diff -Nur modutils-2.4.25/ChangeLog modutils-2.4.26/ChangeLog --- modutils-2.4.25/ChangeLog 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/ChangeLog 2003-10-28 22:20:46.000000000 +1100 @@ -1,3 +1,27 @@ +2003-10-28 Keith Owens + + modutils 2.4.26 + + * Ignore SHT_MIPS_DWARF sections. Alvaro Martinez Echevarria. + * Add -malign-double to cflags for 64 bit builds. + * Fix zlib linking problems. Maciej W. Rozycki. + * Remove hard coded limits on length of modules.conf lines. + * Alias updates. Red Hat. + * Makefile fix for parallel build using bison. Andreas Haumer. + * Document difference between patterns and modules in modprobe. + Frank Murphy. + * Suppress module not found message on modprobe -q. Frank Murphy. + * Add module name to some messages. Red Hat. + * Add amd64 support. i386 now defaults to combined 32/64 bit. + Arnd Bergmann. + * Older glibc versions had a wrong name for R_390_GOTOFF32. + Arnd Bergmann. + * Run known directories in the correct historical order. Red Hat. + * Upgrade config.sub, config.guess to glibc 2.3.2. + * Add sh64 support. Benedict Gaster. + * Only build sys_oim.o when COMPAT_2_0 is set, it breaks with ia64 and + recent glibc. + 2003-03-29 Keith Owens modutils 2.4.25 @@ -41,8 +65,8 @@ * Check for special characters in module name (from SuSe). * Check x86_64 for -mcmodel=kernel (from SuSe). * Add alias for osst (from SuSe). - * Check for illegal mixture of gcc 2 and 3 (from RedHat). - * Build libmodutils.a (from RedHat). + * Check for illegal mixture of gcc 2 and 3 (from Red Hat). + * Build libmodutils.a (from Red Hat). * Selectively add aliases, above, below, prune entries (from Mandrake). * Add MODUTILS_MACROS (from Mandrake). * Remove more warnings. @@ -190,7 +214,7 @@ * Remove duplicate patch for sh, Tom Rini. * Handle empty multi-line modinfo fields, reported by Bill Nottingham. * Add obj_find_relsym(), standard method of finding relocation symbols. - * Default char-major-4 (tty) to off for s390. S390 group via Redhat. + * Default char-major-4 (tty) to off for s390. S390 group via Red Hat. * Support GPL only exported symbols (EXPORT_SYMBOL_GPL). 2001-09-25 Keith Owens @@ -225,9 +249,9 @@ * Better error checking in makefiles. Reported by Nico Schottelius. * S390 support from Ulrich Weigand. Includes Debian #107308. * Add s390 iucv aliases. Add binfmt-0000 off. Fix modprobe man page - typo. Redhat. + typo. Red Hat. * Non-zero return code for depmod with unresolved symbols. Original by - Redhat, reworked by me. + Red Hat, reworked by me. * Add alias tunl0 ipip, requested by Pekka Savola. * Aliases for parallel port devices. Tim Waugh. @@ -275,7 +299,7 @@ * putenv() strings must be copied first. * Not everybody has Elf64_Xword. * Add stdlib.h to some files for glibc 2.2. - * Redhat modutils-2.4.0-alias.patch. + * Red Hat modutils-2.4.0-alias.patch. * Out by one error in alloca. Spotted by Yann Droneaud. 2001-01-23 Keith Owens @@ -315,7 +339,7 @@ modutils 2.3.23 * Correct error path in rmmod.c. Andrew Morton. - * Include latest Redhat alias list. Bill Nottingham. + * Include latest Red Hat alias list. Bill Nottingham. * hppa and hppa64 support. Richard Hirst. * Rework Makefiles for common 32/64 code. Keith Owens. * Add parportmap. Adam J Richter, Keith Owens. @@ -333,7 +357,7 @@ * options statement was confused by /dev/snd and snd. Wolfgang Oertl. * Report failing module in a dependency list. Original patch by Pavel Roskin, reworked by Keith Owens. - * IA64 unwind fix. Richard Henderson via Redhat. + * IA64 unwind fix. Richard Henderson via Red Hat. * modprobe -c used incorrect keywords for generated filenames. Reported by Gabor Z. Papp. * char-major-10-184 microcode. Tigran Aivazian. @@ -372,7 +396,7 @@ passing user data unchanged to a program running as root. * Add missing s/390 arch_finalize_section_address. Roger Luethi. * depmod -F supports strange sparc __export_priv_. Dave Miller. - * Sparc64 relocation patch. Redhat (not that they bothered to tell me). + * Sparc64 relocation patch. Red Hat (not that they bothered to tell me). * Sparc64 compile and link fixes. Me, with thanks to Dave Miller for making a machine available. @@ -466,9 +490,9 @@ modutils to run on 2.0.x kernels, if you want kerneld (died in 2.1.91) or if your libc does not have create_module(), query_module() etc. * IA64, s390 fixes. - * Redhat 486 patch. - * Redhat modprobe -k patch. - * Redhat kallsyms patch. + * Red Hat 486 patch. + * Red Hat modprobe -k patch. + * Red Hat kallsyms patch. * Add mtd directory, aliases from David Woodhouse. * Handle unaligned IA64 relocations. * Fix for IA64 modules with no cleanup routine, Mike Stephens. @@ -517,7 +541,7 @@ Update usage info. Tim Waugh * Derive genksyms prefix from well known symbol, automatically picks up unusual symbol prefixes. Suggested by Edouard G. Parmelan because - Redhat used "smp" instead of "smp_" :(. Different implementation by + Red Hat used "smp" instead of "smp_" :(. Different implementation by Keith Owens. * Add ide modules directory. Keith Owens. * Truncate alias loops. Pass alias result to probe[all]. Bug found and diff -Nur modutils-2.4.25/config.guess modutils-2.4.26/config.guess --- modutils-2.4.25/config.guess 2002-03-24 16:03:00.000000000 +1100 +++ modutils-2.4.26/config.guess 2003-10-28 22:20:46.000000000 +1100 @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2002-03-04' +timestamp='2003-06-06' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -88,30 +88,42 @@ exit 1 fi +trap 'exit 1' 1 2 15 -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. -# CC_FOR_BUILD -- compiler used by this script. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. -set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int dummy(){}" > $dummy.c ; - for c in cc gcc c89 ; do - ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; - if test $? = 0 ; then +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; - rm -f $dummy.c $dummy.o $dummy.rel ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac' +esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -142,6 +154,7 @@ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; @@ -167,7 +180,18 @@ ;; esac # The OS release - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. @@ -216,63 +240,47 @@ if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - cat <$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - eval $set_cc_for_build - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - 2-1307) - UNAME_MACHINE="alphaev68" - ;; - esac - fi - rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha\ *:Windows_NT*:*) @@ -313,6 +321,13 @@ NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; @@ -419,15 +434,20 @@ exit (-1); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy \ - && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; @@ -500,8 +520,7 @@ exit(0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 @@ -599,11 +618,21 @@ exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) @@ -637,8 +666,7 @@ exit (0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) @@ -696,15 +724,15 @@ CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; - CRAY*T3D:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; + *:UNICOS/mp:*:*) + echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` @@ -720,8 +748,19 @@ *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin @@ -732,14 +771,17 @@ i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; - x86:Interix*:3*) - echo i386-pc-interix3 + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix + echo i586-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin @@ -759,8 +801,11 @@ arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit 0 ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux + echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu @@ -771,19 +816,37 @@ #undef CPU #undef mips #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif - #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - rm -f $dummy.c - test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu @@ -845,7 +908,7 @@ ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; @@ -878,7 +941,6 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; @@ -896,6 +958,23 @@ # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -917,22 +996,19 @@ UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about @@ -956,9 +1032,15 @@ # "miniframe" echo m68010-convergent-sysv exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` @@ -975,9 +1057,6 @@ mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; @@ -1049,6 +1128,9 @@ SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; @@ -1056,20 +1138,24 @@ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} + case `uname -p` in + *86) UNAME_PROCESSOR=i686 ;; + powerpc) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) - if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 UNAME_MACHINE=pc - echo i386-${UNAME_MACHINE}-nto-qnx - else - echo `uname -p`-${UNAME_MACHINE}-nto-qnx fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; - NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) + NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) @@ -1092,11 +1178,6 @@ fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; @@ -1115,12 +1196,6 @@ *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1241,8 +1316,7 @@ } EOF -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 -rm -f $dummy.c $dummy +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. diff -Nur modutils-2.4.25/config.sub modutils-2.4.26/config.sub --- modutils-2.4.25/config.sub 2002-03-24 16:03:00.000000000 +1100 +++ modutils-2.4.26/config.sub 2003-10-27 13:54:45.000000000 +1100 @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2002-03-04' +timestamp='2003-06-06' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -118,7 +118,7 @@ # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) + nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -229,24 +229,36 @@ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | c4x | clipper \ - | d10v | d30v | dsp16xx \ - | fr30 \ + | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ + | ip2k \ | m32r | m68000 | m68k | m88k | mcore \ - | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el | mips64vr4300 \ - | mips64vr4300el | mips64vr5000 | mips64vr5000el \ - | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ - | mipsisa32 \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | msp430 \ | ns16k | ns32k \ | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic80 | tron \ @@ -281,34 +293,49 @@ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armv*-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | cydra-* \ - | d10v-* | d30v-* \ + | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | fx80-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* \ | m32r-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ - | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ - | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ - | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | msp430-* \ + | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ @@ -346,6 +373,9 @@ basic_machine=a29k-none os=-bsd ;; + amd64) + basic_machine=x86_64-pc + ;; amdahl) basic_machine=580-amdahl os=-sysv @@ -695,6 +725,10 @@ np1) basic_machine=np1-gould ;; + nv1) + basic_machine=nv1-cray + os=-unicosmp + ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -728,49 +762,55 @@ pbb) basic_machine=m68k-tti ;; - pc532 | pc532-*) + pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; - pentiumpro | p6 | 6x86 | athlon) + pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; - pentiumii | pentium2) + pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; + pentium4) + basic_machine=i786-pc + ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumii-* | pentium2-*) + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown - ;; + ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown - ;; + ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown - ;; + ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown - ;; + ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; @@ -801,6 +841,12 @@ basic_machine=a29k-amd os=-udi ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; sequent) basic_machine=i386-sequent ;; @@ -866,7 +912,7 @@ sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; - sv1) + sv1) basic_machine=sv1-cray os=-unicos ;; @@ -874,10 +920,6 @@ basic_machine=i386-sequent os=-dynix ;; - t3d) - basic_machine=alpha-cray - os=-unicos - ;; t3e) basic_machine=alphaev5-cray os=-unicos @@ -886,10 +928,22 @@ basic_machine=t90-cray os=-unicos ;; + tic4x | c4x*) + basic_machine=tic4x-unknown + os=-coff + ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; tx39) basic_machine=mipstx39-unknown ;; @@ -924,8 +978,8 @@ os=-vms ;; vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; + basic_machine=f301-fujitsu + ;; vxworks960) basic_machine=i960-wrs os=-vxworks @@ -946,11 +1000,7 @@ basic_machine=hppa1.1-winbond os=-proelf ;; - windows32) - basic_machine=i386-pc - os=-windows32-msvcrt - ;; - xps | xps100) + xps | xps100) basic_machine=xps100-honeywell ;; ymp) @@ -996,7 +1046,7 @@ we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh3eb | sh4eb) + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sh64) @@ -1005,7 +1055,7 @@ sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; - cydra) + cydra) basic_machine=cydra-cydrome ;; orion) @@ -1020,10 +1070,6 @@ pmac | pmac-mpw) basic_machine=powerpc-apple ;; - c4x*) - basic_machine=c4x-none - os=-coff - ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; @@ -1086,11 +1132,12 @@ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova*) + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1102,8 +1149,10 @@ ;; esac ;; + -nto-qnx*) + ;; -nto*) - os=-nto-qnx + os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ @@ -1155,7 +1204,7 @@ os=-rtmk-nova ;; -ns2 ) - os=-nextstep2 + os=-nextstep2 ;; -nsk*) os=-nsk @@ -1194,8 +1243,14 @@ -xenix) os=-xenix ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos ;; -none) ;; @@ -1232,7 +1287,7 @@ pdp10-*) os=-tops20 ;; - pdp11-*) + pdp11-*) os=-none ;; *-dec | vax-*) @@ -1325,19 +1380,19 @@ *-next) os=-nextstep3 ;; - *-gould) + *-gould) os=-sysv ;; - *-highlevel) + *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; - *-sgi) + *-sgi) os=-irix ;; - *-siemens) + *-siemens) os=-sysv4 ;; *-masscomp) @@ -1409,7 +1464,7 @@ -ptx*) vendor=sequent ;; - -vxsim* | -vxworks*) + -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) diff -Nur modutils-2.4.25/configure modutils-2.4.26/configure --- modutils-2.4.25/configure 2003-03-29 11:08:42.000000000 +1100 +++ modutils-2.4.26/configure 2003-10-28 13:10:19.000000000 +1100 @@ -1,84 +1,288 @@ #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# Generated by GNU Autoconf 2.57. # +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + -# Defaults: -ac_help= +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# ac_default_prefix=/usr/local -# Any additions from configure.in: +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="insmod/insmod.c" ac_default_prefix=/usr -ac_help="$ac_help - --enable-combined Create insmod and rmmod/modprobe/lsmod/ksyms/kallsyms - as one executable. Default is one combined - module, if you --disable-combined you can still - combine individual modules into insmod with - --enable-combined-X." -ac_help="$ac_help - --enable-combined-rmmod Create insmod and rmmod as one executable - (default)" -ac_help="$ac_help - --enable-combined-modprobe Create insmod and modprobe as one executable - (default)" -ac_help="$ac_help - --enable-combined-lsmod Create insmod and lsmod as one executable - (default)" -ac_help="$ac_help - --enable-combined-ksyms Create insmod and ksyms as one executable - (default)" -ac_help="$ac_help - --enable-combined-kallsyms Create insmod and kallsyms as one executable - (default)" -ac_help="$ac_help - --disable-compat-2-0 Do not create utilities that can run on a Linux - 2.0 system (default)" -ac_help="$ac_help - --disable-kerneld Do not create kerneld binary (default)" -ac_help="$ac_help - --disable-insmod-static Do not create insmod.static binary (default)" -ac_help="$ac_help - --enable-common-sparc Make all the utilities work on both sparc32 and - sparc64 as one executable (default on sparc is - yes, default on other architectures is no)" -ac_help="$ac_help - --enable-common-hppa Make one executable handle 32 and 64 bit kernel - modules (default on hppa is yes, default on other - architectures is no)" -ac_help="$ac_help - --enable-common-ppc Make one executable handle 32 and 64 bit kernel - modules (default on ppc is yes, default on other - architectures is no)" -ac_help="$ac_help - --enable-common-s390 Make one executable handle 32 and 64 bit kernel - modules (default on s390 is yes, default on other - architectures is no)" -ac_help="$ac_help - --enable-strip Strip binaries during install. Default is no - on IA64 (ski does not like stripped binaries), - yes on other architectures" -ac_help="$ac_help - --disable-zlib Do not handle gzipped objects (default)" -ac_help="$ac_help - --disable-use-syscall Do not use _syscall(), use libc functions instead. - Default is disable the use of syscall but only if - libc supports query_module." -ac_help="$ac_help - --enable-root-check Check that modules are owned by root before - loading (default)" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os COMBINE_rmmod COMBINE_modprobe COMBINE_lsmod COMBINE_ksyms COMBINE_kallsyms COMPAT_2_0 kerneld_SUBDIR insmod_static COMMON_sparc COMMON_hppa COMMON_ppc COMMON_s390 COMMON_i386 ARCH STRIP CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT USE_SYSCALL RANLIB ac_ct_RANLIB LN_S INSTALL_LOCAL BUILDCC BUILDCFLAGS AR PARSERCFLAGS MKDIR TAINT_URL HAVE_WORDEXP HAVE_GLOB ZLIB ZLIB_STATIC LIBOBJS LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. +ac_init_help= +ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. -build=NONE -cache_file=./config.cache +cache_file=/dev/null exec_prefix=NONE -host=NONE no_create= -nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE @@ -87,10 +291,15 @@ silent= site= srcdir= -target=NONE verbose= x_includes=NONE x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' @@ -104,17 +313,9 @@ infodir='${prefix}/info' mandir='${prefix}/man' -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" @@ -122,59 +323,59 @@ continue fi - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. - case "$ac_option" in + case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; + bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) - ac_prev=build ;; + ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; + build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) - datadir="$ac_optarg" ;; + datadir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "enable_${ac_feature}='$ac_optarg'" ;; + eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -183,95 +384,47 @@ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; + exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -host | --host | --hos | --ho) - ac_prev=host ;; + ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; + host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; + includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; + infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; + libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; + libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ @@ -280,19 +433,19 @@ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; + localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; + mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -306,26 +459,26 @@ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; + oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; + prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; + program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; + program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ @@ -342,7 +495,7 @@ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; + program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) @@ -352,7 +505,7 @@ ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; + sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ @@ -363,58 +516,57 @@ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; + sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; + site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; + srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; + sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; + ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; + target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "with_${ac_package}='$ac_optarg'" ;; + eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. @@ -425,99 +577,110 @@ ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; + x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; + x_libraries=$ac_optarg ;; - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi -exec 5>./config.log -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; esac done -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=insmod/insmod.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -527,13 +690,474 @@ fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-combined Create insmod and rmmod/modprobe/lsmod/ksyms/kallsyms + as one executable. Default is one combined + module, if you --disable-combined you can still + combine individual modules into insmod with + --enable-combined-X. + --enable-combined-rmmod Create insmod and rmmod as one executable + (default) + --enable-combined-modprobe Create insmod and modprobe as one executable + (default) + --enable-combined-lsmod Create insmod and lsmod as one executable + (default) + --enable-combined-ksyms Create insmod and ksyms as one executable + (default) + --enable-combined-kallsyms Create insmod and kallsyms as one executable + (default) + --disable-compat-2-0 Do not create utilities that can run on a Linux + 2.0 system (default) + --disable-kerneld Do not create kerneld binary (default) + --disable-insmod-static Do not create insmod.static binary (default) + --enable-common-sparc Make all the utilities work on both sparc32 and + sparc64 as one executable (default on sparc is + yes, default on other architectures is no) + --enable-common-hppa Make one executable handle 32 and 64 bit kernel + modules (default on hppa is yes, default on other + architectures is no) + --enable-common-ppc Make one executable handle 32 and 64 bit kernel + modules (default on ppc is yes, default on other + architectures is no) + --enable-common-s390 Make one executable handle 32 and 64 bit kernel + modules (default on s390 is yes, default on other + architectures is no) + --enable-common-i386 Make one executable handle 32 and 64 bit kernel + modules (default on i386 is yes, default on other + architectures is no) + --enable-strip Strip binaries during install. Default is no + on IA64 (ski does not like stripped binaries), + yes on other architectures + --disable-zlib Do not handle gzipped objects (default) + --disable-use-syscall Do not use _syscall(), use libc functions instead. + Default is disable the use of syscall but only if + libc supports query_module. + --enable-root-check Check that modules are owned by root before + loading (default) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --without-dynamic-zlib Link against static zlib (default) + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then @@ -544,59 +1168,123 @@ fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi else - echo "creating cache $cache_file" - > $cache_file + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Canonical system uses CC_FOR_BUILD while Linux may use BUILDCC -if test -z "$CC_FOR_BUILD"; then - CC_FOR_BUILD="$BUILDCC" -fi -# Ditto for HOSTCC for compatibility. -if test -z "$HOSTCC"; then - HOSTCC="$HOST_CC" -fi -if test -z "$CC_FOR_BUILD"; then - CC_FOR_BUILD="$HOSTCC" -fi -BUILDCC="$CC_FOR_BUILD" -export CC_FOR_BUILD -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + + + + + + + + + + + + + + + + +# Canonical system uses CC_FOR_BUILD while Linux may use BUILDCC +if test -z "$CC_FOR_BUILD"; then + CC_FOR_BUILD="$BUILDCC" +fi +# Ditto for HOSTCC for compatibility. +if test -z "$HOSTCC"; then + HOSTCC="$HOST_CC" +fi +if test -z "$CC_FOR_BUILD"; then + CC_FOR_BUILD="$HOSTCC" +fi +BUILDCC="$CC_FOR_BUILD" +export CC_FOR_BUILD + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -605,105 +1293,104 @@ ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -# Do some error checking and defaulting for the host and target type. -# The inputs are: -# configure --host=HOST --target=TARGET --build=BUILD NONOPT -# -# The rules are: -# 1. You are not allowed to specify --host, --target, and nonopt at the -# same time. -# 2. Host defaults to nonopt. -# 3. If nonopt is not specified, then host defaults to the current host, -# as determined by config.guess. -# 4. Target and build default to nonopt. -# 5. If nonopt is not specified, then target and build default to host. # The aliases save the names the user supplied, while $host etc. # will get canonicalized. -case $host---$target---$nonopt in -NONE---*---* | *---NONE---* | *---*---NONE) ;; -*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -esac - - -# Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:646: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:667: checking target system type" >&5 - -target_alias=$target -case "$target_alias" in -NONE) - case $nonopt in - NONE) target_alias=$host_alias ;; - *) target_alias=$nonopt ;; - esac ;; -esac - -target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$target" 1>&6 - -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:685: checking build system type" >&5 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - -test "$host_alias" != "$target_alias" && +test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- - # Handle target_cpu for compatibility. if test "$host_cpu" != "$target_cpu"; then host_cpu=$target_cpu @@ -713,6 +1400,7 @@ i?86) ARCH=i386 ;; arm*) ARCH=arm ;; mips*) ARCH=mips ;; + sh64) ARCH=sh64 ;; sh*) ARCH=sh ;; powerpc) ARCH=ppc ;; powerpc64) ARCH=ppc64 ;; @@ -731,8 +1419,7 @@ do eval COMBINE_$i="" done fi -fi - +fi; # Check whether --enable-combined-rmmod or --disable-combined-rmmod was given. if test "${enable_combined_rmmod+set}" = set; then @@ -742,8 +1429,7 @@ else COMBINE_rmmod="" fi -fi - +fi; # Check whether --enable-combined-modprobe or --disable-combined-modprobe was given. @@ -754,8 +1440,7 @@ else COMBINE_modprobe="" fi -fi - +fi; # Check whether --enable-combined-lsmod or --disable-combined-lsmod was given. @@ -766,8 +1451,7 @@ else COMBINE_lsmod="" fi -fi - +fi; # Check whether --enable-combined-ksyms or --disable-combined-ksyms was given. @@ -778,8 +1462,7 @@ else COMBINE_ksyms="" fi -fi - +fi; # Check whether --enable-combined-kallsyms or --disable-combined-kallsyms was given. @@ -790,20 +1473,24 @@ else COMBINE_kallsyms="" fi -fi - +fi; # Check whether --enable-compat-2-0 or --disable-compat-2-0 was given. if test "${enable_compat_2_0+set}" = set; then enableval="$enable_compat_2_0" if test "$enableval" = "yes"; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define COMPAT_2_0 1 -EOF +_ACEOF + COMPAT_2_0="y" +else + COMPAT_2_0="n" fi -fi +else + COMPAT_2_0="n" +fi; # Check whether --enable-kerneld or --disable-kerneld was given. @@ -813,8 +1500,7 @@ kerneld_SUBDIR=kerneld kerneld_Makefiles="kerneld/Makefile man_kerneld/Makefile" fi -fi - +fi; # Check whether --enable-insmod-static or --disable-insmod-static was given. @@ -827,8 +1513,7 @@ fi else insmod_static=no -fi - +fi; COMMON_sparc=yes @@ -840,8 +1525,7 @@ else COMMON_sparc=no fi -fi - +fi; case "$ARCH" in sparc64) if test "$COMMON_sparc" = "yes"; then ARCH="sparc"; fi ;; sparc*) ;; @@ -858,8 +1542,7 @@ else COMMON_hppa=no fi -fi - +fi; case "$ARCH" in hppa64) if test "$COMMON_hppa" = "yes"; then ARCH="hppa"; fi ;; hppa*) ;; @@ -876,8 +1559,7 @@ else COMMON_ppc=no fi -fi - +fi; case "$ARCH" in ppc64) if test "$COMMON_ppc" = "yes"; then ARCH="ppc"; fi ;; ppc*) ;; @@ -894,8 +1576,7 @@ else COMMON_s390=no fi -fi - +fi; case "$ARCH" in s390x) if test "$COMMON_s390" = "yes"; then ARCH="s390"; fi ;; s390*) ;; @@ -903,6 +1584,23 @@ esac +COMMON_i386=yes +# Check whether --enable-common-i386 or --disable-common-i386 was given. +if test "${enable_common_i386+set}" = set; then + enableval="$enable_common_i386" + if test "$enableval" = "yes"; then + COMMON_i386=yes + else + COMMON_i386=no +fi +fi; +case "$ARCH" in + x86_64) if test "$COMMON_i386" = "yes"; then ARCH="i386"; fi ;; + i386*) ;; + *) COMMON_i386=no ;; +esac + + case "$ARCH" in @@ -919,8 +1617,7 @@ fi else STRIP=$DEFAULT_STRIP -fi - +fi; # If zlib is required, libz must be linked static, insmod is in /sbin, libz is @@ -930,315 +1627,665 @@ if test "${enable_zlib+set}" = set; then enableval="$enable_zlib" if test "$enableval" = "yes"; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define CONFIG_USE_ZLIB 1 -EOF +_ACEOF - zlib_flags="-Wl,-Bstatic -lz" - if test "$insmod_static" = "no"; then - zlib_flags="$zlib_flags -Wl,-Bdynamic" - fi -fi + ZLIB="-lz" fi +fi; + +# Check whether --with-dynamic-zlib or --without-dynamic-zlib was given. +if test "${with_dynamic_zlib+set}" = set; then + withval="$with_dynamic_zlib" +else + with_dynamic_zlib=no +fi; +if test "$with_dynamic_zlib" = "yes"; then + ZLIB_STATIC="$ZLIB" +else + ZLIB_STATIC="-Wl,-Bstatic $ZLIB -Wl,-Bdynamic" +fi # Default for use-syscall depends on the presence of query_module in libc. -echo $ac_n "checking for query_module in -lc""... $ac_c" 1>&6 -echo "configure:948: checking for query_module in -lc" >&5 -ac_lib_var=`echo c'_'query_module | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" -LIBS="-lc $LIBS" -cat > conftest.