commit 3f2ecb86cb909da0b9157fd2952ad79924cbe5ae Author: Greg Kroah-Hartman Date: Fri Dec 11 13:39:07 2020 +0100 Linux 4.14.212 Tested-by: Jon Hunter Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Link: https://lore.kernel.org/r/20201210142602.099683598@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 6e1bed40c8a3e8b93245bca9c60528fdd03f3951 Author: Masami Hiramatsu Date: Thu Dec 3 13:50:37 2020 +0900 x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook . [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu Signed-off-by: Borislav Petkov Reviewed-by: Srikar Dronamraju Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2 [sudip: adjust context, use old insn.h] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit bdc890dfb093fb24b0c92d2a693a184594c52cd4 Author: Luo Meng Date: Tue Nov 24 17:45:23 2020 -0800 Input: i8042 - fix error return code in i8042_setup_aux() commit 855b69857830f8d918d715014f05e59a3f7491a0 upstream. Fix to return a negative error code from the error handling case instead of 0 in function i8042_setup_aux(), as done elsewhere in this function. Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe") Reported-by: Hulk Robot Signed-off-by: Luo Meng Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 083c1c7f1333a794ddf1228edc9dbbdc129edb8d Author: Zhihao Cheng Date: Mon Nov 16 22:10:58 2020 +0800 i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc() commit e9acf0298c664f825e6f1158f2a97341bf9e03ca upstream. Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot Signed-off-by: Zhihao Cheng Reviewed-by: Bjorn Andersson Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 03c271625a3bc20b80d18c4e28e3eb0d1e662743 Author: Bob Peterson Date: Tue Nov 24 10:44:36 2020 -0500 gfs2: check for empty rgrp tree in gfs2_ri_update commit 778721510e84209f78e31e2ccb296ae36d623f5e upstream. If gfs2 tries to mount a (corrupt) file system that has no resource groups it still tries to set preferences on the first one, which causes a kernel null pointer dereference. This patch adds a check to function gfs2_ri_update so this condition is detected and reported back as an error. Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com Signed-off-by: Bob Peterson Signed-off-by: Andreas Gruenbacher Signed-off-by: Greg Kroah-Hartman commit 76dac5d2cb099713db10330b621bc8c97f74981e Author: Steven Rostedt (VMware) Date: Fri Dec 4 16:36:16 2020 -0500 tracing: Fix userstacktrace option for instances commit bcee5278958802b40ee8b26679155a6d9231783e upstream. When the instances were able to use their own options, the userstacktrace option was left hardcoded for the top level. This made the instance userstacktrace option bascially into a nop, and will confuse users that set it, but nothing happens (I was confused when it happened to me!) Cc: stable@vger.kernel.org Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 2ed216dbbe0a73147bdb90176fabc734db93703a Author: Peter Ujfalusi Date: Sun Dec 6 13:39:04 2020 +0100 spi: bcm2835: Release the DMA channel if probe fails after dma_init [ Upstream commit 666224b43b4bd4612ce3b758c038f9bc5c5e3fcb ] The DMA channel was not released if either devm_request_irq() or devm_spi_register_controller() failed. Signed-off-by: Peter Ujfalusi Reviewed-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/20191212135550.4634-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown [lukas: backport to 4.19-stable] Signed-off-by: Lukas Wunner Signed-off-by: Greg Kroah-Hartman commit e620a73d7ca7a719155c718897a09f46626b2bb6 Author: Lukas Wunner Date: Sun Dec 6 13:39:02 2020 +0100 spi: bcm2835: Fix use-after-free on unbind [ Upstream commit e1483ac030fb4c57734289742f1c1d38dca61e22 ] bcm2835_spi_remove() accesses the driver's private data after calling spi_unregister_controller() even though that function releases the last reference on the spi_controller and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound. Fixes: f8043872e796 ("spi: add driver for BCM2835") Reported-by: Sascha Hauer Reported-by: Florian Fainelli Signed-off-by: Lukas Wunner Cc: # v3.10+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: # v3.10+ Cc: Vladimir Oltean Tested-by: Florian Fainelli Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/ad66e0a0ad96feb848814842ecf5b6a4539ef35c.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 11f3e5f49c61ca36c948b51329d7286ace591d44 Author: Lukas Wunner Date: Sun Dec 6 13:39:01 2020 +0100 spi: bcm-qspi: Fix use-after-free on unbind commit 63c5395bb7a9777a33f0e7b5906f2c0170a23692 upstream bcm_qspi_remove() calls spi_unregister_master() even though bcm_qspi_probe() calls devm_spi_register_master(). The spi_master is therefore unregistered and freed twice on unbind. Moreover, since commit 0392727c261b ("spi: bcm-qspi: Handle clock probe deferral"), bcm_qspi_probe() leaks the spi_master allocation if the call to devm_clk_get_optional() fails. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound and also avoids the spi_master leak on probe. While at it, fix an ordering issue in bcm_qspi_remove() wherein spi_unregister_master() is called after uninitializing the hardware, disabling the clock and freeing an IRQ data structure. The correct order is to call spi_unregister_master() *before* those teardown steps because bus accesses may still be ongoing until that function returns. Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Lukas Wunner Cc: # v4.9+: 123456789abc: spi: Introduce device-managed SPI controller allocation Cc: # v4.9+ Cc: Kamal Dasu Acked-by: Florian Fainelli Tested-by: Florian Fainelli Link: https://lore.kernel.org/r/5e31a9a59fd1c0d0b795b2fe219f25e5ee855f9d.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 8c45a1c6c951bbe7f95db78fcab46f7337364468 Author: Lukas Wunner Date: Sun Dec 6 13:39:00 2020 +0100 spi: Introduce device-managed SPI controller allocation [ Upstream commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 ] SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 6bd835d16072a1a9baead39648c18bd6495a6e7c Author: Suravee Suthikulpanit Date: Mon Dec 7 03:19:20 2020 -0600 iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs commit 4165bf015ba9454f45beaad621d16c516d5c5afe upstream. According to the AMD IOMMU spec, the commit 73db2fc595f3 ("iommu/amd: Increase interrupt remapping table limit to 512 entries") also requires the interrupt table length (IntTabLen) to be set to 9 (power of 2) in the device table mapping entry (DTE). Fixes: 73db2fc595f3 ("iommu/amd: Increase interrupt remapping table limit to 512 entries") Reported-by: Jerry Snitselaar Signed-off-by: Suravee Suthikulpanit Reviewed-by: Jerry Snitselaar Link: https://lore.kernel.org/r/20201207091920.3052-1-suravee.suthikulpanit@amd.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit bccd77063e971a006164968873f4c2918b7188e6 Author: Samuel Thibault Date: Sun Nov 29 20:35:23 2020 +0100 speakup: Reject setting the speakup line discipline outside of speakup commit f0992098cadb4c9c6a00703b66cafe604e178fea upstream. Speakup exposing a line discipline allows userland to try to use it, while it is deemed to be useless, and thus uselessly exposes potential bugs. One of them is simply that in such a case if the line sends data, spk_ttyio_receive_buf2 is called and crashes since spk_ttyio_synth is NULL. This change restricts the use of the speakup line discipline to speakup drivers, thus avoiding such kind of issues altogether. Cc: stable@vger.kernel.org Reported-by: Shisong Qin Signed-off-by: Samuel Thibault Tested-by: Shisong Qin Link: https://lore.kernel.org/r/20201129193523.hm3f6n5xrn6fiyyc@function Signed-off-by: Greg Kroah-Hartman commit 9b77be65d82958ebbb7cfe60dbbda6165fe9b3f4 Author: Christian Eggers Date: Fri Oct 9 13:03:19 2020 +0200 i2c: imx: Check for I2SR_IAL after every byte commit 1de67a3dee7a279ebe4d892b359fe3696938ec15 upstream. Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 693b198d476add6f9cae22907f11c90f5933f6d0 Author: Christian Eggers Date: Fri Oct 9 13:03:18 2020 +0200 i2c: imx: Fix reset of I2SR_IAL flag commit 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d upstream. According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 95924989190d3db24f15a21f82d426923bcb4364 Author: Qian Cai Date: Sat Dec 5 22:14:55 2020 -0800 mm/swapfile: do not sleep with a spin lock held commit b11a76b37a5aa7b07c3e3eeeaae20b25475bddd3 upstream. We can't call kvfree() with a spin lock held, so defer it. Fixes a might_sleep() runtime warning. Fixes: 873d7bcfd066 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation") Signed-off-by: Qian Cai Signed-off-by: Andrew Morton Reviewed-by: Andrew Morton Cc: Hugh Dickins Cc: Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit fe0119a8577927733a90c8dde48ee6b4af0709be Author: Paulo Alcantara Date: Sat Nov 28 16:54:02 2020 -0300 cifs: fix potential use-after-free in cifs_echo_request() commit 212253367dc7b49ed3fc194ce71b0992eacaecf2 upstream. This patch fixes a potential use-after-free bug in cifs_echo_request(). For instance, thread 1 -------- cifs_demultiplex_thread() clean_demultiplex_info() kfree(server) thread 2 (workqueue) -------- apic_timer_interrupt() smp_apic_timer_interrupt() irq_exit() __do_softirq() run_timer_softirq() call_timer_fn() cifs_echo_request() <- use-after-free