Index of /pub/X/opengroup/R5contrib/vex

 Name                        Last modified      Size  Description
 Parent Directory                                 -   
 DCandC.doc.tar.Z            1991-05-06 08:00  106K  
 MVEX.doc.6.2.tar.Z          1991-09-30 08:00   78K  
 README                      1991-09-30 08:00  7.4K  
 mvex-install                1991-09-30 08:00  4.6K  
 mvex-r1.tar.Z               1991-09-30 08:00  444K  
 vex-papers.tar.Z            1991-05-06 08:00  270K  
 x92.slides.tar.Z            1992-01-06 07:00  1.5M  

				   MVEX
			    Protocol version 6.2
			     VEXlib version 1.12
			   First software release
			       Sept 26, 1991

This distribution contains MVEX, and although there exists
more source code, it is largely Tek-specific or proprietary; this
should get you up and running.  This README file contains an overview
of the state of the software, and instructions for unpacking,
installing and building this release.

WHAT DOES MVEX EXPRESS?
    video input
	taking a video stream *into* the workstation and
	putting it in a window or pixmap

    video output
	producing a video stream that comes *out* of a window
	or pixmap on the workstation

    hue, brightness, contrast and saturation
	if available on the hardware, these can be adjusted.

    placement, scaling, frame rate, clipping, and overlap limitations
	if the client is interested, the detail of the limitations
	is available without round trip queries to the server;
	if not, they can be ignored.

    ports
	for each video input and output, a set of atoms is provided,
	one for each video port (for example, there may be an RGB port
	and an S-VHS port).

    ownership
	A video manager can be implemented that can be the arbiter for
	the video input and output resources.

WHAT'S NEW?
    This protocol is not greatly different than MVEX 6.0 that I had posted
    in January of this year.  A few minor changes:
      - the RenderVideo request now takes a gc so that you can specify
	a clip mask.
      - the override event gained some new bits so that you could
	tell what has happened.

WHAT WORKS?
    From the protocol standpoint, the entire wire protocol (requests,
    replies, events and errors) are supported by the server and the
    library.  This implies that if you understand most of the protocol,
    you will know what this means.  If you don't, you should read the
    protocol found in extensions/mvex/doc/protocol/.

    To support the protocol, there is the mvex library and a set of
    code for the server which implements the protocol extension.  The
    extension supports video input in the form of a RasterOps SparcCard
    TC/PIP; it supports video output (although we only have proprietary
    hardware and software for this).

    In addition to the library and server, there are eight clients that
    work (that I can give you):  one that is the mvex equivalent of
    xdpyinfo, called mvexinfo; the others are the seven test clients
    that Dave Carver wrote for the Xv extension, so that programmers
    could compare the two extension.  

    This release contains the patches to run under either X11r4 or X11r5.
    Both are tested and run well.  In particular, the server patches for
    R4 include changes for ClipNotify() so that the video can be adjusted
    as windows are moved.  Also included are patches to the cfb code to
    support 24-bit color.  These were originally derived from Takahashi's
    postings around the end of 1990, but now work under both r4 and r5.

    Porting to new hardware should be fairly simple because nearly all of
    the ddx functionality has been generalized and is available in the
    mi directory.  For example, complete clipping code is available
    to maintain an enable plane.

WHAT DOESN'T WORK?
    Nothing that I know of.  Since being reduced from the original VEX
    protocol, it has been much simpler to implement.

UNPACKING THE RELEASE
    This release should be very simple to install.  A fairly fool-proof
    installation script will ask you questions, unpack, install and
    patch everything.  Obtain the release with ftp from
    export.lcs.mit.edu (18.24.0.12) in

	~ftp/contrib/vex/mvex-r1.tar.Z
	~ftp/contrib/vex/mvex-install

    It doesn't matter where you put it, except that install-mvex and
    mvex-r1.tar.Z need to be together.  After that, simply run the script:

	sh install-mvex

    It will ask questions and try to do everything but compile.
    The files and directories are:

	server/ddx/rasterops		    directory of our rasterops server
	extensions/mvex/lib		    mvex lib source
	extensions/mvex/server/ddx/mi	    machine independent layer
	extensions/mvex/server/dix	    dix layer mvex source
	extensions/mvex/server/include	    mvex server-specific include files
	extensions/mvex/include		    most of the mvex include files
	extensions/mvex/doc/protocol	    protocol document source
	extensions/mvex/doc/lib		    mvex lib document source
	extensions/mvex/doc/encoding	    encoding document source
	extensions/mvex/clients/mvexinfo    mvex equivalent of xdpyinfo
	extensions/mvex/clients/test	    seven test clients

    The diffs are different for r4 and r5, but they accomplish the same
    thing:

	config/sun.cf			adds mvex and rasterops
	extensions/Imakefile		adds mvex to the directories built
	extensions/server/Imakefile	adds ../mvex to the directories built
	server/Imakefile		adds rasterops and mvex
	server/ddx/cfb/*		24-bit color support
	server/ddx/mi/miinitext.c	adds MvexExtensionInit();
	server/ddx/mi/mivaltree.c	ClipNotify() mods (r4 only)
	server/ddx/sun/*		rasterops mods
	server/dix/dispatch.c		changes CreatePixmap and CreateColormap
	server/dix/window.c		changes CreateWindow, and ClipNotify()
	server/include/scrnintstr.h	ClipNotify() mods (r4 only)

    The files are diffs based on R4 and R5, so they should patch in
    very easily.  Hopefully, the files provide enough context to
    discern the intent in case there are problems.

    For R4, the changes for ClipNotify marked above should be pretty
    safe except for server/ddx/mi/mivaltree.c.  The same spirit of
    changes have been adopted into R5.  The are necessary, otherwise
    the lowest layer ddx cannot be notified when the clip changes (and
    your RenderVideo will continue blasting bits where it shouldn't).

BUILDING THE RELEASE
    Again, the patches are based on vanilla R4 and vanilla R5 and the
    installation has been tested for precisely that.  At this point, if
    you were to try to build our server, you would need to start with a

	make World

    If you have already built an X tree, you can do this with a
    little less overkill with the commands:

	make Makefile
	make -k Makefiles SUBDIRS="extensions server"
	make -k includes		# very, very important
	make -k depend
	make -k

    There is a little hocus-pocus in the way that makefiles are
    generated, such that you should *not* use xmkmf to generate
    the Makefile in extensions/mvex/include or any Makefile leading
    to it, otherwise the 'make includes' pass will create include
    files that point to the wrong place.

    At this point, you are on your own (unless you have a Sun SparcStation)
    with a RasterOps board.   I'll be sending out patches as
    appropriate.  Send bugs directly to me (toddb@sail.labs.tek.com)

RASTEROPS NOTES

    You must be running the 3.1 version of the driver and compile the
    server against the 3.1 version of cg8reg.h.  These are provided
    for you in the distribution in
    extensions/mvex/server/ddx/rasterops/3.1-driver.  In that directory
    are four files.  They are placed as follows:

	cg8reg.h		/usr/include/sbusdev
	sparc_card_tc		/etc/modules
	sparc_card_tc.o		/etc/modules
	sparc_card_tc.script	/etc/modules

    After installing these, reboot and you can run the server.


Good luck!!

internet: toddb@sail.labs.tek.com                                 c--Q Q
US:       Todd Brunhoff; Systems Architecture and Imaging Lab;          `
          Tektronix, Inc.;  Box 500  MS 50-321, Beaverton OR 97077      -
Phone:    (503) 627-1121