$ac_ext <&5 + break 2 + fi +done +done -int main() { -query_module() -; return 0; } -EOF -if { (eval echo configure:967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" fi -rm -f conftest* -LIBS="$ac_save_LIBS" - fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - default_syscall=n +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 -default_syscall=y + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -# Check whether --enable-use-syscall or --disable-use-syscall was given. -if test "${enable_use_syscall+set}" = set; then - enableval="$enable_use_syscall" - if test "$enableval" = "yes"; then - USE_SYSCALL="y" +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - USE_SYSCALL="n" + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 else - USE_SYSCALL="$default_syscall" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -if test "$USE_SYSCALL" = "y"; then - cat >> confdefs.h <<\EOF -#define CONFIG_USE_SYSCALL 1 -EOF - + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" fi - -# Check whether --enable-root-check or --disable-root-check was given. -if test "${enable_root_check+set}" = set; then - enableval="$enable_root_check" - if test "$enableval" = "yes"; then - cat >> confdefs.h <<\EOF -#define CONFIG_ROOT_CHECK_OFF 0 -EOF - +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >> confdefs.h <<\EOF -#define CONFIG_ROOT_CHECK_OFF 1 -EOF + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - cat >> confdefs.h <<\EOF -#define CONFIG_ROOT_CHECK_OFF 0 -EOF - + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - -# If the user did not specify CFLAGS, use suitable values for modutils -if test "$CFLAGS" = ""; then - CFLAGS="-O2 -Wall" fi - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1038: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1068: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift - if test $# -gt 0; then + if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1119: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - ;; - esac + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1151: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + test -n "$ac_ct_CC" && break +done -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross + CC=$ac_ct_CC +fi -cat > conftest.$ac_ext << EOF +fi -#line 1162 "configure" -#include "confdefs.h" -main(){return(0);} -EOF -if { (eval echo configure:1167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output" >&5 +echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no else - ac_cv_prog_cc_cross=yes + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1193: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1198: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1226: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else - ac_cv_prog_cc_g=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_prog_cc_g=no fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" + CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" @@ -1252,61 +2299,1084 @@ CFLAGS= fi fi - -# Delay adding the zlib_flags until after AC_PROG_CC, so we can distinguish -# between a broken cc and a working cc but missing libz.a. There are no -# standard autoconf tests for the presence of a static library, so just set -# LDFLAGS and let the link step check for libz.a. -LDFLAGS="$LDFLAGS $zlib_flags" -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1265: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for query_module in -lc" >&5 +echo $ECHO_N "checking for query_module in -lc... $ECHO_C" >&6 +if test "${ac_cv_lib_c_query_module+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char query_module (); +int +main () +{ +query_module (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_query_module=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_query_module=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_query_module" >&5 +echo "${ECHO_T}$ac_cv_lib_c_query_module" >&6 +if test $ac_cv_lib_c_query_module = yes; then + default_syscall=n +else + default_syscall=y +fi + +# Check whether --enable-use-syscall or --disable-use-syscall was given. +if test "${enable_use_syscall+set}" = set; then + enableval="$enable_use_syscall" + if test "$enableval" = "yes"; then + USE_SYSCALL="y" +else + USE_SYSCALL="n" +fi +else + USE_SYSCALL="$default_syscall" +fi; +if test "$USE_SYSCALL" = "y"; then + cat >>confdefs.h <<\_ACEOF +#define CONFIG_USE_SYSCALL 1 +_ACEOF + +fi + + +# Check whether --enable-root-check or --disable-root-check was given. +if test "${enable_root_check+set}" = set; then + enableval="$enable_root_check" + if test "$enableval" = "yes"; then + cat >>confdefs.h <<\_ACEOF +#define CONFIG_ROOT_CHECK_OFF 0 +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define CONFIG_ROOT_CHECK_OFF 1 +_ACEOF + +fi +else + cat >>confdefs.h <<\_ACEOF +#define CONFIG_ROOT_CHECK_OFF 0 +_ACEOF + +fi; + +# If the user did not specify CFLAGS, use suitable values for modutils +if test "$CFLAGS" = ""; then + CFLAGS="-O2 -Wall" +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -RANLIB="$ac_cv_prog_RANLIB" +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1293: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else - ac_cv_prog_LN_S=ln +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6 fi @@ -1367,130 +3437,195 @@ fi -echo $ac_n "checking for wordexp""... $ac_c" 1>&6 -echo "configure:1372: checking for wordexp" >&5 -if eval "test \"`echo '$''{'ac_cv_func_wordexp'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for wordexp... $ECHO_C" >&6 +if test "${ac_cv_func_wordexp+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char wordexp(); below. */ -#include + which can conflict with char wordexp (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char wordexp(); - -int main() { - + builtin and then its argument prototype would still apply. */ +char wordexp (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_wordexp) || defined (__stub___wordexp) choke me #else -wordexp(); +char (*f) () = wordexp; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_wordexp=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_wordexp=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'wordexp`\" = yes"; then - echo "$ac_t""yes" 1>&6 +int +main () +{ +return f != wordexp; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_wordexp=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_wordexp=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_wordexp" >&5 +echo "${ECHO_T}$ac_cv_func_wordexp" >&6 +if test $ac_cv_func_wordexp = yes; then HAVE_WORDEXP="-DHAVE_WORDEXP=1" else - echo "$ac_t""no" 1>&6 -HAVE_WORDEXP="" + HAVE_WORDEXP="" fi -echo $ac_n "checking for glob""... $ac_c" 1>&6 -echo "configure:1423: checking for glob" >&5 -if eval "test \"`echo '$''{'ac_cv_func_glob'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for glob" >&5 +echo $ECHO_N "checking for glob... $ECHO_C" >&6 +if test "${ac_cv_func_glob+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char glob(); below. */ -#include + which can conflict with char glob (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char glob(); - -int main() { - + builtin and then its argument prototype would still apply. */ +char glob (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_glob) || defined (__stub___glob) choke me #else -glob(); +char (*f) () = glob; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_glob=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_glob=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'glob`\" = yes"; then - echo "$ac_t""yes" 1>&6 +int +main () +{ +return f != glob; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_glob=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_glob=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_glob" >&5 +echo "${ECHO_T}$ac_cv_func_glob" >&6 +if test $ac_cv_func_glob = yes; then HAVE_GLOB="-DHAVE_GLOB=1" else - echo "$ac_t""no" 1>&6 -HAVE_GLOB="" + HAVE_GLOB="" fi if test "$ARCH" = "alpha"; then - echo $ac_n "checking for broken alpha assembler""... $ac_c" 1>&6 -echo "configure:1475: checking for broken alpha assembler" >&5 + echo "$as_me:$LINENO: checking for broken alpha assembler" >&5 +echo $ECHO_N "checking for broken alpha assembler... $ECHO_C" >&6 cat > conftest.c <&5; (eval $ac_compile) 2>&5; }; then + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then ac_broken_gas=no if objdump -r conftest.o | grep 'LITERAL.*y.