Index of /pub/net/bind/9.9.6
Name Last modified Size Description
![[PARENTDIR]](/icons/back.gif)
Parent Directory -
![[ ]](/icons/unknown.gif)
srcid 2014-09-30 01:10 15
![[DIR]](/icons/folder.gif)
doc/ 2014-09-23 22:08 -
bind-9.9.6.tar.gz.sha512.asc 2014-09-30 01:10 490
bind-9.9.6.tar.gz.sha256.asc 2014-09-30 01:10 490
bind-9.9.6.tar.gz.sha1.asc 2014-09-30 01:10 490
bind-9.9.6.tar.gz.asc 2014-09-30 01:10 490
![[ ]](/icons/compressed.gif)
bind-9.9.6.tar.gz 2014-09-30 01:10 7.4M
![[TXT]](/icons/text.gif)
RELEASE-NOTES-BIND-9.9.6.txt 2014-09-30 01:10 6.1K
README 2014-09-30 01:10 14K
COPYRIGHT 2014-09-30 01:10 27K
CHANGES 2014-09-30 01:10 400K
BIND9.9.6.x86.zip.sha512.asc 2014-09-30 01:10 490
BIND9.9.6.x86.zip.sha256.asc 2014-09-30 01:10 490
BIND9.9.6.x86.zip.sha1.asc 2014-09-30 01:10 490
BIND9.9.6.x86.zip.asc 2014-09-30 01:10 490
BIND9.9.6.x86.zip 2014-09-30 01:10 6.4M
BIND9.9.6.x64.zip.sha512.asc 2014-09-30 01:10 490
BIND9.9.6.x64.zip.sha256.asc 2014-09-30 01:10 490
BIND9.9.6.x64.zip.sha1.asc 2014-09-30 01:10 490
BIND9.9.6.x64.zip.asc 2014-09-30 01:10 490
BIND9.9.6.x64.zip 2014-09-30 01:10 12M
BIND9.9.6.debug.x86.zip.sha512.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x86.zip.sha256.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x86.zip.sha1.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x86.zip.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x86.zip 2014-09-30 01:10 13M
BIND9.9.6.debug.x64.zip.sha512.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x64.zip.sha256.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x64.zip.sha1.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x64.zip.asc 2014-09-30 01:10 490
BIND9.9.6.debug.x64.zip 2014-09-30 01:10 33M
BIND 9
BIND version 9 is a major rewrite of nearly all aspects of the
underlying BIND architecture. Some of the important features of
BIND 9 are:
- DNS Security
DNSSEC (signed zones)
TSIG (signed DNS requests)
- IP version 6
Answers DNS queries on IPv6 sockets
IPv6 resource records (AAAA)
Experimental IPv6 Resolver Library
- DNS Protocol Enhancements
IXFR, DDNS, Notify, EDNS0
Improved standards conformance
- Views
One server process can provide multiple "views" of
the DNS namespace, e.g. an "inside" view to certain
clients, and an "outside" view to others.
- Multiprocessor Support
- Improved Portability Architecture
BIND version 9 development has been underwritten by the following
organizations:
Sun Microsystems, Inc.
Hewlett Packard
Compaq Computer Corporation
IBM
Process Software Corporation
Silicon Graphics, Inc.
Network Associates, Inc.
U.S. Defense Information Systems Agency
USENIX Association
Stichting NLnet - NLnet Foundation
Nominum, Inc.
For a summary of functional enhancements in previous
releases, see the HISTORY file.
For a detailed list of user-visible changes from
previous releases, see the CHANGES file.
For up-to-date release notes and errata, see
http://www.isc.org/software/bind9/releasenotes
BIND 9.9.6
BIND 9.9.6 is a maintenance release, and also includes
the following new functionality.
- The former behavior with respect to capitalization of names
(prior to BIND 9.9.5) can be restored for specific clients via
the new "no-case-compress" ACL.