in server ptr Signed-off-by: Paulo Alcantara (SUSE) CC: Stable Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 4d5b218caae0dbddb857792efdc12c08a79f64e6 Author: Naveen N. Rao Date: Thu Nov 26 23:38:38 2020 +0530 ftrace: Fix updating FTRACE_FL_TRAMP commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream. On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 406ef9aa3777ac083f19b51ace3658d807d53fe7 Author: Takashi Iwai Date: Fri Nov 27 15:11:03 2020 +0100 ALSA: hda/generic: Add option to enforce preferred_dacs pairs commit 242d990c158d5b1dabd166516e21992baef5f26a upstream. The generic parser accepts the preferred_dacs[] pairs as a hint for assigning a DAC to each pin, but this hint doesn't work always effectively. Currently it's merely a secondary choice after the trial with the path index failed. This made sometimes it difficult to assign DACs without mimicking the connection list and/or the badness table. This patch adds a new flag, obey_preferred_dacs, that changes the behavior of the parser. As its name stands, the parser obeys the given preferred_dacs[] pairs by skipping the path index matching and giving a high penalty if no DAC is assigned by the pairs. This mode will help for assigning the fixed DACs forcibly from the codec driver. Cc: Link: https://lore.kernel.org/r/20201127141104.11041-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 427d52697c4086efd6ad9975864be6d7cb107cf1 Author: Kailang Yang Date: Fri Nov 27 14:39:23 2020 +0800 ALSA: hda/realtek - Add new codec supported for ALC897 commit e5782a5d5054bf1e03cb7fbd87035037c2a22698 upstream. Enable new codec supported for ALC897. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/3b00520f304842aab8291eb8d9191bd8@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8deb3d9018400fab0a7401a910d3341053f5ec82 Author: Jann Horn Date: Thu Dec 3 02:25:05 2020 +0100 tty: Fix ->session locking commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream. Currently, locking of ->session is very inconsistent; most places protect it using the legacy tty mutex, but disassociate_ctty(), __do_SAK(), tiocspgrp() and tiocgsid() don't. Two of the writers hold the ctrl_lock (because they already need it for ->pgrp), but __proc_set_tty() doesn't do that yet. On a PREEMPT=y system, an unprivileged user can theoretically abuse this broken locking to read 4 bytes of freed memory via TIOCGSID if tiocgsid() is preempted long enough at the right point. (Other things might also go wrong, especially if root-only ioctls are involved; I'm not sure about that.) Change the locking on ->session such that: - tty_lock() is held by all writers: By making disassociate_ctty() hold it. This should be fine because the same lock can already be taken through the call to tty_vhangup_session(). The tricky part is that we need to shorten the area covered by siglock to be able to take tty_lock() without ugly retry logic; as far as I can tell, this should be fine, since nothing in the signal_struct is touched in the `if (tty)` branch. - ctrl_lock is held by all writers: By changing __proc_set_tty() to hold the lock a little longer. - All readers that aren't holding tty_lock() hold ctrl_lock: By adding locking to tiocgsid() and __do_SAK(), and expanding the area covered by ctrl_lock in tiocspgrp(). Cc: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman commit 882e038d2cd276163a8fc7bbeffda59ae0924471 Author: Jann Horn Date: Thu Dec 3 02:25:04 2020 +0100 tty: Fix ->pgrp locking in tiocspgrp() commit 54ffccbf053b5b6ca4f6e45094b942fab92a25fc upstream. tiocspgrp() takes two tty_struct pointers: One to the tty that userspace passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`). These pointers are different when ioctl() is called with a master fd. To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock. This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on both sides of a PTY pair to corrupt the refcount of `struct pid`, leading to use-after-free errors. Fixes: 47f86834bbd4 ("redo locking of tty->pgrp") CC: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman commit 490c5c712402e6d194179437da863f9c75ade63f Author: Bjørn Mork Date: Tue Dec 1 11:03:18 2020 +0100 USB: serial: option: fix Quectel BG96 matching commit c98fff7332dbd6e028969f8c2bda3d7bc7a024d8 upstream. This is a partial revert of commit 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") The Quectel BG96 is different from most other modern Quectel modems, having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff class/subclass/protocol. Including