*4$' > /dev/null; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define AXP_BROKEN_GAS 1 -EOF +_ACEOF ac_broken_gas=yes fi rm -rf conftest* else - { echo "configure: error: what, we can't build a simple proggie?" 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: what, we can't build a simple proggie?" >&5 +echo "$as_me: error: what, we can't build a simple proggie?" >&2;} + { (exit 1); exit 1; }; } fi - echo "$ac_t""$ac_broken_gas" 1>&6 + echo "$as_me:$LINENO: result: $ac_broken_gas" >&5 +echo "${ECHO_T}$ac_broken_gas" >&6 fi # If the user did not specify a prefix, then change exec_prefix @@ -1501,299 +3636,1016 @@ fi fi -trap '' 1 2 15 -cat > confcache <<\EOF +# If zlib was requested, check if it actually exists. +if test "$enable_zlib" = "yes"; then + modutils_save_LIBS="$LIBS" + LIBS="$LIBS $ZLIB_STATIC" + echo "$as_me:$LINENO: checking for gzopen" >&5 +echo $ECHO_N "checking for gzopen... $ECHO_C" >&6 +if test "${ac_cv_func_gzopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gzopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gzopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gzopen) || defined (__stub___gzopen) +choke me +#else +char (*f) () = gzopen; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != gzopen; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_gzopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_gzopen=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_gzopen" >&5 +echo "${ECHO_T}$ac_cv_func_gzopen" >&6 +if test $ac_cv_func_gzopen = yes; then + : +else + { { echo "$as_me:$LINENO: error: zlib is required for handling gzipped objects" >&5 +echo "$as_me: error: zlib is required for handling gzipped objects" >&2;} + { (exit 1); exit 1; }; } +fi + + LIBS="$modutils_save_LIBS" +fi + + + + + ac_config_files="$ac_config_files Makefile Makefile.common depmod/Makefile genksyms/Makefile insmod/Makefile $kerneld_Makefiles obj/Makefile util/Makefile man/Makefile" +cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. # -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. # -EOF +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' fi -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs +LTLIBOBJS=$ac_ltlibobjs -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. # Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# # Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. +# configure, is in config.log if it exists. -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME do - case "\$ac_option" in + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.57, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + esac + shift done -ac_given_srcdir=$srcdir +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF -trap 'rm -fr `echo "Makefile Makefile.common depmod/Makefile genksyms/Makefile - insmod/Makefile $kerneld_Makefiles obj/Makefile util/Makefile - man/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@target@%$target%g -s%@target_alias@%$target_alias%g -s%@target_cpu@%$target_cpu%g -s%@target_vendor@%$target_vendor%g -s%@target_os@%$target_os%g -s%@build@%$build%g -s%@build_alias@%$build_alias%g -s%@build_cpu@%$build_cpu%g -s%@build_vendor@%$build_vendor%g -s%@build_os@%$build_os%g -s%@COMBINE_rmmod@%$COMBINE_rmmod%g -s%@COMBINE_modprobe@%$COMBINE_modprobe%g -s%@COMBINE_lsmod@%$COMBINE_lsmod%g -s%@COMBINE_ksyms@%$COMBINE_ksyms%g -s%@COMBINE_kallsyms@%$COMBINE_kallsyms%g -s%@kerneld_SUBDIR@%$kerneld_SUBDIR%g -s%@insmod_static@%$insmod_static%g -s%@COMMON_sparc@%$COMMON_sparc%g -s%@COMMON_hppa@%$COMMON_hppa%g -s%@COMMON_ppc@%$COMMON_ppc%g -s%@COMMON_s390@%$COMMON_s390%g -s%@ARCH@%$ARCH%g -s%@STRIP@%$STRIP%g -s%@USE_SYSCALL@%$USE_SYSCALL%g -s%@CC@%$CC%g -s%@RANLIB@%$RANLIB%g -s%@LN_S@%$LN_S%g -s%@INSTALL_LOCAL@%$INSTALL_LOCAL%g -s%@BUILDCC@%$BUILDCC%g -s%@BUILDCFLAGS@%$BUILDCFLAGS%g -s%@AR@%$AR%g -s%@PARSERCFLAGS@%$PARSERCFLAGS%g -s%@MKDIR@%$MKDIR%g -s%@TAINT_URL@%$TAINT_URL%g -s%@HAVE_WORDEXP@%$HAVE_WORDEXP%g -s%@HAVE_GLOB@%$HAVE_GLOB%g + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "Makefile.common" ) CONFIG_FILES="$CONFIG_FILES Makefile.common" ;; + "depmod/Makefile" ) CONFIG_FILES="$CONFIG_FILES depmod/Makefile" ;; + "genksyms/Makefile" ) CONFIG_FILES="$CONFIG_FILES genksyms/Makefile" ;; + "insmod/Makefile" ) CONFIG_FILES="$CONFIG_FILES insmod/Makefile" ;; + "$kerneld_Makefiles" ) CONFIG_FILES="$CONFIG_FILES $kerneld_Makefiles" ;; + "obj/Makefile" ) CONFIG_FILES="$CONFIG_FILES obj/Makefile" ;; + "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;; + "man/Makefile" ) CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@COMBINE_rmmod@,$COMBINE_rmmod,;t t +s,@COMBINE_modprobe@,$COMBINE_modprobe,;t t +s,@COMBINE_lsmod@,$COMBINE_lsmod,;t t +s,@COMBINE_ksyms@,$COMBINE_ksyms,;t t +s,@COMBINE_kallsyms@,$COMBINE_kallsyms,;t t +s,@COMPAT_2_0@,$COMPAT_2_0,;t t +s,@kerneld_SUBDIR@,$kerneld_SUBDIR,;t t +s,@insmod_static@,$insmod_static,;t t +s,@COMMON_sparc@,$COMMON_sparc,;t t +s,@COMMON_hppa@,$COMMON_hppa,;t t +s,@COMMON_ppc@,$COMMON_ppc,;t t +s,@COMMON_s390@,$COMMON_s390,;t t +s,@COMMON_i386@,$COMMON_i386,;t t +s,@ARCH@,$ARCH,;t t +s,@STRIP@,$STRIP,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@USE_SYSCALL@,$USE_SYSCALL,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@LN_S@,$LN_S,;t t +s,@INSTALL_LOCAL@,$INSTALL_LOCAL,;t t +s,@BUILDCC@,$BUILDCC,;t t +s,@BUILDCFLAGS@,$BUILDCFLAGS,;t t +s,@AR@,$AR,;t t +s,@PARSERCFLAGS@,$PARSERCFLAGS,;t t +s,@MKDIR@,$MKDIR,;t t +s,@TAINT_URL@,$TAINT_URL,;t t +s,@HAVE_WORDEXP@,$HAVE_WORDEXP,;t t +s,@HAVE_GLOB@,$HAVE_GLOB,;t t +s,@ZLIB@,$ZLIB,;t t +s,@ZLIB_STATIC@,$ZLIB_STATIC,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF -EOF -cat >> $CONFIG_STATUS <<\EOF +_ACEOF -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF +fi # test -n "$CONFIG_FILES" -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." -EOF -cat >> $CONFIG_STATUS <&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi -EOF -cat >> $CONFIG_STATUS <<\EOF +done +_ACEOF -exit 0 -EOF +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi diff -Nur modutils-2.4.25/configure.in modutils-2.4.26/configure.in --- modutils-2.4.25/configure.in 2003-03-29 11:08:42.000000000 +1100 +++ modutils-2.4.26/configure.in 2003-10-28 13:10:19.000000000 +1100 @@ -26,6 +26,7 @@ i?86) ARCH=i386 ;; arm*) ARCH=arm ;; mips*) ARCH=mips ;; + sh64) ARCH=sh64 ;; sh*) ARCH=sh ;; powerpc) ARCH=ppc ;; powerpc64) ARCH=ppc64 ;; @@ -103,7 +104,11 @@ 2.0 system (default)], [if test "$enableval" = "yes"; then AC_DEFINE(COMPAT_2_0) -fi]) + COMPAT_2_0="y" +else + COMPAT_2_0="n" +fi],[COMPAT_2_0="n"]) +AC_SUBST(COMPAT_2_0) AC_ARG_ENABLE(kerneld, [ --disable-kerneld Do not create kerneld binary (default)], @@ -190,6 +195,23 @@ esac AC_SUBST(COMMON_s390) +COMMON_i386=yes +AC_ARG_ENABLE(common-i386, +[ --enable-common-i386 Make one executable handle 32 and 64 bit kernel + modules (default on i386 is yes, default on other + architectures is no)], +[if test "$enableval" = "yes"; then + COMMON_i386=yes + else + COMMON_i386=no +fi]) +case "$ARCH" in + x86_64) if test "$COMMON_i386" = "yes"; then ARCH="i386"; fi ;; + i386*) ;; + *) COMMON_i386=no ;; +esac +AC_SUBST(COMMON_i386) + AC_SUBST(ARCH) case "$ARCH" in @@ -214,11 +236,16 @@ [ --disable-zlib Do not handle gzipped objects (default)], [if test "$enableval" = "yes"; then AC_DEFINE(CONFIG_USE_ZLIB) - zlib_flags="-Wl,-Bstatic -lz" - if test "$insmod_static" = "no"; then - zlib_flags="$zlib_flags -Wl,-Bdynamic" - fi + ZLIB="-lz" fi]) +AC_ARG_WITH(dynamic-zlib, +[ --without-dynamic-zlib Link against static zlib (default)],[], +[with_dynamic_zlib=no]) +if test "$with_dynamic_zlib" = "yes"; then + ZLIB_STATIC="$ZLIB" +else + ZLIB_STATIC="-Wl,-Bstatic $ZLIB -Wl,-Bdynamic" +fi # Default for use-syscall depends on the presence of query_module in libc. AC_CHECK_LIB(c, query_module, [default_syscall=n], [default_syscall=y]) @@ -251,11 +278,6 @@ fi AC_PROG_CC -# Delay adding the zlib_flags until after AC_PROG_CC, so we can distinguish -# between a broken cc and a working cc but missing libz.a. There are no -# standard autoconf tests for the presence of a static library, so just set -# LDFLAGS and let the link step check for libz.a. -LDFLAGS="$LDFLAGS $zlib_flags" AC_PROG_RANLIB AC_PROG_LN_S @@ -350,6 +372,18 @@ fi fi +# If zlib was requested, check if it actually exists. +if test "$enable_zlib" = "yes"; then + modutils_save_LIBS="$LIBS" + LIBS="$LIBS $ZLIB_STATIC" + AC_CHECK_FUNC(gzopen,, + AC_MSG_ERROR([zlib is required for handling gzipped objects])) + LIBS="$modutils_save_LIBS" +fi + +AC_SUBST(ZLIB) +AC_SUBST(ZLIB_STATIC) + AC_OUTPUT(Makefile Makefile.common depmod/Makefile genksyms/Makefile insmod/Makefile $kerneld_Makefiles obj/Makefile util/Makefile man/Makefile) diff -Nur modutils-2.4.25/depmod/Makefile.in modutils-2.4.26/depmod/Makefile.in --- modutils-2.4.25/depmod/Makefile.in 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/depmod/Makefile.in 2003-10-27 15:42:07.000000000 +1100 @@ -24,12 +24,16 @@ DEFS64 := -DELF_MACHINE_H='"elf_s390x.h"' -DARCH_s390x endif +ifeq (@COMMON_i386@,yes) +DEFS64 := -DELF_MACHINE_H='"elf_x86_64.h"' -DARCH_x86_64 +endif + # arch independent definitions for common 32/64 code ifdef DEFS64 DEFSNOARCH += -DCOMMON_3264 DEFS += -DONLY_32 -DEFS64 += -DONLY_64 +DEFS64 += -DONLY_64 $(call check_gcc,-malign-double,) OBJS += depmod_64.o endif @@ -46,7 +50,7 @@ all: .depend depmod depmod: $(OBJS) ../util/libutil.a ../obj/libobj.a - $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB_STATIC) clean: rm -f *.o diff -Nur modutils-2.4.25/genksyms/Makefile.in modutils-2.4.26/genksyms/Makefile.in --- modutils-2.4.25/genksyms/Makefile.in 2002-11-25 14:23:35.000000000 +1100 +++ modutils-2.4.26/genksyms/Makefile.in 2003-10-27 13:16:57.000000000 +1100 @@ -17,10 +17,12 @@ parse.o: parse.c $(CC) $(CFLAGS) $(PARSERCFLAGS) $(DEFS) -c -o $@ $< -parse.c parse.h: parse.y +parse.c: parse.y @echo "expect 6 shift/reduce conflicts and 5 reduce/reduce conflicts." bison -o parse.c -dtv $^ +parse.h: parse.c + lex.o: lex.c $(CC) $(CFLAGS) $(PARSERCFLAGS) $(DEFS) -c -o $@ $< diff -Nur modutils-2.4.25/include/config.h modutils-2.4.26/include/config.h --- modutils-2.4.25/include/config.h 2002-11-25 14:53:13.000000000 +1100 +++ modutils-2.4.26/include/config.h 2003-10-26 22:28:14.000000000 +1100 @@ -100,7 +100,7 @@ extern char *persistdir; -char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno); +char *fgets_strip(char **buf, int *sizebuf, FILE * fin, int *lineno); int config_read(int all, char *force_ver, char *base_dir, char *conf_file); GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only); char *search_module_path(const char *base); diff -Nur modutils-2.4.25/include/elf_ppc64.h modutils-2.4.26/include/elf_ppc64.h --- modutils-2.4.25/include/elf_ppc64.h 2001-11-17 22:16:57.000000000 +1100 +++ modutils-2.4.26/include/elf_ppc64.h 2003-10-27 13:34:46.000000000 +1100 @@ -11,6 +11,7 @@ struct obj_file; extern int ppc64_process_syms (struct obj_file *); extern Elf64_Addr ppc64_module_base (struct obj_file *); +#define arch_module_base ppc64_module_base /* these ought to be eventually available in /usr/include/elf.h */ #ifndef EM_PPC64 diff -Nur modutils-2.4.25/include/elf_sh64.h modutils-2.4.26/include/elf_sh64.h --- modutils-2.4.25/include/elf_sh64.h 1970-01-01 10:00:00.000000000 +1000 +++ modutils-2.4.26/include/elf_sh64.h 2003-10-27 13:59:49.000000000 +1100 @@ -0,0 +1,9 @@ +/* Machine-specific elf macros for the sh64. */ + +#define ELFCLASSM ELFCLASS32 +#define ELFDATAM ELFDATA2LSB + +#define MATCH_MACHINE(x) (x == EM_SH) + +#define SHT_RELM SHT_RELA +#define Elf32_RelM Elf32_Rela diff -Nur modutils-2.4.25/include/elf_x86_64.h modutils-2.4.26/include/elf_x86_64.h --- modutils-2.4.25/include/elf_x86_64.h 2002-03-24 15:09:11.000000000 +1100 +++ modutils-2.4.26/include/elf_x86_64.h 2003-10-27 13:34:46.000000000 +1100 @@ -7,3 +7,5 @@ #define SHT_RELM SHT_RELA #define Elf64_RelM Elf64_Rela + +#define arch_module_base(m) ((ElfW(Addr)) 0xffffffff00000000ull) diff -Nur modutils-2.4.25/include/obj.h modutils-2.4.26/include/obj.h --- modutils-2.4.25/include/obj.h 2002-07-21 17:00:22.000000000 +1000 +++ modutils-2.4.26/include/obj.h 2003-10-27 13:34:46.000000000 +1100 @@ -259,6 +259,10 @@ int arch_archdata (struct obj_file *fin, struct obj_section *sec); +#ifndef arch_module_base +#define arch_module_base(m) ((ElfW(Addr))0) +#endif + #define ARCHDATA_SEC_NAME "__archdata" /* Pointers in objects can be 32 or 64 bit */ diff -Nur modutils-2.4.25/include/version.h modutils-2.4.26/include/version.h --- modutils-2.4.25/include/version.h 2003-03-29 10:43:56.000000000 +1100 +++ modutils-2.4.26/include/version.h 2003-04-05 08:35:52.000000000 +1000 @@ -1 +1 @@ -#define MODUTILS_VERSION "2.4.25" +#define MODUTILS_VERSION "2.4.26" diff -Nur modutils-2.4.25/insmod/insmod.c modutils-2.4.26/insmod/insmod.c --- modutils-2.4.25/insmod/insmod.c 2003-03-23 13:34:28.000000000 +1100 +++ modutils-2.4.26/insmod/insmod.c 2003-10-27 13:34:46.000000000 +1100 @@ -648,9 +648,7 @@ for (i = 0; i < n_module_stat; ++i) if (module_stat[i].status /* used */) { dep->dep = module_stat[i].addr; -#ifdef ARCH_ppc64 - dep->dep |= ppc64_module_base (f); -#endif + dep->dep |= arch_module_base (f); obj_symbol_patch(f, sec->idx, (char *) &dep->ref - sec->contents, tm); dep->next_ref = 0; ++dep; @@ -2083,9 +2081,7 @@ } else { errno = 0; m_addr = create_module(m_name, m_size); -#ifdef ARCH_ppc64 - m_addr |= ppc64_module_base (f); -#endif + m_addr |= arch_module_base (f); switch (errno) { case 0: break; diff -Nur modutils-2.4.25/insmod/Makefile.in modutils-2.4.26/insmod/Makefile.in --- modutils-2.4.25/insmod/Makefile.in 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/insmod/Makefile.in 2003-10-27 15:42:07.000000000 +1100 @@ -46,6 +46,10 @@ DEFS64 := -DELF_MACHINE_H='"elf_s390x.h"' -DARCH_s390x endif +ifeq (@COMMON_i386@,yes) +DEFS64 := -DELF_MACHINE_H='"elf_x86_64.h"' -DARCH_x86_64 +endif + # arch independent definitions for common 32/64 code ifdef DEFS64 @@ -58,7 +62,7 @@ MODINFOOBJS += modinfo_64.o DEFSNOARCH += -DCOMMON_3264 DEFS += -DONLY_32 -DEFS64 += -DONLY_64 +DEFS64 += -DONLY_64 $(call check_gcc,-malign-double,) DEFS64 += -DTAINT_URL='"$(TAINT_URL)"' endif @@ -90,17 +94,17 @@ # Rule for building "normal" modutils executables (non-combined) %: %.c ../obj/libobj.a ../util/libutil.a - $(CC) $(CFLAGS) $(DEFSNOARCH) $(DEFS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) $(CFLAGS) $(DEFSNOARCH) $(DEFS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB_STATIC) #===================================================================== all: .depend $(TARGETS) insmod: $(INSMODOBJS) ../obj/libobj.a ../util/libutil.a - $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB_STATIC) insmod.static: $(INSMODOBJS) ../obj/libobj.a ../util/libutil.a - $(CC) -static $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) -static $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB) $(COMB): insmod ln -sf $< $@ @@ -110,11 +114,11 @@ ifneq (@COMBINE_kallsyms@,kallsyms) kallsyms: $(KALLSYMSOBJS) ../obj/libobj.a ../util/libutil.a - $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB_STATIC) endif modinfo: $(MODINFOOBJS) ../obj/libobj.a ../util/libutil.a - $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LIBS) $(ZLIB_STATIC) install install-bin: all @set -ex;\ diff -Nur modutils-2.4.25/insmod/modprobe.c modutils-2.4.26/insmod/modprobe.c --- modutils-2.4.25/insmod/modprobe.c 2002-11-25 14:26:44.000000000 +1100 +++ modutils-2.4.26/insmod/modprobe.c 2003-10-27 13:22:22.000000000 +1100 @@ -776,7 +776,8 @@ struct stat statbuf; int ret = 0; int line_no; - char buf[3000]; + int sizebuf; + char *buf = NULL; const char *depfile = gen_file[GEN_DEPFILE].name; if ((fin = fopen(depfile, "r")) == NULL) { @@ -794,9 +795,9 @@ config_file, depfile); #endif - while (fgets_strip(buf, sizeof(buf) - 1, fin, &line_no) != NULL) { + while (fgets_strip(&buf, &sizebuf, fin, &line_no) != NULL) { NODE *nod; - char line[sizeof(buf)]; + char line[sizebuf]; char *pt; char *modname; int len = strlen(buf); @@ -1425,7 +1426,7 @@ if (ret == -2) { if (error_name && error_name != name) error("Can't locate module %s which is needed for %s", error_name, name); - else + else if (!quiet) error("Can't locate module %s", name); } else diff -Nur modutils-2.4.25/Makefile.common.in modutils-2.4.26/Makefile.common.in --- modutils-2.4.25/Makefile.common.in 2002-11-25 14:23:35.000000000 +1100 +++ modutils-2.4.26/Makefile.common.in 2003-10-28 13:10:19.000000000 +1100 @@ -26,3 +26,8 @@ RANLIB = @RANLIB@ STRIP = @STRIP@ USE_SYSCALL = @USE_SYSCALL@ +ZLIB = @ZLIB@ +ZLIB_STATIC = @ZLIB_STATIC@ +COMPAT_2_0 = @COMPAT_2_0@ + +check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi) diff -Nur modutils-2.4.25/man/modprobe.8 modutils-2.4.26/man/modprobe.8 --- modutils-2.4.25/man/modprobe.8 2003-02-12 14:51:53.000000000 +1100 +++ modutils-2.4.26/man/modprobe.8 2003-10-27 13:20:26.000000000 +1100 @@ -67,7 +67,7 @@ These options will automatically be sent to \fBinsmod\fR. .TP .BR \-l ", " \-\-list -List matching modules. +List modules matching given \fIpattern\fR. .TP .BR \-n ", " \-\-show Don't actually perform the action, just show what would be done. @@ -86,10 +86,11 @@ This options will automatically be sent to \fBinsmod\fR. .TP \fB\-t\fR\ \fImoduletype\fR;\ \fB\-\-type\fR\ \fImoduletype\fR -Only consider modules of this type. modprobe will only look at modules -whose directory path includes exactly "\fI/moduletype/\fR". \fImoduletype\fR -can include more than one directory name, e.g. "\fB\-t\fR\ \fIdrivers/net\fR" -would list modules in \fIxxx/drivers/net/\fR and its subdirectories. +Only consider modules of this type that match given \fIpattern\fR. modprobe +will only look at modules whose directory path includes exactly +"\fI/moduletype/\fR". \fImoduletype\fR can include more than one directory +name, e.g. "\fB\-t\fR\ \fIdrivers/net\fR" would list modules in +\fIxxx/drivers/net/\fR and its subdirectories. .TP .BR \-v ", " \-\-verbose Print all commands as they are executed. @@ -102,7 +103,8 @@ trailing '.o'. For example, slip is a valid module name for .BR modprobe , /lib/modules/2.2.19/net/slip and slip.o are invalid. This applies to -the command line and to entries in the config. +entries in the config and the command line where \fImodule\fR is used. +Patterns are expected to have a trailing .o as found in the filename. .SH DESCRIPTION The \fBmodprobe\fR and \fBdepmod\fR utilities are intended to make a Linux modular kernel more manageable for all users, diff -Nur modutils-2.4.25/modutils.spec modutils-2.4.26/modutils.spec --- modutils-2.4.25/modutils.spec 2003-03-29 10:43:56.000000000 +1100 +++ modutils-2.4.26/modutils.spec 2003-04-05 08:35:52.000000000 +1000 @@ -1,6 +1,6 @@ Summary: Module utilities Name: modutils -Version: 2.4.25 +Version: 2.4.26 Release: 1 Copyright: GPL Group: Utilities/System diff -Nur modutils-2.4.25/obj/Makefile.in modutils-2.4.26/obj/Makefile.in --- modutils-2.4.25/obj/Makefile.in 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/obj/Makefile.in 2003-10-27 15:42:07.000000000 +1100 @@ -34,6 +34,12 @@ DEFS64 := -DELF_MACHINE_H='"elf_s390x.h"' -DARCH_s390x endif +ifeq (@COMMON_i386@,yes) +LIBOBJ_OBJS += obj_x86_64_64.o +LIBOBJ_SRCS += obj_x86_64.c +DEFS64 := -DELF_MACHINE_H='"elf_x86_64.h"' -DARCH_x86_64 +endif + # arch independent definitions for common 32/64 code @@ -41,7 +47,7 @@ LIBOBJ_OBJS += obj_kallsyms_64.o obj_common_64.o obj_load_64.o obj_reloc_64.o obj_gpl_license_64.o DEFSNOARCH += -DCOMMON_3264 DEFS += -DONLY_32 -DEFS64 += -DONLY_64 +DEFS64 += -DONLY_64 $(call check_gcc,-malign-double,) endif %.o: %.c diff -Nur modutils-2.4.25/obj/obj_load.c modutils-2.4.26/obj/obj_load.c --- modutils-2.4.25/obj/obj_load.c 2002-03-01 11:39:06.000000000 +1100 +++ modutils-2.4.26/obj/obj_load.c 2003-10-27 13:59:12.000000000 +1100 @@ -238,8 +238,27 @@ else name = f->sections[sym->st_shndx]->name; - obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx, - sym->st_value, sym->st_size); + { +#ifdef ARCH_sh64 + + /* + * For sh64 it is possible that the target of a branch requires a + * mode switch---32 to 16 and back again---and this is implied by + * the lsb being set in the target address for SHmedia mode and clear + * for SHcompact. + */ + int lsb; + lsb = (sym->st_other & 4) ? 