MO_LED_OFF));
+		switch (mode) {
+		case LED_MODE_OFF:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_OFF)  |
+				     PHY_M_LED_MO_10(MO_LED_OFF)   |
+				     PHY_M_LED_MO_100(MO_LED_OFF)  |
+				     PHY_M_LED_MO_1000(MO_LED_OFF) |
+				     PHY_M_LED_MO_RX(MO_LED_OFF));
+			break;
+		case LED_MODE_ON:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
+				     PHY_M_LED_PULS_DUR(PULS_170MS) |
+				     PHY_M_LED_BLINK_RT(BLINK_84MS) |
+				     PHY_M_LEDC_TX_CTRL |
+				     PHY_M_LEDC_DP_CTRL);
+		
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_RX(MO_LED_OFF) |
+				     (skge->speed == SPEED_100 ?
+				      PHY_M_LED_MO_100(MO_LED_ON) : 0));
+			break;
+		case LED_MODE_TST:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_ON)  |
+				     PHY_M_LED_MO_10(MO_LED_ON)   |
+				     PHY_M_LED_MO_100(MO_LED_ON)  |
+				     PHY_M_LED_MO_1000(MO_LED_ON) |
+				     PHY_M_LED_MO_RX(MO_LED_ON));
+		}
 	}
-}
-
-static void skge_blink_timer(unsigned long data)
-{
-	struct skge_port *skge = (struct skge_port *) data;
-	struct skge_hw *hw = skge->hw;
-	unsigned long flags;
-
-	spin_lock_irqsave(&hw->phy_lock, flags);
-	if (skge->blink_on)
-		skge_led_on(hw, skge->port);
-	else
-		skge_led_off(hw, skge->port);
-	spin_unlock_irqrestore(&hw->phy_lock, flags);
-
-	skge->blink_on = !skge->blink_on;
-	mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+	spin_unlock_bh(&hw->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int skge_phys_id(struct net_device *dev, u32 data)
 {
 	struct skge_port *skge = netdev_priv(dev);
+	unsigned long ms;
+	enum led_mode mode = LED_MODE_TST;
 
 	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+		ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
+	else
+		ms = data * 1000;
 
-	/* start blinking */
-	skge->blink_on = 1;
-	mod_timer(&skge->led_blink, jiffies+1);
+	while (ms > 0) {
+		skge_led(skge, mode);
+		mode ^= LED_MODE_TST;
 
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&skge->led_blink);
+		if (msleep_interruptible(BLINK_MS))
+			break;
+		ms -= BLINK_MS;
+	}
 
-	skge_led_off(skge->hw, skge->port);
+	/* back to regular LED state */
+	skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
 
 	return 0;
 }
@@ -1028,7 +1041,7 @@
 			}
 
 			/* Check Duplex mismatch */
-			switch(aux & PHY_B_AS_AN_RES_MSK) {
+			switch (aux & PHY_B_AS_AN_RES_MSK) {
 			case PHY_B_RES_1000FD:
 				skge->duplex = DUPLEX_FULL;
 				break;
@@ -1099,7 +1112,7 @@
 	r |=  XM_MMU_NO_PRE;
 	xm_write16(hw, port, XM_MMU_CMD,r);
 
-	switch(id1) {
+	switch (id1) {
 	case PHY_BCOM_ID1_C0:
 		/*
 		 * Workaround BCOM Errata for the C0 type.
@@ -1194,13 +1207,6 @@
 	xm_write16(hw, port, XM_STAT_CMD,
 			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
 
-	/* initialize Rx, Tx and Link LED */
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
-
-	skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
-	skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-
 	/* Unreset the XMAC. */
 	skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1209,7 +1215,6 @@
 	 * namely for the 1000baseTX cards that use the XMAC's
 	 * GMII mode.
 	 */
-	spin_lock_bh(&hw->phy_lock);
 	/* Take external Phy out of reset */
 	r = skge_read32(hw, B2_GP_IO);
 	if (port == 0)
@@ -1219,7 +1224,6 @@
 
 	skge_write32(hw, B2_GP_IO, r);
 	skge_read32(hw, B2_GP_IO);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* Enable GMII interfac */
 	xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1569,7 +1573,6 @@
 {
 	struct skge_port *skge = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv;
-	u16 ledctrl, ledover;
 
 	pr_debug("yukon_init\n");
 	if (skge->autoneg == AUTONEG_ENABLE) {
@@ -1641,32 +1644,11 @@
 	gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
 	gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
 
-	/* Setup Phy LED's */
-	ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
-	ledover = 0;
-
-	ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
-	/* turn off the Rx LED (LED_RX) */
-	ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-
-	/* disable blink mode (LED_DUPLEX) on collisions */
-	ctrl |= PHY_M_LEDC_DP_CTRL;
-	gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-
-	if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
-		/* turn on 100 Mbps LED (LED_LINK100) */
-		ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-	}
-
-	if (ledover)
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
 	/* Enable phy interrupt on autonegotiation complete (or link up) */
 	if (skge->autoneg == AUTONEG_ENABLE)
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
 	else
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 }
 
 static void yukon_reset(struct skge_hw *hw, int port)
@@ -1691,7 +1673,7 @@
 
 	/* WA code for COMA mode -- set PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
 
@@ -1701,7 +1683,7 @@
 
 	/* WA code for COMA mode -- clear PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9)
 			     & ~GP_IO_9);
@@ -1745,9 +1727,7 @@
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 	skge_read16(hw, GMAC_IRQ_SRC);
 
-	spin_lock_bh(&hw->phy_lock);
 	yukon_init(hw, port);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* MIB clear */
 	reg = gma_read16(hw, port, GM_PHY_ADDR);
@@ -1796,7 +1776,7 @@
 	skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
 	reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		reg &= ~GMF_RX_F_FL_ON;
 	skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
 	skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
@@ -1813,19 +1793,19 @@
 	int port = skge->port;
 
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3) {
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
 		skge_write32(hw, B2_GP_IO,
 			     skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
 	}
 
 	gma_write16(hw, port, GM_GP_CTRL,
 			 gma_read16(hw, port, GM_GP_CTRL)
-			 & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+			 & ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA));
 	gma_read16(hw, port, GM_GP_CTRL);
 
 	/* set GPHY Control reset */
-	gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
-	gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+	skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 }
 
 static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1856,11 +1836,12 @@
 
 	if (status & GM_IS_RX_FF_OR) {
 		++skge->net_stats.rx_fifo_errors;
-		gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
 	}
+
 	if (status & GM_IS_TX_FF_UR) {
 		++skge->net_stats.tx_fifo_errors;
-		gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
 	}
 
 }
@@ -1896,7 +1877,7 @@
 	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 
-	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 	skge_link_up(skge);
 }
 
@@ -1904,12 +1885,14 @@
 {
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
+	u16 ctrl;
 
 	pr_debug("yukon_link_down\n");
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
-	gm_phy_write(hw, port, GM_GP_CTRL,
-			  gm_phy_read(hw, port, GM_GP_CTRL)
-			  & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+	ctrl = gma_read16(hw, port, GM_GP_CTRL);
+	ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+	gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
 	if (skge->flow_control == FLOW_MODE_REM_SEND) {
 		/* restore Asymmetric Pause bit */
@@ -2097,10 +2080,12 @@
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
 
 	/* Initialze MAC */
+	spin_lock_bh(&hw->phy_lock);
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		genesis_mac_init(hw, port);
 	else
 		yukon_mac_init(hw, port);
+	spin_unlock_bh(&hw->phy_lock);
 
 	/* Configure RAMbuffers */
 	chunk = hw->ram_size / ((hw->ports + 1)*2);
@@ -2116,6 +2101,7 @@
 	/* Start receiver BMU */
 	wmb();
 	skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+	skge_led(skge, LED_MODE_ON);
 
 	pr_debug("skge_up completed\n");
 	return 0;
@@ -2140,8 +2126,6 @@
 
 	netif_stop_queue(dev);
 
-	del_timer_sync(&skge->led_blink);
-
 	/* Stop transmitter */
 	skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
 	skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@@ -2175,15 +2159,12 @@
 	if (hw->chip_id == CHIP_ID_GENESIS) {
 		skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
 		skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
-		skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
 	} else {
 		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 	}
 
-	/* turn off led's */
-	skge_write16(hw, B0_LED, LED_STAT_OFF);
+	skge_led(skge, LED_MODE_OFF);
 
 	skge_tx_clean(skge);
 	skge_rx_clean(skge);
@@ -2633,11 +2614,17 @@
 	spin_unlock(&skge->tx_lock);
 }
 
+/* Parity errors seem to happen when Genesis is connected to a switch
+ * with no other ports present. Heartbeat error??
+ */
 static void skge_mac_parity(struct skge_hw *hw, int port)
 {
-	printk(KERN_ERR PFX "%s: mac data parity error\n",
-	       hw->dev[port] ? hw->dev[port]->name
-	       : (port == 0 ? "(port A)": "(port B"));
+	struct net_device *dev = hw->dev[port];
+
+	if (dev) {
+		struct skge_port *skge = netdev_priv(dev);
+		++skge->net_stats.tx_heartbeat_errors;
+	}
 
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -3083,10 +3070,6 @@
 
 	spin_lock_init(&skge->tx_lock);
 
-	init_timer(&skge->led_blink);
-	skge->led_blink.function = skge_blink_timer;
-	skge->led_blink.data = (unsigned long) skge;
-
 	if (hw->chip_id != CHIP_ID_GENESIS) {
 		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		skge->rx_csum = 1;
diff -urN linux-2.6.13-rc4/drivers/net/skge.h linux-2.6.13-rc5/drivers/net/skge.h
--- linux-2.6.13-rc4/drivers/net/skge.h	2005-08-01 22:29:04.287312350 -0700
+++ linux-2.6.13-rc5/drivers/net/skge.h	2005-08-01 22:29:11.520630263 -0700
@@ -1449,10 +1449,12 @@
 	PHY_M_IS_DTE_CHANGE	= 1<<2, /* DTE Power Det. Status Changed */
 	PHY_M_IS_POL_CHANGE	= 1<<1, /* Polarity Changed */
 	PHY_M_IS_JABBER		= 1<<0, /* Jabber */
-};
 
-#define PHY_M_DEF_MSK	( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
-			  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+	PHY_M_IS_DEF_MSK	= PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE |
+				  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR,
+
+	PHY_M_IS_AN_MSK		= PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
 
 /*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
 enum {
@@ -1509,7 +1511,7 @@
 	PHY_M_LEDC_TX_C_MSB	= 1<<0, /* Tx Control (MSB, 88E1111 only) */
 };
 
-#define PHY_M_LED_PULS_DUR(x)	(	((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x)	(((x)<<12) & PHY_M_LEDC_PULS_MSK)
 
 enum {
 	PULS_NO_STR	= 0,/* no pulse stretching */
@@ -1522,7 +1524,7 @@
 	PULS_1300MS	= 7,/* 1.3 s to 2.7 s */
 };
 
-#define PHY_M_LED_BLINK_RT(x)	(	((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x)	(((x)<<8) & PHY_M_LEDC_BL_R_MSK)
 
 enum {
 	BLINK_42MS	= 0,/* 42 ms */
@@ -1602,9 +1604,9 @@
 	PHY_M_FELP_LED0_MSK = 0xf, /* Bit  3.. 0: LED0 Mask (SPEED) */
 };
 
-#define PHY_M_FELP_LED2_CTRL(x)	(	((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x)	(	((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x)	(	((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x)	(((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x)	(((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x)	(((x)<<0) & PHY_M_FELP_LED0_MSK)
 
 enum {
 	LED_PAR_CTRL_COLX	= 0x00,
@@ -1640,7 +1642,7 @@
 	PHY_M_MAC_MD_COPPER	= 5,/* Copper only */
 	PHY_M_MAC_MD_1000BX	= 7,/* 1000Base-X only */
 };
-#define PHY_M_MAC_MODE_SEL(x)	(	((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x)	(((x)<<7) & PHY_M_MAC_MD_MSK)
 
 /*****  PHY_MARV_PHY_CTRL (page 3)		16 bit r/w	LED Control Reg. *****/
 enum {
@@ -1650,10 +1652,10 @@
 	PHY_M_LEDC_STA0_MSK	= 0xf, /* Bit  3.. 0: STAT0 LED Ctrl. Mask */
 };
 
-#define PHY_M_LEDC_LOS_CTRL(x)	(	((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x)	(	((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x)	(	((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x)	(	((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x)	(((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x)	(((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x)	(((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x)	(((x)<<0) & PHY_M_LEDC_STA0_MSK)
 
 /* GMAC registers  */
 /* Port Registers */
@@ -2505,8 +2507,6 @@
 	dma_addr_t	     dma;
 	unsigned long	     mem_size;
 	unsigned int	     rx_buf_size;
-
-	struct timer_list    led_blink;
 };
 
 
@@ -2606,17 +2606,6 @@
 	skge_write16(hw, SK_GMAC_REG(port,r), v);
 }
 
-static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
-{
-	skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
-	skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
-}
-
-static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
-	skge_write8(hw, SK_GMAC_REG(port,r), v);
-}
-
 static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
 				    const u8 *addr)
 {
diff -urN linux-2.6.13-rc4/drivers/net/smc91x.h linux-2.6.13-rc5/drivers/net/smc91x.h
--- linux-2.6.13-rc4/drivers/net/smc91x.h	2005-08-01 22:29:04.293312613 -0700
+++ linux-2.6.13-rc5/drivers/net/smc91x.h	2005-08-01 22:29:11.526630527 -0700
@@ -188,7 +188,7 @@
 #define	SMC_IRQ_TRIGGER_TYPE (( \
 		   machine_is_omap_h2() \
 		|| machine_is_omap_h3() \
-		|| (machine_is_omap_innovator() && !cpu_is_omap150()) \
+		|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
 	) ? IRQT_FALLING : IRQT_RISING)
 
 
diff -urN linux-2.6.13-rc4/drivers/pci/probe.c linux-2.6.13-rc5/drivers/pci/probe.c
--- linux-2.6.13-rc4/drivers/pci/probe.c	2005-08-01 22:29:04.404317492 -0700
+++ linux-2.6.13-rc5/drivers/pci/probe.c	2005-08-01 22:29:11.638635450 -0700
@@ -507,7 +507,7 @@
 		pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
 
 		if (!is_cardbus) {
-			child->bridge_ctl = PCI_BRIDGE_CTL_NO_ISA;
+			child->bridge_ctl = bctl | PCI_BRIDGE_CTL_NO_ISA;
 			/*
 			 * Adjust subordinate busnr in parent buses.
 			 * We do this before scanning for children because
diff -urN linux-2.6.13-rc4/drivers/pci/quirks.c linux-2.6.13-rc5/drivers/pci/quirks.c
--- linux-2.6.13-rc4/drivers/pci/quirks.c	2005-08-01 22:29:04.405317536 -0700
+++ linux-2.6.13-rc5/drivers/pci/quirks.c	2005-08-01 22:29:11.639635494 -0700
@@ -820,6 +820,11 @@
 			case 0x0001: /* Toshiba Satellite A40 */
 				asus_hides_smbus = 1;
 			}
+		if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+			switch(dev->subsystem_device) {
+			case 0x0001: /* Toshiba Tecra M2 */
+				asus_hides_smbus = 1;
+			}
        } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
                if (dev->device ==  PCI_DEVICE_ID_INTEL_82855PM_HB)
                        switch(dev->subsystem_device) {
diff -urN linux-2.6.13-rc4/drivers/pci/rom.c linux-2.6.13-rc5/drivers/pci/rom.c
--- linux-2.6.13-rc4/drivers/pci/rom.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/pci/rom.c	2005-08-01 22:29:11.640635538 -0700
@@ -125,7 +125,9 @@
 		image += readw(pds + 16) * 512;
 	} while (!last_image);
 
-	*size = image - rom;
+	/* never return a size larger than the PCI resource window */
+	/* there are known ROMs that get the size wrong */
+	*size = min((size_t)(image - rom), *size);
 
 	return rom;
 }
diff -urN linux-2.6.13-rc4/drivers/pci/setup-bus.c linux-2.6.13-rc5/drivers/pci/setup-bus.c
--- linux-2.6.13-rc4/drivers/pci/setup-bus.c	2005-08-01 22:29:04.406317580 -0700
+++ linux-2.6.13-rc5/drivers/pci/setup-bus.c	2005-08-01 22:29:11.641635582 -0700
@@ -51,8 +51,6 @@
 	struct resource_list head, *list, *tmp;
 	int idx;
 
-	bus->bridge_ctl &= ~PCI_BRIDGE_CTL_VGA;
-
 	head.next = NULL;
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		u16 class = dev->class >> 8;
@@ -62,10 +60,6 @@
 		    class == PCI_CLASS_BRIDGE_HOST)
 			continue;
 
-		if (class == PCI_CLASS_DISPLAY_VGA ||
-		    class == PCI_CLASS_NOT_DEFINED_VGA)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_VGA;
-
 		pdev_sort_resources(dev, &head);
 	}
 
@@ -509,12 +503,6 @@
 
 	pbus_assign_resources_sorted(bus);
 