BIND 9.9.5
BIND 9.9.5 is a maintenance release, and patches the security
flaws described in CVE-2013-6320 and CVE-2014-0591. It also
includes the following functional enhancements:
- "named" now preserves the capitalization of names when
responding to queries.
- new "dnssec-importkey" command allows the use of offline
DNSSEC keys with automatic DNSKEY management.
- When re-signing a zone, the new "dnssec-signzone -Q" option
drops signatures from keys that are still published but are
no longer active.
- "named-checkconf -px" will print the contents of configuration
files with the shared secrets obscured, making it easier to
share configuration (e.g. when submitting a bug report)
without revealing private information.
BIND 9.9.4
BIND 9.9.4 is a maintenance release, and patches the security
flaws described in CVE-2013-3919 and CVE-2013-4854. It also
introduces DNS Response Rate Limiting (DNS RRL) as a
compile-time option. To use this feature, configure with
the "--enable-rrl" option.
BIND 9.9.3
BIND 9.9.3 is a maintenance release and patches the security
flaws described in CVE-2012-5688, CVE-2012-5689 and CVE-2013-2266.
BIND 9.9.2
BIND 9.9.2 is a maintenance release and patches the security
flaw described in CVE-2012-4244.
BIND 9.9.1
BIND 9.9.1 is a maintenance release.
BIND 9.9.0
BIND 9.9.0 includes a number of changes from BIND 9.8 and earlier
releases. New features include:
- Inline signing, allowing automatic DNSSEC signing of
master zones without modification of the zonefile, or
"bump in the wire" signing in slaves.
- NXDOMAIN redirection.
- New 'rndc flushtree' command clears all data under a given
name from the DNS cache.
- New 'rndc sync' command dumps pending changes in a dynamic
zone to disk without a freeze/thaw cycle.
- New 'rndc signing' command displays or clears signing status
records in 'auto-dnssec' zones.
- NSEC3 parameters for 'auto-dnssec' zones can now be set prior
to signing, eliminating the need to initially sign with NSEC.
- Startup time improvements on large authoritative servers.
- Slave zones are now saved in raw format by default.
- Several improvements to response policy zones (RPZ).
- Improved hardware scalability by using multiple threads
to listen for queries and using finer-grained client locking
- The 'also-notify' option now takes the same syntax as
'masters', so it can used named masterlists and TSIG keys.
- 'dnssec-signzone -D' writes an output file containing only DNSSEC
data, which can be included by the primary zone file.
- 'dnssec-signzone -R' forces removal of signatures that are
not expired but were created by a key which no longer exists.
- 'dnssec-signzone -X' allows a separate expiration date to
be specified for DNSKEY signatures from other signatures.
- New '-L' option to dnssec-keygen, dnssec-settime, and
dnssec-keyfromlabel sets the default TTL for the key.
- dnssec-dsfromkey now supports reading from standard input,
to make it easier to convert DNSKEY to DS.
- RFC 1918 reverse zones have been added to the empty-zones
table per RFC 6303.
- Dynamic updates can now optionally set the zone's SOA serial
number to the current UNIX time.
- DLZ modules can now retrieve the source IP address of
the querying client.
- 'request-ixfr' option can now be set at the per-zone level.
- 'dig +rrcomments' turns on comments about DNSKEY records,
indicating their key ID, algorithm and function
- Simplified nsupdate syntax and added readline support
Building
BIND 9 currently requires a UNIX system with an ANSI C compiler,
basic POSIX support, and a 64 bit integer type.
We've had successful builds and tests on the following systems:
COMPAQ Tru64 UNIX 5.1B
Fedora Core 6
FreeBSD 4.10, 5.2.1, 6.2
HP-UX 11.11
Mac OS X 10.5
NetBSD 3.x, 4.0-beta, 5.0-beta
OpenBSD 3.3 and up
Solaris 8, 9, 9 (x86), 10
Ubuntu 7.04, 7.10
Windows XP/2003/2008
NOTE: As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of
Windows, including Windows NT and Windows 2000, are no longer
supported.