1 : 0; + + obj_add_symbol(f, name, j, sym->st_info, + sym->st_shndx, + sym->st_value | lsb, sym->st_size); +#else + obj_add_symbol(f, name, j, sym->st_info, + sym->st_shndx, + sym->st_value, sym->st_size); +#endif + } } } diff -Nur modutils-2.4.25/obj/obj_mips.c modutils-2.4.26/obj/obj_mips.c --- modutils-2.4.25/obj/obj_mips.c 2002-03-01 11:39:06.000000000 +1100 +++ modutils-2.4.26/obj/obj_mips.c 2003-04-05 08:47:17.000000000 +1000 @@ -74,7 +74,8 @@ { case SHT_MIPS_DEBUG: case SHT_MIPS_REGINFO: - /* Actually these two sections are as useless as something can be ... */ + case SHT_MIPS_DWARF: + /* Ignore debugging sections */ sec->contents = NULL; break; @@ -83,10 +84,10 @@ case SHT_MIPS_GPTAB: case SHT_MIPS_UCODE: case SHT_MIPS_OPTIONS: - case SHT_MIPS_DWARF: case SHT_MIPS_EVENTS: /* These shouldn't ever be in a module file. */ error("Unhandled section header type: %08x", sec->header.sh_type); + return -1; default: /* We don't even know the type. This time it might as well be a diff -Nur modutils-2.4.25/obj/obj_reloc.c modutils-2.4.26/obj/obj_reloc.c --- modutils-2.4.25/obj/obj_reloc.c 2002-03-01 11:39:06.000000000 +1100 +++ modutils-2.4.26/obj/obj_reloc.c 2003-10-27 13:25:08.000000000 +1100 @@ -96,7 +96,8 @@ else if (sym->r_type) /* assumes R_arch_NONE is 0 on all arch */ { if (!quiet) - error("unresolved symbol %s", sym->name); + error("%s: unresolved symbol %s", + f->filename, sym->name); ret = 0; } } @@ -317,8 +318,8 @@ if (symndx >= nsyms) { - error("Bad symbol index: %08lx >= %08lx", - symndx, nsyms); + error("%s: Bad symbol index: %08lx >= %08lx", + f->filename, symndx, nsyms); continue; } @@ -349,7 +350,7 @@ errmsg = "Modules compiled with -mconstant-gp cannot be loaded"; goto bad_reloc; bad_reloc: - error("%s of type %ld for %s", errmsg, + error("%s: %s of type %ld for %s", f->filename, errmsg, (long)ELFW(R_TYPE)(rel->r_info), intsym->name); ret = 0; break; diff -Nur modutils-2.4.25/obj/obj_s390.c modutils-2.4.26/obj/obj_s390.c --- modutils-2.4.25/obj/obj_s390.c 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/obj/obj_s390.c 2003-10-27 13:35:40.000000000 +1100 @@ -30,6 +30,10 @@ #include #include +/* older glibc versions had a wrong name for R_390_GOTOFF32 */ +#ifndef R_390_GOTOFF32 +#define R_390_GOTOFF32 R_390_GOTOFF +#endif /*======================================================================*/ @@ -204,7 +208,7 @@ *(unsigned int *) loc += isym->gotent.offset; break; - case R_390_GOTOFF: + case R_390_GOTOFF32: assert(got != 0); *loc += v - got; break; @@ -264,7 +268,7 @@ /* The next three don't need got entries but the address of the got itself. */ case R_390_GOTPC: - case R_390_GOTOFF: + case R_390_GOTOFF32: gotneeded = 1; break; diff -Nur modutils-2.4.25/obj/obj_s390x.c modutils-2.4.26/obj/obj_s390x.c --- modutils-2.4.25/obj/obj_s390x.c 2003-03-29 10:54:20.000000000 +1100 +++ modutils-2.4.26/obj/obj_s390x.c 2003-10-27 13:35:40.000000000 +1100 @@ -30,6 +30,10 @@ #include #include +/* older glibc versions had a wrong name for R_390_GOTOFF32 */ +#ifndef R_390_GOTOFF32 +#define R_390_GOTOFF32 R_390_GOTOFF +#endif /*======================================================================*/ @@ -231,7 +235,7 @@ *(unsigned int *) loc += isym->gotent.offset >> 1; break; - case R_390_GOTOFF: + case R_390_GOTOFF32: assert(got != 0); *loc += v - got; break; @@ -294,7 +298,7 @@ of the got itself. */ case R_390_GOTPC: case R_390_GOTPCDBL: - case R_390_GOTOFF: + case R_390_GOTOFF32: gotneeded = 1; break; diff -Nur modutils-2.4.25/obj/obj_sh64.c modutils-2.4.26/obj/obj_sh64.c --- modutils-2.4.25/obj/obj_sh64.c 1970-01-01 10:00:00.000000000 +1000 +++ modutils-2.4.26/obj/obj_sh64.c 2003-10-27 13:59:49.000000000 +1100 @@ -0,0 +1,302 @@ +/* sh64 specific support for Elf loading and relocation. + Copyright 1999 Linux International. + + Contributed by Benedict R. Gaster (benedict.gaster@superh.com) + + Currently limited to support only 32bit ABI. + + This file is part of the Linux modutils. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 2 of the License, or (at your + option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include +#include + +#include +#include +#include + +/*======================================================================*/ + +/* Standard method of finding relocation symbols, sets isym */ +#define obj_find_relsym(isym, f, find, rel, symtab, strtab) \ + { \ + unsigned long symndx = ELFW(R_SYM)((rel)->r_info); \ + ElfW(Sym) *extsym = (symtab)+symndx; \ + if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL) { \ + isym = (typeof(isym)) (f)->local_symtab[symndx]; \ + } \ + else { \ + const char *name; \ + if (extsym->st_name) \ + name = (strtab) + extsym->st_name; \ + else \ + name = (f)->sections[extsym->st_shndx]->name; \ + isym = (typeof(isym)) obj_find_symbol((find), name); \ + } \ + } + +/*======================================================================*/ + + +struct sh64_got_entry +{ + int offset; + unsigned offset_done : 1; + unsigned reloc_done : 1; +}; + +struct sh64_file +{ + struct obj_file root; + struct obj_section *got; +}; + +struct sh64_symbol +{ + struct obj_symbol root; + struct sh64_got_entry gotent; +}; + + +/*======================================================================*/ + +struct obj_file * +arch_new_file (void) +{ + struct sh64_file *f; + f = xmalloc(sizeof(*f)); + f->got = NULL; + return &f->root; +} + +struct obj_section * +arch_new_section (void) +{ + return xmalloc(sizeof(struct obj_section)); +} + +struct obj_symbol * +arch_new_symbol (void) +{ + struct sh64_symbol *sym; + sym = xmalloc(sizeof(*sym)); + memset(&sym->gotent, 0, sizeof(sym->gotent)); + return &sym->root; +} + +enum obj_reloc +arch_apply_relocation (struct obj_file *f, + struct obj_section *targsec, + struct obj_section *symsec, + struct obj_symbol *sym, + Elf32_Rela *rel, + Elf32_Addr v) +{ + struct sh64_file *ifile = (struct sh64_file *)f; + struct sh64_symbol *isym = (struct sh64_symbol *)sym; + + Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset); + Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset; + Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0; + + enum obj_reloc ret = obj_reloc_ok; + + switch (ELF32_R_TYPE(rel->r_info)) + { + case R_SH_NONE: + break; + + case R_SH_DIR32: + *loc += v; + break; + + case R_SH_REL32: + *loc += v - dot; + break; + + case R_SH_PLT32: + *loc = v - dot; + break; + + case R_SH_GLOB_DAT: + case R_SH_JMP_SLOT: + *loc = v; + break; + + case R_SH_RELATIVE: + *loc = f->baseaddr + rel->r_addend; + break; + + case R_SH_GOTPC: + assert(got != 0); + *loc = got - dot + rel->r_addend; + break; + + case R_SH_GOT32: + assert(isym != NULL); + if (!isym->gotent.reloc_done) + { + isym->gotent.reloc_done = 1; + *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v; + } + *loc = isym->gotent.offset + rel->r_addend; + break; + + case R_SH_GOTOFF: + assert(got != 0); + *loc = v - got; + break; + + case R_SH_IMM_MEDLOW16: + case R_SH_IMM_LOW16: + { + Elf32_Addr word; + + if (ELF32_R_TYPE(rel->r_info) == R_SH_IMM_MEDLOW16) + v >>= 16; + + /* + * movi and shori have the format: + * + * | op | imm | reg | reserved | + * 31..26 25..10 9.. 4 3 .. 