-	if (bus->bridge_ctl & PCI_BRIDGE_CTL_VGA) {
-		/* Propagate presence of the VGA to upstream bridges */
-		for (b = bus; b->parent; b = b->parent) {
-			b->bridge_ctl |= PCI_BRIDGE_CTL_VGA;
-		}
-	}
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		b = dev->subordinate;
 		if (!b)
diff -urN linux-2.6.13-rc4/drivers/pcmcia/ds.c linux-2.6.13-rc5/drivers/pcmcia/ds.c
--- linux-2.6.13-rc4/drivers/pcmcia/ds.c	2005-08-01 22:29:04.415317976 -0700
+++ linux-2.6.13-rc5/drivers/pcmcia/ds.c	2005-08-01 22:29:11.649635933 -0700
@@ -589,8 +589,8 @@
 static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
 {
 	if (!s->pcmcia_state.device_add_pending) {
-		schedule_work(&s->device_add);
 		s->pcmcia_state.device_add_pending = 1;
+		schedule_work(&s->device_add);
 	}
 	return;
 }
diff -urN linux-2.6.13-rc4/drivers/pcmcia/yenta_socket.c linux-2.6.13-rc5/drivers/pcmcia/yenta_socket.c
--- linux-2.6.13-rc4/drivers/pcmcia/yenta_socket.c	2005-08-01 22:29:04.426318459 -0700
+++ linux-2.6.13-rc5/drivers/pcmcia/yenta_socket.c	2005-08-01 22:29:11.660636417 -0700
@@ -1107,8 +1107,6 @@
 		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
 		pci_disable_device(dev);
 
-		free_irq(dev->irq, socket);
-
 		/*
 		 * Some laptops (IBM T22) do not like us putting the Cardbus
 		 * bridge into D3.  At a guess, some other laptop will
@@ -1134,13 +1132,6 @@
 		pci_enable_device(dev);
 		pci_set_master(dev);
 
-		if (socket->cb_irq)
-			if (request_irq(socket->cb_irq, yenta_interrupt,
-			                SA_SHIRQ, "yenta", socket)) {
-				printk(KERN_WARNING "Yenta: request_irq() failed on resume!\n");
-				socket->cb_irq = 0;
-			}
-
 		if (socket->type && socket->type->restore_state)
 			socket->type->restore_state(socket);
 	}
diff -urN linux-2.6.13-rc4/drivers/s390/cio/device_fsm.c linux-2.6.13-rc5/drivers/s390/cio/device_fsm.c
--- linux-2.6.13-rc4/drivers/s390/cio/device_fsm.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/s390/cio/device_fsm.c	2005-08-01 22:29:11.678637208 -0700
@@ -235,6 +235,9 @@
 		sch->schib.pmcw.pam &
 		sch->schib.pmcw.pom &
 		sch->opm;
+	/* Check since device may again have become not operational. */
+	if (!sch->schib.pmcw.dnv)
+		state = DEV_STATE_NOT_OPER;
 	if (cdev->private->state == DEV_STATE_DISCONNECTED_SENSE_ID)
 		/* Force reprobe on all chpids. */
 		old_lpm = 0;
diff -urN linux-2.6.13-rc4/drivers/scsi/Kconfig linux-2.6.13-rc5/drivers/scsi/Kconfig
--- linux-2.6.13-rc4/drivers/scsi/Kconfig	2005-08-01 22:29:04.509322107 -0700
+++ linux-2.6.13-rc5/drivers/scsi/Kconfig	2005-08-01 22:29:11.744640109 -0700
@@ -424,7 +424,7 @@
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
-	bool "Serial ATA (SATA) support"
+	tristate "Serial ATA (SATA) support"
 	depends on SCSI
 	help
 	  This driver family supports Serial ATA host controllers
diff -urN linux-2.6.13-rc4/drivers/scsi/aacraid/aacraid.h linux-2.6.13-rc5/drivers/scsi/aacraid/aacraid.h
--- linux-2.6.13-rc4/drivers/scsi/aacraid/aacraid.h	2005-08-01 22:29:04.518322503 -0700
+++ linux-2.6.13-rc5/drivers/scsi/aacraid/aacraid.h	2005-08-01 22:29:11.754640548 -0700
@@ -15,11 +15,7 @@
 #define AAC_MAX_LUN		(8)
 
 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
-/*
- *  max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512
- * Linux has starvation problems if we permit larger than 4MB I/O ...
- */
-#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)8192)
+#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)512)
 
 /*
  * These macros convert from physical channels to virtual channels
diff -urN linux-2.6.13-rc4/drivers/scsi/aacraid/linit.c linux-2.6.13-rc5/drivers/scsi/aacraid/linit.c
--- linux-2.6.13-rc4/drivers/scsi/aacraid/linit.c	2005-08-01 22:29:04.522322679 -0700
+++ linux-2.6.13-rc5/drivers/scsi/aacraid/linit.c	2005-08-01 22:29:11.758640724 -0700
@@ -374,7 +374,8 @@
 	else
 		scsi_adjust_queue_depth(sdev, 0, 1);
 
-	if (host->max_sectors < AAC_MAX_32BIT_SGBCOUNT)
+	if (!(((struct aac_dev *)host->hostdata)->adapter_info.options
+	  & AAC_OPT_NEW_COMM))
 		blk_queue_max_segment_size(sdev->request_queue, 65536);
 
 	return 0;
diff -urN linux-2.6.13-rc4/drivers/scsi/ata_piix.c linux-2.6.13-rc5/drivers/scsi/ata_piix.c
--- linux-2.6.13-rc4/drivers/scsi/ata_piix.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/scsi/ata_piix.c	2005-08-01 22:29:11.807642878 -0700
@@ -38,6 +38,7 @@
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
 	ICH5_PMR		= 0x90, /* port mapping register */
 	ICH5_PCS		= 0x92,	/* port control and status */
+	PIIX_SCC		= 0x0A, /* sub-class code register */
 
 	PIIX_FLAG_AHCI		= (1 << 28), /* AHCI possible */
 	PIIX_FLAG_CHECKINTR	= (1 << 29), /* make sure PCI INTx enabled */
@@ -62,6 +63,8 @@
 	ich6_sata_rm		= 4,
 	ich7_sata		= 5,
 	esb2_sata		= 6,
+
+	PIIX_AHCI_DEVICE	= 6,
 };
 
 static int piix_init_one (struct pci_dev *pdev,
@@ -574,11 +577,11 @@
 	addr = pci_resource_start(pdev, AHCI_PCI_BAR);
 	if (!addr || !pci_resource_len(pdev, AHCI_PCI_BAR))
 		return 0;
-	
+
 	mmio = ioremap(addr, 64);
 	if (!mmio)
 		return -ENOMEM;
-	
+
 	tmp = readl(mmio + AHCI_GLOBAL_CTL);
 	if (tmp & AHCI_ENABLE) {
 		tmp &= ~AHCI_ENABLE;
@@ -588,7 +591,7 @@
 		if (tmp & AHCI_ENABLE)
 			rc = -EIO;
 	}
-	
+
 	iounmap(mmio);
 	return rc;
 }
@@ -626,9 +629,13 @@
 	port_info[1] = NULL;
 
 	if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
-		int rc = piix_disable_ahci(pdev);
-		if (rc)
-			return rc;
+               u8 tmp;
+               pci_read_config_byte(pdev, PIIX_SCC, &tmp);
+               if (tmp == PIIX_AHCI_DEVICE) {
+                       int rc = piix_disable_ahci(pdev);
+                       if (rc)
+                           return rc;
+               }
 	}
 
 	if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
diff -urN linux-2.6.13-rc4/drivers/serial/8250_pnp.c linux-2.6.13-rc5/drivers/serial/8250_pnp.c
--- linux-2.6.13-rc4/drivers/serial/8250_pnp.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/serial/8250_pnp.c	2005-08-01 22:29:12.223661162 -0700
@@ -394,7 +394,7 @@
 }
 
 static int __devinit
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_port port;
 	int ret, line, flags = dev_id->driver_data;
@@ -406,15 +406,23 @@
 	}
 
 	memset(&port, 0, sizeof(struct uart_port));
-	port.irq = pnp_irq(dev,0);
-	port.iobase = pnp_port_start(dev, 0);
+	port.irq = pnp_irq(dev, 0);
+	if (pnp_port_valid(dev, 0)) {
+		port.iobase = pnp_port_start(dev, 0);
+		port.iotype = UPIO_PORT;
+	} else if (pnp_mem_valid(dev, 0)) {
+		port.mapbase = pnp_mem_start(dev, 0);
+		port.iotype = UPIO_MEM;
+		port.flags = UPF_IOREMAP;
+	} else
+		return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
-	printk("Setup PNP port: port %x, irq %d, type %d\n",
-	       port.iobase, port.irq, port.iotype);
+	printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+	       port.iobase, port.mapbase, port.irq, port.iotype);
 #endif
 
-	port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+	port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
 	port.uartclk = 1843200;
 	port.dev = &dev->dev;
 
@@ -426,7 +434,7 @@
 
 }
 
-static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
 {
 	long line = (long)pnp_get_drvdata(dev);
 	if (line)
diff -urN linux-2.6.13-rc4/drivers/usb/Kconfig linux-2.6.13-rc5/drivers/usb/Kconfig
--- linux-2.6.13-rc4/drivers/usb/Kconfig	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/usb/Kconfig	2005-08-01 22:29:12.255662569 -0700
@@ -20,6 +20,7 @@
 	default y if SA1111
 	default y if ARCH_OMAP
 	default y if ARCH_LH7A404
+	default y if ARCH_S3C2410
 	default y if PXA27x
 	# PPC:
 	default y if STB03xxx
diff -urN linux-2.6.13-rc4/drivers/usb/class/cdc-acm.c linux-2.6.13-rc5/drivers/usb/class/cdc-acm.c
--- linux-2.6.13-rc4/drivers/usb/class/cdc-acm.c	2005-08-01 22:29:05.027344875 -0700
+++ linux-2.6.13-rc5/drivers/usb/class/cdc-acm.c	2005-08-01 22:29:12.268663140 -0700
@@ -980,6 +980,9 @@
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
diff -urN linux-2.6.13-rc4/drivers/usb/core/devio.c linux-2.6.13-rc5/drivers/usb/core/devio.c
--- linux-2.6.13-rc4/drivers/usb/core/devio.c	2005-08-01 22:29:05.029344963 -0700
+++ linux-2.6.13-rc5/drivers/usb/core/devio.c	2005-08-01 22:29:12.270663228 -0700
@@ -569,8 +569,11 @@
 			free_page((unsigned long)tbuf);
 			return -EINVAL;
 		}
-		snoop(&dev->dev, "control read: bRequest=%02x bRrequestType=%02x wValue=%04x wIndex=%04x\n", 
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex);
+		snoop(&dev->dev, "control read: bRequest=%02x "
+				"bRrequestType=%02x wValue=%04x "
+				"wIndex=%04x wLength=%04x\n",
+			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
+				ctrl.wIndex, ctrl.wLength);
 
 		usb_unlock_device(dev);
 		i = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ctrl.bRequest, ctrl.bRequestType,
@@ -579,11 +582,11 @@
 		if ((i > 0) && ctrl.wLength) {
 			if (usbfs_snoop) {
 				dev_info(&dev->dev, "control read: data ");
-				for (j = 0; j < ctrl.wLength; ++j)
+				for (j = 0; j < i; ++j)
 					printk ("%02x ", (unsigned char)(tbuf)[j]);
 				printk("\n");
 			}
-			if (copy_to_user(ctrl.data, tbuf, ctrl.wLength)) {
+			if (copy_to_user(ctrl.data, tbuf, i)) {
 				free_page((unsigned long)tbuf);
 				return -EFAULT;
 			}
@@ -595,8 +598,11 @@
 				return -EFAULT;
 			}
 		}
-		snoop(&dev->dev, "control write: bRequest=%02x bRrequestType=%02x wValue=%04x wIndex=%04x\n", 
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex);
+		snoop(&dev->dev, "control write: bRequest=%02x "
+				"bRrequestType=%02x wValue=%04x "
+				"wIndex=%04x wLength=%04x\n",
+			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
+				ctrl.wIndex, ctrl.wLength);
 		if (usbfs_snoop) {
 			dev_info(&dev->dev, "control write: data: ");
 			for (j = 0; j < ctrl.wLength; ++j)
diff -urN linux-2.6.13-rc4/drivers/usb/core/hcd.c linux-2.6.13-rc5/drivers/usb/core/hcd.c
--- linux-2.6.13-rc4/drivers/usb/core/hcd.c	2005-08-01 22:29:05.031345051 -0700
+++ linux-2.6.13-rc5/drivers/usb/core/hcd.c	2005-08-01 22:29:12.273663360 -0700
@@ -939,9 +939,9 @@
 	case USB_SPEED_HIGH:	/* ISOC or INTR */
 		// FIXME adjust for input vs output
 		if (isoc)
-			tmp = HS_USECS (bytecount);
+			tmp = HS_NSECS_ISO (bytecount);
 		else
-			tmp = HS_USECS_ISO (bytecount);
+			tmp = HS_NSECS (bytecount);
 		return tmp;
 	default:
 		pr_debug ("%s: bogus device speed!\n", usbcore_name);
diff -urN linux-2.6.13-rc4/drivers/usb/core/hcd.h linux-2.6.13-rc5/drivers/usb/core/hcd.h
--- linux-2.6.13-rc4/drivers/usb/core/hcd.h	2005-08-01 22:29:05.032345095 -0700
+++ linux-2.6.13-rc5/drivers/usb/core/hcd.h	2005-08-01 22:29:12.273663360 -0700
@@ -334,17 +334,19 @@
 extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
 
 /*
- * Ceiling microseconds (typical) for that many bytes at high speed
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
  * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
  * to preallocate bandwidth)
  */
 #define USB2_HOST_DELAY	5	/* nsec, guess */
-#define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
+#define HS_NSECS(bytes) ( ((55 * 8 * 2083)/1000) \
 	+ ((2083UL * (3167 + BitTime (bytes)))/1000) \
 	+ USB2_HOST_DELAY)
-#define HS_USECS_ISO(bytes) NS_TO_US ( ((38 * 8 * 2083)/1000) \
+#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083)/1000) \
 	+ ((2083UL * (3167 + BitTime (bytes)))/1000) \
 	+ USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
 
 extern long usb_calc_bus_time (int speed, int is_input,
 			int isoc, int bytecount);
diff -urN linux-2.6.13-rc4/drivers/usb/core/message.c linux-2.6.13-rc5/drivers/usb/core/message.c
--- linux-2.6.13-rc4/drivers/usb/core/message.c	2005-08-01 22:29:05.035345227 -0700
+++ linux-2.6.13-rc5/drivers/usb/core/message.c	2005-08-01 22:29:12.277663536 -0700
@@ -985,8 +985,10 @@
 		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
 			struct usb_interface	*interface;
 
-			/* remove this interface */
+			/* remove this interface if it has been registered */
 			interface = dev->actconfig->interface[i];
+			if (!klist_node_attached(&interface->dev.knode_bus))
+				continue;
 			dev_dbg (&dev->dev, "unregistering interface %s\n",
 				interface->dev.bus_id);
 			usb_remove_sysfs_intf_files(interface);
@@ -1439,7 +1441,7 @@
 		}
 	}
 
-	return ret;
+	return 0;
 }
 
 // synchronous request completion model
diff -urN linux-2.6.13-rc4/drivers/usb/host/ehci-q.c linux-2.6.13-rc5/drivers/usb/host/ehci-q.c
--- linux-2.6.13-rc4/drivers/usb/host/ehci-q.c	2005-08-01 22:29:05.065346545 -0700
+++ linux-2.6.13-rc5/drivers/usb/host/ehci-q.c	2005-08-01 22:29:12.306664810 -0700
@@ -657,8 +657,8 @@
 	 * For control/bulk requests, the HC or TT handles these.
 	 */
 	if (type == PIPE_INTERRUPT) {
-		qh->usecs = usb_calc_bus_time (USB_SPEED_HIGH, is_input, 0,
-				hb_mult (maxp) * max_packet (maxp));
+		qh->usecs = NS_TO_US (usb_calc_bus_time (USB_SPEED_HIGH, is_input, 0,
+				hb_mult (maxp) * max_packet (maxp)));
 		qh->start = NO_FRAME;
 
 		if (urb->dev->speed == USB_SPEED_HIGH) {
diff -urN linux-2.6.13-rc4/drivers/usb/host/ohci-hcd.c linux-2.6.13-rc5/drivers/usb/host/ohci-hcd.c
--- linux-2.6.13-rc4/drivers/usb/host/ohci-hcd.c	2005-08-01 22:29:05.074346941 -0700
+++ linux-2.6.13-rc5/drivers/usb/host/ohci-hcd.c	2005-08-01 22:29:12.316665250 -0700
@@ -887,6 +887,10 @@
 #include "ohci-sa1111.c"
 #endif
 
+#ifdef CONFIG_ARCH_S3C2410
+#include "ohci-s3c2410.c"
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #include "ohci-omap.c"
 #endif
@@ -909,6 +913,7 @@
 