We have recent reports from the user community that a supported
version of BIND will build and run on the following systems:
AIX 4.3, 5L
CentOS 4, 4.5, 5
Darwin 9.0.0d1/ARM
Debian 4, 5, 6
Fedora Core 5, 7, 8
FreeBSD 6, 7, 8
HP-UX 11.23 PA
MacOS X 10.5, 10.6, 10.7
Red Hat Enterprise Linux 4, 5, 6
SCO OpenServer 5.0.6
Slackware 9, 10
SuSE 9, 10
To build, just
./configure
make
Do not use a parallel "make".
Several environment variables that can be set before running
configure will affect compilation:
CC
The C compiler to use. configure tries to figure
out the right one for supported systems.
CFLAGS
C compiler flags. Defaults to include -g and/or -O2
as supported by the compiler. Please include '-g'
if you need to set CFLAGS.
STD_CINCLUDES
System header file directories. Can be used to specify
where add-on thread or IPv6 support is, for example.
Defaults to empty string.
STD_CDEFINES
Any additional preprocessor symbols you want defined.
Defaults to empty string.
Possible settings:
Change the default syslog facility of named/lwresd.
-DISC_FACILITY=LOG_LOCAL0
Enable DNSSEC signature chasing support in dig.
-DDIG_SIGCHASE=1 (sets -DDIG_SIGCHASE_TD=1 and
-DDIG_SIGCHASE_BU=1)
Disable dropping queries from particular well known ports.
-DNS_CLIENT_DROPPORT=0
Sibling glue checking in named-checkzone is enabled by default.
To disable the default check set. -DCHECK_SIBLING=0
named-checkzone checks out-of-zone addresses by default.
To disable this default set. -DCHECK_LOCAL=0
To create the default pid files in ${localstatedir}/run rather
than ${localstatedir}/run/{named,lwresd}/ set.
-DNS_RUN_PID_DIR=0
Enable workaround for Solaris kernel bug about /dev/poll
-DISC_SOCKET_USE_POLLWATCH=1
The watch timeout is also configurable, e.g.,
-DISC_SOCKET_POLLWATCH_TIMEOUT=20
LDFLAGS
Linker flags. Defaults to empty string.
The following need to be set when cross compiling.
BUILD_CC
The native C compiler.
BUILD_CFLAGS (optional)
BUILD_CPPFLAGS (optional)
Possible Settings:
-DNEED_OPTARG=1 (optarg is not declared in <unistd.h>)
BUILD_LDFLAGS (optional)
BUILD_LIBS (optional)
To build shared libraries, specify "--with-libtool" on the
configure command line.
For the server to support DNSSEC, you need to build it
with crypto support. You must have OpenSSL 0.9.5a
or newer installed and specify "--with-openssl" on the
configure command line. If OpenSSL is installed under
a nonstandard prefix, you can tell configure where to
look for it using "--with-openssl=/prefix".
On some platforms it is necessary to explictly request large
file support to handle files bigger than 2GB. This can be
done by "--enable-largefile" on the configure command line.
On some platforms, BIND 9 can be built with multithreading
support, allowing it to take advantage of multiple CPUs.
You can specify whether to build a multithreaded BIND 9
by specifying "--enable-threads" or "--disable-threads"
on the configure command line. The default is operating
system dependent.
Support for the "fixed" rrset-order option can be enabled
or disabled by specifying "--enable-fixed-rrset" or
"--disable-fixed-rrset" on the configure command line.
The default is "disabled", to reduce memory footprint.
If your operating system has integrated support for IPv6, it
will be used automatically. If you have installed KAME IPv6
separately, use "--with-kame[=PATH]" to specify its location.
"make install" will install "named" and the various BIND 9 libraries.
By default, installation is into /usr/local, but this can be changed
with the "--prefix" option when running "configure".