it in the change to accommodate dynamic function mapping was incorrect. Revert to interface number matching for the BG96, assuming static layout of the RMNET function on interface 4. This restores support for the serial functions on interfaces 2 and 3. Full lsusb output for the BG96: Bus 002 Device 003: ID 2c7c:0296 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2c7c idProduct 0x0296 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 d1098243 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 145 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 254 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: Sebastian Sjoholm Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 3f517f819096b36bc49e77bd8f7aee7fd4ac943a Author: Giacinto Cifelli Date: Wed Nov 25 15:53:04 2020 +0100 USB: serial: option: add support for Thales Cinterion EXS82 commit 6d6556c04ebaeaf4e7fa8b791c97e2a7c41b38a3 upstream. There is a single option port in this modem, and it is used as debug port. lsusb -v for this device: Bus 001 Device 002: ID 1e2d:006c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006c bcdDevice 0.00 iManufacturer 4 iProduct 3 iSerial 5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 243 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 2 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 1 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 2 CDC Union: bMasterInterface 1 bSlaveInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 3 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 4 CDC Union: bMasterInterface 3 bSlaveInterface 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 5 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 5 bSlaveInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Giacinto Cifelli Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit bc435a0dfb3c81b18ed8d9d4cfab42597416750e Author: Vincent Palatin Date: Fri Nov 20 10:28:28 2020 +0100 USB: serial: option: add Fibocom NL668 variants commit 5e4d659b10fde14403adb2e215df4a3168fe8465 upstream. Update the USB serial option driver support for the Fibocom NL668 Cat.4 LTE modules as there are actually several different variants. Got clarifications from Fibocom, there are distinct products: - VID:PID 1508:1001, NL668 for IOT (no MBIM interface) - VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas and Europe. usb-devices output for the laptop M.2 cards: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a0 Rev=03.18 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom NL652-EU Modem S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Vincent Palatin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 058e0da58be02b56248b7bf2ebe6f3b32fd44bf6 Author: Johan Hovold Date: Thu Dec 3 10:11:59 2020 +0100 USB: serial: ch341: sort device-id entries commit bf193bfc12dbc3754fc8a6e0e1e3702f1af2f772 upstream. Keep the device-id entries sorted to make it easier to add new ones in the right spot. Reviewed-by: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e9e0515b9ec9a2d5efca21573a89c9f7880db3b1 Author: Jan-Niklas Burfeind Date: Thu Dec 3 04:03:59 2020 +0100 USB: serial: ch341: add new Product ID for CH341A commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63 upstream. Add PID for CH340 that's found on a ch341 based Programmer made by keeyees. The specific device that contains the serial converter is described here: http://www.keeyees.com/a/Products/ej/36.html The driver works flawlessly as soon as the new PID (0x5512) is added to it. Signed-off-by: Jan-Niklas Burfeind Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit a345fe6935b1d47afd8d238578c156d349942588 Author: Johan Hovold Date: Fri Dec 4 09:55:19 2020 +0100 USB: serial: kl5kusb105: fix memleak on open commit 3f203f057edfcf6bd02c6b942799262bfcf31f73 upstream. Fix memory leak of control-message transfer buffer on successful open(). Fixes: 6774d5f53271 ("USB: serial: kl5kusb105: fix open error path") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 84f747ade2fbbe5ab5cc8ff6a0cbad434cb2c553 Author: Vamsi Krishna Samavedam Date: Mon Nov 30 12:34:53 2020 -0800 usb: gadget: f_fs: Use local copy of descriptors for userspace copy commit a4b98a7512f18534ce33a7e98e49115af59ffa00 upstream. The function may be unbound causing the ffs_ep and its descriptors to be freed while userspace is in the middle of an ioctl requesting the same descriptors. Avoid dangling pointer reference by first making a local copy of desctiptors before releasing the spinlock. Fixes: c559a3534109 ("usb: gadget: f_fs: add ioctl returning ep descriptor") Reviewed-by: Peter Chen Signed-off-by: Vamsi Krishna Samavedam Signed-off-by: Jack Pham Cc: stable Link: https://lore.kernel.org/r/20201130203453.28154-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman commit 502bbb8480c38ae6caa4f890b98db3b2a4ae919a Author: Toke Høiland-Jørgensen Date: Tue Jul 7 13:03:25 2020 +0200 vlan: consolidate VLAN parsing code and limit max parsing depth [ Upstream commit 469aceddfa3ed16e17ee30533fae45e90f62efd8 ] Toshiaki pointed out that we now have two very similar functions to extract the L3 protocol number in the presence of VLAN tags. And Daniel pointed out that the unbounded parsing loop makes it possible for maliciously crafted packets to loop through potentially hundreds of tags. Fix both of these issues by consolidating the two parsing functions and limiting the VLAN tag parsing to a max depth of 8 tags. As part of this, switch over __vlan_get_protocol() to use skb_header_pointer() instead of pskb_may_pull(), to avoid the possible side effects of the latter and keep the skb pointer 'const' through all the parsing functions. v2: - Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT) Reported-by: Toshiaki Makita Reported-by: Daniel Borkmann Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs") Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 272b1fcf1cab41fc46c5affb61cb74e4786bcec1 Author: Hans de Goede Date: Sat Jun 6 11:31:50 2020 +0200 pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH) commit 156abe2961601d60a8c2a60c6dc8dd6ce7adcdaf upstream The pins on the Bay Trail SoC have separate input-buffer and output-buffer enable bits and a read of the level bit of the value register will always return the value from the input-buffer. The BIOS of a device may configure a pin in output-only mode, only enabling the output buffer, and write 1 to the level bit to drive the pin high. This 1 written to the level bit will be stored inside the data-latch of the output buffer. But a subsequent read of the value register will return 0 for the level bit because the input-buffer is disabled. This causes a read-modify-write as done by byt_gpio_set_direction() to write 0 to the level bit, driving the pin low! Before this commit byt_gpio_direction_output() relied on pinctrl_gpio_direction_output() to set the direction, followed by a call to byt_gpio_set() to apply the selected value. This causes the pin to go low between the pinctrl_gpio_direction_output() and byt_gpio_set() calls. Change byt_gpio_direction_output() to directly make the register modifications itself instead. Replacing the 2 subsequent writes to the value register with a single write. Note that the pinctrl code does not keep track internally of the direction, so not going through pinctrl_gpio_direction_output() is not an issue. This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is already on at boot (no external monitor connected), then the i915 driver does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The temporarily going low of that GPIO was causing the panel to reset itself after which it would not show an image until it was turned off and back on again (until a full modeset was done on it). This commit fixes this. This commit also updates the byt_gpio_direction_input() to use direct register accesses instead of going through pinctrl_gpio_direction_input(), to keep it consistent with byt_gpio_direction_output(). Note for backporting, this commit depends on: commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output") Cc: stable@vger.kernel.org Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations") Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko [sudip: use byt_gpio and vg->pdev->dev for dev_info()] Signed-off-by: Sudip Mukherjee Signed-off-by: Sasha Levin commit 857ce4a6ed2db58627db8b8ae48e4cb9a346b4c7 Author: Hans de Goede Date: Wed Jan 1 15:52:43 2020 +0100 pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output commit e2b74419e5cc7cfc58f3e785849f73f8fa0af5b3 upstream Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Cherry Trail device the interrupt pin is listed as a GpioInt ACPI resource so we can do this without problems as long as we release the IRQ before changing the pin to output mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, but this triggers the WARN in byt_gpio_set_direction-s output path because direct-irq support is enabled on the pin. This commit replaces the WARN call with a dev_info_once call, fixing a bunch of WARN splats in dmesg on each suspend/resume cycle. Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Sudip Mukherjee Signed-off-by: Sasha Levin