 #if !(defined(CONFIG_PCI) \
       || defined(CONFIG_SA1111) \
+      || defined(CONFIG_ARCH_S3C2410) \
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
diff -urN linux-2.6.13-rc4/drivers/usb/host/ohci-s3c2410.c linux-2.6.13-rc5/drivers/usb/host/ohci-s3c2410.c
--- linux-2.6.13-rc4/drivers/usb/host/ohci-s3c2410.c	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/drivers/usb/host/ohci-s3c2410.c	2005-08-01 22:29:12.318665338 -0700
@@ -0,0 +1,496 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * USB Bus Glue for Samsung S3C2410
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Rusell King et al.
+ *
+ * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
+ *	by Ben Dooks, <ben@simtec.co.uk>
+ *	Copyright (C) 2004 Simtec Electronics
+ *
+ * Thanks to basprog@mail.ru for updates to newer kernels
+ *
+ * This file is licenced under the GPL.
+*/
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+#include <asm/arch/usb-control.h>
+
+#define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+/* clock device associated with the hcd */
+
+static struct clk *clk;
+
+/* forward definitions */
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
+
+/* conversion functions */
+
+struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+{
+	return hcd->self.controller->platform_data;
+}
+
+static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
+{
+	struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+	clk_enable(clk);
+
+	if (info != NULL) {
+		info->hcd	= hcd;
+		info->report_oc = s3c2410_hcd_oc;
+
+		if (info->enable_oc != NULL) {
+			(info->enable_oc)(info, 1);
+		}
+	}
+}
+
+static void s3c2410_stop_hc(struct platform_device *dev)
+{
+	struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+	dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
+
+	if (info != NULL) {
+		info->report_oc = NULL;
+		info->hcd	= NULL;
+
+		if (info->enable_oc != NULL) {
+			(info->enable_oc)(info, 0);
+		}
+	}
+
+	clk_disable(clk);
+}
+
+/* ohci_s3c2410_hub_status_data
+ *
+ * update the status data from the hub with anything that
+ * has been detected by our system
+*/
+
+static int
+ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct s3c2410_hcd_port *port;
+	int orig;
+	int portno;
+
+	orig  = ohci_hub_status_data (hcd, buf);
+
+	if (info == NULL)
+		return orig;
+
+	port = &info->port[0];
+
+	/* mark any changed port as changed */
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port->oc_changed == 1 &&
+		    port->flags & S3C_HCDFLG_USED) {
+			dev_dbg(hcd->self.controller,
+				"oc change on port %d\n", portno);
+
+			if (orig < 1)
+				orig = 1;
+
+			buf[0] |= 1<<(portno+1);
+		}
+	}
+
+	return orig;
+}
+
+/* s3c2410_usb_set_power
+ *
+ * configure the power on a port, by calling the platform device
+ * routine registered with the platform device
+*/
+
+static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
+				  int port, int to)
+{
+	if (info == NULL)
+		return;
+
+	if (info->power_control != NULL) {
+		info->port[port-1].power = to;
+		(info->power_control)(port, to);
+	}
+}
+
+/* ohci_s3c2410_hub_control
+ *
+ * look at control requests to the hub, and see if we need
+ * to take any action or over-ride the results from the
+ * request.
+*/
+
+static int ohci_s3c2410_hub_control (
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	/* if we are only an humble host without any special capabilites
+	 * process the request straight away and exit */
+
+	if (info == NULL) {
+		ret = ohci_hub_control(hcd, typeReq, wValue,
+				       wIndex, buf, wLength);
+		goto out;
+	}
+
+	/* check the request to see if it needs handling */
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			s3c2410_usb_set_power(info, wIndex, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				info->port[wIndex-1].oc_changed = 0;
+				info->port[wIndex-1].oc_status = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				info->port[wIndex-1].oc_status = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (valid_port(wIndex)) {
+				s3c2410_usb_set_power(info, wIndex, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		if (info->power_control == NULL)
+			return ret;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+		if (info->enable_oc) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (valid_port(wIndex)) {
+			if (info->port[wIndex-1].oc_changed) {
+				*data |= cpu_to_le32(RH_PS_OCIC);
+			}
+
+			if (info->port[wIndex-1].oc_status) {
+				*data |= cpu_to_le32(RH_PS_POCI);
+			}
+		}
+	}
+
+ out:
+	return ret;
+}
+
+/* s3c2410_hcd_oc
+ *
+ * handle an over-current report
+*/
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+{
+	struct s3c2410_hcd_port *port;
+	struct usb_hcd *hcd;
+	unsigned long flags;
+	int portno;
+
+	if (info == NULL)
+		return;
+
+	port = &info->port[0];
+	hcd = info->hcd;
+
+	local_irq_save(flags);
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port_oc & (1<<portno) &&
+		    port->flags & S3C_HCDFLG_USED) {
+			port->oc_status = 1;
+			port->oc_changed = 1;
+
+			/* ok, once over-current is detected,
+			   the port needs to be powered down */
+			s3c2410_usb_set_power(info, portno+1, 0);
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_s3c2410_remove - shutdown processing for HCD
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+*/
+
+void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+	usb_remove_hcd(hcd);
+	s3c2410_stop_hc(dev);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+/**
+ * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+			   struct platform_device *dev)
+{
+	struct usb_hcd *hcd = NULL;
+	int retval;
+
+	s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
+	s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+
+	hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = dev->resource[0].start;
+	hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_err(&dev->dev, "request_mem_region failed");
+		retval = -EBUSY;
+		goto err0;
+	}
+
+	clk = clk_get(NULL, "usb-host");
+	if (IS_ERR(clk)) {
+		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		retval = -ENOENT;
+		goto err1;
+	}
+
+	clk_use(clk);
+	s3c2410_start_hc(dev, hcd);
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&dev->dev, "ioremap failed\n");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+	if (retval != 0)
+		goto err2;
+
+	return 0;
+
+ err2:
+	s3c2410_stop_hc(dev);
+	iounmap(hcd->regs);
+	clk_unuse(clk);
+	clk_put(clk);
+
+ err1:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ err0:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+ohci_s3c2410_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run (ohci)) < 0) {
+		err ("can't start %s", hcd->self.bus_name);
+		ohci_stop (hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+
+static const struct hc_driver ohci_s3c2410_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"S3C24XX OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_s3c2410_start,
+	.stop =			ohci_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_s3c2410_hub_status_data,
+	.hub_control =		ohci_s3c2410_hub_control,
+
+#if defined(CONFIG_USB_SUSPEND) && 0
+	.hub_suspend =		ohci_hub_suspend,
+	.hub_resume =		ohci_hub_resume,
+#endif
+};
+
+/* device driver */
+
+static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
+}
+
+static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_hcd_s3c2410_remove(hcd, pdev);
+	return 0;
+}
+
+static struct device_driver ohci_hcd_s3c2410_driver = {
+	.name		= "s3c2410-ohci",
+	.bus		= &platform_bus_type,
+	.probe		= ohci_hcd_s3c2410_drv_probe,
+	.remove		= ohci_hcd_s3c2410_drv_remove,
+	/*.suspend	= ohci_hcd_s3c2410_drv_suspend, */
+	/*.resume	= ohci_hcd_s3c2410_drv_resume, */
+};
+
+static int __init ohci_hcd_s3c2410_init (void)
+{
+	return driver_register(&ohci_hcd_s3c2410_driver);
+}
+
+static void __exit ohci_hcd_s3c2410_cleanup (void)
+{
+	driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+
+module_init (ohci_hcd_s3c2410_init);
+module_exit (ohci_hcd_s3c2410_cleanup);
diff -urN linux-2.6.13-rc4/drivers/usb/input/acecad.c linux-2.6.13-rc5/drivers/usb/input/acecad.c
--- linux-2.6.13-rc4/drivers/usb/input/acecad.c	2005-08-01 22:29:05.084347380 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/acecad.c	2005-08-01 22:29:12.326665689 -0700
@@ -31,6 +31,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -87,8 +88,8 @@
 	if (prox) {
 		int x = data[1] | (data[2] << 8);
 		int y = data[3] | (data[4] << 8);
-		/*Pressure should compute the same way for flair and 302*/
-		int pressure = data[5] | ((int)data[6] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
 		int touch = data[0] & 0x01;
 		int stylus = (data[0] & 0x10) >> 4;
 		int stylus2 = (data[0] & 0x20) >> 5;
@@ -104,9 +105,9 @@
 	input_sync(dev);
 
 resubmit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
+		err("can't resubmit intr, %s-%s/input0, status %d",
 			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
 }
 
@@ -212,10 +213,7 @@
 
 	acecad->dev.name = acecad->name;
 	acecad->dev.phys = acecad->phys;
-	acecad->dev.id.bustype = BUS_USB;
-	acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &acecad->dev.id);
 	acecad->dev.dev = &intf->dev;
 
 	usb_fill_int_urb(acecad->irq, dev, pipe,
diff -urN linux-2.6.13-rc4/drivers/usb/input/aiptek.c linux-2.6.13-rc5/drivers/usb/input/aiptek.c
--- linux-2.6.13-rc4/drivers/usb/input/aiptek.c	2005-08-01 22:29:05.087347512 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/aiptek.c	2005-08-01 22:29:12.328665777 -0700
@@ -77,6 +77,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <linux/sched.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
@@ -2125,10 +2126,7 @@
 	aiptek->inputdev.absflat[ABS_WHEEL] = 0;
 	aiptek->inputdev.name = "Aiptek";
 	aiptek->inputdev.phys = aiptek->features.usbPath;
-	aiptek->inputdev.id.bustype = BUS_USB;
-	aiptek->inputdev.id.vendor = le16_to_cpu(usbdev->descriptor.idVendor);
-	aiptek->inputdev.id.product = le16_to_cpu(usbdev->descriptor.idProduct);
-	aiptek->inputdev.id.version = le16_to_cpu(usbdev->descriptor.bcdDevice);
+	usb_to_input_id(usbdev, &aiptek->inputdev.id);
 	aiptek->inputdev.dev = &intf->dev;
 
 	aiptek->usbdev = usbdev;
diff -urN linux-2.6.13-rc4/drivers/usb/input/ati_remote.c linux-2.6.13-rc5/drivers/usb/input/ati_remote.c
--- linux-2.6.13-rc4/drivers/usb/input/ati_remote.c	2005-08-01 22:29:05.089347600 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/ati_remote.c	2005-08-01 22:29:12.330665865 -0700
@@ -94,6 +94,7 @@
 #include <linux/moduleparam.h>
 #include <linux/input.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <linux/wait.h>
 
 /*
@@ -635,11 +636,8 @@
 	idev->name = ati_remote->name;
 	idev->phys = ati_remote->phys;
 
-	idev->id.bustype = BUS_USB;
-	idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor);
-	idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct);
-	idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice);
-	idev->dev = &(ati_remote->udev->dev);
+	usb_to_input_id(ati_remote->udev, &idev->id);
+	idev->dev = &ati_remote->udev->dev;
 }
 
 static int ati_remote_initialize(struct ati_remote *ati_remote)
diff -urN linux-2.6.13-rc4/drivers/usb/input/hid-core.c linux-2.6.13-rc5/drivers/usb/input/hid-core.c
--- linux-2.6.13-rc4/drivers/usb/input/hid-core.c	2005-08-01 22:29:05.090347644 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/hid-core.c	2005-08-01 22:29:12.332665953 -0700
@@ -789,12 +789,12 @@
 	return -1;
 }
 
-static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, struct pt_regs *regs)
+static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, int interrupt, struct pt_regs *regs)
 {
 	hid_dump_input(usage, value);
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_hid_event(hid, field, usage, value, regs);
-	if (hid->claimed & HID_CLAIMED_HIDDEV)
+	if (hid->claimed & HID_CLAIMED_HIDDEV && interrupt)
 		hiddev_hid_event(hid, field, usage, value, regs);
 }
 
@@ -804,7 +804,7 @@
  * reporting to the layer).
  */
 
-static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, struct pt_regs *regs)
+static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt, struct pt_regs *regs)
 {
 	unsigned n;
 	unsigned count = field->report_count;
@@ -831,19 +831,19 @@
 	for (n = 0; n < count; n++) {
 
 		if (HID_MAIN_ITEM_VARIABLE & field->flags) {
-			hid_process_event(hid, field, &field->usage[n], value[n], regs);
+			hid_process_event(hid, field, &field->usage[n], value[n], interrupt, regs);
 			continue;
 		}
 
 		if (field->value[n] >= min && field->value[n] <= max
 			&& field->usage[field->value[n] - min].hid
 			&& search(value, field->value[n], count))
-				hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, regs);
+				hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, interrupt, regs);
 
 		if (value[n] >= min && value[n] <= max
 			&& field->usage[value[n] - min].hid
 			&& search(field->value, value[n], count))
-				hid_process_event(hid, field, &field->usage[value[n] - min], 1, regs);
+				hid_process_event(hid, field, &field->usage[value[n] - min], 1, interrupt, regs);
 	}
 
 	memcpy(field->value, value, count * sizeof(__s32));
@@ -851,7 +851,7 @@
 	kfree(value);
 }
 
-static int hid_input_report(int type, struct urb *urb, struct pt_regs *regs)
+static int hid_input_report(int type, struct urb *urb, int interrupt, struct pt_regs *regs)
 {
 	struct hid_device *hid = urb->context;
 	struct hid_report_enum *report_enum = hid->report_enum + type;
@@ -899,7 +899,7 @@
 		hiddev_report_event(hid, report);
 
 	for (n = 0; n < report->maxfield; n++)
-		hid_input_field(hid, report->field[n], data, regs);
+		hid_input_field(hid, report->field[n], data, interrupt, regs);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_report_event(hid, report);
@@ -918,7 +918,7 @@
 
 	switch (urb->status) {
 		case 0:			/* success */
-			hid_input_report(HID_INPUT_REPORT, urb, regs);
+			hid_input_report(HID_INPUT_REPORT, urb, 1, regs);
 			break;
 		case -ECONNRESET:	/* unlink */
 		case -ENOENT:
@@ -1142,7 +1142,7 @@
 	switch (urb->status) {
 		case 0:			/* success */
 			if (hid->ctrl[hid->ctrltail].dir == USB_DIR_IN)
-				hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, regs);
+				hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0, regs);
 		case -ESHUTDOWN:	/* unplug */
 		case -EILSEQ:		/* unplug timectrl on uhci */
 			unplug = 1;
@@ -1372,6 +1372,9 @@
 #define USB_VENDOR_ID_A4TECH		0x09da
 #define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
 
+#define USB_VENDOR_ID_AASHIMA		0x06D6
+#define USB_DEVICE_ID_AASHIMA_GAMEPAD	0x0025
+
 #define USB_VENDOR_ID_CYPRESS		0x04b4
 #define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001
 #define USB_DEVICE_ID_CYPRESS_HIDCOM	0x5500
@@ -1548,6 +1551,7 @@
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
 	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK_5 },
 
+	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
diff -urN linux-2.6.13-rc4/drivers/usb/input/hid-input.c linux-2.6.13-rc5/drivers/usb/input/hid-input.c
--- linux-2.6.13-rc4/drivers/usb/input/hid-input.c	2005-08-01 22:29:05.091347688 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/hid-input.c	2005-08-01 22:29:12.333665997 -0700
@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #undef DEBUG
 
@@ -397,11 +398,12 @@
 
 void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, struct pt_regs *regs)
 {
-	struct input_dev *input = &field->hidinput->input;
+	struct input_dev *input;
 	int *quirks = &hid->quirks;
 
-	if (!input)
+	if (!field->hidinput)
 		return;
+	input = &field->hidinput->input;
 
 	input_regs(input, regs);
 
@@ -581,10 +583,7 @@
 				hidinput->input.name = hid->name;
 				hidinput->input.phys = hid->phys;
 				hidinput->input.uniq = hid->uniq;
-				hidinput->input.id.bustype = BUS_USB;
-				hidinput->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-				hidinput->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
-				hidinput->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+				usb_to_input_id(dev, &hidinput->input.id);
 				hidinput->input.dev = &hid->intf->dev;
 			}
 
diff -urN linux-2.6.13-rc4/drivers/usb/input/itmtouch.c linux-2.6.13-rc5/drivers/usb/input/itmtouch.c
--- linux-2.6.13-rc4/drivers/usb/input/itmtouch.c	2005-08-01 22:29:05.093347776 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/itmtouch.c	2005-08-01 22:29:12.335666085 -0700
@@ -53,6 +53,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /* only an 8 byte buffer necessary for a single packet */
 #define ITM_BUFSIZE			8
@@ -184,10 +185,7 @@
 
 	itmtouch->inputdev.name = itmtouch->name;
 	itmtouch->inputdev.phys = itmtouch->phys;
-	itmtouch->inputdev.id.bustype = BUS_USB;
-	itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
-	itmtouch->inputdev.id.product = udev->descriptor.idProduct;
-	itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+	usb_to_input_id(udev, &itmtouch->inputdev.id);
 	itmtouch->inputdev.dev = &intf->dev;
 
 	if (!strlen(itmtouch->name))
diff -urN linux-2.6.13-rc4/drivers/usb/input/kbtab.c linux-2.6.13-rc5/drivers/usb/input/kbtab.c
--- linux-2.6.13-rc4/drivers/usb/input/kbtab.c	2005-08-01 22:29:05.094347820 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/kbtab.c	2005-08-01 22:29:12.335666085 -0700
@@ -4,6 +4,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
@@ -167,10 +168,7 @@
 
 	kbtab->dev.name = "KB Gear Tablet";
 	kbtab->dev.phys = kbtab->phys;
-	kbtab->dev.id.bustype = BUS_USB;
-	kbtab->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	kbtab->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	kbtab->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &kbtab->dev.id);
 	kbtab->dev.dev = &intf->dev;
 	kbtab->usbdev = dev;
 
diff -urN linux-2.6.13-rc4/drivers/usb/input/mtouchusb.c linux-2.6.13-rc5/drivers/usb/input/mtouchusb.c
--- linux-2.6.13-rc4/drivers/usb/input/mtouchusb.c	2005-08-01 22:29:05.096347908 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/mtouchusb.c	2005-08-01 22:29:12.337666173 -0700
@@ -53,6 +53,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define MTOUCHUSB_MIN_XC                0x0
 #define MTOUCHUSB_MAX_RAW_XC            0x4000
@@ -232,10 +233,7 @@
 
 	mtouch->input.name = mtouch->name;
 	mtouch->input.phys = mtouch->phys;
-	mtouch->input.id.bustype = BUS_USB;
-	mtouch->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	mtouch->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	mtouch->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &mtouch->input.id);
 	mtouch->input.dev = &intf->dev;
 
 	mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
diff -urN linux-2.6.13-rc4/drivers/usb/input/powermate.c linux-2.6.13-rc5/drivers/usb/input/powermate.c
--- linux-2.6.13-rc4/drivers/usb/input/powermate.c	2005-08-01 22:29:05.096347908 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/powermate.c	2005-08-01 22:29:12.338666217 -0700
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define POWERMATE_VENDOR	0x077d	/* Griffin Technology, Inc. */
 #define POWERMATE_PRODUCT_NEW	0x0410	/* Griffin PowerMate */
@@ -389,10 +390,7 @@
 	pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
 	pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
 	pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
-	pm->input.id.bustype = BUS_USB;
-	pm->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	pm->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	pm->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &pm->input.id);
 	pm->input.event = powermate_input_event;
 	pm->input.dev = &intf->dev;
 	pm->input.phys = pm->phys;
diff -urN linux-2.6.13-rc4/drivers/usb/input/touchkitusb.c linux-2.6.13-rc5/drivers/usb/input/touchkitusb.c
--- linux-2.6.13-rc4/drivers/usb/input/touchkitusb.c	2005-08-01 22:29:05.097347952 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/touchkitusb.c	2005-08-01 22:29:12.338666217 -0700
@@ -35,7 +35,7 @@
 #define DEBUG
 #endif
 #include <linux/usb.h>
-
+#include <linux/usb_input.h>
 