0 + * + * so we simply mask and or in imm. + */ + word = *loc & ~0x3fffc00; + word |= (v & 0xffff) << 10; + + *loc = word; + } + break; + case R_SH_IMM_MEDLOW16_PCREL: + case R_SH_IMM_LOW16_PCREL: + { + Elf32_Addr word; + + word = *loc & ~0x3fffc00; + + v -= dot; + + if (ELF32_R_TYPE(rel->r_info) == R_SH_IMM_MEDLOW16_PCREL) + { + v >>= 16; + } + + word |= (v & 0xffff) << 10; + + *loc = word; + } + break; + default: + ret = obj_reloc_unhandled; + break; + } + + return ret; +} + +int +arch_create_got (struct obj_file *f) +{ + struct sh64_file *ifile = (struct sh64_file *)f; + int i, n, offset = 0, gotneeded = 0; + + n = ifile->root.header.e_shnum; + for (i = 0; i < n; ++i) + { + struct obj_section *relsec, *symsec, *strsec; + Elf32_Rela *rel, *relend; + Elf32_Sym *symtab; + const char *strtab; + + relsec = ifile->root.sections[i]; + if (relsec->header.sh_type != SHT_REL) + continue; + + symsec = ifile->root.sections[relsec->header.sh_link]; + strsec = ifile->root.sections[symsec->header.sh_link]; + + rel = (Elf32_Rela *)relsec->contents; + relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela)); + symtab = (Elf32_Sym *)symsec->contents; + strtab = (const char *)strsec->contents; + + for (; rel < relend; ++rel) + { + struct sh64_symbol *intsym; + + switch (ELF32_R_TYPE(rel->r_info)) + { + case R_SH_GOTPC: + case R_SH_GOTOFF: + gotneeded = 1; + default: + continue; + + case R_SH_GOT32: + break; + } + + obj_find_relsym(intsym, f, &ifile->root, rel, symtab, strtab); + + if (!intsym->gotent.offset_done) + { + intsym->gotent.offset_done = 1; + intsym->gotent.offset = offset; + offset += 4; + } + } + } + + if (offset > 0 || gotneeded) + ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset); + + return 1; +} + +int +arch_init_module (struct obj_file *f, struct module *mod) +{ + return 1; +} + +int +arch_finalize_section_address(struct obj_file *f, Elf32_Addr base) +{ + int i, n = f->header.e_shnum; + + f->baseaddr = base; + for (i = 0; i < n; ++i) + f->sections[i]->header.sh_addr += base; + return 1; +} + +int +arch_load_proc_section(struct obj_section *sec, int fp) +{ + /* Assume it's just a debugging section that we can safely + ignore ... */ + sec->contents = NULL; + + return 0; +} + +int +arch_archdata (struct obj_file *fin, struct obj_section *sec) +{ + return 0; +} diff -Nur modutils-2.4.25/util/alias.h modutils-2.4.26/util/alias.h --- modutils-2.4.25/util/alias.h 2003-01-28 03:19:52.000000000 +1100 +++ modutils-2.4.26/util/alias.h 2003-10-27 13:00:04.000000000 +1100 @@ -87,6 +87,7 @@ "block-major-91 ide-probe-mod", "block-major-93 nftl", /* from David Woodhouse */ "block-major-97 pg", + "block-major-113 viocd", #if !defined(__s390__) && !defined(__s390x__) "char-major-4 serial", @@ -118,8 +119,10 @@ "char-major-10-175 agpgart", /* /dev/agpgart GART AGP mapping access */ "char-major-10-184 microcode", /* Tigran Aivazian */ "char-major-10-200 tun", /* Universal TUN/TAP device driver */ + "char-major-10-250 hci_vhci", "char-major-13 input", + "char-major-13-0 joydev", "char-major-13-32 mousedev", "char-major-14 soundcore", "char-major-19 cyclades", @@ -127,7 +130,7 @@ "char-major-21 sg", "char-major-22 pcxx", /* ?? */ "char-major-23 pcxx", /* ?? */ - "char-major-27 ftape", + "char-major-27 zftape", "char-major-34 scc", "char-major-35 tclmidi", "char-major-36 netlink", @@ -148,6 +151,7 @@ "char-major-195 NVdriver", "char-major-200 vxspec", "char-major-206 osst", /* OnStream SCSI tape */ + "char-major-216 rfcomm", "dos msdos", "dummy0 dummy", @@ -170,10 +174,13 @@ /* PF_AAL5 8 Reserved for Werner's ATM */ /* PF_X25 9 Reserved for X.25 project */ "net-pf-10 off", /* PF_INET6 10 IP version 6 */ + "net-pf-15 af_key", /* PF_KEY 15 Key Management API */ /* next two from Thanks! */ "net-pf-17 af_packet", "net-pf-19 off", /* acorn econet */ + + "net-pf-31 bluez", "netalias-2 ip_alias", @@ -187,6 +194,11 @@ "irda-dongle-5 litelink", "irda-dongle-6 airport", "irda-dongle-7 old_belkin", + + "bt-proto-0 l2cap", + "bt-proto-2 sco", + "bt-proto-3 rfcomm", + "bt-proto-4 bnep", "plip0 plip", "plip1 plip", @@ -211,6 +223,7 @@ "tty-ldisc-3 ppp_async", "tty-ldisc-11 irtty", /* IrDA over a normal serial port, or a serial port compatible IrDA port */ "tty-ldisc-14 ppp_synctty", + "tty-ldisc-15 hci_uart", "ppp-compress-18 ppp_mppe", "ppp-compress-21 bsd_comp", "ppp-compress-24 ppp_deflate", @@ -224,6 +237,18 @@ "usbdevfs usbcore", + "xfrm-type-2-50 esp4", + "xfrm-type-2-51 ah4", + "xfrm-type-2-108 ipcomp", + "xfrm-type-10-50 esp6", + "xfrm-type-10-51 ah6", + "xfrm-type-10-108 ipcomp6", + + "cipher_null crypto_null", + "digest_null crypto_null", + "compress_null crypto_null", + "sha384 sha512", + NULL /* marks the end of the list! */ }; diff -Nur modutils-2.4.25/util/config.c modutils-2.4.26/util/config.c --- modutils-2.4.25/util/config.c 2002-11-25 15:01:57.000000000 +1100 +++ modutils-2.4.26/util/config.c 2003-10-26 22:28:14.000000000 +1100 @@ -215,6 +215,32 @@ } /* + * Read a line using fgets, expanding the buffer as necessary until \n is + * seen. If *p_buf is NULL the sizebuf is ignored, otherwise sizebuf must + * contain the malloc() size of *p_buf. + */ +static char *fgets_local(char **p_buf, int *sizebuf, FILE * fin) +{ + char *p; + char *ret = NULL; + if (!*p_buf) + *p_buf = xmalloc(*sizebuf = 3000); + **p_buf = '\0'; + p = *p_buf; + while (1) { + ret = fgets(p, *p_buf + *sizebuf - p, fin); + if (!ret || strrchr(p, '\n')) + break; + *p_buf = xrealloc(*p_buf, *sizebuf + 3000); + p = *p_buf + *sizebuf - 1; + *sizebuf += 3000; + } + if (**p_buf) + ret = *p_buf; + return ret; +} + +/* * Read a line of a configuration file and process continuation lines. * Return buf, or NULL if EOF. * Blank at the end of line are always stripped. @@ -223,23 +249,21 @@ * Continuation character is \ * Comment character is # */ -char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno) +char *fgets_strip(char **p_buf, int *sizebuf, FILE * fin, int *lineno) { - int nocomment = 1; /* No comments found ? */ - int contline = 0; - char *start = buf; char *ret = NULL; + char *buf; + char *buf_prev = NULL; char comchar = '#'; char contchar = '\\'; - *buf = '\0'; - while (fgets(buf, sizebuf, fin) != NULL) { + while ((buf = fgets_local(p_buf, sizebuf, fin)) != NULL) { + char *start = buf; char *end = strip_end(buf); char *pt = strchr(buf, comchar); if (pt != NULL) { - nocomment = 0; *pt = '\0'; end = strip_end(buf); } @@ -247,9 +271,23 @@ if (lineno != NULL) (*lineno)++; ret = start; - if (contline) { - char *pt = buf; - + if (buf_prev) { + /* this is a continuation line, append to the previous + * buffer which becomes the current buffer. White space + * at the start of the continuation line is replaced by + * a single space. + */ + int buf_prev_len = strlen(buf_prev); + buf_prev = xrealloc(buf_prev, buf_prev_len + *sizebuf); + memcpy(buf_prev + buf_prev_len, *p_buf, *sizebuf); + *sizebuf += buf_prev_len; + free(*p_buf); + *p_buf = buf_prev; + buf_prev = NULL; + buf = *p_buf + buf_prev_len; + pt = buf; + start = buf; + end = strip_end(buf); while (isspace(*pt)) pt++; if (pt > buf + 1) { @@ -263,10 +301,10 @@ if (end > buf && *(end - 1) == contchar) { if (end == buf + 1 || *(end - 2) != contchar) { /* Continuation */ - contline = 1; end--; *end = '\0'; - buf = end; + buf_prev = *p_buf; + *p_buf = NULL; } else { *(end - 1) = '\0'; break; @@ -492,7 +530,8 @@ int ret = 0; int state[MAX_LEVEL + 1]; /* nested "if" */ int level = 0; - char buf[3000]; + int sizebuf; + char *buf = NULL; char tmpline[PATH_MAX]; char **pathp; char *envpath; @@ -759,8 +798,10 @@ char path[PATH_MAX]; snprintf(path, sizeof(path), "%s%s/%s", base_dir, *pathp, *type); - if (meta_expand(path, &g, NULL, version, ME_ALL)) - return -1; + if (meta_expand(path, &g, NULL, version, ME_ALL)) { + ret = -1; + goto out; + } for (glb = g.pathv; glb && *glb; ++glb) { modpath[nmodpath].type = xstrdup(*type); @@ -785,7 +826,8 @@ ((conf_file = getenv("MODULECONFIG")) != NULL && *conf_file && !safemode)) { if (!(fin = fopen(conf_file, "r"))) { error("Can't open %s", conf_file); - return -1; + ret = -1; + goto out; } conf_file_specified = 1; } else { @@ -858,7 +900,7 @@ /* * Finally, decode the file */ - while (fin && fgets_strip(buf, sizeof(buf) - 1, fin, &lineno) != NULL) { + while (fin && fgets_strip(&buf, &sizebuf, fin, &lineno) != NULL) { char *arg2; char *parm = buf; char *arg; @@ -902,7 +944,8 @@ --level; else { error("unmatched endif in line %d", lineno); - return -1; + ret = -1; + goto out; } continue; } @@ -913,7 +956,8 @@ if (!assgn && strcmp(parm, "else") == 0) { if (level <= 0) { error("else without if in line %d", lineno); - return -1; + ret = -1; + goto out; } state[level] = !state[level]; continue; @@ -925,7 +969,8 @@ if (!assgn && strcmp(parm, "elseif") == 0) { if (level <= 0) { error("elseif without if in line %d", lineno); - return -1; + ret = -1; + goto out; } if (state[level] != 0) { /* @@ -957,7 +1002,8 @@ if (level >= MAX_LEVEL) { error("Too many nested if's in line %d\n", lineno); - return -1; + ret = -1; + goto out; } state[++level] = 0; /* default false */ @@ -1318,8 +1364,10 @@ /* * Handle the actual path description */ - if (meta_expand(arg, &g, base_dir, version, ME_ALL)) - return -1; + if (meta_expand(arg, &g, base_dir, version, ME_ALL)) { + ret = -1; + goto out; + } for (glb = g.pathv; glb && *glb; ++glb) { modpath[nmodpath].type = xstrdup(type); modpath[nmodpath].path = *glb; @@ -1365,7 +1413,7 @@ } if (ret) - return ret; + goto out; /* else */ if (depth == 0) { @@ -1374,6 +1422,7 @@ ret = gen_file_check(gen_file+i, &g, base_dir, version); } +out: return ret; } diff -Nur modutils-2.4.25/util/Makefile.in modutils-2.4.26/util/Makefile.in --- modutils-2.4.25/util/Makefile.in 2002-03-01 11:39:06.000000000 +1100 +++ modutils-2.4.26/util/Makefile.in 2003-10-28 13:10:19.000000000 +1100 @@ -14,10 +14,13 @@ OBJS = xmalloc.o xrealloc.o xstrcat.o xstrdup.o xsystem.o \ logger.o modstat.o \ - meta_expand.o config.o snap_shot.o arch64.o gzfiles.o sys_nim.o sys_oim.o \ + meta_expand.o config.o snap_shot.o arch64.o gzfiles.o sys_nim.o \ xftw.o ifneq ($(USE_SYSCALL),n) -OBJS += sys_cm.o sys_dm.o sys_gks.o sys_oim.o sys_qm.o +OBJS += sys_cm.o sys_dm.o sys_gks.o sys_qm.o +endif +ifneq ($(COMPAT_2_0),n) +OBJS += sys_oim.o endif meta_expand.o: meta_expand.c diff -Nur modutils-2.4.25/util/xftw.c modutils-2.4.26/util/xftw.c --- modutils-2.4.25/util/xftw.c 2001-03-25 21:13:48.000000000 +1000 +++ modutils-2.4.26/util/xftw.c 2003-10-27 13:41:31.000000000 +1100 @@ -373,9 +373,9 @@ } } /* run known subdirectories first in historical order, "kernel" is now top of list */ - for (i = 0 ; i < t->used; ++i) { - c = t->contents+i; - for (j = 0; tbtype[j]; ++j) { + for (j = 0; tbtype[j]; ++j) { + for (i = 0 ; i < t->used; ++i) { + c = t->contents+i; if (*(c->name) && strcmp(c->name, tbtype[j]) == 0 && S_ISDIR(c->statbuf.st_mode)) {