--- 2.3.36pre3/drivers/char/rtc.c	Wed Nov 24 18:22:04 1999
+++ 2.3.36pre3-alpha/drivers/char/rtc.c	Mon Jan  3 02:06:35 2000
@@ -126,6 +126,7 @@
 static const unsigned char days_in_mo[] = 
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
+#ifndef __alpha__
 /*
  *	A very tiny interrupt handler. It runs with SA_INTERRUPT set,
  *	so that there is no possibility of conflicting with the
@@ -150,6 +151,7 @@
 	if (rtc_status & RTC_TIMER_ON)
 		mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
 }
+#endif
 
 /*
  *	Now all the various file operations that we export.
@@ -163,6 +165,9 @@
 static ssize_t rtc_read(struct file *file, char *buf,
 			size_t count, loff_t *ppos)
 {
+#ifdef __alpha__
+	return -EIO;
+#else
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long data;
 	ssize_t retval;
@@ -194,6 +199,7 @@
 	remove_wait_queue(&rtc_wait, &wait);
 
 	return retval;
+#endif
 }
 
 static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
@@ -204,6 +210,7 @@
 	struct rtc_time wtime; 
 
 	switch (cmd) {
+#ifndef __alpha__
 	case RTC_AIE_OFF:	/* Mask alarm int. enab. bit	*/
 	{
 		mask_rtc_irq_bit(RTC_AIE);
@@ -251,6 +258,7 @@
 		set_rtc_irq_bit(RTC_UIE);
 		return 0;
 	}
+#endif
 	case RTC_ALM_READ:	/* Read the present alarm time */
 	{
 		/*
@@ -386,6 +394,7 @@
 		restore_flags(flags);
 		return 0;
 	}
+#ifndef __alpha__
 	case RTC_IRQP_READ:	/* Read the periodic IRQ rate.	*/
 	{
 		return put_user(rtc_freq, (unsigned long *)arg);
@@ -426,7 +435,7 @@
 		restore_flags(flags);
 		return 0;
 	}
-#ifdef __alpha__
+#else
 	case RTC_EPOCH_READ:	/* Read the epoch.	*/
 	{
 		return put_user (epoch, (unsigned long *)arg);
@@ -472,6 +481,7 @@
 
 static int rtc_release(struct inode *inode, struct file *file)
 {
+#ifndef __alpha__
 	/*
 	 * Turn off all interrupts once the device is no longer
 	 * in use, and clear the data.
@@ -495,6 +505,7 @@
 		del_timer(&rtc_irq_timer);
 	}
 
+#endif
 	MOD_DEC_USE_COUNT;
 
 	rtc_irq_data = 0;
@@ -502,6 +513,7 @@
 	return 0;
 }
 
+#ifndef __alpha__
 static unsigned int rtc_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &rtc_wait, wait);
@@ -509,6 +521,7 @@
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
+#endif
 
 /*
  *	The various file operations we support.
@@ -519,7 +532,11 @@
 	rtc_read,
 	NULL,		/* No write */
 	NULL,		/* No readdir */
+#ifdef __alpha__
+	NULL,
+#else
 	rtc_poll,
+#endif
 	rtc_ioctl,
 	NULL,		/* No mmap */
 	rtc_open,
@@ -577,12 +594,14 @@
 	}
 	misc_register(&rtc_dev);
 #else
+#ifndef __alpha__
 	if(request_irq(RTC_IRQ, rtc_interrupt, SA_INTERRUPT, "rtc", NULL))
 	{
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
 		return -EIO;
 	}
+#endif
 	misc_register(&rtc_dev);
 	create_proc_read_entry ("rtc", 0, NULL, rtc_read_proc, NULL);
 
@@ -619,6 +638,7 @@
 	if (guess)
 		printk("rtc: %s epoch (%lu) detected\n", guess, epoch);
 #endif
+#ifndef __alpha__
 	init_timer(&rtc_irq_timer);
 	rtc_irq_timer.function = rtc_dropped_irq;
 	save_flags(flags);
@@ -626,6 +646,7 @@
 	/* Initialize periodic freq. to CMOS reset default, which is 1024Hz */
 	CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), RTC_FREQ_SELECT);
 	restore_flags(flags);
+#endif
 	rtc_freq = 1024;
 	return 0;
 }
@@ -649,6 +670,7 @@
 module_exit(rtc_exit);
 EXPORT_NO_SYMBOLS;
 
+#ifndef __alpha__
 /*
  * 	At IRQ rates >= 4096Hz, an interrupt may get lost altogether.
  *	(usually during an IDE disk interrupt, with IRQ unmasking off)
@@ -675,6 +697,7 @@
 	rtc_irq_data |= (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);	/* restart */
 	restore_flags(flags);
 }
+#endif
 
 /*
  *	Info exported via "/proc/rtc".
@@ -863,6 +886,7 @@
 	}
 }
 
+#ifndef __alpha__
 /*
  * Used to disable/enable interrupts for any one of UIE, AIE, PIE.
  * Rumour has it that if you frob the interrupt enable/disable
@@ -902,3 +926,4 @@
 	rtc_irq_data = 0;
 	restore_flags(flags);
 }
+#endif