 #define TOUCHKIT_MIN_XC			0x0
 #define TOUCHKIT_MAX_XC			0x07ff
@@ -202,10 +202,7 @@
 
 	touchkit->input.name = touchkit->name;
 	touchkit->input.phys = touchkit->phys;
-	touchkit->input.id.bustype = BUS_USB;
-	touchkit->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	touchkit->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	touchkit->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &touchkit->input.id);
 	touchkit->input.dev = &intf->dev;
 
 	touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
diff -urN linux-2.6.13-rc4/drivers/usb/input/usbkbd.c linux-2.6.13-rc5/drivers/usb/input/usbkbd.c
--- linux-2.6.13-rc4/drivers/usb/input/usbkbd.c	2005-08-01 22:29:05.097347952 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/usbkbd.c	2005-08-01 22:29:12.339666261 -0700
@@ -32,6 +32,7 @@
 #include <linux/input.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -288,10 +289,7 @@
 
 	kbd->dev.name = kbd->name;
 	kbd->dev.phys = kbd->phys;
-	kbd->dev.id.bustype = BUS_USB;
-	kbd->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	kbd->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	kbd->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &kbd->dev.id);
 	kbd->dev.dev = &iface->dev;
 
 	if (dev->manufacturer)
diff -urN linux-2.6.13-rc4/drivers/usb/input/usbmouse.c linux-2.6.13-rc5/drivers/usb/input/usbmouse.c
--- linux-2.6.13-rc4/drivers/usb/input/usbmouse.c	2005-08-01 22:29:05.098347996 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/usbmouse.c	2005-08-01 22:29:12.339666261 -0700
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -171,10 +172,7 @@
 
 	mouse->dev.name = mouse->name;
 	mouse->dev.phys = mouse->phys;
-	mouse->dev.id.bustype = BUS_USB;
-	mouse->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	mouse->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	mouse->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &mouse->dev.id);
 	mouse->dev.dev = &intf->dev;
 
 	if (dev->manufacturer)
diff -urN linux-2.6.13-rc4/drivers/usb/input/wacom.c linux-2.6.13-rc5/drivers/usb/input/wacom.c
--- linux-2.6.13-rc4/drivers/usb/input/wacom.c	2005-08-01 22:29:05.099348040 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/wacom.c	2005-08-01 22:29:12.341666349 -0700
@@ -69,6 +69,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
@@ -823,10 +824,7 @@
 
 	wacom->dev.name = wacom->features->name;
 	wacom->dev.phys = wacom->phys;
-	wacom->dev.id.bustype = BUS_USB;
-	wacom->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	wacom->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	wacom->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &wacom->dev.id);
 	wacom->dev.dev = &intf->dev;
 	wacom->usbdev = dev;
 
diff -urN linux-2.6.13-rc4/drivers/usb/input/xpad.c linux-2.6.13-rc5/drivers/usb/input/xpad.c
--- linux-2.6.13-rc4/drivers/usb/input/xpad.c	2005-08-01 22:29:05.100348084 -0700
+++ linux-2.6.13-rc5/drivers/usb/input/xpad.c	2005-08-01 22:29:12.342666393 -0700
@@ -62,6 +62,7 @@
 #include <linux/module.h>
 #include <linux/smp_lock.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define DRIVER_VERSION "v0.0.5"
 #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
@@ -256,10 +257,7 @@
 
 	xpad->udev = udev;
 
-	xpad->dev.id.bustype = BUS_USB;
-	xpad->dev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	xpad->dev.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	xpad->dev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &xpad->dev.id);
 	xpad->dev.dev = &intf->dev;
 	xpad->dev.private = xpad;
 	xpad->dev.name = xpad_device[i].name;
diff -urN linux-2.6.13-rc4/drivers/usb/media/konicawc.c linux-2.6.13-rc5/drivers/usb/media/konicawc.c
--- linux-2.6.13-rc4/drivers/usb/media/konicawc.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/usb/media/konicawc.c	2005-08-01 22:29:12.342666393 -0700
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/usb_input.h>
 
 #include "usbvideo.h"
 
@@ -845,10 +846,7 @@
 		cam->input.private = cam;
 		cam->input.evbit[0] = BIT(EV_KEY);
 		cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
-		cam->input.id.bustype = BUS_USB;
-		cam->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-		cam->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
-		cam->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+		usb_to_input_id(dev, &cam->input.id);
 		input_register_device(&cam->input);
 		
 		usb_make_path(dev, cam->input_physname, 56);
diff -urN linux-2.6.13-rc4/drivers/usb/misc/ldusb.c linux-2.6.13-rc5/drivers/usb/misc/ldusb.c
--- linux-2.6.13-rc4/drivers/usb/misc/ldusb.c	2005-08-01 22:29:05.108348435 -0700
+++ linux-2.6.13-rc5/drivers/usb/misc/ldusb.c	2005-08-01 22:29:12.350666744 -0700
@@ -23,6 +23,7 @@
  *
  * V0.1  (mh) Initial version
  * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
+ * V0.12 (mh) Added kmalloc check for string buffer
  */
 
 #include <linux/config.h>
@@ -84,7 +85,7 @@
 	{ }					/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, ld_usb_table);
-MODULE_VERSION("V0.11");
+MODULE_VERSION("V0.12");
 MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
 MODULE_DESCRIPTION("LD USB Driver");
 MODULE_LICENSE("GPL");
@@ -635,6 +636,10 @@
 	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) &&
 	    (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
 		buffer = kmalloc(256, GFP_KERNEL);
+		if (buffer == NULL) {
+			dev_err(&intf->dev, "Couldn't allocate string buffer\n");
+			goto error;
+		}
 		/* usb_string makes SETUP+STALL to leave always ControlReadLoop */
 		usb_string(udev, 255, buffer, 256);
 		kfree(buffer);
diff -urN linux-2.6.13-rc4/drivers/usb/net/pegasus.c linux-2.6.13-rc5/drivers/usb/net/pegasus.c
--- linux-2.6.13-rc4/drivers/usb/net/pegasus.c	2005-08-01 22:29:05.113348655 -0700
+++ linux-2.6.13-rc5/drivers/usb/net/pegasus.c	2005-08-01 22:29:12.355666964 -0700
@@ -59,7 +59,6 @@
 
 static int loopback = 0;
 static int mii_mode = 0;
-static int multicast_filter_limit = 32;
 
 static struct usb_eth_dev usb_dev_id[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags)	\
diff -urN linux-2.6.13-rc4/drivers/usb/net/rtl8150.c linux-2.6.13-rc5/drivers/usb/net/rtl8150.c
--- linux-2.6.13-rc4/drivers/usb/net/rtl8150.c	2005-08-01 22:29:05.113348655 -0700
+++ linux-2.6.13-rc5/drivers/usb/net/rtl8150.c	2005-08-01 22:29:12.355666964 -0700
@@ -167,8 +167,6 @@
 
 typedef struct rtl8150 rtl8150_t;
 
-static unsigned long multicast_filter_limit = 32;
-
 static void fill_skb_pool(rtl8150_t *);
 static void free_skb_pool(rtl8150_t *);
 static inline struct sk_buff *pull_skb(rtl8150_t *);
diff -urN linux-2.6.13-rc4/drivers/usb/net/zd1201.c linux-2.6.13-rc5/drivers/usb/net/zd1201.c
--- linux-2.6.13-rc4/drivers/usb/net/zd1201.c	2005-08-01 22:29:05.117348831 -0700
+++ linux-2.6.13-rc5/drivers/usb/net/zd1201.c	2005-08-01 22:29:12.359667140 -0700
@@ -29,6 +29,7 @@
 	{USB_DEVICE(0x0ace, 0x1201)}, /* ZyDAS ZD1201 Wireless USB Adapter */
 	{USB_DEVICE(0x050d, 0x6051)}, /* Belkin F5D6051 usb  adapter */
 	{USB_DEVICE(0x0db0, 0x6823)}, /* MSI UB11B usb  adapter */
+	{USB_DEVICE(0x1044, 0x8005)}, /* GIGABYTE GN-WLBZ201 usb adapter */
 	{}
 };
 
diff -urN linux-2.6.13-rc4/drivers/usb/serial/ftdi_sio.c linux-2.6.13-rc5/drivers/usb/serial/ftdi_sio.c
--- linux-2.6.13-rc4/drivers/usb/serial/ftdi_sio.c	2005-08-01 22:29:05.120348963 -0700
+++ linux-2.6.13-rc5/drivers/usb/serial/ftdi_sio.c	2005-08-01 22:29:12.362667272 -0700
@@ -429,6 +429,9 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ }						/* Terminating entry */
 };
 
@@ -545,6 +548,7 @@
 
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
+#define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */
 
 /* High and low are for DTR, RTS etc etc */
 #define HIGH 1
@@ -593,62 +597,59 @@
 	 return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
 }
 
-static int set_rts(struct usb_serial_port *port, int high_or_low)
+#define set_mctrl(port, set)		update_mctrl((port), (set), 0)
+#define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
+
+static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
-	unsigned ftdi_high_or_low;
+	unsigned urb_value;
 	int rv;
-	
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-	
-	if (high_or_low) {
-		ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH;
-		priv->last_dtr_rts |= TIOCM_RTS;
-	} else {
-		ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW;
-		priv->last_dtr_rts &= ~TIOCM_RTS;
-	}
-	rv = usb_control_msg(port->serial->dev,
-			       usb_sndctrlpipe(port->serial->dev, 0),
-			       FTDI_SIO_SET_MODEM_CTRL_REQUEST, 
-			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
-			       ftdi_high_or_low, priv->interface, 
-			       buf, 0, WDR_TIMEOUT);
-
-	kfree(buf);
-	return rv;
-}
 
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+		return 0;	/* no change */
+	}
 
-static int set_dtr(struct usb_serial_port *port, int high_or_low)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
-	unsigned ftdi_high_or_low;
-	int rv;
-	
 	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
+	if (!buf) {
 		return -ENOMEM;
-
-	if (high_or_low) {
-		ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH;
-		priv->last_dtr_rts |= TIOCM_DTR;
-	} else {
-		ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW;
-		priv->last_dtr_rts &= ~TIOCM_DTR;
 	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (clear & TIOCM_DTR)
+		urb_value |= FTDI_SIO_SET_DTR_LOW;
+	if (clear & TIOCM_RTS)
+		urb_value |= FTDI_SIO_SET_RTS_LOW;
+	if (set & TIOCM_DTR)
+		urb_value |= FTDI_SIO_SET_DTR_HIGH;
+	if (set & TIOCM_RTS)
+		urb_value |= FTDI_SIO_SET_RTS_HIGH;
 	rv = usb_control_msg(port->serial->dev,
 			       usb_sndctrlpipe(port->serial->dev, 0),
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST, 
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
-			       ftdi_high_or_low, priv->interface, 
+			       urb_value, priv->interface,
 			       buf, 0, WDR_TIMEOUT);
 
 	kfree(buf);
+	if (rv < 0) {
+		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+				__FUNCTION__,
+				(set & TIOCM_DTR) ? "HIGH" :
+				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
+				(set & TIOCM_RTS) ? "HIGH" :
+				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
+	} else {
+		dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+				(set & TIOCM_DTR) ? "HIGH" :
+				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
+				(set & TIOCM_RTS) ? "HIGH" :
+				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
+		priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
+	}
 	return rv;
 }
 
@@ -681,7 +682,7 @@
 			    FTDI_SIO_SET_BAUDRATE_REQUEST,
 			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
 			    urb_value, urb_index,
-			    buf, 0, 100);
+			    buf, 0, WDR_SHORT_TIMEOUT);
 
 	kfree(buf);
 	return rv;
@@ -1219,12 +1220,7 @@
 	/* FIXME: Flow control might be enabled, so it should be checked -
 	   we have no control of defaults! */
 	/* Turn on RTS and DTR since we are not flow controlling by default */
-	if (set_dtr(port, HIGH) < 0) {
-		err("%s Error from DTR HIGH urb", __FUNCTION__);
-	}
-	if (set_rts(port, HIGH) < 0){
-		err("%s Error from RTS HIGH urb", __FUNCTION__);
-	}
+	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 
 	/* Not throttled */
 	spin_lock_irqsave(&priv->rx_lock, flags);
@@ -1274,14 +1270,8 @@
 			err("error from flowcontrol urb");
 		}	    
 
-		/* drop DTR */
-		if (set_dtr(port, LOW) < 0){
-			err("Error from DTR LOW urb");
-		}
-		/* drop RTS */
-		if (set_rts(port, LOW) < 0) {
-			err("Error from RTS LOW urb");
-		}
+		/* drop RTS and DTR */
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} /* Note change no line if hupcl is off */
 
 	/* cancel any scheduled reading */
@@ -1797,7 +1787,7 @@
 			    FTDI_SIO_SET_DATA_REQUEST, 
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
-			    buf, 0, 100) < 0) {
+			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
 		err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
 	}	   
 
@@ -1812,25 +1802,14 @@
 			err("%s error from disable flowcontrol urb", __FUNCTION__);
 		}	    
 		/* Drop RTS and DTR */
-		if (set_dtr(port, LOW) < 0){
-			err("%s Error from DTR LOW urb", __FUNCTION__);
-		}
-		if (set_rts(port, LOW) < 0){
-			err("%s Error from RTS LOW urb", __FUNCTION__);
-		}	
-		
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(port)) {
 			err("%s urb failed to set baurdrate", __FUNCTION__);
 		}
 		/* Ensure  RTS and DTR are raised */
-		else if (set_dtr(port, HIGH) < 0){
-			err("%s Error from DTR HIGH urb", __FUNCTION__);
-		}
-		else if (set_rts(port, HIGH) < 0){
-			err("%s Error from RTS HIGH urb", __FUNCTION__);
-		}	
+		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 
 	/* Set flow control */
@@ -1942,35 +1921,8 @@
 
 static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
 {
-	int ret;
-	
 	dbg("%s TIOCMSET", __FUNCTION__);
-	if (set & TIOCM_DTR){
-		if ((ret = set_dtr(port, HIGH)) < 0) {
-			err("Urb to set DTR failed");
-			return(ret);
-		}
-	}
-	if (set & TIOCM_RTS) {
-		if ((ret = set_rts(port, HIGH)) < 0){
-			err("Urb to set RTS failed");
-			return(ret);
-		}
-	}
-	
-	if (clear & TIOCM_DTR){
-		if ((ret = set_dtr(port, LOW)) < 0){
-			err("Urb to unset DTR failed");
-			return(ret);
-		}
-	}	
-	if (clear & TIOCM_RTS) {
-		if ((ret = set_rts(port, LOW)) < 0){
-			err("Urb to unset RTS failed");
-			return(ret);
-		}
-	}
-	return(0);
+	return update_mctrl(port, set, clear);
 }
 
 
diff -urN linux-2.6.13-rc4/drivers/usb/serial/ftdi_sio.h linux-2.6.13-rc5/drivers/usb/serial/ftdi_sio.h
--- linux-2.6.13-rc4/drivers/usb/serial/ftdi_sio.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/usb/serial/ftdi_sio.h	2005-08-01 22:29:12.363667316 -0700
@@ -265,10 +265,24 @@
 #define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
 
 /*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ */
+#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
+
+/*
  * Active Robots product ids.
  */
 #define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
 
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff -urN linux-2.6.13-rc4/drivers/usb/usb-skeleton.c linux-2.6.13-rc5/drivers/usb/usb-skeleton.c
--- linux-2.6.13-rc4/drivers/usb/usb-skeleton.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/usb/usb-skeleton.c	2005-08-01 22:29:12.372667711 -0700
@@ -257,7 +257,8 @@
 		endpoint = &iface_desc->endpoint[i].desc;
 
 		if (!dev->bulk_in_endpointAddr &&
-		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+					== USB_DIR_IN) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 					== USB_ENDPOINT_XFER_BULK)) {
 			/* we found a bulk in endpoint */
@@ -272,7 +273,8 @@
 		}
 
 		if (!dev->bulk_out_endpointAddr &&
-		    !(endpoint->bEndpointAddress & USB_DIR_OUT) &&
+		    ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+					== USB_DIR_OUT) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 					== USB_ENDPOINT_XFER_BULK)) {
 			/* we found a bulk out endpoint */
diff -urN linux-2.6.13-rc4/drivers/video/fbmem.c linux-2.6.13-rc5/drivers/video/fbmem.c
--- linux-2.6.13-rc4/drivers/video/fbmem.c	2005-08-01 22:29:05.161350765 -0700
+++ linux-2.6.13-rc5/drivers/video/fbmem.c	2005-08-01 22:29:12.402669030 -0700
@@ -80,10 +80,12 @@
  */
 void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height)
 {
-	int i;
+	int i, j;
 
 	for (i = height; i--; ) {
-		memcpy(dst, src, s_pitch);
+		/* s_pitch is a few bytes at the most, memcpy is suboptimal */
+		for (j = 0; j < s_pitch; j++)
+			dst[j] = src[j];
 		src += s_pitch;
 		dst += d_pitch;
 	}
diff -urN linux-2.6.13-rc4/drivers/video/fbsysfs.c linux-2.6.13-rc5/drivers/video/fbsysfs.c
--- linux-2.6.13-rc4/drivers/video/fbsysfs.c	2005-08-01 22:29:05.162350809 -0700
+++ linux-2.6.13-rc5/drivers/video/fbsysfs.c	2005-08-01 22:29:12.403669074 -0700
@@ -244,15 +244,15 @@
 