You may specify the option "--sysconfdir" to set the directory
where configuration files like "named.conf" go by default,
and "--localstatedir" to set the default parent directory
of "run/named.pid". For backwards compatibility with BIND 8,
--sysconfdir defaults to "/etc" and --localstatedir defaults to
"/var" if no --prefix option is given. If there is a --prefix
option, sysconfdir defaults to "$prefix/etc" and localstatedir
defaults to "$prefix/var".
To see additional configure options, run "configure --help".
Note that the help message does not reflect the BIND 8
compatibility defaults for sysconfdir and localstatedir.
If you're planning on making changes to the BIND 9 source, you
should also "make depend". If you're using Emacs, you might find
"make tags" helpful.
If you need to re-run configure please run "make distclean" first.
This will ensure that all the option changes take.
Building with gcc is not supported, unless gcc is the vendor's usual
compiler (e.g. the various BSD systems, Linux).
Known compiler issues:
* gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86.
* gcc prior to gcc-3.2.3 ultrasparc generates incorrect code at -02.
* gcc-3.3.5 powerpc generates incorrect code at -02.
* Irix, MipsPRO 7.4.1m is known to cause problems.
A limited test suite can be run with "make test". Many of
the tests require you to configure a set of virtual IP addresses
on your system, and some require Perl; see bin/tests/system/README
for details.
SunOS 4 requires "printf" to be installed to make the shared
libraries. sh-utils-1.16 provides a "printf" which compiles
on SunOS 4.
Known limitations
Linux requires kernel build 2.6.39 or later to get the
performance benefits from using multiple sockets.
Documentation
The BIND 9 Administrator Reference Manual is included with the
source distribution in DocBook XML and HTML format, in the
doc/arm directory.
Some of the programs in the BIND 9 distribution have man pages
in their directories. In particular, the command line
options of "named" are documented in /bin/named/named.8.
There is now also a set of man pages for the lwres library.
If you are upgrading from BIND 8, please read the migration
notes in doc/misc/migration. If you are upgrading from
BIND 4, read doc/misc/migration-4to9.
Frequently asked questions and their answers can be found in
FAQ.
Additional information on various subjects can be found
in the other README files.
Change Log
A detailed list of all changes to BIND 9 is included in the
file CHANGES, with the most recent changes listed first.
Change notes include tags indicating the category of the
change that was made; these categories are:
[func] New feature
[bug] General bug fix
[security] Fix for a significant security flaw
[experimental] Used for new features when the syntax
or other aspects of the design are still
in flux and may change
[port] Portability enhancement
[maint] Updates to built-in data such as root
server addresses and keys
[tuning] Changes to built-in configuration defaults
and constants to improve performanceo
[protocol] Updates to the DNS protocol such as new
RR types
[test] Changes to the automatic tests, not
affecting server functionality
[cleanup] Minor corrections and refactoring
[doc] Documentation
[contrib] Changes to the contributed tools and
libraries in the 'contrib' subdirectory
[placeholder] Used in the master development branch to
reserve change numbers for use in other
branches, e.g. when fixing a bug that only
exists in older releases
In general, [func] and [experimental] tags will only appear
in new-feature releases (i.e., those with version numbers
ending in zero). Some new functionality may be backported to
older releases on a case-by-case basis. All other change
types may be applied to all currently-supported releases.
Bug Reports and Mailing Lists
Bug reports should be sent to:
bind9-bugs@isc.org
Feature requests can be sent to:
bind-suggest@isc.org
To join or view the archives of the BIND Users mailing list,
visit:
https://lists.isc.org/mailman/listinfo/bind-users
If you're planning on making changes to the BIND 9 source
code, you may also want to join the BIND Workers mailing
list:
https://lists.isc.org/mailman/listinfo/bind-workers
Information on read-only Git access, coding style and developer
guidelines can be found at:
http://www.isc.org/git/