 /* Format for cmap is "%02x%c%4x%4x%4x\n" */
 /* %02x entry %c transp %4x red %4x blue %4x green \n */
-/* 255 rows at 16 chars equals 4096 */
-/* PAGE_SIZE can be 4096 or larger */
+/* 256 rows at 16 chars equals 4096, the normal page size */
+/* the code will automatically adjust for different page sizes */
 static ssize_t store_cmap(struct class_device *class_device, const char *buf,
 			  size_t count)
 {
 	struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device);
 	int rc, i, start, length, transp = 0;
 
-	if ((count > 4096) || ((count % 16) != 0) || (PAGE_SIZE < 4096))
+	if ((count > PAGE_SIZE) || ((count % 16) != 0))
 		return -EINVAL;
 
 	if (!fb_info->fbops->fb_setcolreg && !fb_info->fbops->fb_setcmap)
@@ -317,18 +317,18 @@
 	   !fb_info->cmap.green)
 		return -EINVAL;
 
-	if (PAGE_SIZE < 4096)
+	if (fb_info->cmap.len > PAGE_SIZE / 16)
 		return -EINVAL;
 
 	/* don't mess with the format, the buffer is PAGE_SIZE */
-	/* 255 entries at 16 chars per line equals 4096 = PAGE_SIZE */
+	/* 256 entries at 16 chars per line equals 4096 = PAGE_SIZE */
 	for (i = 0; i < fb_info->cmap.len; i++) {
-		sprintf(&buf[ i * 16], "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
+		snprintf(&buf[ i * 16], PAGE_SIZE - i * 16, "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
 			((fb_info->cmap.transp && fb_info->cmap.transp[i]) ? '*' : ' '),
 			fb_info->cmap.red[i], fb_info->cmap.blue[i],
 			fb_info->cmap.green[i]);
 	}
-	return 4096;
+	return 16 * fb_info->cmap.len;
 }
 
 static ssize_t store_blank(struct class_device *class_device, const char * buf,
@@ -414,6 +414,13 @@
 			fb_info->var.xoffset);
 }
 
+static ssize_t show_name(struct class_device *class_device, char *buf)
+{
+	struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", fb_info->fix.id);
+}
+
 static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp),
 	__ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank),
@@ -424,6 +431,7 @@
 	__ATTR(modes, S_IRUGO|S_IWUSR, show_modes, store_modes),
 	__ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan),
 	__ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual),
+	__ATTR(name, S_IRUGO, show_name, NULL),
 };
 
 int fb_init_class_device(struct fb_info *fb_info)
diff -urN linux-2.6.13-rc4/drivers/video/tridentfb.c linux-2.6.13-rc5/drivers/video/tridentfb.c
--- linux-2.6.13-rc4/drivers/video/tridentfb.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/drivers/video/tridentfb.c	2005-08-01 22:29:12.420669821 -0700
@@ -454,13 +454,16 @@
 static void tridentfb_fillrect(struct fb_info * info, const struct fb_fillrect *fr)
 {
 	int bpp = info->var.bits_per_pixel;
-	int col;
+	int col = 0;
 	
 	switch (bpp) {
 		default:
-		case 8: col = fr->color;
+		case 8: col |= fr->color;
+			col |= col << 8;
+			col |= col << 16;
 			break;
 		case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
+			
 			 break;
 		case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
 			 break;
@@ -882,8 +885,9 @@
 
 	write3X4(GraphEngReg, 0x80);	//enable GE for text acceleration
 
-//	if (info->var.accel_flags & FB_ACCELF_TEXT)
-//FIXME		acc->init_accel(info->var.xres,bpp);
+#ifdef CONFIG_FB_TRIDENT_ACCEL	
+	acc->init_accel(info->var.xres,bpp);
+#endif
 	
 	switch (bpp) {
 		case 8:  tmp = 0x00; break;
@@ -900,7 +904,7 @@
 	write3X4(DRAMControl, tmp);	//both IO,linear enable
 
 	write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
-	write3X4(Performance,0x20);
+	write3X4(Performance,0x92);
 	write3X4(PCIReg,0x07);		//MMIO & PCI read and write burst enable
 
 	/* convert from picoseconds to MHz */
@@ -981,12 +985,14 @@
 		t_outb(green>>10,0x3C9);
 		t_outb(blue>>10,0x3C9);
 
-	} else
-	if (bpp == 16) 			/* RGB 565 */
-			((u32*)info->pseudo_palette)[regno] = (red & 0xF800) |
-			((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-	else
-	if (bpp == 32)		/* ARGB 8888 */
+	} else if (bpp == 16) {	/* RGB 565 */
+		u32 col;
+
+		col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
+			((blue & 0xF800) >> 11);
+		col |= col << 16;	
+		((u32 *)(info->pseudo_palette))[regno] = col;
+	} else if (bpp == 32)		/* ARGB 8888 */
 		((u32*)info->pseudo_palette)[regno] =
 			((transp & 0xFF00) <<16) 	|
 			((red & 0xFF00) << 8) 		|
diff -urN linux-2.6.13-rc4/drivers/video/vesafb.c linux-2.6.13-rc5/drivers/video/vesafb.c
--- linux-2.6.13-rc4/drivers/video/vesafb.c	2005-08-01 22:29:05.180351600 -0700
+++ linux-2.6.13-rc5/drivers/video/vesafb.c	2005-08-01 22:29:12.420669821 -0700
@@ -45,7 +45,7 @@
 };
 
 static int             inverse   = 0;
-static int             mtrr      = 1;
+static int             mtrr      = 3; /* default to write-combining */
 static int	       vram_remap __initdata = 0; /* Set amount of memory to be used */
 static int	       vram_total __initdata = 0; /* Set total amount of memory */
 static int             pmi_setpal = 0;	/* pmi for palette changes ??? */
@@ -204,8 +204,8 @@
 			pmi_setpal=0;
 		else if (! strcmp(this_opt, "pmipal"))
 			pmi_setpal=1;
-		else if (! strcmp(this_opt, "mtrr"))
-			mtrr=1;
+		else if (! strncmp(this_opt, "mtrr:", 5))
+			mtrr = simple_strtoul(this_opt+5, NULL, 0);
 		else if (! strcmp(this_opt, "nomtrr"))
 			mtrr=0;
 		else if (! strncmp(this_opt, "vtotal:", 7))
@@ -387,14 +387,39 @@
 
 	if (mtrr) {
 		unsigned int temp_size = size_total;
-		/* Find the largest power-of-two */
-		while (temp_size & (temp_size - 1))
-			temp_size &= (temp_size - 1);
-
-		/* Try and find a power of two to add */
-		while (temp_size > PAGE_SIZE &&
-			mtrr_add(vesafb_fix.smem_start, temp_size, MTRR_TYPE_WRCOMB, 1)==-EINVAL) {
-			temp_size >>= 1;
+		unsigned int type = 0;
+
+		switch (mtrr) {
+		case 1:
+			type = MTRR_TYPE_UNCACHABLE;
+			break;
+		case 2:
+			type = MTRR_TYPE_WRBACK;
+			break;
+		case 3:
+			type = MTRR_TYPE_WRCOMB;
+			break;
+		case 4:
+			type = MTRR_TYPE_WRTHROUGH;
+			break;
+		default:
+			type = 0;
+			break;
+		}
+
+		if (type) {
+			int rc;
+
+			/* Find the largest power-of-two */
+			while (temp_size & (temp_size - 1))
+				temp_size &= (temp_size - 1);
+
+			/* Try and find a power of two to add */
+			do {
+				rc = mtrr_add(vesafb_fix.smem_start, temp_size,
+					      type, 1);
+				temp_size >>= 1;
+			} while (temp_size >= PAGE_SIZE && rc == -EINVAL);
 		}
 	}
 	
diff -urN linux-2.6.13-rc4/drivers/w1/Kconfig linux-2.6.13-rc5/drivers/w1/Kconfig
--- linux-2.6.13-rc4/drivers/w1/Kconfig	2005-08-01 22:29:05.181351644 -0700
+++ linux-2.6.13-rc5/drivers/w1/Kconfig	2005-08-01 22:29:12.422669909 -0700
@@ -30,7 +30,7 @@
 	  This support is also available as a module.  If so, the module
 	  will be called ds9490r.ko.
 
-config W1_DS9490R_BRIDGE
+config W1_DS9490_BRIDGE
 	tristate "DS9490R USB <-> W1 transport layer for 1-wire"
 	depends on W1_DS9490
 	help
diff -urN linux-2.6.13-rc4/fs/hfs/bnode.c linux-2.6.13-rc5/fs/hfs/bnode.c
--- linux-2.6.13-rc4/fs/hfs/bnode.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hfs/bnode.c	2005-08-01 22:29:12.461671623 -0700
@@ -480,6 +480,8 @@
 			return;
 		}
 		for (i = 0; i < tree->pages_per_bnode; i++) {
+			if (!node->page[i])
+				continue;
 			mark_page_accessed(node->page[i]);
 #if REF_PAGES
 			put_page(node->page[i]);
diff -urN linux-2.6.13-rc4/fs/hfs/extent.c linux-2.6.13-rc5/fs/hfs/extent.c
--- linux-2.6.13-rc4/fs/hfs/extent.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hfs/extent.c	2005-08-01 22:29:12.461671623 -0700
@@ -482,7 +482,8 @@
 		page_cache_release(page);
 		mark_inode_dirty(inode);
 		return;
-	}
+	} else if (inode->i_size == HFS_I(inode)->phys_size)
+		return;
 	size = inode->i_size + HFS_SB(sb)->alloc_blksz - 1;
 	blk_cnt = size / HFS_SB(sb)->alloc_blksz;
 	alloc_cnt = HFS_I(inode)->alloc_blocks;
diff -urN linux-2.6.13-rc4/fs/hfsplus/bnode.c linux-2.6.13-rc5/fs/hfsplus/bnode.c
--- linux-2.6.13-rc4/fs/hfsplus/bnode.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hfsplus/bnode.c	2005-08-01 22:29:12.462671667 -0700
@@ -643,6 +643,8 @@
 			return;
 		}
 		for (i = 0; i < tree->pages_per_bnode; i++) {
+			if (!node->page[i])
+				continue;
 			mark_page_accessed(node->page[i]);
 #if REF_PAGES
 			put_page(node->page[i]);
diff -urN linux-2.6.13-rc4/fs/hfsplus/extents.c linux-2.6.13-rc5/fs/hfsplus/extents.c
--- linux-2.6.13-rc4/fs/hfsplus/extents.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hfsplus/extents.c	2005-08-01 22:29:12.462671667 -0700
@@ -461,7 +461,9 @@
 		page_cache_release(page);
 		mark_inode_dirty(inode);
 		return;
-	}
+	} else if (inode->i_size == HFSPLUS_I(inode).phys_size)
+		return;
+
 	blk_cnt = (inode->i_size + HFSPLUS_SB(sb).alloc_blksz - 1) >> HFSPLUS_SB(sb).alloc_blksz_shift;
 	alloc_cnt = HFSPLUS_I(inode).alloc_blocks;
 	if (blk_cnt == alloc_cnt)
diff -urN linux-2.6.13-rc4/fs/hostfs/hostfs.h linux-2.6.13-rc5/fs/hostfs/hostfs.h
--- linux-2.6.13-rc4/fs/hostfs/hostfs.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hostfs/hostfs.h	2005-08-01 22:29:12.462671667 -0700
@@ -69,6 +69,7 @@
 extern int write_file(int fd, unsigned long long *offset, const char *buf,
 		      int len);
 extern int lseek_file(int fd, long long offset, int whence);
+extern int fsync_file(int fd, int datasync);
 extern int file_create(char *name, int ur, int uw, int ux, int gr,
 		       int gw, int gx, int or, int ow, int ox);
 extern int set_attr(const char *file, struct hostfs_iattr *attrs);
diff -urN linux-2.6.13-rc4/fs/hostfs/hostfs_kern.c linux-2.6.13-rc5/fs/hostfs/hostfs_kern.c
--- linux-2.6.13-rc4/fs/hostfs/hostfs_kern.c	2005-08-01 22:29:05.221353402 -0700
+++ linux-2.6.13-rc5/fs/hostfs/hostfs_kern.c	2005-08-01 22:29:12.463671711 -0700
@@ -382,7 +382,7 @@
 
 int hostfs_fsync(struct file *file, struct dentry *dentry, int datasync)
 {
-	return(0);
+	return fsync_file(HOSTFS_I(dentry->d_inode)->fd, datasync);
 }
 
 static struct file_operations hostfs_file_fops = {
diff -urN linux-2.6.13-rc4/fs/hostfs/hostfs_user.c linux-2.6.13-rc5/fs/hostfs/hostfs_user.c
--- linux-2.6.13-rc4/fs/hostfs/hostfs_user.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/fs/hostfs/hostfs_user.c	2005-08-01 22:29:12.463671711 -0700
@@ -153,10 +153,24 @@
 	int ret;
 
 	ret = lseek64(fd, offset, whence);
-	if(ret < 0) return(-errno);
+	if(ret < 0)
+		return(-errno);
 	return(0);
 }
 
+int fsync_file(int fd, int datasync)
+{
+	int ret;
+	if (datasync)
+		ret = fdatasync(fd);
+	else
+		ret = fsync(fd);
+
+	if (ret < 0)
+		return -errno;
+	return 0;
+}
+
 void close_file(void *stream)
 {
 	close(*((int *) stream));
diff -urN linux-2.6.13-rc4/fs/inotify.c linux-2.6.13-rc5/fs/inotify.c
--- linux-2.6.13-rc4/fs/inotify.c	2005-08-01 22:29:05.224353534 -0700
+++ linux-2.6.13-rc5/fs/inotify.c	2005-08-01 22:29:12.467671887 -0700
@@ -90,6 +90,7 @@
 	unsigned int		queue_size;	/* size of the queue (bytes) */
 	unsigned int		event_count;	/* number of pending events */
 	unsigned int		max_events;	/* maximum number of events */
+	u32			last_wd;	/* the last wd allocated */
 };
 
 /*
@@ -352,7 +353,7 @@
 	do {
 		if (unlikely(!idr_pre_get(&dev->idr, GFP_KERNEL)))
 			return -ENOSPC;
-		ret = idr_get_new(&dev->idr, watch, &watch->wd);
+		ret = idr_get_new_above(&dev->idr, watch, dev->last_wd, &watch->wd);
 	} while (ret == -EAGAIN);
 
 	return ret;
@@ -401,6 +402,7 @@
 		return ERR_PTR(ret);
 	}
 
+	dev->last_wd = ret;
 	watch->mask = mask;
 	atomic_set(&watch->count, 0);
 	INIT_LIST_HEAD(&watch->d_list);
@@ -899,6 +901,7 @@
 	dev->queue_size = 0;
 	dev->max_events = inotify_max_queued_events;
 	dev->user = user;
+	dev->last_wd = 0;
 	atomic_set(&dev->count, 0);
 
 	get_inotify_dev(dev);
diff -urN linux-2.6.13-rc4/fs/namei.c linux-2.6.13-rc5/fs/namei.c
--- linux-2.6.13-rc4/fs/namei.c	2005-08-01 22:29:05.275355776 -0700
+++ linux-2.6.13-rc5/fs/namei.c	2005-08-01 22:29:12.512673865 -0700
@@ -2218,7 +2218,7 @@
 		error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
 	if (!error) {
 		const char *new_name = old_dentry->d_name.name;
-		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir);
+		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
 	}
 	fsnotify_oldname_free(old_name);
 
diff -urN linux-2.6.13-rc4/fs/sysfs/file.c linux-2.6.13-rc5/fs/sysfs/file.c
--- linux-2.6.13-rc4/fs/sysfs/file.c	2005-08-01 22:29:05.432362676 -0700
+++ linux-2.6.13-rc5/fs/sysfs/file.c	2005-08-01 22:29:12.668680721 -0700
@@ -437,8 +437,8 @@
 {
 	struct dentry *dir = kobj->dentry;
 	struct dentry *victim;
-	struct sysfs_dirent *sd;
-	umode_t umode = (mode & S_IALLUGO) | S_IFREG;
+	struct inode * inode;
+	struct iattr newattrs;
 	int res = -ENOENT;
 
 	down(&dir->d_inode->i_sem);
@@ -446,13 +446,15 @@
 	if (!IS_ERR(victim)) {
 		if (victim->d_inode &&
 		    (victim->d_parent->d_inode == dir->d_inode)) {
-			sd = victim->d_fsdata;
-			attr->mode = mode;
-			sd->s_mode = umode;
-			victim->d_inode->i_mode = umode;
-			dput(victim);
-			res = 0;
+			inode = victim->d_inode;
+			down(&inode->i_sem);
+			newattrs.ia_mode = (mode & S_IALLUGO) |
+						(inode->i_mode & ~S_IALLUGO);
+			newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
+			res = notify_change(victim, &newattrs);
+			up(&inode->i_sem);
 		}
+		dput(victim);
 	}
 	up(&dir->d_inode->i_sem);
 
diff -urN linux-2.6.13-rc4/fs/sysfs/inode.c linux-2.6.13-rc5/fs/sysfs/inode.c
--- linux-2.6.13-rc4/fs/sysfs/inode.c	2005-08-01 22:29:05.433362720 -0700
+++ linux-2.6.13-rc5/fs/sysfs/inode.c	2005-08-01 22:29:12.669680765 -0700
@@ -85,7 +85,7 @@
 
 		if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
 			mode &= ~S_ISGID;
-		sd_iattr->ia_mode = mode;
+		sd_iattr->ia_mode = sd->s_mode = mode;
 	}
 
 	return error;
diff -urN linux-2.6.13-rc4/include/acpi/acpi_drivers.h linux-2.6.13-rc5/include/acpi/acpi_drivers.h
--- linux-2.6.13-rc4/include/acpi/acpi_drivers.h	2005-08-01 22:29:05.501365709 -0700
+++ linux-2.6.13-rc5/include/acpi/acpi_drivers.h	2005-08-01 22:29:12.737683754 -0700
@@ -56,8 +56,9 @@
 /* ACPI PCI Interrupt Link (pci_link.c) */
 
 int acpi_irq_penalty_init (void);
-int acpi_pci_link_get_irq (acpi_handle handle, int index, int *edge_level,
+int acpi_pci_link_allocate_irq (acpi_handle handle, int index, int *edge_level,
 	int *active_high_low, char **name);
+int acpi_pci_link_free_irq(acpi_handle handle);
 
 /* ACPI PCI Interrupt Routing (pci_irq.c) */
 
diff -urN linux-2.6.13-rc4/include/asm-arm/bitops.h linux-2.6.13-rc5/include/asm-arm/bitops.h
--- linux-2.6.13-rc4/include/asm-arm/bitops.h	2005-08-01 22:29:05.524366720 -0700
+++ linux-2.6.13-rc5/include/asm-arm/bitops.h	2005-08-01 22:29:12.761684809 -0700
@@ -229,6 +229,7 @@
 extern int _find_first_bit_be(const unsigned long *p, unsigned size);
 extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 
+#ifndef CONFIG_SMP
 /*
  * The __* form of bitops are non-atomic and may be reordered.
  */
@@ -241,6 +242,10 @@
 	(__builtin_constant_p(nr) ?		\
 	 ____atomic_##name(nr, p) :		\
 	 _##name##_be(nr,p))
+#else
+#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
+#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#endif
 
 #define NONATOMIC_BITOP(name,nr,p)		\
 	(____nonatomic_##name(nr, p))
diff -urN linux-2.6.13-rc4/include/asm-generic/sections.h linux-2.6.13-rc5/include/asm-generic/sections.h
--- linux-2.6.13-rc4/include/asm-generic/sections.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-generic/sections.h	2005-08-01 22:29:12.861689204 -0700
@@ -11,5 +11,6 @@
 extern char _sextratext[] __attribute__((weak));
 extern char _eextratext[] __attribute__((weak));
 extern char _end[];
+extern char __per_cpu_start[], __per_cpu_end[];
 
 #endif /* _ASM_GENERIC_SECTIONS_H_ */
diff -urN linux-2.6.13-rc4/include/asm-i386/bitops.h linux-2.6.13-rc5/include/asm-i386/bitops.h
--- linux-2.6.13-rc4/include/asm-i386/bitops.h	2005-08-01 22:29:05.626371203 -0700
+++ linux-2.6.13-rc5/include/asm-i386/bitops.h	2005-08-01 22:29:12.863689292 -0700
@@ -335,14 +335,13 @@
 static inline int find_first_bit(const unsigned long *addr, unsigned size)
 {
 	int x = 0;
-	do {
-		if (*addr)
-			return __ffs(*addr) + x;
-		addr++;
-		if (x >= size)
-			break;
+
+	while (x < size) {
+		unsigned long val = *addr++;
+		if (val)
+			return __ffs(val) + x;
 		x += (sizeof(*addr)<<3);
-	} while (1);
+	}
 	return x;
 }
 
diff -urN linux-2.6.13-rc4/include/asm-i386/smp.h linux-2.6.13-rc5/include/asm-i386/smp.h
--- linux-2.6.13-rc4/include/asm-i386/smp.h	2005-08-01 22:29:05.633371511 -0700
+++ linux-2.6.13-rc5/include/asm-i386/smp.h	2005-08-01 22:29:12.870689600 -0700
@@ -37,9 +37,6 @@
 extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
 
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
-extern void smp_invalidate_rcv(void);		/* Process an NMI */
 extern void (*mtrr_hook) (void);
 extern void zap_low_mappings (void);
 extern void lock_ipi_call_lock(void);
diff -urN linux-2.6.13-rc4/include/asm-ppc/ibm44x.h linux-2.6.13-rc5/include/asm-ppc/ibm44x.h
--- linux-2.6.13-rc4/include/asm-ppc/ibm44x.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-ppc/ibm44x.h	2005-08-01 22:29:12.900690919 -0700
@@ -35,8 +35,10 @@
 #define PPC44x_LOW_SLOT		63
 
 /* LS 32-bits of UART0 physical address location for early serial text debug */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define UART0_PHYS_IO_BASE	0xf0000200
+#elif defined(CONFIG_440EP)
+#define UART0_PHYS_IO_BASE	0xe0000000
 #else
 #define UART0_PHYS_IO_BASE	0x40000200
 #endif
@@ -49,11 +51,16 @@
 /*
  * Standard 4GB "page" definitions
  */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define	PPC44x_IO_PAGE		0x0000000100000000ULL
 #define	PPC44x_PCICFG_PAGE	0x0000000900000000ULL
 #define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
 #define	PPC44x_PCIMEM_PAGE	0x0000000a00000000ULL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_PAGE		0x0000000000000000ULL
+#define PPC44x_PCICFG_PAGE	0x0000000000000000ULL
+#define PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
+#define PPC44x_PCIMEM_PAGE	0x0000000000000000ULL
 #else
 #define	PPC44x_IO_PAGE		0x0000000100000000ULL
 #define	PPC44x_PCICFG_PAGE	0x0000000200000000ULL
@@ -64,7 +71,7 @@
 /*
  * 36-bit trap ranges
  */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define PPC44x_IO_LO		0xf0000000UL
 #define PPC44x_IO_HI		0xf0000fffUL
 #define PPC44x_PCI0CFG_LO	0x0ec00000UL
@@ -75,6 +82,13 @@
 #define PPC44x_PCI2CFG_HI	0x2ec00007UL
 #define PPC44x_PCIMEM_LO	0x80000000UL
 #define PPC44x_PCIMEM_HI	0xdfffffffUL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_LO		0xef500000UL
+#define PPC44x_IO_HI		0xefffffffUL
+#define PPC44x_PCI0CFG_LO	0xeec00000UL
+#define PPC44x_PCI0CFG_HI	0xeecfffffUL
+#define PPC44x_PCIMEM_LO	0xa0000000UL
+#define PPC44x_PCIMEM_HI	0xdfffffffUL
 #else
 #define PPC44x_IO_LO		0x40000000UL
 #define PPC44x_IO_HI		0x40000fffUL
@@ -152,6 +166,12 @@
 #define DCRN_SDR_UART0		0x0120
 #define DCRN_SDR_UART1		0x0121
 
+#ifdef CONFIG_440EP
+#define DCRN_SDR_UART2		0x0122
+#define DCRN_SDR_UART3		0x0123
+#define DCRN_SDR_CUST0		0x4000
+#endif
+
 /* SDR read/write helper macros */
 #define SDR_READ(offset) ({\
 	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
@@ -169,6 +189,14 @@
 #define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
 #define DCRN_MAL_BASE		0x180
 
+#ifdef CONFIG_440EP
+#define DCRN_DMA2P40_BASE	0x300
+#define DCRN_DMA2P41_BASE	0x308
+#define DCRN_DMA2P42_BASE	0x310
+#define DCRN_DMA2P43_BASE	0x318
+#define DCRN_DMA2P4SR_BASE	0x320
+#endif
+
 /* UIC */
 #define DCRN_UIC0_BASE	0xc0
 #define DCRN_UIC1_BASE	0xd0
diff -urN linux-2.6.13-rc4/include/asm-ppc/ibm4xx.h linux-2.6.13-rc5/include/asm-ppc/ibm4xx.h
--- linux-2.6.13-rc4/include/asm-ppc/ibm4xx.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-ppc/ibm4xx.h	2005-08-01 22:29:12.900690919 -0700
@@ -97,6 +97,10 @@
 
 #elif CONFIG_44x
 
+#if defined(CONFIG_BAMBOO)
+#include <platforms/4xx/bamboo.h>
+#endif
+
 #if defined(CONFIG_EBONY)
 #include <platforms/4xx/ebony.h>
 #endif
diff -urN linux-2.6.13-rc4/include/asm-ppc/ibm_ocp.h linux-2.6.13-rc5/include/asm-ppc/ibm_ocp.h
--- linux-2.6.13-rc4/include/asm-ppc/ibm_ocp.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-ppc/ibm_ocp.h	2005-08-01 22:29:12.901690962 -0700
@@ -71,6 +71,8 @@
 
 /* Sysfs support */
 #define OCP_SYSFS_EMAC_DATA()						\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx)	\
@@ -78,9 +80,14 @@
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map)	\
 									\
 void ocp_show_emac_data(struct device *dev)				\
 {									\
+	device_create_file(dev, &dev_attr_emac_rgmii_idx);		\
+	device_create_file(dev, &dev_attr_emac_rgmii_mux);		\
 	device_create_file(dev, &dev_attr_emac_zmii_idx);		\
 	device_create_file(dev, &dev_attr_emac_zmii_mux);		\
 	device_create_file(dev, &dev_attr_emac_mal_idx);		\
@@ -88,6 +95,9 @@
 	device_create_file(dev, &dev_attr_emac_mal_tx_chan);		\
 	device_create_file(dev, &dev_attr_emac_wol_irq);		\
 	device_create_file(dev, &dev_attr_emac_mdio_idx);		\
+	device_create_file(dev, &dev_attr_emac_tah_idx);		\
+	device_create_file(dev, &dev_attr_emac_phy_mode);		\
+	device_create_file(dev, &dev_attr_emac_phy_map);		\
 }
 
 #ifdef CONFIG_40x
@@ -157,7 +167,7 @@
 									\
 void ocp_show_iic_data(struct device *dev)				\
 {									\
-	device_create_file(dev, &dev_attr_iic_fast_mode);			\
+	device_create_file(dev, &dev_attr_iic_fast_mode);		\
 }
 #endif /* __IBM_OCP_H__ */
 #endif /* __KERNEL__ */
diff -urN linux-2.6.13-rc4/include/asm-ppc/ppc_asm.h linux-2.6.13-rc5/include/asm-ppc/ppc_asm.h
--- linux-2.6.13-rc4/include/asm-ppc/ppc_asm.h	2005-08-01 22:29:05.667373005 -0700
+++ linux-2.6.13-rc5/include/asm-ppc/ppc_asm.h	2005-08-01 22:29:12.906691182 -0700
@@ -186,6 +186,12 @@
 #define PPC405_ERR77_SYNC
 #endif
 
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
 /* The boring bits... */
 
 /* Condition Register Bit Fields */
diff -urN linux-2.6.13-rc4/include/asm-ppc/unistd.h linux-2.6.13-rc5/include/asm-ppc/unistd.h
--- linux-2.6.13-rc4/include/asm-ppc/unistd.h	2005-08-01 22:29:05.669373093 -0700
+++ linux-2.6.13-rc5/include/asm-ppc/unistd.h	2005-08-01 22:29:12.908691270 -0700
@@ -279,8 +279,11 @@
 #define __NR_waitid		272
 #define __NR_ioprio_set		273
 #define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
 
-#define __NR_syscalls		275
+#define __NR_syscalls		278
 
 #define __NR(n)	#n
 
diff -urN linux-2.6.13-rc4/include/asm-ppc64/topology.h linux-2.6.13-rc5/include/asm-ppc64/topology.h
--- linux-2.6.13-rc4/include/asm-ppc64/topology.h	2005-08-01 22:29:05.695374236 -0700
+++ linux-2.6.13-rc5/include/asm-ppc64/topology.h	2005-08-01 22:29:12.934692413 -0700
@@ -33,6 +33,7 @@
 	return first_cpu(tmp);
 }
 
+#define pcibus_to_node(node)    (-1)
 #define pcibus_to_cpumask(bus)	(cpu_online_map)
 
 #define nr_cpus_node(node)	(nr_cpus_in_node[node])
@@ -59,8 +60,10 @@
 	.nr_balance_failed	= 0,			\
 }
 
-#endif /* CONFIG_NUMA */
+#else
 
 #include <asm-generic/topology.h>
 
+#endif /* CONFIG_NUMA */
+
 #endif /* _ASM_PPC64_TOPOLOGY_H */
diff -urN linux-2.6.13-rc4/include/asm-ppc64/unistd.h linux-2.6.13-rc5/include/asm-ppc64/unistd.h
--- linux-2.6.13-rc4/include/asm-ppc64/unistd.h	2005-08-01 22:29:05.695374236 -0700
+++ linux-2.6.13-rc5/include/asm-ppc64/unistd.h	2005-08-01 22:29:12.934692413 -0700
@@ -285,8 +285,11 @@
 #define __NR_waitid		272
 #define __NR_ioprio_set		273
 #define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
 
-#define __NR_syscalls		275
+#define __NR_syscalls		278
 #ifdef __KERNEL__
 #define NR_syscalls	__NR_syscalls
 #endif
diff -urN linux-2.6.13-rc4/include/asm-s390/unistd.h linux-2.6.13-rc5/include/asm-s390/unistd.h
--- linux-2.6.13-rc4/include/asm-s390/unistd.h	2005-08-01 22:29:05.702374544 -0700
+++ linux-2.6.13-rc5/include/asm-s390/unistd.h	2005-08-01 22:29:12.941692721 -0700
@@ -274,8 +274,13 @@
 #define __NR_request_key	279
 #define __NR_keyctl		280
 #define __NR_waitid		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
 
-#define NR_syscalls 282
+#define NR_syscalls 287
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff -urN linux-2.6.13-rc4/include/asm-um/vm86.h linux-2.6.13-rc5/include/asm-um/vm86.h
--- linux-2.6.13-rc4/include/asm-um/vm86.h	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/include/asm-um/vm86.h	2005-08-01 22:29:12.955693336 -0700
@@ -0,0 +1,6 @@
+#ifndef __UM_VM86_H
+#define __UM_VM86_H
+
+#include "asm/arch/vm86.h"
+
+#endif
diff -urN linux-2.6.13-rc4/include/asm-x86_64/bitops.h linux-2.6.13-rc5/include/asm-x86_64/bitops.h
--- linux-2.6.13-rc4/include/asm-x86_64/bitops.h	2005-08-01 22:29:05.721375379 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/bitops.h	2005-08-01 22:29:12.959693512 -0700
@@ -348,8 +348,7 @@
 		return __ffs(b[0]);
 	if (b[1])
 		return __ffs(b[1]) + 64;
-	if (b[2])
-		return __ffs(b[2]) + 128;
+	return __ffs(b[2]) + 128;
 }
 
 /**
diff -urN linux-2.6.13-rc4/include/asm-x86_64/bug.h linux-2.6.13-rc5/include/asm-x86_64/bug.h
--- linux-2.6.13-rc4/include/asm-x86_64/bug.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/bug.h	2005-08-01 22:29:12.959693512 -0700
@@ -8,17 +8,24 @@
  * this frame.
  */
 struct bug_frame {
-       unsigned char ud2[2];
+	unsigned char ud2[2];
+	unsigned char mov;
 	/* should use 32bit offset instead, but the assembler doesn't 
 	   like it */
 	char *filename;
+	unsigned char ret;
 	unsigned short line;
 } __attribute__((packed));
 
 #ifdef CONFIG_BUG
 #define HAVE_ARCH_BUG
-#define BUG() \
-	asm volatile("ud2 ; .quad %c1 ; .short %c0" :: \
+/* We turn the bug frame into valid instructions to not confuse
+   the disassembler. Thanks to Jan Beulich & Suresh Siddha
+   for nice instruction selection.
+   The magic numbers generate mov $64bitimm,%eax ; ret $offset. */
+#define BUG() 								\
+	asm volatile(							\
+	"ud2 ; .byte 0xa3 ; .quad %c1 ; .byte 0xc2 ; .short %c0" :: 	\
 		     "i"(__LINE__), "i" (__stringify(__FILE__)))
 void out_of_line_bug(void);
 #else
diff -urN linux-2.6.13-rc4/include/asm-x86_64/desc.h linux-2.6.13-rc5/include/asm-x86_64/desc.h
--- linux-2.6.13-rc4/include/asm-x86_64/desc.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/desc.h	2005-08-01 22:29:12.960693556 -0700
@@ -75,6 +75,7 @@
  */
 extern struct desc_struct default_ldt[];
 extern struct gate_struct idt_table[]; 
+extern struct desc_ptr cpu_gdt_descr[];
 
 static inline void _set_gate(void *adr, unsigned type, unsigned long func, unsigned dpl, unsigned ist)  
 {
diff -urN linux-2.6.13-rc4/include/asm-x86_64/ipi.h linux-2.6.13-rc5/include/asm-x86_64/ipi.h
--- linux-2.6.13-rc4/include/asm-x86_64/ipi.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/ipi.h	2005-08-01 22:29:12.961693600 -0700
@@ -82,30 +82,27 @@
 	 */
 	local_irq_save(flags);
 
-	for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
-		if (cpu_isset(query_cpu, mask)) {
-
-			/*
-			 * Wait for idle.
-			 */
-			apic_wait_icr_idle();
-
-			/*
-			 * prepare target chip field
-			 */
-			cfg = __prepare_ICR2(x86_cpu_to_apicid[query_cpu]);
-			apic_write_around(APIC_ICR2, cfg);
-
-			/*
-			 * program the ICR
-			 */
-			cfg = __prepare_ICR(0, vector, APIC_DEST_PHYSICAL);
-
-			/*
-			 * Send the IPI. The write to APIC_ICR fires this off.
-			 */
-			apic_write_around(APIC_ICR, cfg);
-		}
+	for_each_cpu_mask(query_cpu, mask) {
+		/*
+		 * Wait for idle.
+		 */
+		apic_wait_icr_idle();
+
+		/*
+		 * prepare target chip field
+		 */
+		cfg = __prepare_ICR2(x86_cpu_to_apicid[query_cpu]);
+		apic_write_around(APIC_ICR2, cfg);
+
+		/*
+		 * program the ICR
+		 */
+		cfg = __prepare_ICR(0, vector, APIC_DEST_PHYSICAL);
+
+		/*
+		 * Send the IPI. The write to APIC_ICR fires this off.
+		 */
+		apic_write_around(APIC_ICR, cfg);
 	}
 	local_irq_restore(flags);
 }
diff -urN linux-2.6.13-rc4/include/asm-x86_64/irq.h linux-2.6.13-rc5/include/asm-x86_64/irq.h
--- linux-2.6.13-rc4/include/asm-x86_64/irq.h	2005-08-01 22:29:05.723375467 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/irq.h	2005-08-01 22:29:12.961693600 -0700
@@ -57,4 +57,6 @@
 extern void fixup_irqs(cpumask_t map);
 #endif
 
+#define __ARCH_HAS_DO_SOFTIRQ 1
+
 #endif /* _ASM_IRQ_H */
diff -urN linux-2.6.13-rc4/include/asm-x86_64/msr.h linux-2.6.13-rc5/include/asm-x86_64/msr.h
--- linux-2.6.13-rc4/include/asm-x86_64/msr.h	2005-08-01 22:29:05.724375511 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/msr.h	2005-08-01 22:29:12.962693644 -0700
@@ -218,7 +218,7 @@
 #define MSR_K7_PERFCTR3            0xC0010007
 #define MSR_K8_TOP_MEM1		   0xC001001A
 #define MSR_K8_TOP_MEM2		   0xC001001D
-#define MSR_K8_SYSCFG		   0xC0000010	
+#define MSR_K8_SYSCFG		   0xC0010010
 
 /* K6 MSRs */
 #define MSR_K6_EFER			0xC0000080
diff -urN linux-2.6.13-rc4/include/asm-x86_64/pgtable.h linux-2.6.13-rc5/include/asm-x86_64/pgtable.h
--- linux-2.6.13-rc4/include/asm-x86_64/pgtable.h	2005-08-01 22:29:05.725375555 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/pgtable.h	2005-08-01 22:29:12.964693732 -0700
@@ -176,6 +176,8 @@
 	(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_PCD)
 #define __PAGE_KERNEL_LARGE \
 	(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC \
+	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
 
 #define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
 
diff -urN linux-2.6.13-rc4/include/asm-x86_64/smp.h linux-2.6.13-rc5/include/asm-x86_64/smp.h
--- linux-2.6.13-rc4/include/asm-x86_64/smp.h	2005-08-01 22:29:05.727375642 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/smp.h	2005-08-01 22:29:12.965693775 -0700
@@ -46,12 +46,12 @@
 extern void lock_ipi_call_lock(void);
 extern void unlock_ipi_call_lock(void);
 extern int smp_num_siblings;
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
 extern void smp_send_reschedule(int cpu);
-extern void smp_invalidate_rcv(void);		/* Process an NMI */
 extern void zap_low_mappings(void);
 void smp_stop_cpu(void);
+extern int smp_call_function_single(int cpuid, void (*func) (void *info),
+				void *info, int retry, int wait);
+
 extern cpumask_t cpu_sibling_map[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 extern u8 phys_proc_id[NR_CPUS];
diff -urN linux-2.6.13-rc4/include/asm-x86_64/system.h linux-2.6.13-rc5/include/asm-x86_64/system.h
--- linux-2.6.13-rc4/include/asm-x86_64/system.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/system.h	2005-08-01 22:29:12.966693819 -0700
@@ -116,12 +116,12 @@
 /*
  * Alternative inline assembly with input.
  * 
- * Pecularities:
+ * Peculiarities:
  * No memory clobber here. 
  * Argument numbers start with 1.
  * Best is to use constraints that are fixed size (like (%1) ... "r")
  * If you use variable sized constraints like "m" or "g" in the 
- * replacement maake sure to pad to the worst case length.
+ * replacement make sure to pad to the worst case length.
  */
 #define alternative_input(oldinstr, newinstr, feature, input...)	\
 	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
@@ -335,9 +335,6 @@
 void disable_hlt(void);
 void enable_hlt(void);
 
-#define HAVE_EAT_KEY
-void eat_key(void);
-
 extern unsigned long arch_align_stack(unsigned long sp);
 
 #endif
diff -urN linux-2.6.13-rc4/include/asm-x86_64/tlbflush.h linux-2.6.13-rc5/include/asm-x86_64/tlbflush.h
--- linux-2.6.13-rc4/include/asm-x86_64/tlbflush.h	2005-08-01 22:29:05.728375686 -0700
+++ linux-2.6.13-rc5/include/asm-x86_64/tlbflush.h	2005-08-01 22:29:12.967693863 -0700
@@ -56,8 +56,9 @@
  *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
  *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
  *
- * ..but the x86_64 has somewhat limited tlb flushing capabilities,
- * and page-granular flushes are available only on i486 and up.
+ * x86-64 can only flush individual pages or full VMs. For a range flush
+ * we always do the full VM. Might be worth trying if for a small
+ * range a few INVLPGs in a row are a win.
  */
 
 #ifndef CONFIG_SMP
@@ -115,7 +116,9 @@
 static inline void flush_tlb_pgtables(struct mm_struct *mm,
 				      unsigned long start, unsigned long end)
 {
-	/* x86_64 does not keep any page table caches in TLB */
+	/* x86_64 does not keep any page table caches in a software TLB.
+	   The CPUs do in their hardware TLBs, but they are handled
+	   by the normal TLB flushing algorithms. */
 }
 
 #endif /* _X8664_TLBFLUSH_H */
diff -urN linux-2.6.13-rc4/include/linux/acpi.h linux-2.6.13-rc5/include/linux/acpi.h
--- linux-2.6.13-rc4/include/linux/acpi.h	2005-08-01 22:29:05.770377532 -0700
+++ linux-2.6.13-rc5/include/linux/acpi.h	2005-08-01 22:29:13.007695622 -0700
@@ -453,9 +453,7 @@
  * If this matches the last registration, any IRQ resources for gsi
  * are freed.
  */
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
 void acpi_unregister_gsi (u32 gsi);
-#endif
 
 #ifdef CONFIG_ACPI_PCI
 
@@ -480,9 +478,7 @@
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
 void acpi_pci_irq_disable (struct pci_dev *dev);
-#endif
 
 struct acpi_pci_driver {
 	struct acpi_pci_driver *next;
diff -urN linux-2.6.13-rc4/include/linux/dcookies.h linux-2.6.13-rc5/include/linux/dcookies.h
--- linux-2.6.13-rc4/include/linux/dcookies.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/linux/dcookies.h	2005-08-01 22:29:13.013695885 -0700
@@ -48,12 +48,12 @@
 
 #else
 
-struct dcookie_user * dcookie_register(void)
+static inline struct dcookie_user * dcookie_register(void)
 {
 	return NULL;
 }
 
-void dcookie_unregister(struct dcookie_user * user)
+static inline void dcookie_unregister(struct dcookie_user * user)
 {
 	return;
 }
diff -urN linux-2.6.13-rc4/include/linux/fsnotify.h linux-2.6.13-rc5/include/linux/fsnotify.h
--- linux-2.6.13-rc4/include/linux/fsnotify.h	2005-08-01 22:29:05.783378104 -0700
+++ linux-2.6.13-rc5/include/linux/fsnotify.h	2005-08-01 22:29:13.020696193 -0700
@@ -21,7 +21,7 @@
  */
 static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 				 const char *old_name, const char *new_name,
-				 int isdir)
+				 int isdir, struct inode *target)
 {
 	u32 cookie = inotify_get_cookie();
 
@@ -36,6 +36,11 @@
 		isdir = IN_ISDIR;
 	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name);
 	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name);
+
+	if (target) {
+		inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL);
+		inotify_inode_is_dead(target);
+	}
 }
 
 /*
diff -urN linux-2.6.13-rc4/include/linux/input.h linux-2.6.13-rc5/include/linux/input.h
--- linux-2.6.13-rc4/include/linux/input.h	2005-08-01 22:29:05.792378499 -0700
+++ linux-2.6.13-rc5/include/linux/input.h	2005-08-01 22:29:13.030696632 -0700
@@ -811,9 +811,9 @@
 
 	void *private;
 
-	char *name;
-	char *phys;
-	char *uniq;
+	const char *name;
+	const char *phys;
+	const char *uniq;
 	struct input_id id;
 
 	unsigned long evbit[NBITS(EV_MAX)];
diff -urN linux-2.6.13-rc4/include/linux/pci.h linux-2.6.13-rc5/include/linux/pci.h
--- linux-2.6.13-rc4/include/linux/pci.h	2005-08-01 22:29:05.821379774 -0700
+++ linux-2.6.13-rc5/include/linux/pci.h	2005-08-01 22:29:13.058697863 -0700
@@ -971,6 +971,8 @@
 
 #define	isa_bridge	((struct pci_dev *)NULL)
 
+#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+
 #else
 
 /*
@@ -985,9 +987,6 @@
 	return 0;
 }
 #endif
-
-#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
-
 #endif /* !CONFIG_PCI */
 
 /* these helpers provide future and backwards compatibility
diff -urN linux-2.6.13-rc4/include/linux/uinput.h linux-2.6.13-rc5/include/linux/uinput.h
--- linux-2.6.13-rc4/include/linux/uinput.h	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/include/linux/uinput.h	2005-08-01 22:29:13.087699138 -0700
@@ -42,8 +42,7 @@
 	int			code;	/* UI_FF_UPLOAD, UI_FF_ERASE */
 
 	int			retval;
-	wait_queue_head_t	waitq;
-	int			completed;
+	struct completion	done;
 
 	union {
 		int		effect_id;
@@ -62,7 +61,7 @@
 
 	struct uinput_request	*requests[UINPUT_NUM_REQUESTS];
 	wait_queue_head_t	requests_waitq;
-	struct semaphore	requests_sem;
+	spinlock_t		requests_lock;
 };
 #endif	/* __KERNEL__ */
 
diff -urN linux-2.6.13-rc4/include/linux/usb_input.h linux-2.6.13-rc5/include/linux/usb_input.h
--- linux-2.6.13-rc4/include/linux/usb_input.h	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13-rc5/include/linux/usb_input.h	2005-08-01 22:29:13.090699270 -0700
@@ -0,0 +1,25 @@
+#ifndef __USB_INPUT_H
+#define __USB_INPUT_H
+
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+	id->bustype = BUS_USB;
+	id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+	id->product = le16_to_cpu(dev->descriptor.idProduct);
+	id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif
diff -urN linux-2.6.13-rc4/include/media/tuner.h linux-2.6.13-rc5/include/media/tuner.h
--- linux-2.6.13-rc4/include/media/tuner.h	2005-08-01 22:29:05.860381488 -0700
+++ linux-2.6.13-rc5/include/media/tuner.h	2005-08-01 22:29:13.096699533 -0700
@@ -1,5 +1,5 @@
 
-/* $Id: tuner.h,v 1.42 2005/07/06 09:42:19 mchehab Exp $
+/* $Id: tuner.h,v 1.45 2005/07/28 18:41:21 mchehab Exp $
  *
     tuner.h - definition for different tuners
 
@@ -108,6 +108,8 @@
 
 #define TUNER_TEA5767         62	/* Only FM Radio Tuner */
 #define TUNER_PHILIPS_FMD1216ME_MK3 63
+#define TUNER_LG_TDVS_H062F   64	/* DViCO FusionHDTV 5 */
+#define TUNER_YMEC_TVF66T5_B_DFF 65	/* Acorp Y878F */
 
 #define NOTUNER 0
 #define PAL     1	/* PAL_BG */
diff -urN linux-2.6.13-rc4/include/net/tcp.h linux-2.6.13-rc5/include/net/tcp.h
--- linux-2.6.13-rc4/include/net/tcp.h	2005-08-01 22:29:05.872382016 -0700
+++ linux-2.6.13-rc5/include/net/tcp.h	2005-08-01 22:29:13.109700105 -0700
@@ -1236,7 +1236,7 @@
 	tp->left_out = tp->sacked_out + tp->lost_out;
 }
 
-/* Set slow start threshould and cwnd not falling to slow start */
+/* Set slow start threshold and cwnd not falling to slow start */
 static inline void __tcp_enter_cwr(struct tcp_sock *tp)
 {
 	tp->undo_marker = 0;
diff -urN linux-2.6.13-rc4/init/main.c linux-2.6.13-rc5/init/main.c
--- linux-2.6.13-rc4/init/main.c	2005-08-01 22:29:05.887382675 -0700
+++ linux-2.6.13-rc5/init/main.c	2005-08-01 22:29:13.124700764 -0700
@@ -51,6 +51,7 @@
 #include <asm/io.h>
 #include <asm/bugs.h>
 #include <asm/setup.h>
+#include <asm/sections.h>
 
 /*
  * This is one of the first .c files built. Error out early
@@ -323,8 +324,6 @@
 {
 	unsigned long size, i;
 	char *ptr;
-	/* Created by linker magic */
-	extern char __per_cpu_start[], __per_cpu_end[];
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
diff -urN linux-2.6.13-rc4/ipc/shm.c linux-2.6.13-rc5/ipc/shm.c
--- linux-2.6.13-rc4/ipc/shm.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/ipc/shm.c	2005-08-01 22:29:13.126700852 -0700
@@ -170,7 +170,7 @@
 	.open	= shm_open,	/* callback for a new vm-area open */
 	.close	= shm_close,	/* callback for when the vm-area is released */
 	.nopage	= shmem_nopage,
-#ifdef CONFIG_NUMA
+#if defined(CONFIG_NUMA) && defined(CONFIG_SHMEM)
 	.set_policy = shmem_set_policy,
 	.get_policy = shmem_get_policy,
 #endif
diff -urN linux-2.6.13-rc4/kernel/module.c linux-2.6.13-rc5/kernel/module.c
--- linux-2.6.13-rc4/kernel/module.c	2005-08-01 22:29:05.901383290 -0700
+++ linux-2.6.13-rc5/kernel/module.c	2005-08-01 22:29:13.139701423 -0700
@@ -250,13 +250,18 @@
 /* Created by linker magic */
 extern char __per_cpu_start[], __per_cpu_end[];
 
-static void *percpu_modalloc(unsigned long size, unsigned long align)
+static void *percpu_modalloc(unsigned long size, unsigned long align,
+			     const char *name)
 {
 	unsigned long extra;
 	unsigned int i;
 	void *ptr;
 
-	BUG_ON(align > SMP_CACHE_BYTES);
+	if (align > SMP_CACHE_BYTES) {
+		printk(KERN_WARNING "%s: per-cpu alignment %li > %i\n",
+		       name, align, SMP_CACHE_BYTES);
+		align = SMP_CACHE_BYTES;
+	}
 
 	ptr = __per_cpu_start;
 	for (i = 0; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
@@ -348,7 +353,8 @@
 }	
 __initcall(percpu_modinit);
 #else /* ... !CONFIG_SMP */
-static inline void *percpu_modalloc(unsigned long size, unsigned long align)
+static inline void *percpu_modalloc(unsigned long size, unsigned long align,
+				    const char *name)
 {
 	return NULL;
 }
@@ -1644,7 +1650,8 @@
 	if (pcpuindex) {
 		/* We have a special allocation for this section. */
 		percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
-					 sechdrs[pcpuindex].sh_addralign);
+					 sechdrs[pcpuindex].sh_addralign,
+					 mod->name);
 		if (!percpu) {
 			err = -ENOMEM;
 			goto free_mod;
diff -urN linux-2.6.13-rc4/kernel/posix-timers.c linux-2.6.13-rc5/kernel/posix-timers.c
--- linux-2.6.13-rc4/kernel/posix-timers.c	2005-08-01 22:29:05.903383378 -0700
+++ linux-2.6.13-rc5/kernel/posix-timers.c	2005-08-01 22:29:13.141701511 -0700
@@ -896,21 +896,10 @@
 			jiffies_64_f = get_jiffies_64();
 		}
 		/*
-		 * Take away now to get delta
+		 * Take away now to get delta and normalize
 		 */
-		oc.tv_sec -= now.tv_sec;
-		oc.tv_nsec -= now.tv_nsec;
-		/*
-		 * Normalize...
-		 */
-		while ((oc.tv_nsec - NSEC_PER_SEC) >= 0) {
-			oc.tv_nsec -= NSEC_PER_SEC;
-			oc.tv_sec++;
-		}
-		while ((oc.tv_nsec) < 0) {
-			oc.tv_nsec += NSEC_PER_SEC;
-			oc.tv_sec--;
-		}
+		set_normalized_timespec(&oc, oc.tv_sec - now.tv_sec,
+					oc.tv_nsec - now.tv_nsec);
 	}else{
 		jiffies_64_f = get_jiffies_64();
 	}
diff -urN linux-2.6.13-rc4/kernel/sys.c linux-2.6.13-rc5/kernel/sys.c
--- linux-2.6.13-rc4/kernel/sys.c	2005-08-01 22:29:05.916383950 -0700
+++ linux-2.6.13-rc5/kernel/sys.c	2005-08-01 22:29:13.154702083 -0700
@@ -392,7 +392,6 @@
 	}
 	notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
 	system_state = SYSTEM_RESTART;
-	device_suspend(PMSG_FREEZE);
 	device_shutdown();
 	printk(KERN_EMERG "Starting new kernel\n");
 	machine_shutdown();
diff -urN linux-2.6.13-rc4/kernel/sys_ni.c linux-2.6.13-rc5/kernel/sys_ni.c
--- linux-2.6.13-rc4/kernel/sys_ni.c	2005-08-01 22:29:05.916383950 -0700
+++ linux-2.6.13-rc5/kernel/sys_ni.c	2005-08-01 22:29:13.155702127 -0700
@@ -79,7 +79,6 @@
 cond_syscall(sys_keyctl);
 cond_syscall(compat_sys_keyctl);
 cond_syscall(compat_sys_socketcall);
-cond_syscall(sys_set_zone_reclaim);
 cond_syscall(sys_inotify_init);
 cond_syscall(sys_inotify_add_watch);
 cond_syscall(sys_inotify_rm_watch);
diff -urN linux-2.6.13-rc4/lib/Kconfig.debug linux-2.6.13-rc5/lib/Kconfig.debug
--- linux-2.6.13-rc4/lib/Kconfig.debug	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/lib/Kconfig.debug	2005-08-01 22:29:13.158702258 -0700
@@ -141,7 +141,7 @@
 
 config DEBUG_FS
 	bool "Debug Filesystem"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && SYSFS
 	help
 	  debugfs is a virtual file system that kernel developers use to put
 	  debugging files into.  Enable this option to be able to read and
diff -urN linux-2.6.13-rc4/mm/memory.c linux-2.6.13-rc5/mm/memory.c
--- linux-2.6.13-rc4/mm/memory.c	2005-08-01 22:29:05.931384609 -0700
+++ linux-2.6.13-rc5/mm/memory.c	2005-08-01 22:29:13.169702742 -0700
@@ -811,18 +811,15 @@
 	pte = *ptep;
 	pte_unmap(ptep);
 	if (pte_present(pte)) {
-		if (write && !pte_write(pte))
+		if (write && !pte_dirty(pte))
 			goto out;
 		if (read && !pte_read(pte))
 			goto out;
 		pfn = pte_pfn(pte);
 		if (pfn_valid(pfn)) {
 			page = pfn_to_page(pfn);
-			if (accessed) {
-				if (write && !pte_dirty(pte) &&!PageDirty(page))
-					set_page_dirty(page);
+			if (accessed)
 				mark_page_accessed(page);
-			}
 			return page;
 		}
 	}
@@ -913,9 +910,13 @@
 			pud = pud_offset(pgd, pg);
 			BUG_ON(pud_none(*pud));
 			pmd = pmd_offset(pud, pg);
-			BUG_ON(pmd_none(*pmd));
+			if (pmd_none(*pmd))
+				return i ? : -EFAULT;
 			pte = pte_offset_map(pmd, pg);
-			BUG_ON(pte_none(*pte));
+			if (pte_none(*pte)) {
+				pte_unmap(pte);
+				return i ? : -EFAULT;
+			}
 			if (pages) {
 				pages[i] = pte_page(*pte);
 				get_page(pages[i]);
@@ -941,10 +942,9 @@
 		spin_lock(&mm->page_table_lock);
 		do {
 			struct page *page;
-			int lookup_write = write;
 
 			cond_resched_lock(&mm->page_table_lock);
-			while (!(page = follow_page(mm, start, lookup_write))) {
+			while (!(page = follow_page(mm, start, write))) {
 				/*
 				 * Shortcut for anonymous pages. We don't want
 				 * to force the creation of pages tables for
@@ -952,8 +952,7 @@
 				 * nobody touched so far. This is important
 				 * for doing a core dump for these mappings.
 				 */
-				if (!lookup_write &&
-				    untouched_anonymous_page(mm,vma,start)) {
+				if (!write && untouched_anonymous_page(mm,vma,start)) {
 					page = ZERO_PAGE(start);
 					break;
 				}
@@ -972,14 +971,6 @@
 				default:
 					BUG();
 				}
-				/*
-				 * Now that we have performed a write fault
-				 * and surely no longer have a shared page we
-				 * shouldn't write, we shouldn't ignore an
-				 * unwritable page in the page table if
-				 * we are forcing write access.
-				 */
-				lookup_write = write && !force;
 				spin_lock(&mm->page_table_lock);
 			}
 			if (pages) {
diff -urN linux-2.6.13-rc4/mm/mempolicy.c linux-2.6.13-rc5/mm/mempolicy.c
--- linux-2.6.13-rc4/mm/mempolicy.c	2005-08-01 22:29:05.932384653 -0700
+++ linux-2.6.13-rc5/mm/mempolicy.c	2005-08-01 22:29:13.170702786 -0700
@@ -443,7 +443,7 @@
 	struct mempolicy *new;
 	DECLARE_BITMAP(nodes, MAX_NUMNODES);
 
-	if (mode > MPOL_MAX)
+	if (mode < 0 || mode > MPOL_MAX)
 		return -EINVAL;
 	err = get_nodes(nodes, nmask, maxnode, mode);
 	if (err)
diff -urN linux-2.6.13-rc4/mm/page_alloc.c linux-2.6.13-rc5/mm/page_alloc.c
--- linux-2.6.13-rc4/mm/page_alloc.c	2005-08-01 22:29:05.937384873 -0700
+++ linux-2.6.13-rc5/mm/page_alloc.c	2005-08-01 22:29:13.176703050 -0700
@@ -1061,20 +1061,19 @@
 
 static unsigned int nr_free_zone_pages(int offset)
 {
-	pg_data_t *pgdat;
+	/* Just pick one node, since fallback list is circular */
+	pg_data_t *pgdat = NODE_DATA(numa_node_id());
 	unsigned int sum = 0;
 
-	for_each_pgdat(pgdat) {
-		struct zonelist *zonelist = pgdat->node_zonelists + offset;
-		struct zone **zonep = zonelist->zones;
-		struct zone *zone;
+	struct zonelist *zonelist = pgdat->node_zonelists + offset;
+	struct zone **zonep = zonelist->zones;
+	struct zone *zone;
 
-		for (zone = *zonep++; zone; zone = *zonep++) {
-			unsigned long size = zone->present_pages;
-			unsigned long high = zone->pages_high;
-			if (size > high)
-				sum += size - high;
-		}
+	for (zone = *zonep++; zone; zone = *zonep++) {
+		unsigned long size = zone->present_pages;
+		unsigned long high = zone->pages_high;
+		if (size > high)
+			sum += size - high;
 	}
 
 	return sum;
diff -urN linux-2.6.13-rc4/net/core/dev.c linux-2.6.13-rc5/net/core/dev.c
--- linux-2.6.13-rc4/net/core/dev.c	2005-08-01 22:29:05.955385664 -0700
+++ linux-2.6.13-rc5/net/core/dev.c	2005-08-01 22:29:13.194703841 -0700
@@ -901,8 +901,7 @@
 	smp_mb__after_clear_bit(); /* Commit netif_running(). */
 	while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) {
 		/* No hurry. */
-		current->state = TASK_INTERRUPTIBLE;
-		schedule_timeout(1);
+		msleep(1);
 	}
 
 	/*
diff -urN linux-2.6.13-rc4/net/core/dst.c linux-2.6.13-rc5/net/core/dst.c
--- linux-2.6.13-rc4/net/core/dst.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/net/core/dst.c	2005-08-01 22:29:13.194703841 -0700
@@ -45,6 +45,7 @@
 static void dst_run_gc(unsigned long dummy)
 {
 	int    delayed = 0;
+	int    work_performed;
 	struct dst_entry * dst, **dstp;
 
 	if (!spin_trylock(&dst_lock)) {
@@ -52,9 +53,9 @@
 		return;
 	}
 
-
 	del_timer(&dst_gc_timer);
 	dstp = &dst_garbage_list;
+	work_performed = 0;
 	while ((dst = *dstp) != NULL) {
 		if (atomic_read(&dst->__refcnt)) {
 			dstp = &dst->next;
@@ -62,6 +63,7 @@
 			continue;
 		}
 		*dstp = dst->next;
+		work_performed = 1;
 
 		dst = dst_destroy(dst);
 		if (dst) {
@@ -86,9 +88,14 @@
 		dst_gc_timer_inc = DST_GC_MAX;
 		goto out;
 	}
-	if ((dst_gc_timer_expires += dst_gc_timer_inc) > DST_GC_MAX)
-		dst_gc_timer_expires = DST_GC_MAX;
-	dst_gc_timer_inc += DST_GC_INC;
+	if (!work_performed) {
+		if ((dst_gc_timer_expires += dst_gc_timer_inc) > DST_GC_MAX)
+			dst_gc_timer_expires = DST_GC_MAX;
+		dst_gc_timer_inc += DST_GC_INC;
+	} else {
+		dst_gc_timer_inc = DST_GC_INC;
+		dst_gc_timer_expires = DST_GC_MIN;
+	}
 	dst_gc_timer.expires = jiffies + dst_gc_timer_expires;
 #if RT_CACHE_DEBUG >= 2
 	printk("dst_total: %d/%d %ld\n",
diff -urN linux-2.6.13-rc4/net/ipv4/ip_gre.c linux-2.6.13-rc5/net/ipv4/ip_gre.c
--- linux-2.6.13-rc4/net/ipv4/ip_gre.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/net/ipv4/ip_gre.c	2005-08-01 22:29:13.222705071 -0700
@@ -290,7 +290,6 @@
 
 	dev_hold(dev);
 	ipgre_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -1277,12 +1276,28 @@
 	goto out;
 }
 
-static void ipgre_fini(void)
+static void __exit ipgre_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 0; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
+static void __exit ipgre_fini(void)
 {
 	if (inet_del_protocol(&ipgre_protocol, IPPROTO_GRE) < 0)
 		printk(KERN_INFO "ipgre close: can't remove protocol\n");
 
-	unregister_netdev(ipgre_fb_tunnel_dev);
+	rtnl_lock();
+	ipgre_destroy_tunnels();
+	rtnl_unlock();
 }
 
 module_init(ipgre_init);
diff -urN linux-2.6.13-rc4/net/ipv4/ipip.c linux-2.6.13-rc5/net/ipv4/ipip.c
--- linux-2.6.13-rc4/net/ipv4/ipip.c	2005-08-01 22:29:05.985386982 -0700
+++ linux-2.6.13-rc5/net/ipv4/ipip.c	2005-08-01 22:29:13.225705203 -0700
@@ -255,7 +255,6 @@
 
 	dev_hold(dev);
 	ipip_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -920,12 +919,29 @@
 	goto out;
 }
 
+static void __exit ipip_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 1; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
 static void __exit ipip_fini(void)
 {
 	if (ipip_unregister() < 0)
 		printk(KERN_INFO "ipip close: can't deregister tunnel\n");
 
-	unregister_netdev(ipip_fb_tunnel_dev);
+	rtnl_lock();
+	ipip_destroy_tunnels();
+	unregister_netdevice(ipip_fb_tunnel_dev);
+	rtnl_unlock();
 }
 
 module_init(ipip_init);
diff -urN linux-2.6.13-rc4/net/ipv4/ipmr.c linux-2.6.13-rc5/net/ipv4/ipmr.c
--- linux-2.6.13-rc4/net/ipv4/ipmr.c	2005-08-01 22:29:05.986387026 -0700
+++ linux-2.6.13-rc5/net/ipv4/ipmr.c	2005-08-01 22:29:13.226705247 -0700
@@ -362,7 +362,7 @@
 
 /* Fill oifs list. It is called under write locked mrt_lock. */
 
-static void ipmr_update_threshoulds(struct mfc_cache *cache, unsigned char *ttls)
+static void ipmr_update_thresholds(struct mfc_cache *cache, unsigned char *ttls)
 {
 	int vifi;
 
@@ -727,7 +727,7 @@
 	if (c != NULL) {
 		write_lock_bh(&mrt_lock);
 		c->mfc_parent = mfc->mfcc_parent;
-		ipmr_update_threshoulds(c, mfc->mfcc_ttls);
+		ipmr_update_thresholds(c, mfc->mfcc_ttls);
 		if (!mrtsock)
 			c->mfc_flags |= MFC_STATIC;
 		write_unlock_bh(&mrt_lock);
@@ -744,7 +744,7 @@
 	c->mfc_origin=mfc->mfcc_origin.s_addr;
 	c->mfc_mcastgrp=mfc->mfcc_mcastgrp.s_addr;
 	c->mfc_parent=mfc->mfcc_parent;
-	ipmr_update_threshoulds(c, mfc->mfcc_ttls);
+	ipmr_update_thresholds(c, mfc->mfcc_ttls);
 	if (!mrtsock)
 		c->mfc_flags |= MFC_STATIC;
 
diff -urN linux-2.6.13-rc4/net/ipv4/netfilter/ip_conntrack_core.c linux-2.6.13-rc5/net/ipv4/netfilter/ip_conntrack_core.c
--- linux-2.6.13-rc4/net/ipv4/netfilter/ip_conntrack_core.c	2005-08-01 22:29:05.992387290 -0700
+++ linux-2.6.13-rc5/net/ipv4/netfilter/ip_conntrack_core.c	2005-08-01 22:29:13.232705511 -0700
@@ -513,6 +513,11 @@
 #ifdef CONFIG_IP_NF_CONNTRACK_MARK
 		conntrack->mark = exp->master->mark;
 #endif
+#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
+    defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
+		/* this is ugly, but there is no other place where to put it */
+		conntrack->nat.masq_index = exp->master->nat.masq_index;
+#endif
 		nf_conntrack_get(&conntrack->master->ct_general);
 		CONNTRACK_STAT_INC(expect_new);
 	} else {
diff -urN linux-2.6.13-rc4/net/ipv6/sit.c linux-2.6.13-rc5/net/ipv6/sit.c
--- linux-2.6.13-rc4/net/ipv6/sit.c	2005-06-17 12:48:29.000000000 -0700
+++ linux-2.6.13-rc5/net/ipv6/sit.c	2005-08-01 22:29:13.280707621 -0700
@@ -195,7 +195,6 @@
 	dev_hold(dev);
 
 	ipip6_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -794,10 +793,28 @@
 	.err_handler	=	ipip6_err,
 };
 
+static void __exit sit_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 1; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
 void __exit sit_cleanup(void)
 {
 	inet_del_protocol(&sit_protocol, IPPROTO_IPV6);
-	unregister_netdev(ipip6_fb_tunnel_dev);
+
+	rtnl_lock();
+	sit_destroy_tunnels();
+	unregister_netdevice(ipip6_fb_tunnel_dev);
+	rtnl_unlock();
 }
 
 int __init sit_init(void)
diff -urN linux-2.6.13-rc4/security/selinux/hooks.c linux-2.6.13-rc5/security/selinux/hooks.c
--- linux-2.6.13-rc4/security/selinux/hooks.c	2005-08-01 22:29:06.109392433 -0700
+++ linux-2.6.13-rc5/security/selinux/hooks.c	2005-08-01 22:29:13.354710873 -0700
@@ -3126,12 +3126,12 @@
 
 		if (sk->sk_family == PF_INET) {
 			addr4 = (struct sockaddr_in *)address;
-			if (addrlen != sizeof(struct sockaddr_in))
+			if (addrlen < sizeof(struct sockaddr_in))
 				return -EINVAL;
 			snum = ntohs(addr4->sin_port);
 		} else {
 			addr6 = (struct sockaddr_in6 *)address;
-			if (addrlen != sizeof(struct sockaddr_in6))
+			if (addrlen < SIN6_LEN_RFC2133)
 				return -EINVAL;
 			snum = ntohs(addr6->sin6_port);
 		}
diff -urN linux-2.6.13-rc4/sound/pci/intel8x0.c linux-2.6.13-rc5/sound/pci/intel8x0.c
--- linux-2.6.13-rc4/sound/pci/intel8x0.c	2005-08-01 22:29:06.238398103 -0700
+++ linux-2.6.13-rc5/sound/pci/intel8x0.c	2005-08-01 22:29:13.487716719 -0700
@@ -2376,6 +2376,9 @@
 			snd_ac97_suspend(chip->ac97[i]);
 	if (chip->device_type == DEVICE_INTEL_ICH4)
 		chip->sdm_saved = igetbyte(chip, ICHREG(SDM));
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, (void *)chip);
 	pci_disable_device(chip->pci);
 	return 0;
 }
@@ -2387,7 +2390,9 @@
 
 	pci_enable_device(chip->pci);
 	pci_set_master(chip->pci);
-	snd_intel8x0_chip_init(chip, 0);
+	request_irq(chip->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip);
+	synchronize_irq(chip->irq);
+	snd_intel8x0_chip_init(chip, 1);
 
 	/* re-initialize mixer stuff */
 	if (chip->device_type == DEVICE_INTEL_ICH4) {